C3K1770Wireless Input Device

Quick Start Guide (QSG) The quick start guide explains accessory setup and features using illustrations only (no text). Only initial setup and basic features are covered by this guide. Additional detail and troubleshooting steps are available to the user through at URL included in this guide. www.xbox.com/xboxone/gettingstarted

1 XBOX ONE ACCESSORY IMPORTANT INFORMATION This symbol identifi es safety and health messages in this product guide and other product manuals. Read this guide for important safety and health information for the product that you have purchased. WARNING: Failure to properly set up, use, and care for this product can increase the risk of serious injury, death, property damage, or damage to the product or related accessories. Read this guide and keep all printed guides for future reference. For replacement guides, go to xbox.com/xboxone/useinstructions. WARNING: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock, fi re or other hazard, or damage to your Xbox One accessory. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty and render the Xbox One accessory ineligible for authorized repair. Modifying your accessory can result in a permanent ban from Xbox Live. USING YOUR ACCESSORY Make Sure Children Play Safely Make sure children using any Xbox One accessory together with the Xbox One console play safely and within their limits, and make sure that they understand proper use of the system. Refer to the Xbox One console guide for more information. WARNING: Choking hazard This device may contain small parts that may be a choking hazard to children under 3. Keep small parts away from children. CAUTION: Cables Arrange any cables and cords so that people and pets are unlikely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cords. CAUTION: Hearing Safety Extended exposure to high sound volumes when using a headset may result in temporary or permanent hearing loss. To reduce the risk of hearing loss, set the volume loud enough to hear clearly in quiet surroundings, and no louder. • Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing. • Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise- canceling headphones can reduce outside noise so that you don’t have to turn up the volume. • If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise canceling headphones, you should be able to hear nearby people speak. Minimize your time listening to loud sound The more time that you spend exposed to high sound volumes, the more likely you are to damage your hearing. The louder the sound, the less time that is required to damage hearing. • Minimize your time listening to loud sound. At maximum volume, listening to music on the device with headphones can permanently damage your hearing in 15 minutes. X18-91804-01 X189180401MNL.indd 15/30/13 3:02 PM 2 • Even lower volumes can damage hearing if you are exposed to it for many hours. • All of the sound that you are exposed to during a day adds up. If you are exposed to other loud sound, it takes less time listening at high volumes to cause hearing damage. • To safely use the device without a time limit, keep the volume low enough that you can carry on a conversation with people nearby. ELECTRICAL SAFETY WARNING: As with many other electrical devices, failure to take the following precautions can result in serious injury or death from electric shock, fire, or damage to Xbox One accessories and console. • Use only an approved charging cable. • Do not allow a wireless device or charging cable to become wet. • Unplug the charging cable during lightning storms or when unused for long periods. • To prevent damage, avoid sitting or stepping on a wireless device, its cable, or the cable plug or connector. Go to xbox.com/xboxone/electricalsafety for more information. BATTERY POWERED DEVICES WARNING: Battery Safety The following precautions apply to all products that use disposable or rechargeable batteries including lithium polymer. Improper battery use may result in series injury, death, property damage, or damage to the product or related accessories as a result of battery fluid leakage, fire, overheating, or explosion. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury: • Keep batteries out of reach of children. • Remove the batteries if they are worn out or before storing your device for an extended period. Always remove old, weak, or worn-out batteries immediately and recycle or dispose of them in accordance with local and national disposal regulations. • If a battery leaks, remove all batteries by reversing the installation steps provided for this product, being careful to keep the leaked fluid from touching your skin or clothes. If fluid from the battery contacts skin or clothes, flush skin with water immediately. Before inserting new batteries, thoroughly clean the battery compartment with a dry cloth, or follow the battery manufacturer’s recommendations for cleanup. • Do not open, puncture, mutilate, heat, apply direct heat to, or dispose of batteries in fire. • Do not mix new and old batteries or batteries of different types (for example, carbon-zinc and alkaline batteries). • Do not allow metal objects to touch the battery terminals on the device; they can become hot and cause burns. • Do not carry or place batteries together with necklaces, hairpins or other metal objects. • Do not leave a battery-powered device in direct sunlight for an extended period, such as on the dash of car during the summer. • Do not immerse batteries in water or allow them to become wet. • Do not connect batteries directly to wall outlets or car cigarette-ligh…

Text truncated - open the document above for the full version.

Microsoft Corporation is an equal opportunity employer Subject: Authorized signatories May 18, 2015 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 A G E N C Y A U T H O R I Z A T I O N L E T T E R F O R M I C R O S O F T E M P L O Y E E S To whom it may concern, We, the undersigned, Microsoft® Corporation hereby authorize the following, to act on our behalf, as our agent, in all matters relating to all processes required according to FCC Part 15 for Microsoft® Corporation products (Grantee Code:C3K): Hasnain Syed Kitty Tam Anindita Mitra David Johnson Michael Boucher Pamela Galvan Sajay Jose Jennifer Liu Joseph Dizon Elaine Reeves Jojo Malliyakal Wei Sun Zachary Gray Daniel Salinas Shoaib Khan Johnny Deng Robert Towne Chip Schulman Andy Jia Lang Shen Eugene Wong Bill Huang Albert Huang Tim Calland Joy Alegria Ellis Lee Angus McGill If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Stephen M. Stegner Compliance Engineer Microsoft Corporation

November 2, 2015 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Pamela Galvan Microsoft Compliance Engineer [email protected] REMARK: 1. This authorization letter will be sent along with your application when filing with UL Verification Services Inc. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database and Industry Canada contact information.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: C3K1770 Grant Date: November 13, 2015 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Antenna Specification Tune-Up Procedure KDB 594280 D02 v01r02 U-NII Device SW Security Statement Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days from November 13, 2015 External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Pamela Galvan Compliance Engineer Microsoft November 2, 2015

LABEL PLACEMENT ON BATTERY WELL Label located in the battery well on the back side of EUT Bottom Back Top Back

Microsoft Corporation is an equal opportunity employer. Model: 1770 FCC ID: C3K1770 IC ID: 3048A-1770 EUT Internal View- Front Side Microsoft Corporation is an equal opportunity employer. EUT Internal View- Back Side Microsoft Corporation is an equal opportunity employer. Main Board- Top View Main Board- Back View. Antenna Microsoft Corporation is an equal opportunity employer. Antenna Photographs

Report V2.0 RF Exposure Evaluation Report For MODEL NO. 1770 FCC ID: C3K1770 IC ID: 3048A-1770 Test Report No. R-TR209-FCCIC-MPE-3 Issue Date: 13 November 2015 FCC CFR47 Part 2.1093 Industry Canada RSS-102: Issue 5 Prepared by Microsoft EMC Laboratory 17760 NE 67th Ct, Redmond WA, 98052, U.S.A. 425-421-9799 [email protected] TESTING CERT #3472.01 Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 2 of 12 Microsoft EMC Laboratory 1 Record of Revisions Revision Date Section Page(s)Summaryof Changes Author/Revised By: 1.0 11/02/2015 All All Version 1.0 Daniel Salinas 2.0 11/05/2015 6.2 6.3 10 11 Corrected KDB Version typo. Updated calculation with output power including tolerance. Daniel Salinas 3.0 11/13/2015 1 4 Typo correction to Test Report # Daniel Salinas Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 3 of 12 Microsoft EMC Laboratory Table of Contents 1 Record of Revisions ............................................................................................................... 2 2 Product Description ............................................................................................................... 5 3 Deviations from Standards .................................................................................................... 5 4 Facilities and Accreditations .................................................................................................. 6 4.1 Test Facility .................................................................................................................... 6 4.2 Accreditations ................................................................................................................. 6 4.3 Test Configurations ........................................................................................................ 6 5 Average Conducted Output Power Measurements ............................................................... 7 5.1 Test Method .................................................................................................................... 7 5.2 Test Equipment List ........................................................................................................ 8 5.3 Test Results .................................................................................................................... 8 6 SAR Test Exclusion ............................................................................................................. 10 6.1 SAR Test Exclusion Criteria ......................................................................................... 10 6.2 FCC .............................................................................................................................. 10 FCC SAR Test Exclusion Evaluation .................................................................... 10 6.3 IC .................................................................................................................................. 11 IC SAR Test Exclusion Evaluation ........................................................................ 11 Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 4 of 12 Microsoft EMC Laboratory Test Report Attestation Microsoft Corporation Model: 1770 FCC ID: C3K 1770 IC ID: 3048A-1770 Applicable Standards Specification Test Result FCC CFR47 Part 2.1093 Industry Canada RSS-102 Issue 5 Complies Microsoft EMC Laboratory attests that the product model identified in this report has been tested to and meets the requirements identified in the above standards. The test results in this report solely pertains to the specific sample tested, under the conditions and operating modes as provided by the customer. This report shall not be used to claim product certification, approval, or endorsement by A2LA or any agency of any Government. Reproduction, duplication or publication of extracts from this test report requires prior written approval of Microsoft EMC Laboratory. This report replaces the previously issued Test Report # R-TR209-FCCIC-MPE-2 issued by Microsoft EMC Labs on 11/05/2015. Written By: Daniel Salinas Reviewed/ Issued By: Sajay Jose Radio Test Lead EMC/RF Compliance Lab Manager Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 5 of 12 Microsoft EMC Laboratory 2 Product Description Company Name: Microsoft Corporation Address: One Microsoft Way City, State, Zip: Redmond, WA 98052-6399 Customer Contact: Pamela Galvan Functional Description of the EUT: Wireless Input Device Model: 1770 FCC ID: C3K1770 IC ID: 3048A-1770 Radio Description: IEEE WLAN 802.11a/g/n with 20MHz Signal Bandwidths (SISO only) Frequency Range of Operation: 2.4- 2.4835 GHz 5170 – 5250MHz, 5250 – 5330MHz, 5490 – 5710MHz, and 5735 – 5835MHz Max Antenna Gain: -0.55 dBi (2.4GHz) 1.95 dBi (5 GHz) EUT Classification: DTS device Equipment Design State: Production Equipment Condition: Good RF Exposure Conditions: Extremity Exposure, Body Exposure 3 Deviations from Standards None. Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 6 of 12 Microsoft EMC Laboratory 4 Facilities and Accreditations 4.1 Test Facility All test facilities used to collect the test data are located at Microsoft EMC Laboratory, 17760 NE 67 th Ct, Redmond WA, 98052, USA 4.2 Accreditations The lab is established and follows procedures as outlined in IEC/ISO 17025 and A2LA accreditation requirements. A2LA Accredited Testing Certificate Number: 3472.01 4.3 Test Configurations Test Software Details: Test software “Radio Test 2 (ART-GUI) created by the chipset manufacturer was used to program the EUT to transmit continuously. The maximum output power declared by the manufacturer is 8 dBm. Report#: R-TR209-FCCIC-MPE-3 Issued: 11/13/2015 Page 7 of 12 Microsoft EMC Laboratory 5 Average Conducted Output Power Measurements 5.1 Test Method Antenna port conducted measurements were performed on a bench-top setup consisting of a spectrum analyzer, power meter (as necessary), splitters/combiners (as necessary), attenuators, and pre-characterized …

Text truncated - open the document above for the full version.

Rev 2.0 RADIO TEST REPORT For MODEL NO. 1770 FCC ID: C3K1770 IC ID: 3048A-1770 Test Report No. R-TR209-FCCIC-WLAN-2 Issue Date: 06 November 2015 FCC CFR47 Part 15 Subpart C Industry Canada RSS-247 Issue 1 Prepared by Microsoft EMC Laboratory 17760 NE 67th Ct, Redmond WA, 98052, U.S.A. 425-421-9799 [email protected] TESTING CERT #3472.01 FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 2 of 65 Microsoft EMC Laboratory 1 Record of Revisions Revision Date Section Page(s)Summaryof Changes Author/Revised By: 1.0 11/2/2015 All All Version 1.0 Daniel Salinas 1.0 11/6/2015 5 8 Corrected typo on serial numbers of test samples. Daniel Salinas FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 3 of 65 Microsoft EMC Laboratory Table of Contents 1 Record of Revisions ............................................................................................................... 2 2 Deviations from Standards .................................................................................................... 7 3 Facilities and Accreditations .................................................................................................. 7 3.1 Test Facility .................................................................................................................... 7 3.2 Accreditations ................................................................................................................. 7 3.3 Test Equipment .............................................................................................................. 7 4 Measurement Uncertainty ...................................................................................................... 7 5 Product Description ............................................................................................................... 8 5.1 Test Configurations ........................................................................................................ 8 5.2 Environmental Conditions ............................................................................................... 8 5.3 Antenna Requirements ................................................................................................... 8 5.4 Equipment Modifications ................................................................................................ 8 5.5 Dates of Testing ............................................................................................................. 9 6 Test Results Summary .......................................................................................................... 9 7 Test Equipment List ............................................................................................................. 10 8 Test Site Description ............................................................................................................ 12 8.1 Radiated Emissions Test Site ....................................................................................... 12 Radiated Measurements in 30 - 1000 MHz ........................................................... 12 Radiated Measurements above 1GHz .................................................................. 12 8.2 Antenna port conducted measurements ....................................................................... 12 8.3 Test Setup Diagrams .................................................................................................... 12 9 Test Results- Conducted ..................................................................................................... 15 9.1 Duty Cycle .................................................................................................................... 15 Test Requirement: ................................................................................................. 15 Test Method: ......................................................................................................... 15 Limits: .................................................................................................................... 15 Test Results: ......................................................................................................... 15 9.2 DTS Bandwidth ............................................................................................................. 17 Test Requirement: ................................................................................................. 17 Test Method: ......................................................................................................... 17 Limits: .................................................................................................................... 17 Test Results: ......................................................................................................... 17 Test Data: .............................................................................................................. 18 FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 4 of 65 Microsoft EMC Laboratory 9.3 99% Bandwidth ............................................................................................................. 21 Test Requirement: ................................................................................................. 21 Test Method: ......................................................................................................... 21 Limit: ...................................................................................................................... 21 Test Results: ......................................................................................................... 21 Test Data: .............................................................................................................. 22 9.4 Output Power ...........................................................................................…

Text truncated - open the document above for the full version.

FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 34 of 65 Microsoft EMC Laboratory 9.6 Conducted Spurious Emissions Test Requirement: FCC CFR 47 Rule Part 15.247 (d) Industry Canada RSS-247 [5.5] Test Method: Measurements are performed according to the procedure defined in KDB 558074- Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 V03R03 and ANSI C63.10 2013. Spectrum Analyzer settings: Identification of Reference Level: RBW= 100 kHz VBW ≥ 3 x RBW Trace Mode= Peak Detector (Max Hold) Sweep time= Auto Span ≥ 1.5 times the DTS bandwidth Peak Marker function to determine the max PSD level. Conducted Spurious Emissions: RBW= 1 MHz VBW≥ 3 x RBW Trace Mode= Peak Detector (Max Hold) Sweep Points = 30,000 Sweep time= Auto Span= 30 MHz- 12GHz; 12 GHz – 25 GHz Limits: All spurious emissions shall be at least 20 dB below the carrier. Test Result: Pass. FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 35 of 65 Microsoft EMC Laboratory Test Data: Plot 9-27 Reference Level 802.11g - Ch.1 (2412 MHz) Plot 9-28 Conducted Spurious Emissions 30 - 1000 MHz 802.11g - Ch.1 (2412 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 36 of 65 Microsoft EMC Laboratory Plot 9-29 Conducted Spurious Emissions 12-25 GHz 802.11g - Ch.1 (2412 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 37 of 65 Microsoft EMC Laboratory Plot 9-30 Reference Level 802.11g - Ch.6 (2437 MHz) Plot 9-31 Conducted Spurious Emissions 30 - 1000 MHz 802.11g - Ch.6 (2437 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 38 of 65 Microsoft EMC Laboratory Plot 9-32 Conducted Spurious Emissions 12-25 GHz 802.11g - Ch.6 (2437 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 39 of 65 Microsoft EMC Laboratory Plot 9-33 Reference Level 802.11g - Ch.11 (2462 MHz) Plot 9-34 Conducted Spurious Emissions 30 - 1000 MHz 802.11g - Ch.11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 40 of 65 Microsoft EMC Laboratory Plot 9-35 Conducted Spurious Emissions 12-25 GHz 802.11g - Ch.11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 41 of 65 Microsoft EMC Laboratory Plot 9-36 Reference Level 802.11n - Ch.1 (2412 MHz) Plot 9-37 Conducted Spurious Emissions 30 - 1000 MHz 802.11n - Ch.1 (2412 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 42 of 65 Microsoft EMC Laboratory Plot 9-38 Conducted Spurious Emissions 12-25 GHz 802.11n - Ch.1 (2412 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 43 of 65 Microsoft EMC Laboratory Plot 9-39 Reference Level 802.11n - Ch.6 (2437 MHz) Plot 9-40 Conducted Spurious Emissions 30 - 1000 MHz 802.11n - Ch.6 (2437 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 44 of 65 Microsoft EMC Laboratory Plot 9-41 Conducted Spurious Emissions 12-25 GHz 802.11n - Ch.6 (2437 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 45 of 65 Microsoft EMC Laboratory Plot 9-42 Reference Level 802.11n - Ch.11 (2462 MHz) Plot 9-43 Conducted Spurious Emissions 30 - 1000 MHz 802.11n - Ch.11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 46 of 65 Microsoft EMC Laboratory Plot 9-44 Conducted Spurious Emissions 12-25 GHz 802.11n - Ch.11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 47 of 65 Microsoft EMC Laboratory 9.7 Conducted Band Edge Emissions Test Requirement: FCC CFR 47 Rule Part 15.247 (d) Industry Canada RSS-247 Issue 1 [5.5] Test Method: Measurements are performed according to the procedure defined in KDB 558074- Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247 V03R03 and ANSI C63.10 (2013) American National Standard of Procedure for Compliance Testing of Unlicensed Wireless Devices. Spectrum Analyzer settings: Band Edge Emissions: RBW= 100 kHz VBW ≥ 3 x RBW Detector= Peak Trace = Max Hold Sweep time= Auto Limits: All spurious emissions shall be at least 20 dB below the carrier. Test Result: Pass. FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 48 of 65 Microsoft EMC Laboratory Test Data: Plot 9-45 Conducted Band Edge 802.11g - Ch. 1 (2412 MHz) Plot 9-46vConducted Band Edge 802.11g - Ch. 11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 49 of 65 Microsoft EMC Laboratory Plot 9-47Conducted Band Edge 802.11n - Ch. 1 (2412 MHz) Plot 9-48 Conducted Band Edge 802.11n - Ch. 11 (2462 MHz) FCC ID: C3K1770 IC ID: 3048A-1770 Report#: R-TR209-FCCIC-WLAN-2 Issued: Nov 6, 2015 Page 50 of 65 Microsoft EMC Laboratory 9.8 Radiated Spurious and Band Edge Emissions Test Requirement: FCC CFR 47 Rule Part 15.247 (d) Industry Canada RSS-247 [5.5] and RSS GEN [8.9] Test …

Text truncated - open the document above for the full version.