EJE-WB0039LifeBook T Series with AR5BXB6 11ABG WLAN & BT

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX I1 FUJITSU NOTEBOOK USER MANUAL (Part 1) Copyright Copyright & Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document. However, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. Microsoft, MS-DOS, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PCMCIA is a trademark of the Personal Computer Memory Card International Association. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks mentioned herein are the property of their respective owners. © Copyright 2005 Fujitsu Computer Systems Corpora- tion. All rights reserved. No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu Computer Systems Corpora- tion. No part of this publication may be stored or trans- mitted in any electronic form without the written consent of Fujitsu Computer Systems Corporation. B6FH-6901-01EN-00 WARNING Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name:Fujitsu Computer Systems Corporation Address:1250 E. Arques Avenue, MS 122 Sunnyvale, CA 94085 Telephone:(408) 746-6000 Declares that product:Model Configuration: LifeBook T4210 Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. T Series.book Page 1 Thursday, July 14, 2005 2:24 PM LifeBook T Series Tablet PC IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed Adapters with an output rating of 19 VDC, with a current of 3.15 A. AC Adapter output polarity: When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: ■ Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. ■ Avoid using the modem during an electrical storm. There may be a remote risk of electric shock from lightning. ■ Do not use the modem to report a gas leak in the vicinity of the leak. ■ Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. ■ To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only System Disposal + Danger of explosion if Lithium (clock) bat- tery is incorrectly replaced. Replace only with the same or equivalent type recom- mended by the manufacturer. Dispose of used batteries according to the manufac- turer’s instruction. For continued protection against risk of fire, replace only with the same type and rating fuse. Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE, OR FEDERAL LAWS. T Series.book Page 2 Thursday, July 14, 2005 2:24 PM Table of Contents Fujitsu LifeBook ® T Series Tablet PC Table of Contents 1 PREFACE Preface About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . 3 Fujitsu Contact Information . . . . . . . . . . . . . . . . . 3 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 GETTING TO KNOW YOUR TABLET PC Overview Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Optional Accessories . . . . . . . . . . . . . . . . . . . . . . 8 Locating the Controls/Connectors Top and Front Components . . . . . . . . . . . . . . . . 11 Left-Side Panel Components . . . . . . . . . . . . . . . 13 Right-Side Panel Components . . . . . . . . . . . . . . 14 Rear Panel Components . . . . . . . . . . . . . . . . . . . 15 Bottom Components . . . . . . . . . . . . . . . . . . . . . 16 Status Indicator Panel Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 17 External Power Indicator. . . . . . . . . . . . . . . . . . . 17 Battery Charging/Level Indicators. . . . . . . . . . . . 17 Optical Drive Access Indicator . . . . . . . . . . . . . . 18 Hard Drive Access Indicator . . . . . . . . . . . . . . . . 18 NumLk Indicator. . . . . . . . . . . . . . . . . . . . . . . . . 18 CapsLock Indicator . . . . . . . . . . . . . . . . . . . . . . . 18 ScrLk Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Security Indicator . . . . . . . . . . . . . . . . . . . . . . . . 18 Display Panel Opening the Display Panel . . . . . . . . . . . . . . . . . 19 Using the System as a Tablet . . . . . . . . . . . . . . . 19 Adjusting Display Panel Brightness . . . . . . . . . . . 20 Keyboard Using the Keyboard . . . . . . .…

Text truncated - open the document above for the full version.

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX I2 FUJITSU NOTEBOOK USER MANUAL (Part 2) 57 5 Troubleshooting T Series.book Page 57 Thursday, July 14, 2005 2:24 PM 58 LifeBook T Series Tablet PC - Section Five T Series.book Page 58 Thursday, July 14, 2005 2:24 PM 59 Troubleshooting Troubleshooting Your LifeBook T Series Tablet PC is sturdy and subject to few problems in the field. However, you may encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices, that you can solve by replacing the device. The information in this section helps you isolate and resolve some of these straightforward problems and identify failures that require service. IDENTIFYING THE PROBLEM If you encounter a problem that you are having diffi- culty in solving, go through the following procedure before pursuing further troubleshooting: 1. Turn off your Tablet PC. 2. Make sure the AC adapter is plugged into your Tablet PC and to an active AC power source. 3. Make sure that any card inserted in the PC Card slot is seated properly. You can also remove the card from the slot, thus eliminating it as a possible cause of failure. 4. Make sure that any devices connected to the external connectors are plugged in properly. You can also disconnect such devices, thus eliminating them as possible causes of failure. 5. Turn on your Tablet PC. Make sure it has been off at least 10 seconds before you turn it on. 6. Go through the boot sequence. 7. If the problem has not been resolved, refer to the Troubleshooting Table, that follows, for more detailed troubleshooting information. 8. If you still have the problem after taking all of the above approaches, please check our Web site at http://www.computers.us.fujitsu.com/support for possible known support issues. 8. If you have tried the solutions suggested in the Troubleshooting Table and checked our Web site for possible solutions without success, contact your support representative: Toll free: 1-800-8Fujitsu E-mail: [email protected] Web site: http://www.computers.us.fujitsu.com/ support Before you place the call, you should have the following information ready so that the customer support repre- sentative can provide you with the fastest possible solu- tion: ■ Product name ■ Product configuration number ■ Product serial number ■ Purchase date ■ Conditions under which the problem occurred ■ Any error messages that have occurred ■ Type of device connected, if any See the Configuration Label on the bottom of your Tablet PC for configuration and serial numbers. (See figure 2-8 on page 16 for location) SPECIFIC PROBLEMS Using the Troubleshooting Table When you have problems with your tablet, try to find the symptoms under the Problem column of the trou- bleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your Tablet PC. ■ If you keep notes about what you have tried, your support representative may be able to help you more quickly by giv- ing additional suggestions over the phone. ■ Do not return a failed Tablet PC to your supplier until you have talked to a sup- port representative. T Series.book Page 59 Thursday, July 14, 2005 2:24 PM 60 LifeBook T Series Tablet PC - Section Five TROUBLESHOOTING TABLE ProblemPage Audio Problems . . . . . . . . . . . . . . . . . . . . . . . . . . page 60 Docking Problems . . . . . . . . . . . . . . . . . . . . . . . . page 60 Hard Drive Problems . . . . . . . . . . . . . . . . . . . . . . page 60 Keyboard or Mouse Problems . . . . . . . . . . . . . . . page 60 Pen Input Problems . . . . . . . . . . . . . . . . . . . . . . . page 61 Infrared Problems . . . . . . . . . . . . . . . . . . . . . . . . page 61 Memory Problems . . . . . . . . . . . . . . . . . . . . . . . . page 61 ProblemPage Modem Problems. . . . . . . . . . . . . . . . . . . . . . . . . page 61 USB Device Problems . . . . . . . . . . . . . . . . . . . . . page 62 PC Card Problems . . . . . . . . . . . . . . . . . . . . . . . . page 62 Power Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . page 62 Shutdown and Startup Problems . . . . . . . . . . . . page 64 Video Problems . . . . . . . . . . . . . . . . . . . . . . . . . . page 65 Miscellaneous Problems . . . . . . . . . . . . . . . . . . . page 66 ProblemPossible CausePossible Solutions Audio Problems There is no sound coming from the built-in speakers. The software volume control is set too low. Adjust the sound volume control settings in your software, operating system and applications. Headphones are plugged into your Tablet PC. Plugging in headphones disables the built-in speakers, remove the headphones. Software driver is not config- ured correctly. Refer to your application and operating system documentation for help. Sound could have been muted with function keys. Press [F3] while holding the [Fn] key to toggle the sound on and off. Port Replicator Problems Tablet PC does not turn on when installed in optional Port Replicator Port Replicator AC adapter is not plugged in. Provide power to the Port Replicator. Tablet PC is not properly seated in the Port Replicator. Remove and re-dock your Tablet PC. Hard Drive Problems You cannot access your hard drive. The setup utility is incorrectly set for your internal (Primary Master) hard drive. Revise BIOS settings to set the Primary Master correctly. See “BIOS Setup Utility” on page 36. The wrong drive designator was used by an application when a bootable CD-ROM was used to start the Tablet PC. Verify drive designator used by application is in use by the operating system. When the operating system…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 57 Assembly Drive, Tullamarine VIC 3043 Australia Ph: +613 9335 3333 Fax: +613 9338 9260 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 57 Assembly Drive Tullamarine Victoria Australia 3043 Ph: + 613 9335 3333 Fax: + 613 9338 9260 email: [email protected] To: Federal Communications Commission Attention: Certification Manager, OET No. of pages: 1 From: Donna Cleary Date: 18 th March 2006 EMC Ref: M060246_Cert_AR5BXB6_DTS_BT Subject: FCC APPROVAL – FCC ID: EJE-WB0039 Please receive EMC Technologies’ Report M060246_Cert_AR5BXB6_DTS_BT for review. The EUT is a Fujitsu notebook PC, Model: T4210 with Atheros Mini-PCI Wireless LAN Module (XB62 11a+b/g), Model: AR5BXB6 & TAIYO YUDEN Bluetooth Module, Model: EYTF3CSFT. The Atheros WLAN module was originally certified by Atheros as a modular approval under FCC ID: PPD-AR5BXB6-M (Canada ID: 4104A-AR5BXB6). The Bluetooth module was originally certified by TAIYO YUDEN as a modular approval under FCC ID: RYYEYTF3CSFT (Canada ID: 4389AEYTF3CSFT). The intention of this application is to FCC certify Atheros Mini-PCI Wireless LAN Module (XB62 11a+b/g), Model: AR5BXB6 & TAIYO YUDEN Bluetooth Module, Model: EYTF3CSFT installed in Fujitsu notebook PC, Model: T4210 This is a composite submission. Test results are recorded as follows: DTS Submission EMC Technologies Report – M060246_Cert_AR5BXB6_DTS_BT Test results - FCC Part 15.247 (Part C) - (802.11b, 802.11g & 802.11a DTS results). Documents submitted: Report Number: M060246_Cert_AR5BXB6_DTS_BT & all appendices. Required FCC Forms: Agent Authority, Confidentiality Request. The 802.11a (U-NII) section of the WLAN transmitter & the Bluetooth results are submitted separately under UNII & DSS submissions. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. Their corresponding FRNs are 0009379173 and 0013134713. The FCC ID for this composite application is EJE-WB0039 Regards ______________ Donna Cleary Report Secretary EMC Technologies Pty Ltd

18th March 2006

__________________________________________________________________ EMC Technologies Pty Ltd, 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 57 Assembly Drive Tullamarine Victoria Australia 3043 Ph: + 613 9335 3333 Fax: + 613 9338 9260 email: [email protected] To: Federal Communications Commission Attention: Dianne Poole From: EMC Technologies Pty Ltd FCC ID: EJE-WB0039 (731 Confirmation Number: EA585913) Correspondence Reference No 30838 Subject: Information Request Date: 5 th May 2006 In accordance with the information request received from the FCC Equipment Authorisation Branch (Dianne Poole), the following files have been uploaded into FCC ID: EJE-WB0039, Correspondence Reference Number 30838: 1. DTS application - Appendix G revised to remove band 5470-5725. Revised file uploaded 2. DTS Report M060246_Cert_AR5BXB6_DTS_BT revised. All references to band 5470-5725 MHz removed. Revised DTS Report uploaded 3. User Manual was revised and uploaded into NII application (EA858770), due to inclusion of required compliance information (i.e. compliance statement) for Industry Canada approval. Copy of this revised User Manual uploaded into DTS application today. IC compliance statement located in Appendix I2 User Manual (part 2), page 45 of 75. 4. DTS SAR exhibits: 5 GHz Report - 5470-5725 band removed from 5GHz SAR report/plots. Revised 5 GHz SAR report uploaded 2.4 GHz Report uploaded again to ensure that report received in its entirety.

Federal Communications Commission Date:18 th March 2006 Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21045 Subject: Request for Confidentiality for FCC Certification Application Company: Fujitsu Limited Pursuant to Rule 47 CFR, Chapter 1, Section 0.457(d)(1)(ii), Fujitsu Limited requests that prior to the equipment authorization grant for the (test sample) the entire application be classified and deemed confidential by the Federal Communications Commission (FCC) and as such be withheld from public inspection. As per 47 CFR, Chapter 1, Section 0.457, the exhibits tendered for the purpose of this grant, contain details of trade secrets and technical data that is not made available to competitors and the general public. This information is treated in a confidential manner by Fujitsu Limited and guarded from disclosure to our competitors. The exhibits outlined below are not routinely made available to Fujitsu Limited, with such access granted only to those specifically involved with this particular project. They contain information detailing the unique technology and circuitry of the product that would be of significant benefit to our competitors. All employees treat this technical data in a confidential manner. The manufacture of this product has taken place after an extensive research and development process that has seen the company invest a considerable amount of time and money. The time and effort taken has enabled the product to meet the specific demands of the competitive market for which it is intended and it would be therefore detrimental to allow competitors easy access to design and development details. Apart from a limited number of employees, the information has previously only been disclosed to the Test House responsible for conducting testing and authorized to act as our agent during the certification process. Pursuant to 47CFR Chapter 1, Section 0.459, Fujitsu Limited requests post-grant confidentiality for the following items, ensuring that this material continue to be withheld from public inspection following the grant. Exhibits: Schematics, Block Diagram, Operational Description, Antenna Information, Sincerely Yours,

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX B1 Test Sample External Photographs FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au WLAN – AR5BXB6

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX H FCC LABELLING DETAILS

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX B3 WLAN and Antenna Location Photographs FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au WLAN Location WLAN Location (exploded view) WLAN FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au WLAN Antenna Locations WLAN Antenna Host T4210

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX B4 Test Sample Internal Photographs FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au WLAN – AR5BXB6

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX G WLAN Specifications Page 1 of 4 BPF FEM ANT_CON ANT_CON BALUN BALUN Control Voltage PCI EXPRESS BPF MINICARD CONNECTOR EEPROM OPB XLNA OPB : OUTPUT POWER BOOSTER BPF : BAND PASS FILTER PDET : POWER DETECTOR ANT_CON : ANTENNA CONNECTOR XLNA : EXTERNAL LOW NOISE AMPLIFIER 40MHz XTAL AR5424A PNP 3.3V SUPPLY 1.8V LPF LPF FEM : FRONT END MODULE 3.3V 5GHz PDET 2GHz PDET 5GHz Rx 2GHz Rx 5GHz Tx 2GHz Tx 2GHz Tx 5GHz Tx AR5BXB6 Specification: 1. Model: AR5BXB6 2. Description: 802.11a/b/g PCI Express Module 3. Radio Frequency Bandwidth, also known as operating frequencies: 2400-2.483.5MHz 5150-5350MHz 5470-5725MHz 5725-5.850MHz (NOTE: Product will be configured for each country according to allowed legal frequency allocation). 4. Classification of Emission: 15M0G2D (802.11b mode).& 20M0W7D for 11a/b/g 5. RF Channel Spacing: 5MHz.in 2.4Ghz band and 20MHz in 5Ghz band 6. Nominal Voltage – 3.3V 7. Modulation: DSSS, OFDM, CCK 8. Channel Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) 9. Duty Cycle : High 10. ITU Emission Classification: 15M02G2D and 20M0W7D For more information, please refer FCC Part 15, EN300328, EN301893, EN301489 and EN60950.

FCC ID: EJE-WB0039 (IC: 337J-WB0039) Report No. M060246_Cert_AR5BXB6_DTS_BT EMC Technologies Pty Ltd – 57 Assembly Drive, Tullamarine VIC 3043 Australia www.emctech.com.au EMC Technologies Report Number: M060246_Cert_AR5BXB6_DTS_BT APPENDIX G WLAN Specifications Page 1 of 4 BPF FEM ANT_CON ANT_CON BALUN BALUN Control Voltage PCI EXPRESS BPF MINICARD CONNECTOR EEPROM OPB XLNA OPB : OUTPUT POWER BOOSTER BPF : BAND PASS FILTER PDET : POWER DETECTOR ANT_CON : ANTENNA CONNECTOR XLNA : EXTERNAL LOW NOISE AMPLIFIER 40MHz XTAL AR5424A PNP 3.3V SUPPLY 1.8V LPF LPF FEM : FRONT END MODULE 3.3V 5GHz PDET 2GHz PDET 5GHz Rx 2GHz Rx 5GHz Tx 2GHz Tx 2GHz Tx 5GHz Tx AR5BXB6 Specification: 1. Model: AR5BXB6 2. Description: 802.11a/b/g PCI Express Module 3. Radio Frequency Bandwidth, also known as operating frequencies: 2400-2.483.5MHz 5150-5350MHz 5725-5.850MHz (NOTE: Product will be configured for each country according to allowed legal frequency allocation). 4. Classification of Emission: 15M0G2D (802.11b mode).& 20M0W7D for 11a/b/g 5. RF Channel Spacing: 5MHz.in 2.4Ghz band and 20MHz in 5Ghz band 6. Nominal Voltage – 3.3V 7. Modulation: DSSS, OFDM, CCK 8. Channel Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) 9. Duty Cycle : High 10. ITU Emission Classification: 15M02G2D and 20M0W7D For more information, please refer FCC Part 15, EN300328, EN301893, EN301489 and EN60950.

FCC ID: EJE-WB0038 IC: 337J-WB0038 EMC Report No.M060247_CERT_ AR5BXB6_SAR_2.4 Page 1 of 61 EMC Technologies is a NATA Accredited Laboratory complying with the requirements specified in ISO/IEC 17025 and results produced are traceable to national standards of measurement. This document shall not be reproduced, except in full. Nata Accredited Laboratory Number: 5292 SAR Test Report Report Number: M060247_CERT_ AR5BXB6_SAR_2.4 Test Sample: Portable Tablet Computer Wireless LAN Model Number: AR5BXB6 Tested For: Fujitsu Australia Pty Ltd FCC ID: EJE-WB0039 IC: 337J-WB0039 Date of Issue: 28 th March 2006 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. EMC Technologies Pty Ltd A.C.N. 057 105 549 57 Assembly Drive Tullamarine Victoria Australia 3043 Ph: + 613 9335 3333 Fax: + 613 9338 9260 email: [email protected] FCC ID: EJE-WB0039 IC: 337J-WB0039 Report No. M060247_CERT_ AR5BXB6_SAR_2.4 Page 2 of 61 This document shall not be copied or reproduced, except in full without the written permission of the Technical Director , EMC Technologies Pty. Ltd. www. emctech.com.au CONTENTS 1.0 GENERAL INFORMATION.................................................................................................. 3 2.0 DESCRIPTION OF DEVICE ................................................................................................. 4 2.1 Description of Test Sample .................................................................................................. 4 2.1.1 Summary of EUT Details .................................................................................................. 4 2.1.2 EUT Host Details .............................................................................................................. 5 2.2 Test sample Accessories ..................................................................................................... 5 2.2.1 Battery Types ...................................................................................................................5 2.3 Test Signal, Frequency and Output Power........................................................................... 6 2.4 Battery Status....................................................................................................................... 7 2.5 Details of Test Laboratory .................................................................................................... 7 2.5.1 Location............................................................................................................................ 7 2.5.2 Accreditations ................................................................................................................... 7 2.5.3 Environmental Factors...................................................................................................... 8 3.0 DESCRIPTION OF SAR MEASUREMENT SYSTEM .................................................. 8 3.1 Probe Positioning System .................................................................................................... 8 3.2 E-Field Probe Type and Performance .................................................................................. 8 3.3 Data Acquisition Electronics ................................................................................................. 8 3.4 Calibration and Validation Procedures and Data .................................................................. 8 3.4.1 Validation Results @ 2450MHz ........................................................................................ 9 3.4.2 Deviation from reference validation values ....................................................................... 9 3.4.3 Liquid Depth 15cm.......................................................................................................... 10 3.5 Phantom Properties (Size, Shape, Shell Thickness) .......................................................... 11 3.6 Tissue Material Properties.................................................................................................. 12 3.6.1 Liquid Temperature and Humidity................................................................................... 12 3.7 Simulated Tissue Composition Used for SAR Test ............................................................ 13 3.8 Device Holder for Laptops and P 10.1 Phantom ................................................................ 13 4.0 SAR MEASUREMENT PROCEDURE USING DASY4 .............................................. 14 5.0 MEASUREMENT UNCERTAINTY ................................................................................... 15 6.0 EQUIPMENT LIST AND CALIBRATION DETAILS .................................................... 17 7.0 OET BULLETIN 65 – SUPPLEMENT C TEST METHOD ......................................... 18 7.1.1 “Tablet” Position Definition (0mm spacing) ..................................................................... 18 7.1.2 “Lap Arm Held” Position (0mm spacing) ......................................................................... 18 7.1.3 “Edge” Position (0mm spacing) ...................................................................................... 18 7.2 List of All Test Cases (Antenna In/Out, Test Frequencies, User Modes) ............................ 19 7.3 FCC RF Exposure Limits for Occupational/ Controlled Exposure....................................... 19 7.4 FCC RF Exposure Limits for Un-controlled/Non–occupational ........................................... 19 …

Text truncated - open the document above for the full version.

FCC ID: EJE-WB0039 IC: 337J-WB0039 Report No. M060247_CERT_ AR5BXB6_SAR_2.4 Page 29 of 61 This document shall not be copied or reproduced, except in full without the written permission of the Technical Director , EMC Technologies Pty. Ltd. www. emctech.com.au APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for the “Lap Arm Held” and “Tablet” tested configurations. The spatial peak SAR values were assessed with the procedure described in this report. Table 22: 2450 MHz DSSS Band SAR Measurement Plot Numbers Plot 1 Lap Arm Held Position – Ant A – Pre-scan CH#06 Plot 2 Lap Arm Held Position – Ant B – Pre-scan CH#06 Plot 3 Lap Arm Held Position – Ant A CH#01 Plot 4 Lap Arm Held Position – Ant A CH#06 Plot 5 Lap Arm Held Position – Ant A CH#11 Z-Axis Graphs Z-Axis graphs for Plots 3 to 5 Plot 6 Lap Arm Held Position – Ant B CH#01 Plot 7 Lap Arm Held Position – Ant B CH#06 Plot 8 Lap Arm Held Position – Ant B CH#11 Z-Axis Graphs Z-Axis graphs for Plots 6 to 8 Plot 9 Tablet Position – Ant B – Pre-scan CH#06 Plot 10 Edge On Position – Ant A CH#1 Plot 11 Edge On Position – Ant A CH#6 Plot 12 Edge On Position – Ant A CH#11 Z-Axis Graphs Z-Axis graphs for Plots 10 - 12 Plot 13 Edge On Position – Ant B CH#1 Plot 14 Edge On Position – Ant B CH#6 Plot 15 Edge On Position – Ant B CH#11 Z-Axis Graphs Z-Axis graphs for Plots 13 - 16 WLAN with Bluetooth On Plot 16 Lap Arm…

Text truncated - open the document above for the full version.