C3K1942Media Dongle

2. English US 11. Français FR 21. Español US


  2 CLEANING & USAGE INSTRUCTIONS Always handle your device with care to maintain its appearance. To clean, wipe the outer surface with a soft, lint-free cloth.              WARNING: Read Safety & Health Info Read this guide for important safety and health information and the terms of the Limited Warranty that apply to the Microsoft ® device that you have purchased. Keep all printed guides for future reference. Failure to follow instructions and properly set up, use, and care for this product can increase the risk of serious injury or death, or damage to the device or devices. For an online version of this guide go to: www. /support Warning: Do Not Attempt Repairs Do not attempt to take apart, open, service, or modify the product, accessories, or power supply. Doing so could present the risk of electric shock or other hazard. Any evidence of any attempt to open and/or modify this device, including any peeling, puncturing, or removal of any of the labels, will void the Limited Warranty. Warning: AC Adapter Safety Failure to take the following precautions can result in serious injury or death from electric shock                        • Use only the power supply unit and AC power cord that came with your device or that you received from an authorized Microsoft retailer. • Do not use non-standard power sources, such as generators or inverters, even if the voltage and frequency appear acceptable. Only use AC power provided by a standard wall outlet. • Do not overload your wall outlet, extension cord, power strip, or other electrical receptacle.                  !  "            !               • On devices where the AC prongs may be folded for storage, before plugging the AC adapter into a power outlet, make sure its prongs are fully extended. • On devices where the AC prongs are removable and where the power supply uses a universal adapter, before plugging the AC adapter into a power outlet, make sure the prong assembly is               fully seated into the adapter. Caution: Cable and cord safety Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area. Do not allow children to play with cables and cor ds. To avoid damaging the power cords and power supply: • Protect the power cords from being walked on. • Protect cords from being pinched or sharply bent, particularly where they connect to the power outlet, the power supply unit, and the device. • Do not jerk, knot, sharply bend, or otherwise abuse the power cords. • Do not expose the power cords to sources of heat. • Keep children and pets away from the power cords. Do not allow them to bite or chew on them. • When disconnecting the power cords, pull on the plug—do not pull on the cord. • If a power cord or power supply becomes damaged in any way, stop using it immediately. • Unplug your device during lightning storms or when unused for long periods of time. • For devices with an AC power cord that connects to the power supply, always connect the power cord according to the following instructions: 1 Plug the AC power cord into the power supply until it seats fully. 2 Plug the other end of the AC power cord into the wall outlet. 3 Warning: Battery Safety Information This device contains a built-in battery, improper use of which may result in explosion. Do not   #  #   #   #        $        direct sunlight for an extended period of time, which could cause melting or battery damage. The battery in this device is not user replaceable and should only be replaced by Microsoft or a Microsoft Authorized Service Provider. See www. /support for additional details. • Do not disassemble or open, crush, bend or deform, puncture or shred • Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or %        &# %   # %     ' • (   "          "  &         )      * &     +  0    )444 5678 9   &  "          ;   # %#  ; #     ' • Promptly dispose of used batteries in accordance with local regulations • Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. • )  "         # %     ' •      "     )      #    "   90+<)=          90+<)=   Warning: Use Near Water     ;    ;#              %    or moisture. Do not attempt to dry device with a hair dryer or a microwave oven. Warning: Hearing Safety Set the volume loud enough to hear clearly in quiet surroundings, and no louder. Do not increase the volume after you start listening. Your ears can adapt over time so that high volume sounds normal, but the high volume may still damage your hearing. • Do not increase the volume to block out outside noise. The combination of outside noise and sound from your headphones can damage your hearing. Sealed or noise-canceling headphones can reduce outside noise so that you don’t have to turn up the volume. If you can’t understand someone nearby speaking normally, turn down the volume. Sound that drowns out normal speech can damage your hearing. Even with sealed or noise-canceling headphones, you should be able to hear nearby people speak. Minimize Your Time Listening to Loud Sound The more time you spend expo…

Text truncated - open the document above for the full version.

For Windows 10, install the Microsoft 4K Wireless Display Adapter app from the Microsoft Store for adapter customization, updates, and additional settings. Visit aka.ms/DisplayAdapterApp to install. For best performance, keep your connected device within 20 ft. (6.1 m.) of the TV or monitor. Range may vary depending on your device. Additional performance improvements may be available using the settings in the Display Adapter app. The adapter must always be plugged into both the HDMI and USB ports. The adapter is powered through the USB port. Set up 1. Connect your Microsoft 4K Wireless Display Adapter to an HDMI port and a powered USB port on your TV or monitor. 2. On the TV or monitor, set the input source to the HDMI port you chose. 3. On your Windows 10 PC, press Windows Logo key + K. Select the Wireless Display Adapter name from the list of available connections. On other Miracast ® -enabled devices, look for Miracast or Cast in Settings and follow your device’s instructions. Questions? Learn more. Des questions? En savoir plus. ¿Tienes preguntas? Más información. Perguntas? Saiba mais. aka.ms/DisplayAdapterSupport support.microsoft.com ©2020 Microsoft M1123405-001 DIELINE YMC MS Devices LIGHT Gray GMS-147 MS Devices MEDIUM Gray GMS-148 MS Devices DARK Gray GMS-149 1-173797.indd 118.05.20 02:28 Installation 1. Connectez votre adaptateur d’affichage sans fil Microsoft 4K à un port HDMI et à un port USB alimenté sur votre téléviseur ou votre écran. 2. Sur le téléviseur ou l’écran, réglez la source d’entrée sur le port HDMI que vous avez choisi. 3. Sur votre PC Windows 10, appuyez sur la touche de logo Windows + K. Sélectionnez le nom de l’adaptateur d’affichage sans fil dans la liste des connexions disponibles. Sur d’autres appareils compatibles avec Miracast ® , recherchez Miracast ou Projeter dans les Paramètres et suivez les instructions de votre appareil. Pour Windows 10, installez l’application Affichage sans fil Microsoft 4K à partir du Microsoft Store pour la personnalisation de l’adaptateur, les mises à jour et les paramètres supplémentaires. Visitez aka.ms/DisplayAdapterApp pour l’installer. Pour bénéficier de performances optimales, placez votre appareil connecté à moins de 6,1 mètres (20 pi) de votre téléviseur ou de votre écran. La portée peut varier en fonction de votre appareil. Des améliorations de performances supplémentaires peuvent être disponibles à l’aide des paramètres de l’application Affichage sans fil. L’adaptateur doit toujours être branché simultanément aux ports HDMI et USB. L’adaptateur est alimentée par le port USB. Configuración 1. Conecta el Adaptador inalámbrico de pantalla 4K de Microsoft a un puerto HDMI y a un puerto USB con alimentación de tu televisor o monitor. 2. En el televisor o monitor, configura la fuente de entrada en el puerto HDMI que hayas elegido. 3. En tu PC Windows 10, presiona la tecla del logotipo de Windows + K. Selecciona el nombre del Adaptador inalámbrico de pantalla de la lista de conexiones disponibles. En otros dispositivos compatibles con Miracast ® , busca Miracast o Cast en Configuración y sigue las instrucciones que indica el dispositivo. En Windows 10, para personalizar el adaptador, obtener actualizaciones y conocer opciones de configuración adicionales, instala la app Adaptador inalámbrico de pantalla 4K de Microsoft Store. Visita aka.ms/DisplayAdapterApp instalar la app. Para obtener un rendimiento óptimo, mantén el dispositivo conectado dentro de una distancia de 6,1 metros (20 pies) del televisor o monitor. El alcance puede variar según el dispositivo. Es posible que se obtengan mejoras de rendimiento adicionales mediante las opciones de configuración de la app Adaptador de pantalla. El adaptador debe estar siempre conectado a los puertos HDMI y USB. El adaptador se alimenta a través del puerto USB. Configuração 1. Conecte o Microsoft 4K Wireless Display Adapter a uma porta HDMI e a uma porta USB alimentada na TV ou no monitor. 2. Na TV ou no monitor, defina a fonte de entrada como a porta HDMI de sua escolha. 3. Em seu PC com Windows 10 PC, pressione tecla do Windows + K. Selecione o nome do Wireless Display Adapter na lista de conexões disponíveis. Em outros dispositivos preparados para Miracast ® , procure por Miracast ou Cast em Configurações e siga as instruções do dispositivo. No Windows 10, instale o aplicativo Microsoft 4K Wireless Display Adapter pela Microsoft Store para obter personalização, atualizações e configurações adicionais do adaptador. Acesse aka.ms/DisplayAdapterApp para instalar. Para obter o melhor desempenho, mantenha o dispositivo conectado a uma distância de aproximadamente 6.1 m. da TV ou monitor. O alcance pode variar dependendo do dispositivo. Mais melhorias de desempenho podem estar disponíveis usando as configurações do aplicativo do Display Adapter. O adaptador sempre deve ser conectado às portas HDMI e USB. O adaptador é ligado pela porta USB. 1-173797.indd 218.05.20 02:28

DFS client device channel plan and software operational declaration Date: 2020-08-31 We, MICROSOFT CORPORATION, declare that the device, FCC ID: C3K1942 Model Name: 1942, does not have Ad Hoc on “non-US frequencies” and/or on“ DFS frequencies“. Also, the client software and associated drivers will not initiate any transmission on DFS frequencies without initiation by a master. This includes restriction on transmissions for beacons and support for ad-hoc peer-to-peer modes. Below is the channel / frequency plan for the device 5G band 1 5G band 2 5G band 3 5G band 4 Also, on DFS channels, the WLAN driver in the device operates under the control of an AP at all times, except when in ad-hoc mode on US non-DFS channels. The device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is protected by a special signature and CRC checksum. Signature and CRC checksum will be calculated and verified before CH 1 2 3 4 5 6 7 8 9 10 11 Frequency (MHz) 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 Scan Type Active Active Active Active Active Active Active Active Active Active Active CH 12 13 Frequency (MHz) 2467 2474 Scan Type Active Active CH 36 38 40 44 46 48 Frequency (MHz) 5180 5190 5200 5220 5230 5240 Scan Type Active Active Active Active Active Active CH 52 54 56 60 62 64 Frequency (MHz) 5260 5270 5280 5300 5310 5320 Scan Type Passive Passive Passive Passive Passive Passive CH 100 102 104 108 110 112 116 118 120 Frequency (MHz) 5500 5510 5520 5540 5550 5560 5580 5590 5600 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 124 126 128 132 134 136 140 142 144 Frequency (MHz) 5620 5630 5640 5660 5670 5680 5700 5710 5720 Scan Type Passive Passive Passive Passive Passive Passive Passive Passive Passive CH 149 151 153 157 159 161 165 Frequency (MHz) 5745 5755 5765 5785 5795 5805 5825 Scan Type Active Active Active Active Active Active Active firmware upgrade. Unauthorized modification to firmware will lead to the failure of verification and thus firmware upgrade will not be allowed. Sincerely yours, Sincerely yours, ----------------------------------- Albert Huang EMC/Safety Engineer MICROSOFT CORPORATION Tel: (86-755)8611 8676 Fax: (86-755)2655 1121 Email: [email protected]

Date: 2020-08-31 FCC ID: C3K1942 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Albert Huang EMC/Safety Engineer MICROSOFT CORPORATION Tel: (86-755)8611 8676 Fax: (86-755)2655 1121 Email: [email protected]

Date: 2020-08-31 FCC ID: C3K1942 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------- Albert Huang EMC/Safety Engineer MICROSOFT CORPORATION Tel: (86-755)8611 8676 Fax: (86-755)2655 1121 Email: [email protected]

Date: 2020-08-31 FCC ID: C3K1942 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: MICROSOFT CORPORATION hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on MICROSOFT CORPORATION’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Albert Huang EMC/Safety Engineer MICROSOFT CORPORATION Tel: (86-755)8611 8676 Fax: (86-755)2655 1121 Email: [email protected]

Microsoft Corporation is an equal opportunity employer. Subject: Authorized signatories February 26, 2019 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 AGENCY AUTHORIZATION LETTER FOR MICROSOFT EMPLOYEES To whom it may concern, I, the undersigned hereby authorize the following, to act on my behalf, as the agent(s), in all matters relating to all processes for FCC equipment authorization for Microsoft® Corporation (Grantee Code: C3K). Hasnain Syed Anindita Mitra David Johnson Michael Boucher Kyle Chen Chaitrali Limaye Wei Sun Zachary Gray Daniel Salinas Vishwas Varadanahalli Narayan Albert Huang Mengni Yin Choon Sian Ooi Nisha Nandakumar If you have any questions regarding the authorization, please don’t hesitate to contact me. Sincerely, Hasnain Syed Sr. Director, EMC/SI & RF Compliance Microsoft Corporation Email: [email protected]

Reference No.: 200616D06-ExtPho Page 1 / 3 CONSTRUCTION PHOTOS OF EUT Reference No.: 200616D06-ExtPho Page 2 / 3 Reference No.: 200616D06-ExtPho Page 3 / 3

LABEL LOCATION label can’t be removed. Label

Reference No.: 200616D06-IntPho Page 1 / 5 CONSTRUCTION PHOTOS OF EUT Reference No.: 200616D06-IntPho Page 2 / 5 Reference No.: 200616D06-IntPho Page 3 / 5 Reference No.: 200616D06-IntPho Page 4 / 5 Reference No.: 200616D06-IntPho Page 5 / 5

Report No.: SA200616D06 R1 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 RF Exposure Report Report No.: SA200616D06 R1 FCC ID: C3K1942 Test Model: 1942 Received Date: Apr. 13, 2020 Test Date: Apr. 30 to Sep. 1, 2020 Issued Date: Sep. 2, 2020 Applicant: MICROSOFT CORPORATION Address: ONE MICROSOFT WAY REDMOND, WA 98052-6399 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14 th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertaint y of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200616D06 R1 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result Of Maximum Conducted Power ............................................................................ 6 Report No.: SA200616D06 R1 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 Release Control Record Issue No. Description Date Issued SA200616D06 Original release. Jul. 10, 2020 SA200616D06 R1 Change the wireless module to 2T2R and re-test. Sep. 2, 2020 Report No.: SA200616D06 R1 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 1 Certificate of Conformity Product: Media Dongle Brand: MICROSOFT Test Model: 1942 Sample Status: Engineering sample Applicant: MICROSOFT CORPORATION Test Date: Apr. 30 to Sep. 1, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Sep. 2, 2020 Annie Chang / Senior Specialist Approved by : , Date:Sep. 2, 2020 Rex Lai / Associate Technical Manager Report No.: SA200616D06 R1 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200616D06 R1 Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 200413D02 Cancels and replaces the report No.: SA200616D06 dated Jul. 10, 2020 2.4 Calculation Result Of Maximum Conducted Power Frequency Band (MHz) Max AV Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2402-2480 3.69 2.17 20 0.0008 1 2412-2472 21.24 5.18 20 0.0872 1 5180-5240 22.10 6.30 20 0.1376 1 5260-5320 22.15 6.30 20 0.1392 …

Text truncated - open the document above for the full version.

Report No.: RF200616D06 R1 Page No. 1 / 23 Report Format Version: 6.1.2 Reference No.: 200413D02 Cancels and replaces the report No.: RF200616D06 dated Jul. 10, 2020 DFS Test Report Report No.: RF200616D06 R1 FCC ID: C3K1942 Test Model: 1942 Received Date: Apr. 13, 2020 Test Date: Aug. 20, 2020 Issued Date: Aug. 20, 2020 Applicant: MICROSOFT CORPORATION Address: ONE MICROSOFT WAY REDMOND, WA 98052-6399 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention , the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200616D06 R1 Page No. 2 / 23 Report Format Version: 6.1.2 Reference No.: 200413D02 Cancels and replaces the report No.: RF200616D06 dated Jul. 10, 2020 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 EUT Information .................................................................................................................................... 5 2.1 Operating Frequency Bands and Mode of EUT .................................................................................. 5 2.2 EUT Software and Firmware Version .................................................................................................. 5 2.3 Description Of Available Antennas to The EUT .................................................................................. 5 2.4 EUT Maximum Conducted Power ....................................................................................................... 6 2.5 EUT Maximum E.I.R.P. Power ............................................................................................................ 7 2.6 Transmit Power Control (TPc) ............................................................................................................. 8 2.7 Statement of Manufacturer .................................................................................................................. 8 3. U-NII DFS Rule Requirements ............................................................................................................. 9 3.1 Working Modes and Required Test Items ........................................................................................... 9 3.2 Test Limits And Radar Signal Parameters ........................................................................................ 10 4. Test & Support Equipment List ......................................................................................................... 13 4.1 Test Instruments ................................................................................................................................ 13 4.2 Description of Support Units ............................................................................................................. 13 5. Test Procedure .................................................................................................................................... 14 5.1 DFS Measurement System ............................................................................................................... 14 5.2 Calibration of DFS Detection Threshold Level .................................................................................. 15 5.3 Deviation From Test Standard ........................................................................................................... 15 5.4 Radiated Test Setup Configuration ................................................................................................... 16 5.4.1 Client Without Radar Detection Mode ............................................................................................... 16 6. Test Results ......................................................................................................................................... 16 6.1 Summary of Test Results .................................................................................................................. 16 6.2 Test Results ....................................................................................................................................... 17 6.2.1 Test Mode: Device Operating In Client Without Radar Detection Mode. .......................................... 17 6.2.2 Channel Closing Transmission And Channel Move Time ................................................................. 18 6.2.3 Non-Occupancy Period ..................…

Text truncated - open the document above for the full version.

Report No.: RF200616D06-3 R1 Page No. 1 / 104 Report Format Version:6.1.2 Reference No.: 200413D02 Cancels and replaces the report No.: RF200616D06-3 dated Jul. 10, 2020 FCC Test Report (WLAN) Report No.: RF200616D06-3 R1 FCC ID: C3K1942 Test Model: 1942 Received Date: Apr. 13, 2020 Test Date: Aug. 7 to 13, 2020 Issued Date: Aug. 20, 2020 Applicant: MICROSOFT CORPORATION Address: ONE MICROSOFT WAY REDMOND, WA 98052-6399 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14 th Ling, Chia Pau V…

Text truncated - open the document above for the full version.