EJE-WB0054LifeBook P Series with 4965AGN WLAN + EYSMJCS BT

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX I FUJITSU USER MANUAL User’s Guide Learn how to use your Fujitsu LifeBook P8010 notebook Copyright and Trademark Information Fujitsu Computer Systems Co rporation has made every effort to ensure the accu racy and completeness of this document; however, a s ongoing development efforts are continually im proving the capabilities of our products, we cannot guar antee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. Intel, Intel Core, Centrino, and Intel Centrino Pro are trademarks or registered trademarks of Intel Corporation or its subsidi aries in the United States and other countries.Microsoft, Windows, and Windows Vista are either registered trademarks or tradem arks of Microsoft Corporation in the United States and/or other countries.PCMCIA is a trademark of the Personal Comput er Memory Card Inte rnational Association. EverNote is a registered trad emark of EverNote Corporation. WebCam Companion is a trademark of Ar cSoft, Inc.Roxio is a trademark of Roxio, a division of Sonic Solutions. PowerDVD is a trademar k of CyberLink Corp. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. Google and Picasa are trademarks or regist ered trademarks of Google Incorporated. OmniPass is a trademark of Softex, Inc.Adobe, Acrobat, and Acrobat Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Norton and Norton Internet Security are tradem arks or registered trademarks of Symant ec Corporation in the United States and ot her countries.All other trademarks mentioned herein are the propert y of their respective owners. © Copyright 2008 Fujitsu Computer Syst ems Corporation. All rights reserved. No part of this publication ma y be copied, reproduced, or transl ated, without prior written consen t of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B5FJ-6481-01EN-00 W ARNING H ANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD , A CHEMICAL KNOWN TO THE S TATE OF C ALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM . W ASH HANDS AFTER HANDLING . DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name : Fujitsu Computer Systems Corporation Address: 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Ba se Model Configuration: LifeBook P8010 notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate . Use only UL Listed I.T.E. Class II Adapte rs with an output rating of 16 VDC, with a current of 3.75 A, 60 W.When using your notebook equipment, basic sa fety precautions should always be followed to reduce the risk of fire, electric sho ck and injury to persons, including the following: • Do not use this product near water for exampl e, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or nea r a swimming pool. • Avoid using a modem during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a modem to report a gas le ak in the vicinity of the leak. • Use only the power cord and batteries indica ted in this manual. Do not dispose of ba tteries in a fire. Th ey may explode. Check with local codes for possible special disposal instructions. • To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. • For TV tuner use: To protect from overvolta ges and transients on the Cable Distribution System, make sure that the outer shield of the coaxial cable is connected to earth (gr ounded) at the building premise as close to the point of cable entrance as practicab le, as required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV installation, contact your service provider. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only D ANGER OF EXPLOSION IF L ITHIUM ( CLOCK ) BATTERY IS INCORRECTLY REPLACED . R EPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER . D ISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER ’ S INSTRUCTION . F OR CONTINUED PROTECTION AGAINST RISK OF FIRE , REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE . + AC adapter output polarity: Recycling your battery Over time, the batteries that r un your mobile computer will begin to hold a char ge for a shorter amount of time; this is a natu ral occurrence for all batteries. When this oc curs, you may want to replac e the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain mate rials that could cause envi ronmental damage if dispo sed of improperly. Fujitsu is very concerne d with environmental pr otection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a non- profit public service orga nization dedicated to protecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thous ands of locations throughout the Unit ed States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can al so go to the EIA Consumer Education Init iative website ( http://EIAE.org/ ) and …

Text truncated - open the document above for the full version.

9th January 2008

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EJE-WB0054 Pursuant to FCC DA 04-1705, this application includes a request for Short-term confidentiality for the following exhibits: Exhibit Type File Name External Photos Internal Photos Appendix B1_External Test Sample Photos.pdf Appendix B4_Internal Test Sample Photos.pdf As the above information contains proprietary information which would be a benefit to our competitors, we request that these exhibits be held from public view until 9 th April 2008 (available purchase date). In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Internal Photos Appendix B3_WLAN Location Photos.pdf Operational Description Appendix C_Operational Description.pdf Block Diagram Appendix D_Block Diagram.pdf Schematics Appendix E_Schematics.pdf Operational Description Appendix F_Antenna Details.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, SIGNATURE Name: Tsuyoshi Uchihara Title: Engineer

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au Attachment 2 FCC DOC for LIFEBOOK P SERIES

http://mail.google.com/mail/?ui=1&ik=2a69a1bf8a&view=cv&search=inbox&th=11785b8a312e97de&ww=1259&cvap=4&qt=&zx=7r0eqz-r3vuwt Fujitsu Limited, FCC ID: EJE-WB0054, Assessment NO.: AN08T7482, Notice#1 Inbox Reply from "[email protected]" <[email protected]> hide details Jan 13 (4 days ago) to [email protected] cc [email protected] date Jan 13, 2008 10:29 PM subject Fujitsu Limited, FCC ID: EJE-WB0054, Assessment NO.: AN08T7482, Notice#1 Dear Chieu, The review of the application is complete. PLease reply to the following items relative to the NII part of this application. If you have questions, please ask. Q1: If the NII device operates in MIMO mode(s) in this configuration then combined output power measurement is required. Please refer to pages 128-130 of the original report. Please explain whether the output power measurements on pages 14 &15 of the EMCT report are combined output power for MIMO operation, or if they are measurements performed on a single chain. Also please briefly explain why the output power measurements were repeated, but not other measurements like spectral density, bandwidth, etc. Q2: The powers listed on pages 14 & 15 of the EMCT report appear significantly lower than the powers shown in the original Intel report. Please provide a brief explanation. Q3: Please explain whether the product was operating in MIMO mode during the radiated and conducted spurious emissions modes. Q4: For MIMO operation, please confirm whether MIMO is in 2x2 and 2x3 mode or in 2x2 mode only. Q5: FCC now requires new filings for NII devices to be listed separately for each sub-band. It is understood that this filing is based on a previous application, but since this is in fact a new filing, the frequency listing must be split into two ranges. It appears from output power measurements on page14 & 15 that output power over the full range may comply with the lower power limits for 5150-5250 MHz operation. Please provide revised frequency specifications and confirmation that the product complies with specific limits for each sub-band (5150-5250 and 5250-5350 MHz) including band-edge limits at 5250 MHz. You will also receive separate notices for the two other composite parts. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Tim Dwyer Technical Reviewer Reply Reply to all Forward Invite [email protected] to Gmail Reply from "Rao, Praveen" <[email protected]> hide details Jan 14 (3 days ago) to "Timothy M. Dwyer" <[email protected]> cc [email protected] date Jan 14, 2008 9:18 PM subject RE: Fujitsu Limited, FCC ID: EJE-WB0054, Assessment NO.: AN08T7482, Notice#1 http://mail.google.com/mail/?ui=1&ik=2a69a1bf8a&vie...785b8a312e97de&ww=1259&cvap=4&qt=&zx=7r0eqz-r3vuwt (1 of 7)1/17/2008 10:13:05 AM http://mail.google.com/mail/?ui=1&ik=2a69a1bf8a&view=cv&search=inbox&th=11785b8a312e97de&ww=1259&cvap=4&qt=&zx=7r0eqz-r3vuwt Hi Tim, We are working on the response to your questions. These are new questions that we never had for our previous original applications. The MIMO mode issues we need to check with Intel. Regarding your Q5: "Please provide revised frequency specifications and confirmation that the product complies with specific limits for each sub-band (5150-5250 and 5250-5350 MHz) including band-edge limits at 5250 MHz." As you know this is a new request by FCC during the recent TCBC meeting. This actually raises a problem for 5250 channel. This channel will never pass the band edge test as the BW is 20MHz. Which means 5250 can never be used but still there are tens and thousands of products already approved for this channel and currently being used. In fact a recent grant issued by FCC (refer: 'PY307300070') report 6 for bandedge (attached) where the mid band and high band freq were never tested for bandedge. This request for a C2PC application is a bit harsh (not by you but FCC) and there must be some re-consideration. Otherwise going back to the lab for re-testing and then blocking 5250 is just not realistic ! Please let me know if there is any alternative or have I misunderstood something ? Cheers, Praveen - Show quoted text - This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is confidential to the ordinary user of the email address to which it was addressed and may contain copyright and/or legally privileged information. No one else may read, print, store, copy or forward all or any of it or its attachments. If you receive this email in error, please return to sender. Thank you. If you do not wish to receive commercial email messages from Fujitsu Australia Limited, please email [email protected] Band Edge report - Granted by FCC.pdf 2177K View as HTML Download Reply Reply to all Forward Invite Praveen to Gmail Reply from Tim Dwyer <[email protected]> hide details Jan 14 (3 days ago) to "Rao, Praveen" <[email protected]> cc Mike Kuo <[email protected]> date Jan 14, 2008 9:43 PM subject Re: Fujitsu Limited, FCC ID: EJE-WB0054, Assessment NO.: AN08T7482, Notice#1 mailed-by gmail.com Hi Praveen, As you know, I am only following FCC guidelines as recently re-emphasized. I will discuss more with Mike to see if there is any other consideration. - Show quoted text - Reply Reply to all Forward Reply from Tim Dwyer <[email protected]> hide details Jan 14 (3 days ago) to Mike Kuo <[email protected]> date Jan 14, 2008 10:02 PM http://mail.google.com/mail/?ui=1&ik=2a69a1bf8a&vie...785b8a312e97de&ww=1259&cvap=4&qt=&zx=7r0eqz-r3vuwt (2 of 7)1/17/2008 10:13:05 AM http://mai…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission Attention: Certification Manager No. of pages: 1 From: Donna Lennon Date: 9 th January 2008 EMC Ref: M071118_Cert_4965AGN_NII_BT Subject: FCC APPROVAL – FCC ID: EJE-WB0054 Please receive EMC Technologies’ Report M071118_Cert_4965AGN_NII_BT for review. The EUT is a Fujitsu LifeBook P Series, Model: P8010 with Intel Mini-PCI Wireless LAN Module (Kedron 11a+b/g/n), Model: 4965AGN & TAIYO YUDEN Bluetooth, Model: EYSMJCS. The Intel WLAN module was originally certified by Intel as a modular approval under FCC ID: PD94965AGN (Canada ID: 1000M-4965AGN). The Bluetooth was originally certified by TAIYO YUDEN as a modular approval under FCC ID: RYYEYSMJCS (Canada ID: 4389BEYSMJCS). The intention of this application is to FCC certify Kedron Mini-PCI Wireless LAN Module (11a+b/g/n), Model: 4965AGN & TAIYO YUDEN Bluetooth, Model: EYSMJCS installed in Fujitsu LifeBook P Series, Model: P8010. This is a composite submission. Test results are recorded as follows: NII Submission EMC Technologies Report – M071118_Cert_4965AGN_NII_BT Test results - FCC Part 15.407 (Part E) - (NII results). Documents submitted: Report Number: M071118_Cert_4965AGN_NII_BT & all appendices. Required FCC Forms: Agent Authority, Confidentiality Request and Form 731 authorization. The 802.11a/b/g/n (DTS) sections of the WLAN transmitter & the Bluetooth results are submitted separately under DTS & DSS submissions. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WB0054 Regards ______________ Donna Lennon Report Secretary EMC Technologies Pty Ltd

TCB GRANT OF EQUIPMENT AUTHORIZATION TCB Certification Issued Under the Authority of the Federal Communications Commission By: American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Date of Grant: 04/26/2007 Application Dated: 04/26/2007 Intel Corporation 2111 NE 25th Avenue JF3-302 Hillsboro, OR 97124 Attention: Robert Paxman , Sr. Compliance Engineer NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: PD94965AGN Name of Grantee: Intel Corporation Equipment Class: Unlicensed National Information Infrastructure TX Notes:Intel Wireless WiFi Link 4965AGN Grant Notes FCC Rule Parts Frequency Range (MHZ) Output Watts Frequency Tolerance Emission Designator CC MO15E5180.0 - 5240.0 0.05 CC MO15E5260.0 - 5320.0 0.123 Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. CC: This device is certified pursuant to two different Part 15 rules sections. MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. Page 1 of 1FCC - OET TCB Form 731 Grant of Equipment Authorization 1/18/2008https://gullfoss2.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm?mode=COPY&Request ...

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, Name: Tsuyoshi Uchihara Title: Engineer Date: 9 th January 2008

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX B1 Test Sample External Photographs FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au KEDRON WLAN – 4965AGN

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX H LABELLING DETAILS

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX B4 Test Sample Internal Photographs FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au KEDRON WLAN – 4965AGN

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX G WLAN SPECIFICATIONS Intel® Wireless WiFi Link 4965AGN Product Description: The Intel® Wireless WiFi Link 4965AGN is an embedded 802.11a/b/g/Draft N ф PCIe * Mini Card network adapter card that operates in both the 2.4GHz and 5GHz spectra. This product delivers high throughput and a host of features that enhance today’s mobile lifestyle. Key Features : • Data rates up to 300 Mbps • Intel® Active Management Technology features deliver improved manageability over wireless LAN • IEEE 802.11e QoS with enhancements for VoIP • Wake on WLAN support • Interference Filter enhances performance in congested (noisy) wireless environments • Business Class Wireless Suite* (version 2) offers High Density Network and Enterprise Conferencing Enhancements • IEEE 802.11a/b/g/Draft N ф quad-mode Wireless LAN support (2.4GHz and 5GHz) • Highest industry-standard wireless LAN security support (802.11i, 802.1X, WEP*, WPA*, WPA2*, AES § ) • Cisco Compatible Extensions* v4 support available on certain models. Check with your PC manufacturer • Support for up to 3 antennas allows MIMO diversity for improved wireless throughput at longer range Intel® PROSet/Wireless Software v11.1 Intel ® PROSet/Wireless Software v11.1 is available for users of Intel ® Wireless and Intel ® PRO/Wireless hardware. The latest version of the software helps enable a superior experience via enhancements for end users as well as IT administrators who deploy and manage wireless networks. • Support for Microsoft Windows Vista* operating system • Support for high rate Draft N ф wireless networks • Support for Intel ® Active Management Technology • Support for Business Class Wireless Suite ◊ (v2): − High-Density Networking Enhancements − Enterprise Conferencing Enhancements • Support for Cisco Compatible Extensions* v4 • Support for Wi-Fi* Protected Setup for improved ease of use • Supports the following hardware: − Intel ® Wireless WiFi Link 4965AGN − Intel ® PRO/Wireless 3965ABG Network Connection − Intel ® PRO/Wireless 3945ABG Network Connection − Intel ® PRO/Wireless 2915ABG Network Connection − Intel ® PRO/Wireless 2200BG Network Connection (Note: Some features may only be supported on the latest hardware) Technical Specifications Product Name Intel® Wireless WiFi Link 4965AGN Dimensions (H x W x D) 2.00 in x 1.18 in x 0.13 in (50.95 mm x 30.00 mm x 3.30 mm) Weight 7g Antenna Interface Connector Hirose* U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity support for systems designed with two or three antennas Radio ON/OFF Control o Supported in both hardware and software Connector Interface Mini Card form factor, based on PCIe electrical interface LEDs output Link, Activity Operating Temperature 0 to +80° Celsius Humidity Non-Operating 50% to 90% RH non-condensing (at temperatures of 25°C to 35°C) Operating Systems Microsoft* Windows* Vista 32/64 bit, XP 32/64 bit, 2000, and Linux Wi-Fi Alliance Wi-Fi Certified* for 802.11a, 802.11b, 802.11g, WMM*, WPA*, and WPA2* Microsoft WHQL YES IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Draft N ф IEEE WLAN Standard Architecture Infrastructure or ad hoc (peer-to-peer) Roaming # Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, and 802.11a/b/g/Draft N ф ) Security § Authentication WPA § and WPA2 § , 802.1X (EAP-TLS, TTLS, MD5, PEAP, LEAP, EAP-FAST), EAP-SIM Authentication Protocols PAP, CHAP, MD5, GTC, MS-CHAP*, MS-CHAPv2* Encryption 64-bit and 128-bit WEP, AES-CCMP, CKIP, TKIP Product Safety UL, C-UL, CB (IEC 60590) Products Available Model Code Intel® Wireless WiFi Link 4965AGN 4965AGN 4965AG_ (version with Draft N ф capabilities disabled) Ф “Draft N” refers to: IEEE P802.11n™/D1.0 Draft Amendment to STANDARD [FOR] Information Technology-Telecommunications and information exchange between systems-Local and Metropolitan networks-Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Enhancements for Higher Throughput * Other names and brands may be claimed as the property of others. + W ireless connectivity and some features may require the purchase of additional software, services, or external hardware. Availability of public wireless LAN access points is limited, wireless functionality may vary by country and some hotspots may not support Linux-based Intel Centrino mobile technology systems. System performance measured by MobileMark* 2005. System performance, battery life, wireless performance, and functionality will vary depending on the specific operating system, hardware, and software configurations. See http://www.intel.com/products/centrino/more_info for more information. § Some security solutions, Intel ® PROSet/Wireless Software, and/or Business Class Wireless Suite features may not be supported by your PC’s operating system and/or by your PC manufacturer. Check with your PC manufacturer for details on availability. ◊ Intel ® PROSet/Wireless software may not be supported by your PC manufacturer. Check with your PC manufacturer for details on availability. # Roaming is supported only between each respective band and mode of access points. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including without limitation, liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life savin…

Text truncated - open the document above for the full version.

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071118_Cert_4965AGN_NII_BT APPENDIX A MEASUREMENT INSTRUMENTATION DETAILS EQUIPMENT TYPE MAKE/MODEL SERIAL NUMBER LAST CAL. DD/MM/YY DUE DATE DD/MM/YY CAL. INTERVAL EMI RECEIVER Rohde & Schwarz, Model ESIB40 SN 1088 7490, 20 Hz – 40 GHz 31/05/07 31/05/08 1 YEAR *2 ANTENNAS EMCO 3115 DOUBLE RIDGED HORN 1 - 18 GHz Sn: 8908-3282 24/02/06 24/02/09 3 YEAR *1 EMCO 3116 Double Ridged Guide Horn 18 - 40 GHz Sn: 2276 -------- -------- *3 Narda Standard Gain Horn, M/N: 644 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-03 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-05 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-06 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-07 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-08 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-09 03/12/07 03/12/10 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-10 03/12/07 03/12/10 3 YEAR *1 POWER METER HP 437B 30/05/07 30/05/08 1 YEAR *4 Note *1. In-house calibration. Refer to Quality Manual. Note *2. NATA calibration by Vicom Note *3. Manufacturer’s Calibration Note *4: NATA calibration by Agilent Australia

FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au Attachment 1 RF EXPOSURE INFORMATION FCC ID: EJE-WB0054 (IC: 337J-WB0054) Report No. M071118_Cert_4965AGN_NII_BT _________________________________________________________________ EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au RADIO FREQUENCY EXPOSURE (HAZARD) INFORMATION Testing was performed in accordance with the requirements of FCC Part 15.407(f) Spread spectrum transmitters operating in the 5.150 – 5.350 GHz are required to be operated in a manner that ensures that the public is not exposed to RF energy levels in accordance with CFR 47, Section 1.1307(b)(1). In accordance with this section and also section 2.1093 this device has been defined as a portable device. SAR testing was performed in accordance with OET Bulletin 65 and reported under EMC Technologies reports M071142_Cert_4965AGN_SAR_2.4 and M071142_Cert_4965AGN_SAR_5.6. SAR value is measured low (noise floor) which complies with the FCC human exposure requirements of 47 CFR 2.1093 (d).

FCC ID: EJE-WB0054 IC: 337J-WB0054 EMC Report No. M071142 _CERT_4965AGN _SAR_2.4 Page 1 of 41 EMC Technologies is a NATA Accredited Laboratory complying with the requirements specified in ISO/IEC 17025 and results produced are traceable to national standards of measurement. This document shall not be reproduced, except in full. Nata Accredited Laboratory Number: 5292 SAR Test Report Report Number: M071142_CERT_4965AGN _SAR_2.4 Test Sample: Portable Notebook Computer Radio Modules: WLAN 4965AGN & Bluetooth EYSMJCS Model Number: P8010 Tested For: Fujitsu Australia Pty Ltd FCC ID: EJE-WB0054 IC: 337J-WB0054 Date of Issue: 7 th January 2007 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, …

Text truncated - open the document above for the full version.