C3K15752.4 GHz Short Range RF Module

Microsoft Corporation Xbox 360 Video Game and Entertainment System Position Your Xbox Connect to Your TV Electrical Safety Connect to Power Set Up Your Controller Set Up Your Headset Choose Your Family's Experience Play Discs Set Up Storage Set Up Your Home Network Join Xbox LIVE Share Music, Pictures, and Videos Troubleshoot Take Care of Your Xbox Healthy Playing Limited Warranty and Returns Regulations Copyright Customer Support WARNING [IMAGE: alert.jpg ] Failure to properly set up, use, and care for the Xbox 360 video game and entertainment system can increase the risk of serious injury or death, or damage to the Xbox 360 video game and entertainment system. Read this manual and the manuals of any accessories for important safety and health information. Keep all manuals for future reference. For replacement manuals, go to www.xbox.com/support. Before allowing children to use the Xbox 360 video game and entertainment system: 1 Determine how each child can use the Xbox 360 console (playing games, connecting to Xbox LIVE, replacing batteries, making electrical, AV cable, and network connections) and whether they should be supervised during these activities. 2 If you allow children to use the Xbox 360 console without supervision, be sure to explain all relevant safety and health information and instructions. The Xbox 360 console will not play copied or “pirated” games or other unauthorized media. Attempting to defeat the Xbox 360 anti-piracy protection system may cause your Xbox 360 console to stop working permanently. It will also void your Limited Warranty, and may make your Xbox 360 console ineligible for authorized repair, even for a fee. BY USING YOUR XBOX 360 YOU AGREE TO THE WARRANTY IN THIS MANUAL. BEFORE SETTING UP YOUR XBOX 360, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT ACCEPT THIS WARRANTY, DO NOT USE YOUR XBOX 360. RETURN IT TO MICROSOFT FOR A REFUND. [IMAGE: Alert.jpg ] This symbol identifies safety and health messages in this manual and Xbox 360 accessories manuals. For your warranty and other important information, see the Xbox 360 Warranty manual. POSITION YOUR XBOX Orientation You can position yourconsole horizontally or vertically, whichever you prefer. However, change console orientation from one to the other only when it is turned off with no disc in the tray. Prevent the Console from Falling [IMAGE: Alert.jpg ] If the Xbox 360 console falls and hits someone, especially a small child, it could cause serious injury. To reduce the risk of such injuries and damage to the Xbox 360 console, set up the Xbox 360 console according to these instructions. Place the console on a surface that: • Is flat and level. • Is stable and not likely to tip over. • Allows all four feet of the console to be in contact with the surface. • Is not likely to allow the console to slip or slide off. • Is clean and free of dust and debris. If the surface or console feet become dirty or dusty, clean them with a dry cloth. If the console is positioned vertically, put it on a surface where it is not likely to fall if it tips over. Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. When the console is not in use, you may need to disconnect all cables and cords from the front and rear of the console to keep them out of the reach of children and pets. Do not allow children to play with cables and cords. Prevent the Console from Overheating Do not block any ventilation openings on the console or power supply. Do not place the console or power supply on a bed, sofa, or other soft surface that may block ventilation openings. Do not place the console or power supply in a confined space, such as a bookcase, rack, or stereo cabinet, unless the space is well ventilated. Do not place the console or power supply near any heat sources, such as radiators, heat registers, stoves, or amplifiers. Avoid Smoke and Dust Do not use the console in smoky or dusty locations. Smoke and dust can damage the console, particularly the DVD drive. CONNECT YOUR TV Connect the AV Cable ART OF COMPOSITE CONNECTION To connect to your standard TV with composite: 1 Connect the AV cable to the AV port on the console. 2 Set the switch on the cable to TV. 3 Connect the yellow color-banded composite connector on the cable to the yellow input on your TV. Leave the red, green, and blue video connectors unconnected. 4 Connect the solid color left and right (white and red) audio connectors on the cable to the audio inputs on your TV. Don't confuse the redaudio connector with the red video connector. For mono audio, connect either the right or left audio connector to the single audio input. 5 Select the appropriate video input on your TV (such as "input," "AUX," "Line in," "source" or other TV setting). ART OF COMPONENT CONNECTION To connect to your high definition TV with component: 1 Connect the AV cable connector to the AV port on the console. 2 Set the switch on the AV port connector to HDTV. 3 Connect the red, green, and blue color-banded video connectors on the AV cable to the corresponding color inputs (Y, Cb/Pb, Cr/Pr) on your TV. Leave the yellow color-banded composite connector unconnected. 4 Connect the solid color left and right (white and red) audio connectors on the HD AV cable to the audio inputs on your TV or stereo receiver. 5 Select the appropriate video input on your TV (such as "input," "AUX," "Line in," "source" or other TV setting). After you've set up your console, you can test your connection in the Xbox Dashboard. First, proceed through the steps for connecting to power, connecting your controller, and other settings. Connect to a Digital Audio System ART OF TOSLINK CONNECTION If your system (typically, a receiver or amplifier) supports digital audio input, you can connect to digital audio rather than to the standard left and right audio. Digital audio should produce higher-quality sound. To connect to digita…

Text truncated - open the document above for the full version.

XBOX ONE ACCESSORY IMPORTANT INFORMATION This symbol identifies safety and health messages in this product guide and other product manuals. Read this guide for important safety and health information for the product that you have purchased. WARNING: Failure to properly set up, use, and care for this product can increase the risk of serious injury, death, property damage, or damage to the product or related accessories. Read this guide and keep all printed guides for future reference. For replacement guides, go to xbox.com/durango/useinstructions. WARNING: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock, fire or other hazard, or damage to your Xbox One accessory. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty and render the Xbox One accessory ineligible for authorized repair. Modifying your accessory can result in a permanent ban from Xbox Live. USING YOUR ACCESSORY Make Sure Children Play Safely Make sure children using any Xbox One accessory together with the Xbox One console play safely and within their limits, and make sure that they understand proper use of the system. Refer to the Xbox One console guide for more information. WARNING: Choking hazard This device may contain small parts that may be a choking hazard to children under 3. Keep small parts away from children. CAUTION: Cables Arrange any cables and cords so that people and pets are unlikely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. CAUTION: Hearing Safety Extended exposure to high sound volumes when using a headset may result in temporary or permanent hearing loss. To reduce the risk of hearing loss, set the volume loud enough to hear clearly in quiet surroundings, and no louder.  Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing.  Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise-canceling headphones can reduce outside noise so that you don’t have to turn up the volume.  If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise canceling headphones, you should be able to hear nearby people speak. Minimize your time listening to loud sound The more time that you spend exposed to high sound volumes, the more likely you are to damage your hearing. The louder the sound, the less time that is required to damage hearing.  Minimize your time listening to loud sound. At maximum volume, listening to music on the device with headphones can permanently damage your hearing in 15 minutes.  Even lower volumes can damage hearing if you are exposed to it for many hours.  All of the sound that you are exposed to during a day adds up. If you are exposed to other loud sound, it takes less time listening at high volumes to cause hearing damage.  To safely use the device without a time limit, keep the volume low enough that you can carry on a conversation with people nearby. ELECTRICAL SAFETY WARNING: As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock, fire, or damage to Xbox One accessories and console.  Use only an approved charging cable.  Do not allow a wireless device or charging cable to become wet.  Unplug the charging cable during lightning storms or when unused for long periods.  To prevent damage, avoid sitting or stepping on a wireless device, its cable, or the cable plug or connector. Go to xbox.com/durango/electricalsafety for more information. BATTERY POWERED DEVICES WARNING: Battery Safety The following precautions apply to all products that use disposable or rechargeable batteries including lithium polymer. Improper battery use may result in series injury, death, property damage, or damage to the product or related accessories as a result of battery fluid leakage, fire, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury:  Keep batteries out of reach of children.  Remove the batteries if they are worn out or before storing your device for an extended period. Always remove old, weak, or worn- out batteries immediately and recycle or dispose of them in accordance with local and national disposal regulations.  If a battery leaks, remove all batteries by reversing the installation steps provided for this product, being careful to keep the leaked fluid from touching your skin or clothes. If fluid from the battery contacts skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a dry cloth, or follow the battery manufacturer’s recommendations for cleanup.  Do not open, puncture, mutilate, heat, apply direct heat to, or dispose of batteries in fire.  Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries).  Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns.  Do not carry or place batteries together with necklaces, hairpins or other metal objects.  Do not leave a battery-powered device in direct sunlight for an extended period, such as on the dash of car during the summer.  Do not immerse batteries in water or allow them to become wet.  Do not connect batteries directly to wall outlets or car cigarette-lighter sockets.  Do not attempt to connect to the battery…

Text truncated - open the document above for the full version.

CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. Date: May 8, 2013 UL LLC Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize UL LLC, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL LLC on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL LLC as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Pamela Galvan Compliance Engineer Microsoft Corporation REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. May 8, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: C3K1575 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality for a maximum of 180 days for the following documents: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Pamela Galvan Compliance Engineer Microsoft Corporation

CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. Applicant/Grantee Microsoft Corporation FCC ID: C3K1575 Section 15.212 Modular Transmitters Request for Modular Approval Request for Limited Modular Approval Requirements EUT Conditions Comply (Y/N) Single Modular Approval Requirements 1 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Device does not have its own RF shield. Radiated & conducted emissions (15.205, 15.209, 15.207) testing outside and installed in host system. N 2 The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over- modulation. All inputs to the module are buffered through logic or microprocessor inputs. Y 3 The modular transmitter must have its own power supply regulation. Internal 1.8V power regulator. 12MHz crystal provides reference to generate LO frequencies. Y 4 The modular transmitter must comply with the antenna and transmission system requirements of Sections 15.203, 15.204(b) and 15.204(c). The antenna must either be Antennas are permanently connected and non replaceable by the user. Y CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of Section 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 5 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is Device was tested both standalone with Laptop support device and installed in the host system. Y CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in error, please immediately notify us by telephone at the number listed on this cover sheet and return the original message to us at the above address via the United States Postal Service. We will reimburse any costs you incur in notifying us and returning the message to us. Thank you. Microsoft Corporation is an equal opportunity employer. unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see Section 15.31(i)). 6 The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of Refer to label format exhibit Y CONFIDENTIALITY STATEMENT The information contained in this facsimile message is legally privileged and confidential information intended only for the use of the addressee listed on this cover sheet. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this facsimile is strictly prohibited. If you have received this facsimile in…

Text truncated - open the document above for the full version.

PROPOSED FCC/IC ID LABEL AND LOCATION Bottom of Module FCC /IC Label Location MICROSOFT CORPORATION FCC ID: C3K1575 IC: 3048A-1575 Model: 1575 PROPOSED FCC/IC ID LABEL FOR HOST DEVICE MICROSOFT CORPORATION This device contains FCC ID: C3K1575 AND IC: 3048A-1575

REPORT NO: 12U14758-1C DATE: June 10, 2013 FCC ID: C3K1575 IC: 3048A-1575 Page 64 of 68 UL CCS FORM NO: CCSUP4701G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 12. SETUP PHOTOS 12.1. ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 12U14758-1C DATE: June 10, 2013 FCC ID: C3K1575 IC: 3048A-1575 Page 65 of 68 UL CCS FORM NO: CCSUP4701G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 12.2. RADIATED RF MEASUREMENT SETUP RADIATED FRONT PHOTO REPORT NO: 12U14758-1C DATE: June 10, 2013 FCC ID: C3K1575 IC: 3048A-1575 Page 66 of 68 UL CCS FORM NO: CCSUP4701G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. RADIATED BACK PHOTO REPORT NO: 12U14758-1C DATE: June 10, 2013 FCC ID: C3K1575 IC: 3048A-1575 Page 67 of 68 UL CCS FORM NO: CCSUP4701G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. 12.3. POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP LINE CONDUCTED FRONT PHOTO REPORT NO: 12U14758-1C DATE: June 10, 2013 FCC ID: C3K1575 IC: 3048A-1575 Page 68 of 68 UL CCS FORM NO: CCSUP4701G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS. END OF REPORT LINE CONDUCTED BACK PHOTO