C3K2093Dual-band wireless accessory radio

Model 2093 Module Integration Instructions Module Setup: Please prepare “Windows 7 OS” Notebook Step1. Insert Type B to PC USB & Adapter，Device Manager show Picture，and press Mouse Right Key update，When install finish： Before After Setp2.Executexxx\\customer_package_UIv2.06_DLLv4.09_E2-20190402_WinDriverV.0. 0.2.5_FWv.42a1045_VIDPIDCorrected\ QATool_Dbg.exe for Start QA Tool： ==================backup====================== If driver shows exclamation mark, follow the steps to update Step1.Check Hardware identification code Step2.Open the safety information Step3.Key in the Hardware identification code you got from step1 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual v01 rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15.247 & Part 15 Subpart E. 2.3 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 2.4 Limited module procedures This module is limited to specific Microsoft Host, authenticated and operated by non-alterable secure program code contained and controlled by the Host as described in the application exhibit. 2.5 Trace antenna designs Not applicable. 2.6 RF exposure considerations This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules. 2.7 Antennas The following antennas have been certified for use with this module; antennas of the same type with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. 2.8 Label and compliance information The final end product must be labeled in a visible area with the following: “Contains FCC ID: Antenna type: PCB Connector: None C3K2093”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. 2.9 Information on test modes and additional testing requirements This transmitter is tested in a standalone mobile RF exposure condition and any co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 2.10 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the use…

Text truncated - open the document above for the full version.

This product is supplied AS-IS with no warranty. WARNING: Failure to properly set up, use, and care for the device can increase the risk of serious injury, death, property damage, or damage to the product related accessories. WARNING: Failure to properly set up, use, and care for the device can increase the risk of serious injury, death, property damage, or damage to the product related accessories. Some people may experience a seizure when exposed to flashing lights or patterns in video games. Go to https://support.microsoft.com/help/4023454/safety-information for important safety and health information. For Customers in the United States and Canada Supplier’s Declaration of Conformity Models: 2089, 1914 Responsible party: Microsoft Corporation, One Microsoft Way, Redmond, WA 98052, USA. Email: [email protected] This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules, Innovation, Science and Economic Development Canada (ISED) license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Any changes or modifications to this device not expressly approved by Microsoft could void the user’s authority to operate the device. Radio and TV interference regulations Microsoft hardware device(s) can radiate radio frequency (RF) energy. If not installed and used in strict accordance with the instructions given in the printed documentation and/or onscreen help files, the device may cause harmful interference with other radio- communications devices (for example AM/FM radios, televisions, baby monitors, cordless phones, etc.). There is, however, no guarantee that RF interference will not occur in a particular installation. To determine if your hardware device is causing interference to other radio-communications devices, turn off and unplug the device from any external power source. If the interference stops, it was probably caused by the device. If this hardware device does cause interference, try the following measures to correct it: • Relocate the antenna of the other radio-communications device (for example AM/FM Radios, televisions, baby monitors, cordless phones, etc.) until the interference stops. • Move the hardware device farther away from the radio or TV, or move it to one side or the other of the radio or TV. • Plug the device into a different power outlet so that the hardware device and radio or TV are on different circuits controlled by different circuit breakers or fuses. • If necessary, ask your device dealer or an experienced radio-TV technician for more suggestions. For more information about interference issues, go to the FCC Web site at: www.fcc.gov/cgb/consumerfacts/interference.html. You can also call the FCC at 1-888-CALL FCC to request Interference and Telephone Interference fact sheets. CAN ICES-3 (B)/NMB-3(B) Exposure to radio frequency (RF) energy Models 2089, 1914: This device contains radio transmitters and has been designed, manufactured and tested to meet the Federal Communications Commission (FCC), Innovation, Science and Economic Development Canada (ISED), and European requirements for RF exposure and Specific Absorption Rate. Product Specific Absorption Rate (SAR) information is available at sar.microsoft.com Additional information about RF safety can be found on the links below: FCC website at www.fcc.gov/general/radio-frequency-safety-0 ISED website at www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html Model 2089: This equipment should be installed and operated at a minimum of 20 cm from your body. K M1148463-008_FLY.indd 117/08/2021 12:24 Ce produit est fourni TEL QUEL, sans aucune garantie. ATTENTION : Le fait de ne pas configurer, utiliser et entretenir correctement l’appareil peut augmenter le risque de blessures graves, de mort, de dommages matériels ou de dommages aux accessoires associés au produit. Certaines personnes peuvent faire une crise d’épilepsie lorsqu’elles sont exposées à de la lumière clignotante ou à des images répétées dans les jeux vidéo. Accédez à la page h ttps://support.microsoft.com/help/4023454/safety-information pour obtenir des i nformations importantes sur la sécurité et l a santé. Déclaration de conformité du fournisseur pour les clients aux États-Unis et au Canada Modèles : 2089, 1914 Partie responsable : Microsoft Corporation One, Microsoft Way, Redmond, WA 98052 États-Unis Courriel : [email protected] Cet appareil électronique de Classe B est conforme à la Section 15 des règles de la FCC (Federal Communications Commission) aux États-Unis et aux normes radioélectriques pour les appareils exempts de licences d’Innovation, Sciences et Développement économique Canada (ISDE). Le fonctionnement est soumis aux conditions suivantes : (1) cet appareil ne peut pas causer d’interférences, et (2) cet appareil doit accepter toute interférence reçue, notamment celles pouvant entraîner un dysfonctionnement. Remarque : Toute modification sur cet appareil n’étant pas expressément approuvée par Microsoft pourrait annuler le droit de l’utilisateur à se servir de cet appareil. Règlements sur les interférences radio et télévision Les appareils Microsoft peuvent émettre de l’énergie de radiofréquence (RF). S’il n’est pas installé et utilisé confor mément aux instructions données dans la documentation imprimée ou les fichiers d’aide à l’écran, l’appareil peut provoquer des interférences nuisibles avec d’autres appareils de radiocommunication (par exemple les radios AM/FM, les téléviseurs, les moniteurs pour bébé, les téléphones sans fil, etc.). Il est toutefois impossible de garantir qu’aucune interférence ne se produira lors d’une installation particulière. Pour déterminer si votre appareil cause des interférences avec d’autres appareils de radiocommunication, mettez-le hors tension et débranchez-le de tou…

Text truncated - open the document above for the full version.

Date: 2/9/2024 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: C3K2093 1.Microsof t Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2.Microsof t Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Name: Chaitrali Limaye Title: Sr. Compliance Engineer, Company: Microsoft Corporation

Date: January 25, 2024 FederalCommunicationsCommissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: C3K To whom it may concern: Microsoft Corporation (“the applicant”)as required by section §2.911(d)(7), will also serve as the agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after thegranteehas terminatedall marketing andimportationortheconclusion ofanyCommission- related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Company Name:MicrosoftCorporation Contact Person: Hasnain Syed FCC FRN: 0006275291 CompanyUSAddress:OneMicrosoftWay,RedmondWA98052 Email: [email protected] Sincerely, Name: Hasnain Syed Title/Company: Sr. Director EMC/SI/RF Compliance, Microsoft Corporation

FCC ID: C3K2093 Modular Approval Request Letter 02/21/2024 Dear Application Examiner, Microsoft Corporation Model 2093, FCC ID: C3K2093 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB 996369 have been met and shown on the following statements. 1.“The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2.“The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs to ensure compliance with Part 15 requirements under conditions of excessive data rates or over-modulation. Please see the Schematics exhibit submitted in this application. 3.“ The modular transmitter must have its own power supply regulation. The EUT has its own power supply regulation to ensure compliance with Part 15 requirements regardless of the quality or level of external DC supplying the module from the host unit. The technical report exhibit submitted in this application contains AC power line conducted emissions data taken with the EUT powered from a linear power supply that contains no EMC suppression components. 4.“The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5.“ The modular transmitter must be tested in a stand-alone configuration.” This module is limited to specific Microsoft Host, authenticated and operated by non-alterable secure program code contained and controlled by the Host as described in the application exhibit. 6.“The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. The integration manual has instructions for the OEM on how to label the end product. FCC ID: C3K2093 7.“The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8.“The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Chaitrali Limaye Sr. Compliance Engineer Microsoft Corporation

Microsoft Corporation is an equal opportunity employer. 2/9/2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. All acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a)Comply with the relevant provisions of the certification program; b)Make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c)Make claims regarding certification only in respect of the scope for which certification has been granted; d)Not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e)Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f)Use certification only to indicate that products are certified as being in conformity with specified standards; g)Endeavor to ensure that no certificate nor report nor any part thereof is used in a misleading manner; h)Ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i)Keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j)Take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k)Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Chaitrali Limaye Sr. Compliance Engineer, Microsoft Corporation. Microsoft Corporation is an equal opportunity employer.

2/9/2024 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality for FCC ID: C3K2093 To Whom It May Concern: Pursuant to the provisions of the Commission’s rules 47 CFR sections 0.457(d) and 0.459, we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. •Block Diagram •Schematics •Operational Description and associated KDB Inquiry Details The above-mentioned documents contain detailed system and equipment descriptions that are considered as proprietary information in the operation of the equipment. Public disclosure of the above documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04- 1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the commission to grant short-term confidentiality on the following attachments until 8/26/2024. Microsoft Corporation is an equal opportunity employer. Microsoft Corporation is an equal opportunity employer. •External Photos •Test Setup Photos •User’s Manual •Internal Photos It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and the information will be available for public review once the grant of equipment authorization is issued. Sincerely, Chaitrali Limaye Sr. RF Compliance Engineer Microsoft Corporation

Reference No.: BARR-WTW-P23100181_EXT Page 1/4 CONSTRUCTION PHOTOS OF EUT Reference No.: BARR-WTW-P23100181_EXT Page 2/4 Reference No.: BARR-WTW-P23100181_EXT Page 3/4 Reference No.: BARR-WTW-P23100181_EXT Page 4/4

Model 2093 – Label Location Model 2093 Microsoft Corporation FCC ID: C3K2093 IC: 3048A-2093 PCB Label is permanently affixed to the device

Reference No.: BARR-WTW-P23100181_INT Page 1/2 CONSTRUCTION PHOTOS OF EUT Reference No.: BARR-WTW-P23100181_INT Page 2/2

Report No.: MFBARR-WTW-P23100181 Page No. 1 / 10Report Format Version: 7.1.0 RF EXPOSURE REPORT CERTIFICATE OF CONFORMITY FCC Rule Part: FCC Part 2 (Section 2.1091) Report No.: MFBARR-WTW-P23100181 FCC ID: C3K2093 Product: Dual-band wireless accessory radio Brand: Microsoft Model No.: 2093 Received Date: 2023/9/28 Test Date: 2024/1/15 Issued Date: 2024/2/16 Applicant: Microsoft Corporation Address: One Microsoft Way, Redmond, Washington 98052-6399, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kewi Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 Approved by: , Date:2024/2/16 Jeremy Lin / Project Engineer This test report consists of 10 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Polly Chien / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBARR-WTW-P23100181 Page No. 2 / 10Report Format Version: 7.1.0 Table of Contents 1 Release Control Record ............................................................................................................................................ 3 2 Certificate .................................................................................................................................................................... 4 3 Applicable RF Exposure Limit .................................................................................................................................. 5 4 Test Results ................................................................................................................................................................ 8 5 Conclusion .................................................................................................................................................................. 9 6 Information of the Testing Laboratories ................................................................................................................ 10 Report No.: MFBARR-WTW-P23100181 Page No. 3 / 10Report Format Version: 7.1.0 1 Release Control Record Issue No. Description Date Issued MFBARR-WTW-P23100181 Original release. 2024/2/16 Report No.: MFBARR-WTW-P23100181 Page No. 4 / 10Report Format Version: 7.1.0 2 Certificate Product: Dual-band wireless accessory radio Brand: Microsoft Test Model: 2093 Sample Status: Engineering sample Applicant: Microsoft Corporation Test Date: 2024/1/15 FCC Rule Part: FCC Part 2 (Section 2.1091) Standard: KDB 447498 D04 Interim General RF Exposure Guidance v01 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Report No.: MFBARR-WTW-P23100181 Page No. 5 / 10Report Format Version: 7.1.0 3 Applicable RF Exposure Limit § 1.1310 Radiofrequency radiation exposure limits. (a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) of this part within the frequency range of 100 kHz to 6 GHz (inclusive). (b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupat…

Text truncated - open the document above for the full version.

Report No.: RFBARR-WTW-P23100181-1Page No. 1 / 66Report Format Version: 7.1.0 TEST REPORT CERTIFICATE OF CONFORMITY Standard: 47 CFR FCC Part 15, Subpart E (Section 15.407) Report No.: RFBARR-WTW-P23100181-1 FCC ID: C3K2093 Product: Dual-band wireless accessory radio Brand: Microsoft Model No.: 2093 Received Date: 2023/9/28 Test Date: 2023/12/4 ~ 2024/1/7 Issued Date: 2024/2/16 Applicant: Microsoft Corporation Address: One Microsoft Way, Redmond, Washington 98052-6399, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kewi Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Desi gnation Number: 788550 / TW0003 Approved by: , Date:2024/2/16 Jeremy Lin / Project Engineer This test report consists of 66 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Prepared by : Polly Chien / Specialist This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us…

Text truncated - open the document above for the full version.