C3K1695Wireless Keyboard

 Contents Microsoft Product Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Guia do Produto da Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Guide produit Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Guía del producto de Microsoft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 0508 PartNo.X2-6903-05 M X121690305mnl.indb 15/21/2008 3:15:52 PM 2 Microsoft Product Guide Read this guide for important safety and health information that applies to the Microsoft ® device that you have purchased. Warning Failure to properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. Read this guide and keep all printed guides for future reference. For replacement guides, go to www.microsoft.com/hardware or refer to the Customer Support Options section for contact information. This document includes important information about many Microsoft products. Refer to sections that apply to the features of your device: Important Safety Information AC-Powered Devices Battery-Powered Devices Headset Devices Webcam Devices Wireless Devices Keyboard and Mouse Devices Devices with Laser Pointers All Devices Laser and LED Specifications Regulatory Information Radio Frequency Technical Specifications Radio and TV Interference Regulations Disposal of Waste Batteries and Electrical and Electronic Equipment Statement of Compliance with EU Directives Patent Information Customer Support Options This symbol identifies safety and health messages in this Product Guide and other product manuals . Important Safety Information AC-Powered Devices These precautions apply to all products that plug into a standard wall power outlet. Failure to take the following precautions can result in serious injury or death from electric shock or fire or in damage to the device. M X121690305mnl.indb 25/21/2008 3:15:52 PM 3 To select an appropriate power source for your device: ● Use only the power supply unit and AC power cord that came with your device or that you received from an authorized repair center. ● Confirm that your electrical outlet provides the type of power indicated on the power supply unit (in terms of voltage [V] and frequency [Hz]). If you are not sure of the type of power supplied to your home, consult a qualified electrician. ● Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. ● Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle. Confirm that they are rated to handle the total current (in amps [A]) drawn by the device (indicated on the power supply unit) and any other devices that are on the same circuit. To avoid damaging the power cords and power supply: ● Protect the power cords from being walked on. ● Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. ● Do not jerk, knot, sharply bend, or otherwise abuse the power cords. ● Do not expose the power cords to sources of heat. ● Keep children and pets away from the power cords. Do not allow them to bite or chew on them. ● When disconnecting the power cords, pull on the plug — do not pull on the cord. If a power cord or power supply becomes damaged in any way, stop using it immediately. Unplug your device during lightning storms or when unused for long periods of time. For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it stops. 2 Plug the other end of the AC power cord into the wall outlet. Battery-Powered Devices These precautions apply to all products that use rechargeable or disposable batteries. Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: ● Keep batteries out of reach of children. ● Do not heat, open, puncture, mutilate, or dispose of batteries in fire. ● Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries). ● Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns. X121690305mnl.indb 35/21/2008 3:15:52 PM  ● Remove the batteries if they are worn out or before storing your device for an extended period of time. ● Always remove old, weak, or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Disposal Regulations. ● If a battery leaks, remove all batteries, taking care to keep the leaked fluid from touching your skin or clothes. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s recommendations for cleanup. Disposable (non-rechargeable) batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the correct size and type (alkaline, zinc-carbon, or zinc-chloride) of batteries. Rechargeable batteries only: ● Caution Risk of explosion if battery is replaced by an incorrect type. Use and replace only with the same type and rating as the batteries provided. ● Charge only with the recharger provided with the product. Lithium button cell batteries only: ● Perchlorate Material — special handling may apply. See: www.dtsc.ca.gov/hazardouswaste/perchlorate Headset Devices Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. To prevent damage…

Text truncated - open the document above for the full version.

Federal Communications Commission Authorization and Evaluation Division Date: March 20, 2015 FCC ID: C3K1695 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ------------------------------------------------------- Bill Huang MICROSOFT CORPORATION Compliance Engineer, EMC and Safety Compliance Phone: +86(755) 86118714 Email: [email protected]

Federal Communications Commission Authorization and Evaluation Division Date: March 12, 2015 FCC ID: C3K1695 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we request short-term confidential treatment for the following information until Aug 30, 2015 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Test Setup Photos User’s Manual Internal Photo Thank you! Sincerely yours, Bill Huang MICROSOFT CORPORATION Compliance Engineer, EMC and Safety Compliance Phone: +86(755) 86118714 Email: [email protected]

Power of Attorney Date: March 12, 2015 To whom it may concern: We, the undersigned, Microsoft Corporation hereby authorize Amanda Wu /Senior Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu /Senior Specialist of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. 1.Model: 1695 (FCC ID: C3K1695) If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, Bill Huang MICROSOFT CORPORATION Compliance Engineer, EMC and Safety Compliance Phone: +86(755) 86118714 Email: [email protected]

Microsoft Corporation is an equal opportunity employer. Subject: Authorized signatories January 7, 2009 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 A G E N C Y A U T H O R I Z A T I O N L E T T E R To whom it may concern, We, the undersigned, Microsoft® Corporation hereby authorize the following, to act on our behalf, as our agent, in all matters relating to all processes required according to FCC Part 15C for Microsoft® Corporation products (Grantee Code:C3K): Michael Boucher San Chen Ted Eckert Pam Galvan Albert Huang Bill Huang Daniel Lamanuzzi Joel Lachance Brad Sybouts Kitty Tam Eugene Wong If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Stephen M. Stegner E &D Compliance Manager, EMC and Safety Microsoft Corporation TEL: (425) 706-2697 FAX: (425) 936-7329 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11

Report No.: SA150225D10 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA150225D10 FCC ID: C3K1695 Test Model: 1695 Received Date: Feb. 2, 2015 Test Date: Feb. 2 ~ Mar. 3, 2015 Issued Date: Mar. 9, 2015 Applicant: MICROSOFT CORPORATION Address: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA150225D10 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 Evaluation Result............................................................................................................................. 5 3 Sar Test Exclusion Thresholds ....................................................................................................... 6 4 Conclusion ....................................................................................................................................... 6 Report No.: SA150225D10 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA150225D10 Original release. Mar. 9, 2015 Report No.: SA150225D10 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Wireless Keyboard Brand: Microsoft ® Test Model: 1695 Sample Status: Engineering sample Applicant: MICROSOFT CORPORATION Test Date: Feb. 2 ~ Mar. 3, 2015 Standards: FCC Part 2 (Section 2.1093) KDB 447498 D03 IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Mar. 9, 2015 Jessica Cheng / Senior Specialist Approved by : , Date: Mar. 9, 2015 Rex Lai / Assistant Manager Report No.: SA150225D10 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where ÿ f(GHz) is the RF channel transmit frequency in GHz . ÿ Power and distance are rounded to th e nearest mW and mm before calculation. ÿ The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA150225D10 Page No. 6 / 6 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds Maximum measured transmitter power: Frequency (GHz) Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result 2.402 ~ 2.480 1.4 5 0.…

Text truncated - open the document above for the full version.

Report No.: RF150225D10 Page No. 1 / 55 Report Format Version: 6.1.1 FCC Test Report Report No.: RF150225D10 FCC ID: C3K1695 Test Model: 1695 Received Date: Feb. 7, 2015 Test Date: Feb. 7 ~ Mar. 3, 2015 Issued Date: Mar. 9, 2015 Applicant: MICROSOFT CORPORATION Address: ONE MICROSOFT WAY REDMOND, WA 98052-6399, U.S.A Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150225D10 Page No. 2 / 55 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................. 10 3.4 Description of Support Units ..........................................................................................................11 3.4.1 Configuration of System under Test .............................................................................................. 12 3.5 General Description of Applied Standards ..................................................................................... 13 4 Test Types and Results.................................................................................................................. 14 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 14 4.1.2 Test Instruments ........................................................................................................................... 15 4.1.3 Test Procedures ........................................................................................................................... 16 4.1.4 Deviation from Test Standard ........................................................................................................ 16 4.1.5 Test Set Up................................................................................................................................... 17 4.1.6 EUT Operating Conditions ............................................................................................................ 17 4.1.7 Test Results .................................................................................................................................. 18 4.2 Conducted Emission Measurement .............................................................................................. 42 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 42 4.2.2 Test Instruments ........................................................................................................................... 42 4.2.3 Test Procedures ........................................................................................................................... 43 4.2.4 Deviation from Test Standard ........................................................................................................ 43 4.2.5 TEST SETUP ............................................................................................................................... 43 4.2.6 EUT Operating Conditions .................…

Text truncated - open the document above for the full version.

1 of 3 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 of 3 RADIATED EMISSION TEST MODE A 3 of 3 MODE B