E8HKT-1082Bluetooth Keyboard

Bluetooth Keyboard Users Manual Getting Start Thank you for choosing this ultrathin keyboard with Bluetooth technology to ensure no hinder communication between the keyboard and your computer without connecting cable. The transmission and receiving of keyboard are free from angle restriction. Features ¾ Use high technological Bluetooth (Broadcom BCM2042). ¾ Powered by 2 AAA batteries ¾ Ultra-low power consumption Product Specification 1. Frequency Range: 2402 MHz ~ 2480 MHz 2. Input Voltage / current: 3Vdc. 30mA 3. Voltage/ Current of charger mode: 2V~3.2VDC 4. Battery State: Battery low detect voltage: 2.2V +/- 5% Cut off detect voltage：2.0V +/- 5% 5. Operation Distance: 10 meter at free space Hot Keys Status light indicator ¾ Battery Status Led Battery low : Red LED brighten 0.5s,and waiting 5sec ¾ Connect Status Led Power ON : Blue LED brighten 5sec Pairing ： Blue LED flash 0.5s/0.5s (3min) Searching: Blue LED brighten 5sec continued to success Before Use ¾ Insert Battery ¾ Set power switch is On Troubleshooting and Tips The keyboard does not operate following installation or is not recognized. • Make sure the batteries are not too weak. • To determine whether the keyboard, mouse or computer causes the problem test the keyboard and mouse on a second computer if possible; or test another keyboard and mouse on your current computer. If you are still unable to solve the problem, please contact your point of sale or your dealer. If you need to exchange the keyboard, please note that you must return it to your dealer in its original packaging and also a produce proof of purchase (receipt). Keep your receipt in a safe place after purchase.

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 Federal Communications Commission Authorization and Evaluation Division Date: 3/21/2011 Confidentiality Request FCC ID: E8HKT-1082 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Thank you! Sincerely yours, ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 Power of Attorney To whom it may concern: Date: March 21, 2011 We, the undersigned, Chicony Electronics Co., Ltd., hereby authorize Bureau Veritas Consumer Products Services(H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. Product Name Model FCC ID Wireless Keyboard KT-1081, KT-1082 E8HKT-1082 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Page: 1 MODEL: KT-1081 Page: 2 MODEL: KT-1082

FCC ID: E8HKT-1082 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page: 3 MODEL: KT-1081 Page: 4 Page: 5 Page: 6 Page: 7 MODEL: KT-1082 Page: 8 Page: 9 Page: 10

FCC ID: E8HKT-1082 Report No.: RF110302D10 Operational Description The device is a Frequency Hopping device with 79 hopping frequencies. The antenna type is Printed antenna and there is no antenna connector used. The EUT is a unit that contains a Bluetooth radio module. Bluetooth is a short-range wireless technology operating in the 2.4GHz band. It enables devices to have the ability to form networks and exchange information. The other instruction, please have a look at the user’s manual.

Report No: SA110302D10 1 Report Format Version 4.0.0 RF EXPOSURE REPORT REPORT NO.: SA110302D10 MODEL NO.: KT-1081, KT-1082 FCC ID: E8HKT-1082 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT : Chicony Electronics Co., Ltd. ADDRESS : No. 25, Wu-Gong 6th Rd., Wu Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No: SA110302D10 2 Report Format Version 4.0.0 Conclusion No Evaluation Required if power is below this threshold: F(GHz) mW Low 2.402 High 2.480 24.58 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power -1.1 0.8 EIRP Power -3.1 0.5 *Note: The antenna is Printed antenna with -1.98 dBi gain Threshold for no SAR evaluation is 24.58mW Transmitter power is 0.8mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No.: RF110302D10 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110302D10 MODEL NO.: KT-1081, KT-1082 FCC ID: E8HKT-1082 RECEIVED: Mar. 2, 2011 TESTED: Mar. 4 ~ 8, 2011 ISSUED: Mar. 17, 2011 APPLICANT: Chicony Electronics Co., Ltd. ADDRESS: No. 25, Wu-Gong 6th Rd., Wu Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110302D10 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................4 1. CERTIFICATION........................................................................................5 2. SUMMARY OF TEST RESULTS...............................................................6 2.1 MEASUREMENT UNCERTAINTY.............................................................7 3. GENERAL INFORMATION........................................................................8 3.1 GENERAL DESCRIPTION OF EUT..........................................................8 3.2 DESCRIPTION OF TEST MODES............................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST......................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL...........11 3.3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..........................13 3.3.4 DESCRIPTION OF SUPPORT UNITS.....................................................13 4. TEST TYPES AND RESULTS..................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT...........................................14 4.2 RADIATED EMISSION MEASUREMENT................................................14 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.............................14 4.2.2 TEST INSTRUMENTS.............................................................................15 4.2.3 TEST PROCEDURES.............................................................................16 4.2.4 DEVIATION FROM TEST STANDARD....................................................16 4.2.5 TEST SETUP...........................................................................................17 4.2.6 EUT OPERATING CONDITIONS.............................................................17 4.2.7 TEST RESULTS......................................................................................18 4.3 NUMBER OF HOPPING FREQUENCY USED........................................23 4.3.1 LIMIT OF HOPPING FREQUENCY USED..............................................23 4.3.2 TEST INSTRUMENTS.............................................................................23 4.3.3 TEST PROCEDURES.............................................................................23 4.3.4 DEVIATION FROM TEST STANDARD....................................................24 4.3.5 TEST SETUP...........................................................................................24 4.3.6 TEST RESULTS......................................................................................24 4.4 DWELL TIME ON EACH CHANNEL........................................................26 4.4.1 LIMIT OF DWELL TIME USED................................................................26 4.4.2 TEST INSTRUMENTS.............................................................................26 4.4.3 TEST PROCEDURES.............................................................................26 4.4.4 DEVIATION FROM TEST STANDARD....................................................26 4.4.5 TEST SETUP...........................................................................................27 4.4.6 TEST RESULTS......................................................................................27 4.5 CHANNEL BANDWIDTH.........................................................................30 4.5.1 LIMITS OF CHANNEL BANDWIDTH.......................................................30 4.5.2 TEST INSTRUMENTS.............................................................................30 4.5.3 TEST PROCEDURE................................................................................30 Report No.: RF110302D10 3 Report Format Version 4.0.0 4.5.4 DEVIATION FROM TEST STANDARD....................................................31 4.5.5 TEST SETUP...........................................................................................31 4.5.6 EUT OPERATING CONDITION...............................................................31 4.5.7 TEST RESULTS......................................................................................32 4.6 HOPPING CHANNEL SEPARATION.......................................................33 4.6.1 LIMIT OF HOPPING CHANNEL SEPARATION.......................................33 4.6.2 TEST INSTRUMENTS.............................................................................33 4.6.3 TEST PROCEDURES.............................................................................33 4.6.4 DEVIATION FROM TEST STANDARD....................................................33 4.6.5 TEST SETUP...........................................................................................33 4.6.6 TEST RESULTS......................................................................................34 4.7 MAXIMUM PEAK OUTPUT POWER.......................................................35 4.7.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT........35 4.7.2 TEST INSTRUMENTS.................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST