C3K1697Wireless Input Device

1 XBOX ONE ACCESSORY IMPORTANT INFORMATION This symbol identifi es safety and health messages in this product guide and other product manuals. Read this guide for important safety and health information for the product that you have purchased. WARNING: Failure to properly set up, use, and care for this product can increase the risk of serious injury, death, property damage, or damage to the product or related accessories. Read this guide and keep all printed guides for future reference. For replacement guides, go to xbox.com/xboxone/useinstructions. WARNING: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock, fi re or other hazard, or damage to your Xbox One accessory. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty and render the Xbox One accessory ineligible for authorized repair. Modifying your accessory can result in a permanent ban from Xbox Live. USING YOUR ACCESSORY Make Sure Children Play Safely Make sure children using any Xbox One accessory together with the Xbox One console play safely and within their limits, and make sure that they understand proper use of the system. Refer to the Xbox One console guide for more information. WARNING: Choking hazard This device may contain small parts that may be a choking hazard to children under 3. Keep small parts away from children. CAUTION: Cables Arrange any cables and cords so that people and pets are unlikely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. CAUTION: Hearing Safety Extended exposure to high sound volumes when using a headset may result in temporary or permanent hearing loss. To reduce the risk of hearing loss, set the volume loud enough to hear clearly in quiet surroundings, and no louder. • Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing. • Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise- canceling headphones can reduce outside noise so that you don’t have to turn up the volume. • If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise canceling headphones, you should be able to hear nearby people speak. Minimize your time listening to loud sound The more time that you spend exposed to high sound volumes, the more likely you are to damage your hearing. The louder the sound, the less time that is required to damage hearing. • Minimize your time listening to loud sound. At maximum volume, listening to music on the device with headphones can permanently damage your hearing in 15 minutes. X18-91804-01 X189180401MNL.indd 15/30/13 3:02 PM 2 • Even lower volumes can damage hearing if you are exposed to it for many hours. • All of the sound that you are exposed to during a day adds up. If you are exposed to other loud sound, it takes less time listening at high volumes to cause hearing damage. • To safely use the device without a time limit, keep the volume low enough that you can carry on a conversation with people nearby. ELECTRICAL SAFETY WARNING: As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock, fire, or damage to Xbox One accessories and console. • Use only an approved charging cable. • Do not allow a wireless device or charging cable to become wet. • Unplug the charging cable during lightning storms or when unused for long periods. • To prevent damage, avoid sitting or stepping on a wireless device, its cable, or the cable plug or connector. Go to xbox.com/xboxone/electricalsafety for more information. BATTERY POWERED DEVICES WARNING: Battery Safety The following precautions apply to all products that use disposable or rechargeable batteries including lithium polymer. Improper battery use may result in series injury, death, property damage, or damage to the product or related accessories as a result of battery fluid leakage, fire, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: • Keep batteries out of reach of children. • Remove the batteries if they are worn out or before storing your device for an extended period. Always remove old, weak, or worn-out batteries immediately and recycle or dispose of them in accordance with local and national disposal regulations. • If a battery leaks, remove all batteries by reversing the installation steps provided for this product, being careful to keep the leaked fluid from touching your skin or clothes. If fluid from the battery contacts skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a dry cloth, or follow the battery manufacturer’s recommendations for cleanup. • Do not open, puncture, mutilate, heat, apply direct heat to, or dispose of batteries in fire. • Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries). • Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns. • Do not carry or place batteries together with necklaces, hairpins or other metal objects. • Do not leave a battery-powered device in direct sunlight for an extended period, such as on the dash of car during the summer. • Do not immerse batteries in water or allow them to become wet. • Do not connect batteries directly to wall outlets or car cigarette-ligh…

Text truncated - open the document above for the full version.

Quick Start Guide (QSG) The quick start guide explains accessory setup and features using illustrations only (no text). Only initial setup and basic features are covered by this guide. Additional detail and troubleshooting steps are available to the user through at URL included in this guide. www.xbox.com/xboxone/gettingstarted

Microsoft Corporation is an equal opportunity employer. January 20, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Agency authorization letter for Microsoft employees To whom it may concern, We, the undersigned, Microsoft® Corporation hereby authorize the following, to act on our behalf, as our agent, in all matters relating to all processes required according to FCC Part 15C for Microsoft® Corporation products (Grantee Code:C3K): Michael Boucher Pam Galvan Albert Huang Bill Huang Joy Alegria Hasnain Syed Tim Calland Brad Sybouts Kitty Tam Eugene Wong Anindita Mitra If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Stephen M. Stegner Compliance Engineer Microsoft Corporation

April 10, 2015 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Pamela Galvan Microsoft Compliance Engineer [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.

Model 1697 Photos

FCC 47 CFR § 2.1093 INDUSTRY CANADA RSS 102 ISSUE 5 RF EXPOSURE REPORT FOR WIRELESS INPUT DEVICE MODEL NUMBER: 1697 FCC ID: C3K1697 IC ID: 3048A-1697 REPORT NUMBER: 15U20293-E6 Revision E ISSUE DATE: May 14, 2015 Prepared for MICROSOFT CORPORATION ONE MICROSOFT WAY REDMOND, WA 98052, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 15U20293-E6C DATE: May 14, 2015 FCC ID: C3K1697 IC: 3048A-1697 Page 2 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 4/15/15 Initial Issue F. de Anda A 4/27/15 Updated 5 GHz ave power F. de Anda B 5/12/2015 Removed MPE calculations and updated SAR exclusion calculations Dave Weaver C 5/12/2015 Updated FCC and IC SAR Exclusion Calculations with 13mm separation distance F. de Anda D 5/13/2015 Updated FCC and IC SAR Exclusion Calculations with Tune-Up power numbers F. de Anda E 5/14/15 Updated EUT name F. de Anda REPORT NO: 15U20293-E6C DATE: May 14, 2015 FCC ID: C3K1697 IC: 3048A-1697 Page 3 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS .......................................... 6 5.1. FCC ............................................................................................................................ 6 5.2. INDUSTRY CANADA ................................................................................................. 7 REPORT NO: 15U20293-E6C DATE: May 14, 2015 FCC ID: C3K1697 IC: 3048A-1697 Page 4 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: MICROSOFT CORPORATION ONE MICROSOFT WAY REDMOND, WA 98052, U.S.A. EUT DESCRIPTION: WIRELESS INPUT DEVICE MODEL: 1697 SERIAL NUMBER: NA DATE TESTED: NA APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR § 2.1093 Published RF exposure KDB procedures Exempt from SAR testing INDUSTRY CANADA RSS 102 ISSUE 5 Exempt from SAR testing UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: FRANCISCO DE ANDA PROJECT LEAD UL Verification Services Inc. REPORT NO: 15U20293-E6C DATE: May 14, 2015 FCC ID: C3K1697 IC: 3048A-1697 Page 5 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC KDB 447498 or RSS-102 issue 5 for 10g extremity SAR. 3. REFERENCES Maximum declared output power and antenna gain is provided by the applicant. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 Benicia Street, Fremont, California, USA. UL Verification Services Inc. is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://ts.nist.gov/standards/scopes/2000650.htm. REPORT NO: 15U20293-E6C DATE: May 14, 2015 FCC ID: C3K1697 IC: 3048A-1697 Page 6 of 8 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of . UL Verification Services Inc. 5. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS 5.1. FCC SAR test exclusion in accordance with KDB 447498. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)]·[√f(GHz)] ≤ 3.0, for 1-g SAR and ≤ 7…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT FOR WIRELESS INPUT DEVICE MODEL NUMBER: 1697 FCC ID: C3K1697 REPORT NUMBER: 14U19258-E2 Revision C ISSUE DATE: MAY 14, 2015 Prepared for MICROSOFT CORPORATION ONE MICROSOFT WAY REDMOND, WA 98052, U.S.A. Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 2 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 1/27/15 Initial Issue F. de Anda A 4/25/15 Update antenna gains. Output power KDB reference updated, Output power tables updated to correspond to updated KDB reference. Plots removed from sections 8.2.3 and 8.3.3. Duty cycle CF changed to 0 for sections 8.2.4 and 8.3.4. Added test procedure to section 9. J. Gomez B 4/30/15 Removed duty cycle correction factors for sections 8.2.4, 8.2.5, 8.3.4, 8.3.5, 8.4.4, 8.4.5, Updated average power section 8.2.2 C. Susa C 5/14/15 Updated EUT name F. de Anda REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 3 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 7 5. EQUIPMENT UNDER TEST ............................................................................................... 8 5.1. DESCRIPTION OF EUT .............................................................................................. 8 5.2. MAXIMUM OUTPUT POWER...................................................................................... 8 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 8 5.4. SOFTWARE AND FIRMWARE .................................................................................... 8 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 8 5.6. DESCRIPTION OF TEST SETUP ................................................................................ 9 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................12 7. MEASUREMENT METHODS ............................................................................................13 8. ANTENNA PORT TEST RESULTS ...................................................................................14 8.1. ON TIME AND DUTY CYCLE .....................................................................................14 8.2. 802.11g MODE IN THE 2.4 GHz BAND ......................................................................16 8.2.1. 6 dB BANDWIDTH ...............................................................................................16 8.2.2. AVERAGE POWER .............................................................................................19 8.2.3. OUTPUT POWER ...............................................................................................20 8.2.4. POWER SPECTRAL DENSITY ...........................................................................22 8.2.5. OUT-OF-BAND EMISSIONS ...............................................................................25 8.3. 802.11n HT20 MODE IN THE 2.4 GHz BAND ............................................................29 8.3.1. 6 dB BANDWIDTH ...............................................................................................29 8.3.2. AVERAGE POWER .............................................................................................32 8.3.3. OUTPUT POWER ...............................................................................................33 8.3.4. POWER SPECTRAL DENSITY ...........................................................................35 8.3.5. OUT-OF-BAND EMISSIONS ...............................................................................38 9. RADIATED TEST RESULTS .............................................................................................42 9.1. LIMITS AND PROCEDURE ........................................................................................42 9.2. TRANSMITTER ABOVE 1 GHz ..................................................................................43 9.2.1. TX ABOVE 1 GHz 802.11g MODE IN THE 2.4 GHz BAND .................................43 9.2.2. TX ABOVE 1 GHz 802.11n HT20 MODE IN THE 2.4 GHz BAND ........................53 REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 4 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 9.3. WORST-CASE BELOW 1 GHz ...................................................................................63 9.4. WORST-CASE ABOVE 18 …

Text truncated - open the document above for the full version.

REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 67 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 10. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 68 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) REPORT NO: 14U9258-E2C DATE: MAY 14, 2015 FCC ID:C3K1697 Page 69 of 69 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) END OF REPORT RADIATED FRONT PHOTO (ABOVE 1 GHz) RADIATED BACK PHOTO (ABOVE 1 GHz)