C3K16311631

Surface Pro 3 User Guide With Windows 8.1 Pro Published: June 2014 Version 1.0 © 2014 Microsoft Page i © 2014 Microsoft. All rights reserved. BlueTrack Technology, ClearType, Excel, Hotmail, Internet Explorer, Microsoft, OneNote, Outlook, PowerPoint, OneDrive, Windows, Xbox, and Xbox Live are registered trademarks of Microsoft Corporation. Surface and Skype are trademarks of Microsoft Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. This document is provided “as-is.” Information in this document, including URL and other Internet website references, may change without notice. © 2014 Microsoft Page ii Contents MEET SURFACE PRO 3 .....................................................................................................................................................1 ABOUT THIS GUIDE ................................................................................................................................................................................................ 1 SURFACE PRO 3 FEATURES ................................................................................................................................................................................... 2 SET UP YOUR SURFACE PRO 3 AND SURFACE PEN ....................................................................................................5 SURFACE PEN SETUP ............................................................................................................................................................................................. 5 PLUG IN SURFACE PRO 3 AND TURN IT ON ........................................................................................................................................................ 5 SETUP...................................................................................................................................................................................................................... 6 THE BASICS .......................................................................................................................................................................7 TOUCH, KEYBOARD, MOUSE, AND PEN ............................................................................................................................................................... 7 START SCREEN ....................................................................................................................................................................................................... 7 OPEN APPS ............................................................................................................................................................................................................. 8 TOUCH: SWIPE, TAP, AND BEYOND ..................................................................................................................................................................... 9 CHARMS ............................................................................................................................................................................................................... 11 THE FAMILIAR DESKTOP ...................................................................................................................................................................................... 12 WHAT MOVED OR CHANGED IN WINDOWS 8.1? ........................................................................................................................................... 12 LEARN MORE ABOUT WINDOWS ....................................................................................................................................................................... 13 LOCK SCREEN AND SIGNING IN .......................................................................................................................................................................... 14 GET STARTED ................................................................................................................................................................. 15 GET ONLINE ......................................................................................................................................................................................................... 15 SET UP YOUR EMAIL ............................................................................................................................................................................................. 15 PEOPLE: ADD CONTACTS .................................................................................................................................................................................... 16 SKYPE: ADD CONTACTS ...................................................................................................................................................................................... 16 ONEDRIVE: YOUR PERSONAL CLOUD ................................................................................................................................................................ 16 CUSTOMIZE YOUR START SCREEN ..................................................................................................................................................................... 17 GET TO KNOW SURFACE PRO 3 ................................................................................................................................. 18 POWER STATES: ON, OFF, INSTANTGO, AND HIBERNATION .......................................................................................................................... 18 CHARGING .........................................................................................................................................................................…

Text truncated - open the document above for the full version.

2. English 11. Français 22. Español 2 Surface Cleaning & USage inStrUCtionS Always handle your device with care to maintain its appearance. To clean, wipe the outer surface with a soft, lint-free cloth. This symbol identifies safety and health messages in this Device Guide Warning: read Safety & Health info Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft ® device that you have purchased. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. For an online version of this guide go to: www.surface.com/support Warning: Do not attempt repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Warning: aC adapter Safety Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. To select an appropriate power source for your device: • Use only the power supply unit and AC power cord that came with your device or that you received from an authorized Microsoft retailer. • Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. • Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit. • On devices where the AC prongs may be folded for storage, before plugging the AC adapter into a power outlet, make sure its prongs are fully extended. • On devices where the AC prongs are removable and where the power supply uses a universal adapter, before plugging the AC adapter into a power outlet, make sure the prong assembly is of the proper configuration for the power outlet and fully seated into the adapter. Caution: Cable and cord safety Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. to avoid damaging the power cords and power supply: • Protect the power cords from being walked on. • Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. • Do not jerk, knot, sharply bend, or otherwise abuse the power cords. • Do not expose the power cords to sources of heat. • Keep children and pets away from the power cords. Do not allow them to bite or chew on them. • When disconnecting the power cords, pull on the plug—do not pull on the cord. • If a power cord or power supply becomes damaged in any way, stop using it immediately. • Unplug your device during lightning storms or when unused for long periods of time. • For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it seats fully. 2 Plug the other end of the AC power cord into the wall outlet. 3 Warning: Battery Safety This device contains a built-in battery, improper use of which may result in explosion. Do not heat, open, puncture, mutilate, or dispose of the product in fire. Do not leave the device in direct sunlight for an extended period of time, which could cause melting or battery damage. The battery in this device is not user replaceable and should only be replaced by Microsoft or a Microsoft Authorized Service Provider. See www.surface.com/support for additional details. Warning: Use near Water To reduce the risk of fire or shock, do not use this device near water and do not expose it to rain or moisture. Do not attempt to dry device with a hair dryer or a microwave oven. Warning: Hearing Safety Set the volume loud enough to hear clearly in quiet surroundings, and no louder. Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing. • Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise-canceling headphones can reduce outside noise so that you don’t have to turn up the volume. If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise-canceling headphones, you should be able to hear nearby people speak. Minimize Your time listening to loud Sound The more time you spend exposed to loud sound, the more likely you are to damage your hearing. The louder the sound, the less time it takes to damage hearing. • Minimize your time listening to loud sound. At maximum volume, listening to music on the device with headphones can permanently damage your hearing in 15 minutes. • Even lower volumes can damage hearing if you are exposed for many hours. • All of the sound that you are exposed to during a day adds up. If you are exposed to other loud sound, it takes less time listening at high volumes to cause hearing damage. • To safely use the device with no time limit, keep the volume low enough that you can carry on a conversation with people nearby. Be aware of Hearing loss Symptoms Stop using this device and have your hearing checked if you experience: • Any hearing loss. • You hear ringing in your ears. • Your speech sounds muffled. • Sound seems dull …

Text truncated - open the document above for the full version.

Microsoft Corporation is an equal opportunity employer. May 5, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Letter of Attestation regarding application for certification of FCC ID: C3K1631 TO WHOM IT MAY CONCERN: Per RSS 210 Annex 9 and FCC KDB 443999, this device will not initiate transmissions in the 5600-5650 MHz band. Per FCC KDB 848637, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. The device complies with the requirements for software configuration control as discussed in KDB # 594280. Sincerely, Michael C. Boucher Compliance Engineer Microsoft Corporation

Microsoft Corporation is an equal opportunity employer. May 5, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Agency authorization letter for Microsoft employees To whom it may concern, We, the undersigned, Microsoft® Corporation hereby authorize the following, to act on our behalf, as our agent, in all matters relating to all processes required according to FCC Part 15C for Microsoft® Corporation products (Grantee Code:C3K): Michael Boucher Pam Galvan Albert Huang Bill Huang Joy Alegria Hasnain Syed Tim Calland Brad Sybouts Kitty Tam Eugene Wong Anindita Mitra If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Stephen M. Stegner Compliance Engineer Microsoft Corporation

Microsoft Corporation is an equal opportunity employer. May 5, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality request regarding application for certification of FCC ID: C3K1631 TO WHOM IT MAY CONCERN Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: � Block Diagram � Schematics � Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Michael C. Boucher Compliance Engineer Microsoft Corporation

Microsoft Corporation is an equal opportunity employer. May 5, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Subject: Short-term confidentiality request regarding application for certification of FCC ID: C3K1631 TO WHOM IT MAY CONCERN Pursuant to DA 04-1705 of the Commission’s public notice, we request short-term confidential treatment for the following information until Nov 1, 2014 in order to ensure sensitive business information remains confidential until the actual marketing of the device: • External Photos • Test Setup Photos • User’s Manual • Internal Photos Sincerely, Michael Boucher Compliance Engineer Microsoft Corporation

External Photos for Model 1631 Page 1 of 5 Model 1631 External Photographs Front Back Antenna Locations Antenna Locations External Photos for Model 1631 Page 2 of 5 Bottom Left Side External Photos for Model 1631 Page 3 of 5 Right Side Top External Photos for Model 1631 Page 4 of 5 Left Side with Kickstand Right Side with Kickstand External Photos for Model 1631 Page 5 of 5 Back with Kickstand

Label Content for Model 1631 Label is located on lower back panel. Microsoft Corporation Model: 1631 FCC ID: C3K1631 IC: 3048A­1631

Internal Photos for Model 1631 Page 1 of 14 Model 1631 Internal Photographs Internal Photos for Model 1631 Page 2 of 14 Antenna Locations Fan Motherboard Hard drive Batteries Internal Photos for Model 1631 Page 3 of 14 Display Internal Photos for Model 1631 Page 4 of 14 Antenna Locations Internal Photos for Model 1631 Page 5 of 14 Motherboard Top Side Internal Photos for Model 1631 Page 6 of 14 Motherboard Top Side. Shield cans removed. Internal Photos for Model 1631 Page 7 of 14 Enclosure bottom with Batteries Internal Photos for Model 1631 Page 8 of 14 Motherboard Bottom Side RF Section Internal Photos for Model 1631 Page 9 of 14 Motherboard Bottom Side. Shield cans removed. Internal Photos for Model 1631 Page 10 of 14 RF Section. Shield Can Removed. Wi­Fi/BT chip Internal Photos for Model 1631 Page 11 of 14 Wi­Fi Main Antenna Top Side Wi­Fi Main Antenna Wi­Fi MIMO / BT Antenna Internal Photos for Model 1631 Page 12 of 14 Wi­Fi Main Antenna Bottom Side Internal Photos for Model 1631 Page 13 of 14 Wi-Fi MIMO / BT Antenna Top Side Wi-Fi MIMO / BT Antenna Bottom Side Internal Photos for Model 1631 Page 14 of 14

FCC 47 CFR Parts 1 & 2 Published RF Exposure KDB Procedures IEEE Std 1528-2013 SAR EVALUATION REPORT For Portable Computing Device with Wi-Fi 802.11 a/b/g/n/ac MIMO + Bluetooth Model: 1631 FCC ID: C3K1631 Report Number: 14U17394-S1 Issue Date: 04/30/2014 Prepared for Microsoft Corporation One Microsoft Way Redmond, WA 98052 United States Prepared by UL Verification Services Inc. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 Report No.: 14U17394-S1 Issue Date: 04/30/2014 FCC ID: C3K1631 Page 2 of 46 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 04/13/2014 Initial Issue -- Report No.: 14U17394-S1 Issue Date: 04/30/2014 FCC ID: C3K1631 Page 3 of 46 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ............................................................................................................. 5 2. Test Methodology ........................................................................................................................... 6 3. Facilities and Accreditation ........................................................................................................... 6 4. Calibration and Uncertainty ........................................................................................................... 7 4.1. Measuring Instrument Calibration .............................................................................................. 7 4.2. Measurement Uncertainty .......................................................................................................... 7 5. Measurement System Description and Setup ............................................................................... 8 6. SAR Measurement Procedure ........................................................................................................ 9 6.1. Normal SAR Measurement Procedure ....................................................................................... 9 6.2. Volume Scan Procedures ........................................................................................................ 11 7. Device Under Test ......................................................................................................................... 12 7.1. General Information ................................................................................................................. 12 7.2. Wireless Technologies ............................................................................................................. 12 7.3. Simultaneous Transmission Condition ..................................................................................... 12 7.4. RF Output Power Tolerance .................................................................................................... 13 8. RF Exposure Conditions .............................................................................................................. 19 8.1. Standalone SAR Test Exclusion Considerations ...................................................................... 19 8.1.1. SAR Test Exclusion Calculations for Wi-Fi SISO (1 Tx) Transmit Conditions .................... 19 8.1.2. SAR Test Exclusion Calculations for Wi-Fi MIMO (2 Tx) Transmit Conditions .................. 20 8.2. Required Test Configurations .................................................................................................. 20 8.3. Additional Test Scenarios ........................................................................................................ 21 9. RF Output Power Measurement ................................................................................................... 22 9.1. WiFi (2.4 GHz Band) ................................................................................................................ 22 9.2. WiFi (5 GHz Bands) ................................................................................................................. 24 9.3. Bluetooth ................................................................................................................................. 30 10. Tissue Dielectric Properties ..................................................................................................... 31 10.1. Composition of Ingredients for the Tissue Material Used in the SAR Tests .......................... 32 10.2. Tissue Dielectric Parameter Check Results .......................................................................... 33 11. System Performance Check ..................................................................................................... 35 11.1. System Performance Check Measurement Conditions ......................................................... 35 11.2. Reference SAR Values for System Performance Check....................................................... 35 11.3. System Performance Check Results .................................................................................... 36 Report No.: 14U17394-S1 Issue Date: 04/30/2014 FCC ID: C3K1631 Page 4 of 46 UL Verification Services Inc. FORM NO: CCSUP4031G 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 12. SAR Test Results ...................................................................................................................... 37 12.1. Wi-Fi DTS Band ...................................................…

Text truncated - open the document above for the full version.

Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/3/2014 20140403_SystemPerformanceCheck-D5GHzV2 SN 1003 Frequency: 5200 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5200 MHz; σ = 5.379 S/m; ε r = 48.221; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE4 Sn1357; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3901; ConvF(4.4, 4.4, 4.4); Calibrated: 2/25/2014; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA001BB; Serial: 1163 Body/5.2 GHz, Pin=100mW/Area Scan (61x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Reference Value = 47.950 V/m; Power Drift = 0.19 dB Fast SAR: SAR(1 g) = 7.09 W/kg; SAR(10 g) = 2.01 W/kg Maximum value of SAR (interpolated) = 18.1 W/kg Body/5.2 GHz, Pin=100mW/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 47.950 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 30.6 W/kg SAR(1 g) = 7.75 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 17.9 W/kg 0 dB = 17.9 W/kg = 12.53 dBW/kg Plot No. 2 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/3/2014 20140403_SystemPerformanceCheck-D5GHzV2 SN 1003 Frequency: 5200 MHz; Duty Cycle: 1:1 Body/5.2 GHz, Pin=100mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 11.3 W/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/9/2014 20140409_SystemPerformanceCheck-D2450V2 SN 899 Frequency: 2450 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 2450 MHz; σ = 2.002 S/m; ε r = 52.072; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Averaged Fast SAR: Polynomial fit - Electronics: DAE4 Sn1357; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3901; ConvF(6.97, 6.97, 6.97); Calibrated: 2/25/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Body/Pin=100 mW/Area Scan (71x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Reference Value = 58.478 V/m; Power Drift = -0.05 dB Fast SAR: SAR(1 g) = 5.28 W/kg; SAR(10 g) = 2.27 W/kg Maximum value of SAR (interpolated) = 7.74 W/kg Body/Pin=100 mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.478 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 11.3 W/kg SAR(1 g) = 5.16 W/kg; SAR(10 g) = 2.32 W/kg Maximum value of SAR (measured) = 7.44 W/kg 0 dB = 7.44 W/kg = 8.72 dBW/kg Plot No. 4 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/9/2014 20140409_SystemPerformanceCheck-D2450V2 SN 899 Frequency: 2450 MHz; Duty Cycle: 1:1 Body/Pin=100 mW/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm Maximum value of SAR (measured) = 6.83 W/kg Plot No. 1 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/3/2014 Wi-Fi 2.4 GHz Frequency: 2462 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used (interpolated): f = 2462 MHz; σ = 1.997 S/m; ε r = 50.641; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3901; ConvF(6.97, 6.97, 6.97); Calibrated: 2/25/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Phantom: ELI v5.0 A; Type: QDOVA002AA; Serial: 1180 Bevel/802.11b_ch 11_MIMO/Area Scan (9x26x1): Measurement grid: dx=12mm, dy=12mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.84 W/kg Bevel/802.11b_ch 11_Main/Zoom Scan(7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.785 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.54 W/kg SAR(1 g) = 1.26 W/kg; SAR(10 g) = 0.431 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 2.02 W/kg Bevel/802.11b_ch 11_Aux/Zoom Scan(7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 30.785 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 2.98 W/kg SAR(1 g) = 1.08 W/kg; SAR(10 g) = 0.369 W/kg Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.86 W/kg 0 dB = 1.86 W/kg = 2.70 dBW/kg Main Aux Plot No. 2 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 3/31/2014 Wi-Fi 5.8 GHz Frequency: 5745 MHz; Duty Cycle: 1:1; Room Ambient Temperature: 24.0C; Liquid Temperature: 23.0C Medium parameters used: f = 5745 MHz; σ = 6.11 S/m; ε r = 48.636; ρ = 1000 kg/m 3 DASY5 Configuration: - Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Electronics: DAE4 Sn1357; Calibrated: 2/17/2014 - Probe: EX3DV4 - SN3901; ConvF(3.98, 3.98, 3.98); Calibrated: 2/25/2014; - Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2mm (Mechanical Surface Detection) - Phantom: ELI v5.0 B; Type: QDOVA001BB; Serial: 1163 Bevel/802.11a_ch 149_Aux/Area Scan(9x36x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 1.96 W/kg Bevel/802.11a_ch 149_Aux/Zoom Scan(7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 20.291 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 7.48 W/kg SAR(1 g) = 1.11 W/kg; SAR(10 g) = 0.216 W/kg Maximum value of SAR (measured) = 2.80 W/kg 0 dB = 2.80 W/kg = 4.47 dBW/kg Plot No. 3 Test Laboratory: UL Verification Services Inc. SAR Lab E Date: 4/4/2014 Wi-Fi 5.2 GHz Frequency: 5240 MHz; Duty Cycle: 1:1; Room…

Text truncated - open the document above for the full version.

RADIO TEST REPORT For MODEL NO. 1631 Test Report No. R-TR42-NA_DFS-3 Issue Date: May 16, 2014 FCC 15.407 (DFS) RSS-210 (DFS) Prepared by Microsoft EMC Laboratory 17760 NE 67th Ct, Redmond WA, 98052, U.S.A. 425-421-9799 [email protected] TESTING CERT #3472.01 Test Report#: R-TR42-NA_DFS-3 Issued: 5/16/2014 Page 2 of 34 ©Microsoft EMC Laboratory 1 Record of Revisions Revision Date Section Page(s) Summary of Changes Author/Revised By: 1.0 05/09/2014 All All First Version Jennifer Liu 2.0 05/14/2014 9 18,23,28,33 Added Non-occupancy test data. Jennifer Liu 3.0 05/16/2014 9.3, 9.4 24-33 Added test data for 40MHz with Cisco AIR-AP1252AG-A-K9 Access Point. Jennifer Liu Test Report#: R-TR42-NA_DFS-3 Issued: 5/16/2014 Page 3 of 34 ©Microsoft EMC Laboratory Table of Contents 1 Record of Revisions ............................................................................................................ 2 2 Deviations from Standard ...…

Text truncated - open the document above for the full version.