DO4NS20EAS RF System

Checkpoint Systems, Inc 101 Wolf Drive, Thorofare, New Jersey 08086,USA Date: 2026/7/6 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: DO4NS20 FRN: 0004326823 US Agent – Attestation Statement / Part 2.911(d)(7) Checkpoint Systems, Inc certifies that as of 2026/7/6, we have designated Checkpoint Systems, Inc to accept service of process on our behalf for FCC ID:DO4NS20. Checkpoint Systems, Inc, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. Checkpoint Systems, Inc accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Checkpoint Systems, Inc for FCC ID: DO4NS20. Designated Agent Information: Company Name: Checkpoint Systems, Inc FRN: 0004326823 Address: 101 Wolf Drive, Thorofare, New Jersey 08086,USA Contact Person: Nimesh Shah Phone: (856) 384-2347 Email: [email protected] Sincerely, Company: Checkpoint Systems, Inc Company Representative: Nimesh shah Signature:

checkpointz POWEROFATTORNEY DATE:2026/7/31 To: FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad,Columbia, MD21046 We,CheckpointSystems,Inc.,herebyauthorizeEurofinsTATechnology (Shanghai)Co.,Ltd./BruceZhangonourbehalf,toapplytoFCConour equipmentforFCCID:DO4NS20.AnyandallactscarriedoutbyTA Technology(Shanghai)Co.,Ltd./BruceZhangonourbehalfshallhave thesameeffectasactsofourown. Sincerely, Signature: Printname:NimeshShah Company:CheckpointSystems,Inc.

NS20 Label Location Label size：50mm x 100mm Label Location

PEDESTAL NS20 REV00 No user serviceable parts. Refer to owner's manual regarding installation. S/N:1004028000E1736001 22JUN26 MADE IN CHINA FCC ID：DO4NS20 Contains FCC ID: 2BC6T-ZERO3W V5MACM1252U-Z2 VVX808-04XX IC ID：3356B-NS20 Contain IC ID: 35584-D2E16H2W15 10531A-80804XX 7710A-ACM1252UZ2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Prepared by: Wei Fangying Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF Exposure Evaluation Report Applicant Checkpoint Systems, Inc. FCC ID DO4NS20 Product EAS RF System Brand Checkpoint Model NEO V3.0 REMOTE ELECTRONICS CONTROLLER NS20 Report No. EFTA26050097-IE-06-M1V1 Issue Date August 22, 2026 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 §1.1310, §2.1091 and KDB 447498 D01 General RF Exposure Guidance v06. The test results show that the equipment tested can demonstrate the compliance with the requirements as documented in this report. RF Exposure Evaluation Report Report No.: EFTA26050097-IE-06-M1V1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 2 of 12 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Version Revision Description Issue Date Rev.0 Initial issue of report. July 29, 2026 Rev.1 Updated information. August 22, 2026 Note: This revised report (Report No.: EFTA26050097-IE-06-M1V1) supersedes and replaces the previously issued report (Report No.: EFTA26050097-IE-06-M1). Please discard or destroy the previously issued report and dispose of it accordingly. RF Exposure Evaluation Report Report No.: EFTA26050097-IE-06-M1V1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 3 of 12 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ................................................................................................................................. 4 1.1 Notes of the Test Report ............................................................................................................ 4 1.2 Test Facility ................................................................................................................................ 4 1.3 Testing Location......................................................................................................................... 4 2 Description of Equipment Under Test ............................................................................................... 5 3 Evaluation Standard .......................................................................................................................... 7 4 Max Tune up and EIRP ..................................................................................................................... 8 5 MPE Limit .......................................................................................................................................... 9 6 RF Exposure Evaluation Result for EAS RF Transmitters ............................................................. 10 7 Simultaneous transmission Evaluation Result ................................................................................ 11 ANNEX A: The EUT Appearance ........................................................................................................... 12 RF Exposure Evaluation Report Report No.: EFTA26050097-IE-06-M1V1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 4 of 12 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform measurements. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] RF Exposure Evaluation Report Report No.: EFTA26050097-IE-06-M1V1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-01-014S Page 5 of 12 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment Under Test Client Information Applicant Checkpoint Systems, Inc. Applicant address 101 Wolf Drive, Thorofare, New Jersey 08086, USA Manufacturer Checkpoint Systems, Inc. Manufacturer address 101 Wolf Drive, Thorofare, New Jersey 08086, USA General Technologies EUT Description Model NEO V3.0 REMOTE ELECTRONICS CONTROLLER NS20 Lab internal SN 260529-28-011 Hardware Version REV00 Software Version v5.14r/3.2.3 Antenna Type External Antenna Tested Frequency Range(s) 7.825, 7.975, 8.125, 8.275, 8.425, 8.575 MHz Bluetooth: 2402~2480 MHz Wi-Fi 2.4G: 2412~2462 MHz Wi-Fi 5GHz (U-NII-1): 5150 ~ 5250 MHz Wi-Fi 5GHz (U-NII-3): 5725~5850 MHz Support Units Wi-Fi dongle Manufacturer: LM Tech Model: LM808 NFC dongle Manufacturer: Checkpoint Model: BKT MOUNT LED & SNDR NS45 EUT Accessory ALARM BOX Manufacturer: Checkpoint Model: NEO V3.0 ALARM BOX ALARM TOWER Manufacturer: Checkpoint Model: NS45 ALARM TOWER Sound & Light Kit Manufacturer: Checkpoint Model: BKT MOUNT LED & SNDR NS45 Auxiliary Test Equipment Adapter Manufacturer: Checkpoint Model: DVPYSUS50W240210 Output: 2…

Text truncated - open the document above for the full version.

Prepared by: Liu Wei Approved by: Xu Kai Eurofins TA Technology (Shanghai) Co., Ltd. Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 RF TEST REPORT Applicant Checkpoint Systems, Inc. FCC ID DO4NS20 Product EAS RF System Brand Checkpoint Model NEO V3.0 REMOTE ELECTRONICS CONTROLLER PEDESTAL NS20 Report No. EFTA26050097-IE-05-R1 Issue Date July 30, 2026 Eurofins TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC CFR47 Part 15C (2025). The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. RF Test Report Report No.: EFTA26050097-IE-05-R1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-04-009R Page 2 of 32 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 4 1.1 Notes of the Test Report ............................................................................................................ 4 1.2 Test Facility ................................................................................................................................ 4 1.3 Testing Location......................................................................................................................... 4 2 General Description of Equipment Under Test ............................................................................ 5 2.1 Applicant and Manufacturer Information ................................................................................... 5 2.2 General Information ................................................................................................................... 5 3 Applied Standards .......................................................................................................................... 6 4 Test Configuration .......................................................................................................................... 7 Test Mode ............................................................................................................................................. 7 5 Test Case Results ........................................................................................................................... 8 5.1 Occupied Bandwidth .................................................................................................................. 8 5.2 Radiated Emissions ................................................................................................................. 10 5.3 Conducted Emissions .............................................................................................................. 27 6 Main Test Instruments .................................................................................................................. 30 7 The EUT Appearance .................................................................................................................... 31 8 Test Setup Photos ......................................................................................................................... 32 RF Test Report Report No.: EFTA26050097-IE-05-R1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-04-009R Page 3 of 32 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. Summary of Measurement Results Number Test Case Clause in FCC rules Verdict 1 Occupied Bandwidth 15.223(a) PASS 2 Radiated Emissions 15.223(a), 15. 223(b), 15.209 PASS 3 Conducted Emissions 15.207 PASS Date of Testing: June 30, 2026 ~ July 1, 2026 Date of Sample Received: May 11, 2026 Note: PASS: The EUT complies with the essential requirements in the standard. FAIL: The EUT does not comply with the essential requirements in the standard. All indications of Pass/Fail in this report are opinions expressed by Eurofins TA Technology (Shanghai) Co., Ltd. based on interpretations and/or observations of test results. Measurement Uncertainties were not taken into account and are published for informational purposes only. RF Test Report Report No.: EFTA26050097-IE-05-R1 Eurofins TA Technology (Shanghai) Co., Ltd. TA-MB-04-009R Page 4 of 32 This report shall not be reproduced except in full, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of Eurofins TA Technology (Shanghai) Co., Ltd. The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test Facility FCC (Designation number: CN1179, Test Firm Registration Number: 446626) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA (Certificate Number: 3857.01) Eurofins TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. 1.3 Testing Location Company: Eurofins TA Technology (Shanghai) Co., Ltd. Address: Building 3, No.145, Jintang Rd, Pudong Shanghai, P.R.China City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: https://www.eurofins.com/electrical-and-electronics E-mail: [email protected] RF Test Report Report No.: EFTA26050…

Text truncated - open the document above for the full version.

10 1X 20 1X 210 18X 30 2X 40 1X 50 1X 60 1X 80 2X 100 6X 110 2X 170 2X 180 2X 300 8X 310 4X 320 12X 330 6X 70 1X 140 1X 150 1X 360 1X 1396.6 88.3 290 1X 295 1X 340 1X 230 12X 120 6X 130 6X 370 6X WHERE USED: 10040281 NOTES: ALL ASSEMBLY MATERIALS & PROCESSES MUST BE COMPLIANT WITH CHECKPOINT ENVIRONMENTAL REGULATION 1. COMPLIANCE SPECIFICATION 7299437. ALL PARTS AND ASSEMBLIES TO BE MARKED IN ACCORDANCE WITH CHECKPOINT MARKING STANDARD STD006EN. 2. ANY DEVIATIONS MUST BE PRE-APPROVED BY CHECKPOINT ENGINEERING. LATEST REVISION OF ALL SPECIFICATIONS AND DOCUMENTS REFERENCED WITH THIS DOCUMENT SHALL BE USED.3. ASSEMBLE COMPONENTS USING SPECIFIED HARDWARE AS SHOWN.4. TIGHTEN ALL FASTENERS TO CHECKPOINT STANDARD STD048EN.5. ROUTE ALL CABLES THRU CABLE TIES(ITEM 380-NOT SHOWN) APPROX. 25mm ABOVE CLAMPS(ITEMS 120 AND 130).6. SECURE WIRES IN PLACE. USE PROVIDED CLAMPING RING OF SOUNDER TO MOUNT SOUNDER ONTO SOUNDER PLATE(ITEM20).REMOVE 7. ADHESIVE BACKING FROM LED STRIP TO ADHERE ONTO LED PLATE(ITEM40). ADHERE S/N LABEL(ITEM290) AND UL LABEL(ITEM295) TO FAR SIDE OF COLLAR ON FLAT METAL SURFACES.8. ENSURE MINIMUM CLEARANCE AS SHOWN BETWEEN BASE OF PEDESTAL(ITEM140) AND FERRITE ASSEMBLY(ITEM70).9. LINE ITEMS 120 AND 130 WITH ITEM 370 AS SHOWN PRIOR TO INSTALLATION APPLY MINIMUM TORQUE OF 1.5NM TO ITEM 230 REVISIONS REV.DESCRIPTION/CHANGE NUMBERDATEAPPROVED 00CR2734B2025/5/30HUANGW SHEET SIZE: SCALE: UNLESS OTHERWISE SPECIFIED,GEOMETRIC TOLERANCES REFLECT ISO 2768-1 TOLERANCE CLASS M, MEDIUM 1:10 A3 0 over 6 over 30 over 120 over 400 up to 6 up to 30 up to 120 up to 400 up to 1200 0.1 0.2 0.3 0.5 0.8 BREAK ALL CORNERS AND EDGES. 2024-09-05_SHEET FORMAT FLATNESS WITHIN: 0.6, MACHINED ANGLES: 1 MACHINING TITLE BLOCK DEFAULTS: 8 A 8 A DIMENSION ANGLE SYSTEMS, INC. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. ON: HuangW CREATED BY: . ANTENNA NS20 20250530 00 10040282 SEE NOTESSEE NOTES DWG ASSY FINISH:MATERIAL: 2 OF 1 C CHECKPOINT 2024 = THIS DRAWING AND/OR TECHNICAL INFORMATION IS THE PROPERTY OF CHECKPOINT SYSTEMS, INC. Checkpoint Systems claims proprietary rights to the material disclosed heron. This drawing and/or techincal information is issued in confidence for engineering infomation only and may not be reproduced or used to manufacture anything shown or referred to heron without direct written permission from Checkpoint Systems to the user. This drawing and/or technical information is the property of Checkpoint Systems and is loaned for the mutual assistance, to be returned when its purpose has been served. NOTICE TO PERSONS RECEIVING THIS DRAWING AND/OR TECHINCAL INFORMATION: NO DEVIATION OF THIS DRAWING WILL BE ACCEPTED UNLESS APPROVED BY CHECKPOINT SYSTEMS ENGINEERING DEPARTMENT CRITICAL FIRST SHEET REVISON: PART #: NAME: F E D C B 1234567 1234567 F E D C B 1. CUT A PIECE OF HEAT SHRINK TUBE LENGTH OF 35mm(ITEM400) 2. ADD A CUT OF 5mm TO THE HEAT SHRINK TUBE 3. COVER LED SELECTOR BOARD WITH THE TUBE 4. APPLY CABLE TIES (ITEM390) 5. USE A BUBBLE BAG(ITEM410) TO HOLD THE BOARD AND COAX CABLE 6. HOLD THE BOARD AND COAX CABLE 7. HIDE INSIDE PEDEDTAL ABANDON SHEET SIZE: SCALE: 1:10 A3 2024-09-05_SHEET FORMAT 8 A 8 A SYSTEMS, INC. ON: HuangW CREATED BY: . ANTENNA NS20 20250503 00 10040282 DWG ASSY 2 OF 2 C CHECKPOINT 2024 SHEET REVISON: PART #: NAME: F E D C B 1234567 1234567 F E D C B WHERE USED: 10040281