E8HMT-2103Bluetooth Mouse

MT-2103 Bluetooth Mouse Users’ Manual Getting Started Thank you for choosing this mouse with state-of-art Bluetooth technology to ensure no hinder communication between the mouse and Google Chrome OS systems and certified with WWCB. Package Content 1 x Mouse MT-2103 1 x Quick Start Guide 2 x AAA battery Features  Use high technological Bluetooth (BLE5.2)  Low power consumption (24 months with 2xAAA battery)  WWCB certificated mouse Product Specification Electrical Specification 1. BT Connection distance: 10M 2. I nput Voltage / current: 3.0V / 10mA 3. Battery: 2 x AAA battery 4. Battery State: Cut off detect voltage：2.0V +/- 0.1V 5. Power Led Indication: Power On: Blue led brightens for 3 seconds. Pairing mode: Blue led keep blinking for 3 mins. 6. Battery Led Indication: The device's low battery threshold should be set to 15% of the battery's usable capacity MT-2103 Bluetooth Mouse Users’ Manual Mechanical Outline Pairing  Pairing Mode Press and hold the power button for 3 seconds to until Blue Led keeps blinking.  Connect to System Choose the identified mouse (MT-2103 Bluetooth Mouse) and connect it with your system. When “This device has been successfully added to this computer” window displayed, you can start use this Bluetooth mouse. Power Off Switch the power button to OFF. MT-2103 Bluetooth Mouse Users’ Manual Troubleshooting and Tips The mouse does not operate following installation or is not recognized: • Make sure the batteries capacity are enough. • To determine whether the keyboard, mouse or computer causes the problem test the keyboard and mouse on another computer if possible; or test another keyboard and mouse on your current computer. If you are still unable to solve the problem, please contact your point of sale or your dealer. If you need to exchange the mouse, please note that you must return it to your dealer in its original packaging with a produce proof of purchase (receipt). Keep your receipt in a safe place after purchasing. MT-2103 Bluetooth Mouse Users’ Manual FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful Interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Radiation Exposure Statement: This radio device product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Déclaration d'exposition aux radiations: Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l'appareil peut être conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.

Chicony Electronics Co., Ltd. No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Tel: 886-2-6626-6788 Fax: 886-2-2995-8729 Date: 2021-06-02 FCC ID:E8HMT-2103 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-6626-6788 Fax: +886 2-2995-8729 E-mail : [email protected]

Chicony Electronics Co., Ltd. No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Tel: 886-2- 6626-6788 Fax: 886-2-2995-8729 Date: 2021-06-02 FCC ID:E8HMT-2103 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Chicony Electronics Co., Ltd. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on Chicony Electronics Co., Ltd.‘S behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, T.S.Chen / Manager Chicony Electronics Co., Ltd. Tel: +886 2-6626-6788 Fax: +886 2-2995-8729 E-mail : [email protected]

Reference No.:BEBU-WTW-P21050663_ExtPho Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BEBU-WTW-P21050663_ExtPho Page 2/3 Reference No.:BEBU-WTW-P21050663_ExtPho Page 3/3

Reference No.:BEBU-WTW-P21050663_IntPho Page 1/3 CONSTRUCTION PHOTOS OF EUT Reference No.:BEBU-WTW-P21050663_IntPho Page 2/3 Reference No.:BEBU-WTW-P21050663_IntPho Page 3/3 Antenna

Report No.: SABEBU-WTW-P21050663 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SABEBU-WTW-P21050663 FCC ID: E8HMT-2103 Test Model: MT-2103 Received Date: May 18, 2021 Test Date: May 18, 2021 Issued Date: May 26, 2021 Applicant: Chicony Electronics Co., Ltd. Address: No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SABEBU-WTW-P21050663 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Evaluation Result .................................................................................................................................. 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: SABEBU-WTW-P21050663 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SABEBU-WTW-P21050663 Original release. May 26, 2021 Report No.: SABEBU-WTW-P21050663 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Bluetooth Mouse Brand: Chicony Test Model: MT-2103 Sample Status: Engineering sample Applicant: Chicony Electronics Co., Ltd. Test Date: May 18, 2021 Standards: FCC Part 2 (Section 2.1093) IEEE C95.1-1992 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: May 26, 2021 Jessica Cheng / Senior Specialist Approved by : , Date: May 26, 2021 Rex Lai / Associate Technical Manager Report No.: SABEBU-WTW-P21050663 Page No. 5 / 6 Report Format Version: 6.1.1 2 Evaluation Result Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  .  istance are rounded to the nearest mW and mm before calculation.  The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SABEBU-WTW-P21050663 Page No. 6 / 6 Report Format Version: 6.1.1 3 SAR Test Exclusion Thresholds Maximum measured transmitter power: Frequency (GHz) Max. AV Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 10-g extremity SAR test exclusion thresholds R…

Text truncated - open the document above for the full version.

Report No.: RFBEBU-WTW-P21050663 Page No. 1 / 32 Report Format Version: 6.1.1 FCC Test Report (BT LE) Report No.: RFBEBU-WTW-P21050663 FCC ID: E8HMT-2103 Test Model: MT-2103 Received Date: May 18, 2021 Test Date: May 18, 2021 Issued Date: May 26, 2021 Applicant: Chicony Electronics Co., Ltd. Address: No.69, Sec. 2, Guangfu Rd., Sanchong Dist., New Taipei City 241, Taiwan(R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan FCC Registration / Designation Number: 198487 / TW2021 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBEBU-WTW-P21050663 Page No. 2 / 32 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards and References .............................................................. 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 6dB Bandwidth Measurement ........................................................................................................... 22 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 22 4.2.2 Test Setup .......................................................................................................................................... 22 4.2.3 Test Instruments ................................................................................................................................ 22 4.2.4 Test Procedure .................................................................................................................................. 22 4.2.5 Deviation from Test Standard ..........…

Text truncated - open the document above for the full version.

Reference No.: RFBEBU-WTW-P21050663 Page No. 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST <Frequency Range below 1GHz> Reference No.: RFBEBU-WTW-P21050663 Page No. 2 / 2 RADIATED EMISSION TEST <Frequency Range above 1GHz>