E8HKT-1087Bluetooth keyboard

KT-1087 BLUETOOTH KEYBOARD USER MANUAL Getting Start Thank you for choosing this ultrathin keyboard with Bluetooth technology to ensure no hinder communication between the keyboard and your computer without connecting cable. The transmission and receiving of keyboard are free from angle restriction. Features ¾ Use high technological Bluetooth (Broadcom BCM2042). ¾ Powered by 2 AA batteries ¾ Ultra-low power consumption Product Specification 1. Frequency Range: 2402 MHz ~ 2480 MHz 2. Input Voltage / current: 3Vdc. 30mA 3. Battery State: Battery low detect voltage: 2.2V +/- 5% Cut off detect voltage：2.0V +/- 5% 4. Operation Distance: 10 meter at free space 5. Operatiing Temperature: -10°C ~ +40°C 6. Storage Temperature: -40°C ~ +85°C System Support : HP Web OS Keyboard Dimensions : X= 285.5mm, Y= 130.2mm, Z= 6.4mm Keyboard weight : Weight: 360+/-10g (with 2 X AA batteries) Power Switch The keyboard shall support a power slider with two states: • Off – the keyboard and components shall be powered off and not draw power from the battery • On – the keyboard shall be on and draw power based on the power behaviour defined earlier State Indicator LED: • When in pairing mode the LED shall flash green every 3 seconds until the keyboard has exited pairing mode. • When the keyboard has successfully paired to a device the LED shall show solid green for a period of 5 seconds • Once the keyboard is paired with a partner the LED shall not turn on when resuming from sleep Special Function Keys: Key Name Function Additional Function CARD VIEW Invokes and dismisses Card View REMINDERS Maximize and minimize reminders KEYBOARD Invokes and dismisses Virtual keyboard BRIGHTNESS + Increases Screen brightness BRIGHTNESS - Decreases Screen brightness PLAY/PAUSEPress to play or pause song REVERSE Press once to go to previous song Press and Hold to rewind thru current song FORWARD Press once to go to next song Press and Hold to forward thru current song VOL + Increase volume VOL - Decrease Volume MUTE Mute sound POWER LCD Screen On and Off Press and Hold to bring up Power modes CONTROL Shortcut Key LAUNCHER Invokes and dismisses Launcher (Apps) SYMBOL Invokes and dismisses Symbol table Sym + Key brings up relative symbols CURSOR LEFT, RIGHT, UP AND DOWN Moves cursor relative to its onscreen position; in direction of arrow key Shift + Cursor key highlights text/content from current cursor position in direction of arrow keys SHIFT Hold Shift to capitalizes letters or select alternate symbol See cursor keys above TAB Indents sentence/ paragraph Tabs thru text fields (e.g. web pages / forms) FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful Interference, and (2) This device must accept any interference received, including interference that may cause undesired operation . IMPORTANT NOTE: Radiation Exposure Statement: The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada Statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. WARNING: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. CAUTION: AVOID PROLONGED USE OF THE KEYBOARD WITHOUT BREAKS. Take regular breaks and keep a good posture. Consult your physician promptly if you notice any lost of motion or pain in your wrist when using the keyboard.

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 April 27, 2011 Declaration letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement FCC ID: E8HKT-1087 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 Federal Communications Commission Authorization and Evaluation Division Date: 4/26/2011 Confidentiality Request FCC ID: E8HKT-1087 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Thank you! Sincerely yours, ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 Power of Attorney To whom it may concern: Date: April 26, 2011 We, the undersigned, Chicony Electronics Co., Ltd., hereby authorize Bureau Veritas Consumer Products Services(H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. Product Name Model FCC ID Bluetooth Keyboard KT-1087 E8HKT-1087 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Chicony Electronics Co., Ltd. No.25 Wu-Gong 6 Th Rd. Wu-Ku Industrial Park, Taipei, Taiwan, R.O.C. Tel: 886-2-22988120 Fax: 886-2-22989745 Federal Communications Commission Authorization and Evaluation Division Date: May 4, 2011 Confidentiality Request FCC ID: E8HKT-1087 Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information until Oct. 25, 2011 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External Photos Test Setup Photos User’s Manual Internal Photo Thank you! Sincerely yours, ------------------------------------------ T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-2298-8120 Fax: +886 2-2298-9745 E-mail : [email protected]

Page: 1

DWG NO.: NOTES NOTES NOTES MODEL NO. MODEL NO.: REMARKPART NO. MAT.: TOL: UNIT: MM Q'TYSIZE: A4 SPEC: APPROVEDCHECKEDDESIGNED NAME: FINISH: REV: 0 HP KT-1087 KT-1087 04/25-'11 04/25-'11 04/25-'11 253-01087L-A SPEC. ID LABEL SCALE: 1 : 1 REV LTRDATEDESIGN APPROVEREV. DIMENSION B C D TAMMYWADE NOTES: KT-1087-FCC(HP)-X7 VENDER UL MARK CEM 2 \ CEM2 CEM 3 \ CEM3 MAORUI \ CEM2M 1. MATERIAL: SYNTHETIC MYLAR + TEXTURE SATIN t=0.15mm 2. BACKGROUND COLOR: JACK BLACK 3. TEXT & SYMBOLS COLOR: PANTONE 429C 4. RELEASE LINER: REG2 5. LABEL VENDOR HAS TO BE APPRD. BY UL/CSA 6. The product and component need comply with HP GSE. 7. The Paint and the Glue must meet RoHS II specification. Drawing reference for trial run only E164844 E8HKT-1087 N279 5524A-KT1087 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: E8HKT-1087 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Page: 2 Page: 3 Page: 4 Page: 5 Page: 6 110412D15 110412D15

FCC ID: E8HKT-1087 Report No.: RF110421D15 Operational Description The device is a Frequency Hopping device with 79 hopping frequencies. The antenna type is Printed antenna and there is no antenna connector used. The EUT is a unit that contains a Bluetooth radio module. Bluetooth is a short-range wireless technology operating in the 2.4GHz band. It enables devices to have the ability to form networks and exchange information. The other instruction, please have a look at the user’s manual.

Report No: SA110412D15 1 Report Format Version 4.0.0 RF EXPOSURE REPORT REPORT NO.: SA110412D15 MODEL NO.: KT-1087 FCC ID: E8HKT-1087 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT : Chicony Electronics Co., Ltd. ADDRESS : No. 25, Wu-Gong 6th Rd., Wu Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan Report No: SA110412D15 2 Report Format Version 4.0.0 Conclusion No Evaluation Required if power is below this threshold: F(GHz) mW Low 2.402 High 2.480 24.58 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power -0.6 0.9 EIRP Power -1.0 0.8 *Note: The antenna is Printed antenna with -0.39 dBi gain Threshold for no SAR evaluation is 24.58mW Transmitter power is 0.9mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold ---END---

Report No.: RF110412D15 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110412D15 MODEL NO.: KT-1087 FCC ID: E8HKT-1087 RECEIVED: Apr. 12, 2011 TESTED: Apr. 15, 2011 ISSUED: Apr. 26, 2011 APPLICANT: Chicony Electronics Co., Ltd. ADDRESS: No. 25, Wu-Gong 6th Rd., Wu Ku Industrial Park, Taipei Hsien, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien, 244 Taiwan This test report consists of 44 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF110412D15 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD................................................................................4 1. CERTIFICATION........................................................................................5 2. SUMMARY OF TEST RESULTS...............................................................6 2.1 MEASUREMENT UNCERTAINTY.............................................................7 3. GENERAL INFORMATION........................................................................8 3.1 GENERAL DESCRIPTION OF EUT..........................................................8 3.2 DESCRIPTION OF TEST MODES............................................................9 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST......................................10 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL...........11 3.3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS..........................13 3.3.4 DESCRIPTION OF SUPPORT UNITS.....................................................13 4. TEST TYPES AND RESULTS..................................................................14 4.1 CONDUCTED EMISSION MEASUREMENT...........................................14 4.2 RADIATED EMISSION MEASUREMENT................................................14 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT.............................14 4.2.2 TEST INSTRUMENTS.............................................................................15 4.2.3 TEST PROCEDURES.............................................................................16 4.2.4 DEVIATION FROM TEST STANDARD....................................................16 4.2.5 TEST SETUP...........................................................................................17 4.2.6 EUT OPERATING CONDITIONS.............................................................17 4.2.7 TEST RESULTS......................................................................................18 4.3 NUMBER OF HOPPING FREQUENCY USED........................................23 4.3.1 LIMIT OF HOPPING FREQUENCY USED..............................................23 4.3.2 TEST INSTRUMENTS.............................................................................23 4.3.3 TEST PROCEDURES.............................................................................23 4.3.4 DEVIATION FROM TEST STANDARD....................................................24 4.3.5 TEST SETUP...........................................................................................24 4.3.6 TEST RESULTS......................................................................................24 4.4 DWELL TIME ON EACH CHANNEL........................................................26 4.4.1 LIMIT OF DWELL TIME USED................................................................26 4.4.2 TEST INSTRUMENTS.............................................................................26 4.4.3 TEST PROCEDURES.............................................................................26 4.4.4 DEVIATION FROM TEST STANDARD....................................................26 4.4.5 TEST SETUP...........................................................................................27 4.4.6 TEST RESULTS......................................................................................27 4.5 CHANNEL BANDWIDTH.........................................................................30 4.5.1 LIMITS OF CHANNEL BANDWIDTH.......................................................30 4.5.2 TEST INSTRUMENTS.............................................................................30 4.5.3 TEST PROCEDURE................................................................................30 4.5.4 DEVIATION FROM TEST STANDARD....................................................31 4.5.5 TEST SETUP...........................................................................................31 4.5.6 EUT OPERATING CONDITION...............................................................31 4.5.7 TEST RESULTS......................................................................................32 4.6 HOPPING CHANNEL SEPARATION.......................................................33 4.6.1 LIMIT OF HOPPING CHANNEL SEPARATION.......................................33 4.6.2 TEST INSTRUMENTS.............................................................................33 Report No.: RF110412D15 3 Report Format Version 4.0.0 4.6.3 TEST PROCEDURES.............................................................................33 4.6.4 DEVIATION FROM TEST STANDARD....................................................33 4.6.5 TEST SETUP...........................................................................................33 4.6.6 TEST RESULTS......................................................................................34 4.7 MAXIMUM PEAK OUTPUT POWER.......................................................35 4.7.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT........35 4.7.2 TEST INSTRUMENTS............................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST