EJE-WB0055LifeBook P Series with 4965AG WLAN + EYTF3CSFT BT

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_DTS_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_DTS_BT APPENDIX I FUJITSU USER MANUAL User’s Guide Learn how to use your Fujitsu LifeBook P1620 notebook Copyright and Trademark Information Fujitsu Computer Systems Co rporation has made every effort to ensure the accu racy and completeness of this document; however, a s ongoing development efforts are continually im proving the capabilities of our products, we cannot guar antee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. Intel, Intel Core, Centrino, and Intel Centrino Pro are trademarks or registered trademarks of Intel Corporation or its subsidi aries in the United States and other countries.Microsoft, Windows, Windows Vista, and OneN ote are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.PCMCIA is a trademark of the Personal Comput er Memory Card Inte rnational Association. EverNote is a registered trad emark of EverNote Corporation. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. Google and Picasa are trademarks or regist ered trademarks of Google Incorporated. OmniPass is a trademark of Softex, Inc.Adobe, Acrobat, and Acrobat Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Norton and Norton Internet Security are tradem arks or registered trademarks of Symant ec Corporation in the United States and ot her countries.All other trademarks mentioned herein are the propert y of their respective owners. © Copyright 2007 Fujitsu Computer Syst ems Corporation. All rights reserved. No part of this publication ma y be copied, reproduced, or transl ated, without prior written consen t of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B5FJ-6461-01EN-00 W ARNING H ANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD , A CHEMICAL KNOWN TO THE S TATE OF C ALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM . W ASH HANDS AFTER HANDLING . DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name : Fujitsu Computer Systems Corporation Address: 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Ba se Model Configuration: LifeBook P1620 notebook Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate . Use only UL Listed I.T.E. Class II Adapte rs with an output rating of 16 VDC, with a current of 2.5 A.When using your notebook equipment, basic sa fety precautions should always be followed to reduce the risk of fire, electric sho ck and injury to persons, including the following: • CAUTION - HOT SURFACE: The bottom of this notebook computer can become hot when used for long periods of time. When using this notebook, take caution to limit long te rm or continuous use wh ile resting it on exposed skin, such as the lap. • Do not use this product near water for exampl e, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or nea r a swimming pool. • Avoid using a modem during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a modem to report a gas le ak in the vicinity of the leak. • Use only the power cord and batteries indica ted in this manual. Do not dispose of ba tteries in a fire. Th ey may explode. Check with local codes for possible special disposal instructions. • To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. • For TV tuner use: To protect from overvolta ges and transients on the Cable Distribution System, make sure that the outer shield of the coaxial cable is connected to earth (gr ounded) at the building premise as close to the point of cable entrance as practicab le, as required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV installation, contact your service provider. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only D ANGER OF EXPLOSION IF L ITHIUM ( CLOCK ) BATTERY IS INCORRECTLY REPLACED . R EPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER . D ISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER ’ S INSTRUCTION . F OR CONTINUED PROTECTION AGAINST RISK OF FIRE , REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE . + AC adapter output polarity: Recycling your battery Over time, the batteries that r un your mobile computer will begin to hold a char ge for a shorter amount of time; this is a natu ral occurrence for all batteries. When this oc curs, you may want to replac e the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain mate rials that could cause envi ronmental damage if dispo sed of improperly. Fujitsu is very concerne d with environmental pr otection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a non- profit public service orga nization dedicated to protecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thous ands of locations throughout the Unit ed States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837. If there are no convenient RBRC locations near you, you c…

Text truncated - open the document above for the full version.

9th January 2008

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: EJE-WB0055 Pursuant to FCC DA 04-1705, this application includes a request for Short-term confidentiality for the following exhibits: Exhibit Type File Name External Photos Internal Photos Appendix B1_External Test Sample Photos.pdf Appendix B4_Internal Test Sample Photos.pdf As the above information contains proprietary information which would be a benefit to our competitors, we request that these exhibits be held from public view until 9 th April 2008 (available purchase date). In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Internal Photos Appendix B3_WLAN Location Photos.pdf Operational Description Appendix C_Operational Description.pdf Block Diagram Appendix D_Block Diagram.pdf Schematics Appendix E_Schematics.pdf Operational Description Appendix F_Antenna Details.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, SIGNATURE Name: Tsuyoshi Uchihara Title: Engineer

Fujitsu Limited, FCC ID: EJE-WB0055, Assessment NO.: AN08T7491, Notice#1 Inbox X [email protected] to chieu show details Jan 20 (1 day ago) Reply Hello Chieu, Q1: The FCC "Description of Product to be Marketed" is limited to 50 Characters. The CCS field allows more characters, but the FCC field is limited to 50 characters. Please reply with shortened descriptions for this application and for FCCID: EJE-WB0054. The description fields currently read: FCCID: EJE-WB0054 LifeBook P Series with 4965AGN WLAN and EYSMJCS Bluetooth FCCID: EJE-WB0055 LifeBook P Series with 4965AG and EYTF3CSFT Bluetooth Q2: Please explain if this configuration is operating in MIMO mode. The grant including C2PC on file at FCC for FCCID: PD94965AG makes no reference to MIMO operation or aggregate power, although information in this filing appears to indicate the possibility for MIMO operation. If operating in MIMO mode, please provide aggregate power values for all bands (DTS & NII) and confirm that all tests including SAR were performed in MIMO mode with maximum aggregate power output. Q3: Please confirm that the output power shown on SAR test report page 7 of 63 for Channel 11 (2462 MHz) is a typographical error and revise the report or provide the corrected value by email. Comment: As the above questions apply in general to the composite parts of this application, separate notices will not be sent and your single reply will be attached to each of the composite parts for FCC filing. Q4: With reference to the NII Application AN08T7492 and the Intel letter of Oct 19, 2006, please confirm that the following are the correct values to be listed on the grant for this configuration, with consideration also to item Q2 above. 5180 - 5240 MHz 0.045 W 5260 - 5320 MHz 0.045 W Please note that the evaluation reports for FCCID: EJE-WB0044 have been forwarded for Certifier approval. Once certifier approval is received, the grants will be issued - expected in 24-48 hours. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Tim Dwyer Technical Reviewer Reply Reply to all Forward http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu (1 of 12)1/22/2008 12:51:17 AM http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu from CHIEU <[email protected]. au> reply-to [email protected], to [email protected], date Jan 21, 2008 12:29 AM subject RE: Fujitsu Limited, FCC ID: EJE-WB0055, Assessment NO.: AN08T7491, Notice#1 hide details Jan 21 (1 day ago) Reply Hello Tim, Replies to your questions are below. Regards Chieu Huynh -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, 21 January 2008 3:49 PM To: [email protected] Cc: [email protected] Subject: Fujitsu Limited, FCC ID: EJE-WB0055, Assessment NO.: AN08T7491, Notice#1 Hello Chieu, Q1: The FCC "Description of Product to be Marketed" is limited to 50 Characters. The CCS field allows more characters, but the FCC field is limited to 50 characters. Please reply with shortened descriptions for this application and for FCCID: EJE-WB0054. The description fields currently read: FCCID: EJE-WB0054 LifeBook P Series with 4965AGN WLAN and EYSMJCS Bluetooth FCCID: EJE-WB0055 LifeBook P Series with 4965AG and EYTF3CSFT Bluetooth Answer1: Please update the description to: FCCID: EJE-WB0054 LifeBook P Series with 4965AGN WLAN + EYSMJCS BT FCCID: EJE-WB0055 LifeBook P Series with 4965AG WLAN + EYTF3CSFT BT Q2: Please explain if this configuration is operating in MIMO mode. The grant including C2PC on file at FCC for FCCID: PD94965AG makes no reference to MIMO operation or aggregate power, although information in this filing appears to indicate the possibility for MIMO operation. If operating in MIMO mode, please provide aggregate power values for all bands (DTS & NII) and confirm that all tests including SAR were performed in MIMO mode with maximum aggregate power output. Answer2: There is no MIMO mode for this application. Q3: Please confirm that the output power shown on SAR test report page 7 of 63 for Channel 11 (2462 MHz) is a typographical error and revise the report or provide the corrected value by email. Comment: As the above questions apply in general to the composite parts of this application, separate notices will not be sent and your single reply will be attached to each of the composite parts for FCC filing. Answer3: Yes, it is a typo. The correct power should read 15.7 dBm. Q4: With reference to the NII Application AN08T7492 and the Intel letter of http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu (2 of 12)1/22/2008 12:51:17 AM http://mail.google.com/mail/?ui=2&view=bsp&ver=ymdfwq781tpu Oct 19, 2006, please confirm that the following are the correct values to be listed on the grant for this configuration, with consideration also to item Q2 above. 5180 - 5240 MHz 0.045 W 5260 - 5320 MHz 0.045 W Answer4: Powers to be listed for Fujitsu are same as Intel grant (FCC ID: PD94965AG). 5180 - 5240 MHz 0.049 W 5260 - 5320 MHz 0.087 W - Show quoted text - Reply Reply to all Forward from Tim Dwyer <Timothy_Dwyer@ieee. org> to [email protected], date Jan 21, 2008 1:34 AM subject Re: Fujitsu Limited, FCC ID: EJE-WB0055, Assessment NO.: AN08T7491, Notice#1 mailed-by gmail.com hide details 1:34 AM (23 hours ago) Reply Hello Chieu, Thanks for your quick reply. Answers to Q1-Q3 are ok. For Q4, some additional explanation is needed since the maximum reported power in the EMC (p 13/16) and SAR (p 7/74)reports at 52…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission Attention: Certification Manager No. of pages: 1 From: Donna Lennon Date: 9 th January 2008 EMC Ref: M071119_Cert_4965AG_NII_BT Subject: FCC APPROVAL – FCC ID: EJE-WB0055 Please receive EMC Technologies’ Report M071119_Cert_4965AG_NII_BT for review. The EUT is a Fujitsu LifeBook P Series, Model: P1620 with Intel Mini-PCI Wireless LAN Module (Kedron 11a+b/g), Model: 4965AG & TAIYO YUDEN Bluetooth, Model: EYTF3CSFT. The Intel WLAN module was originally certified by Intel as a modular approval under FCC ID: PD94965AGN (Canada ID: 1000M-4965AGN). The Bluetooth was originally certified by TAIYO YUDEN as a modular approval under FCC ID: RYYEYTF3CSFT (Canada ID: 4389AEYTF3CSFT). The intention of this application is to FCC certify Kedron Mini-PCI Wireless LAN Module (11a+b/g), Model: 4965AG & TAIYO YUDEN Bluetooth, Model: EYTF3CSFT installed in Fujitsu LifeBook P Series, Model: P1620. This is a composite submission. Test results are recorded as follows: NII Submission EMC Technologies Report – M071119_Cert_4965AG_NII_BT Test results - FCC Part 15.407 (Part E) - (NII results). Documents submitted: Report Number: M071119_Cert_4965AG_NII_BT & all appendices. Required FCC Forms: Agent Authority, Confidentiality Request and Form 731 authorization. The 802.11a/b/g (DTS) sections of the WLAN transmitter & the Bluetooth results are submitted separately under DTS & DSS submissions. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WB0055 Regards ______________ Donna Lennon Report Secretary EMC Technologies Pty Ltd

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, Name: Tsuyoshi Uchihara Title: Engineer Date: 9 th January 2008

TCB GRANT OF EQUIPMENT AUTHORIZATION TCB Certification Issued Under the Authority of the Federal Communications Commission By: American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 Date of Grant: 04/26/2007 Application Dated: 04/26/2007 Intel Corporation 2111 NE 25th Avenue JF3-302 Hillsboro, OR 97124 Attention: Robert Paxman , Sr. Compliance Engineer NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: PD94965AGN Name of Grantee: Intel Corporation Equipment Class: Unlicensed National Information Infrastructure TX Notes:Intel Wireless WiFi Link 4965AGN Grant Notes FCC Rule Parts Frequency Range (MHZ) Output Watts Frequency Tolerance Emission Designator CC MO15E5180.0 - 5240.0 0.05 CC MO15E5260.0 - 5320.0 0.123 Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. CC: This device is certified pursuant to two different Part 15 rules sections. MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. Page 1 of 1FCC - OET TCB Form 731 Grant of Equipment Authorization 1/18/2008https://gullfoss2.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm?mode=COPY&Request ...

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au Attachment 2 FCC DOC for LIFEBOOK P SERIES

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_NII_BT APPENDIX B1 Test Sample External Photographs FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au KEDRON WLAN – 4965AG

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_NII_BT APPENDIX H LABELLING DETAILS

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_NII_BT APPENDIX B4 Test Sample Internal Photographs FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au KEDRON WLAN – 4965AG

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_NII_BT APPENDIX G WLAN SPECIFICATIONS Intel® Wireless WiFi Link 4965AGN Product Description: The Intel® Wireless WiFi Link 4965AGN is an embedded 802.11a/b/g/Draft N ф PCIe * Mini Card network adapter card that operates in both the 2.4GHz and 5GHz spectra. This product delivers high throughput and a host of features that enhance today’s mobile lifestyle. Key Features : • Data rates up to 300 Mbps • Intel® Active Management Technology features deliver improved manageability over wireless LAN • IEEE 802.11e QoS with enhancements for VoIP • Wake on WLAN support • Interference Filter enhances performance in congested (noisy) wireless environments • Business Class Wireless Suite* (version 2) offers High Density Network and Enterprise Conferencing Enhancements • IEEE 802.11a/b/g/Draft N ф quad-mode Wireless LAN support (2.4GHz and 5GHz) • Highest industry-standard wireless LAN security support (802.11i, 802.1X, WEP*, WPA*, WPA2*, AES § ) • Cisco Compatible Extensions* v4 support available on certain models. Check with your PC manufacturer • Support for up to 3 antennas allows MIMO diversity for improved wireless throughput at longer range Intel® PROSet/Wireless Software v11.1 Intel ® PROSet/Wireless Software v11.1 is available for users of Intel ® Wireless and Intel ® PRO/Wireless hardware. The latest version of the software helps enable a superior experience via enhancements for end users as well as IT administrators who deploy and manage wireless networks. • Support for Microsoft Windows Vista* operating system • Support for high rate Draft N ф wireless networks • Support for Intel ® Active Management Technology • Support for Business Class Wireless Suite ◊ (v2): − High-Density Networking Enhancements − Enterprise Conferencing Enhancements • Support for Cisco Compatible Extensions* v4 • Support for Wi-Fi* Protected Setup for improved ease of use • Supports the following hardware: − Intel ® Wireless WiFi Link 4965AGN − Intel ® PRO/Wireless 3965ABG Network Connection − Intel ® PRO/Wireless 3945ABG Network Connection − Intel ® PRO/Wireless 2915ABG Network Connection − Intel ® PRO/Wireless 2200BG Network Connection (Note: Some features may only be supported on the latest hardware) Technical Specifications Product Name Intel® Wireless WiFi Link 4965AGN Dimensions (H x W x D) 2.00 in x 1.18 in x 0.13 in (50.95 mm x 30.00 mm x 3.30 mm) Weight 7g Antenna Interface Connector Hirose* U.FL-R-SMT mates with cable connector U.FL-LP-066 Antenna Diversity On-board diversity support for systems designed with two or three antennas Radio ON/OFF Control o Supported in both hardware and software Connector Interface Mini Card form factor, based on PCIe electrical interface LEDs output Link, Activity Operating Temperature 0 to +80° Celsius Humidity Non-Operating 50% to 90% RH non-condensing (at temperatures of 25°C to 35°C) Operating Systems Microsoft* Windows* Vista 32/64 bit, XP 32/64 bit, 2000, and Linux Wi-Fi Alliance Wi-Fi Certified* for 802.11a, 802.11b, 802.11g, WMM*, WPA*, and WPA2* Microsoft WHQL YES IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, Draft N ф IEEE WLAN Standard Architecture Infrastructure or ad hoc (peer-to-peer) Roaming # Supports seamless roaming between respective access points (802.11b, 802.11g, 802.11a/b/g, and 802.11a/b/g/Draft N ф ) Security § Authentication WPA § and WPA2 § , 802.1X (EAP-TLS, TTLS, MD5, PEAP, LEAP, EAP-FAST), EAP-SIM Authentication Protocols PAP, CHAP, MD5, GTC, MS-CHAP*, MS-CHAPv2* Encryption 64-bit and 128-bit WEP, AES-CCMP, CKIP, TKIP Product Safety UL, C-UL, CB (IEC 60590) Products Available Model Code Intel® Wireless WiFi Link 4965AGN 4965AGN 4965AG_ (version with Draft N ф capabilities disabled) Ф “Draft N” refers to: IEEE P802.11n™/D1.0 Draft Amendment to STANDARD [FOR] Information Technology-Telecommunications and information exchange between systems-Local and Metropolitan networks-Specific requirements-Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Enhancements for Higher Throughput * Other names and brands may be claimed as the property of others. + W ireless connectivity and some features may require the purchase of additional software, services, or external hardware. Availability of public wireless LAN access points is limited, wireless functionality may vary by country and some hotspots may not support Linux-based Intel Centrino mobile technology systems. System performance measured by MobileMark* 2005. System performance, battery life, wireless performance, and functionality will vary depending on the specific operating system, hardware, and software configurations. See http://www.intel.com/products/centrino/more_info for more information. § Some security solutions, Intel ® PROSet/Wireless Software, and/or Business Class Wireless Suite features may not be supported by your PC’s operating system and/or by your PC manufacturer. Check with your PC manufacturer for details on availability. ◊ Intel ® PROSet/Wireless software may not be supported by your PC manufacturer. Check with your PC manufacturer for details on availability. # Roaming is supported only between each respective band and mode of access points. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including without limitation, liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving,…

Text truncated - open the document above for the full version.

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park VIC 3042 Australia www.emctech.com.au EMC Technologies Report Number: M071119_Cert_4965AG_NII_BT APPENDIX A MEASUREMENT INSTRUMENTATION DETAILS EQUIPMENT TYPE MAKE/MODEL SERIAL NUMBER LAST CAL. DD/MM/YY DUE DATE DD/MM/YY CAL. INTERVAL EMI RECEIVER Rohde & Schwarz, Model ESIB40 SN 1088 7490, 20 Hz – 40 GHz 31/05/07 31/05/08 1 YEAR *2 ANTENNAS EMCO 3115 DOUBLE RIDGED HORN 1 - 18 GHz Sn: 8908-3282 24/02/06 24/02/09 3 YEAR *1 EMCO 3116 Double Ridged Guide Horn 18 - 40 GHz Sn: 2276 -------- -------- *3 Narda Standard Gain Horn, M/N: 644 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-03 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-05 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-06 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-07 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-08 27/11/06 27/11/09 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-09 03/12/07 03/12/10 3 YEAR *1 ETS Standard Gain Horn, M/N: 3160-10 03/12/07 03/12/10 3 YEAR *1 POWER METER HP 437B 30/05/07 30/05/08 1 YEAR *4 Note *1. In-house calibration. Refer to Quality Manual. Note *2. NATA calibration by Vicom Note *3. Manufacturer’s Calibration Note *4: NATA calibration by Agilent Australia

FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au Attachment 1 RF EXPOSURE INFORMATION FCC ID: EJE-WB0055 (IC: 337J-WB0055) Report No. M071119_Cert_4965AG_NII_BT _________________________________________________________________ EMC Technologies Pty Ltd – 176 Harrick Road, Keilor Park, VIC 3042 Australia www.emctech.com.au RADIO FREQUENCY EXPOSURE (HAZARD) INFORMATION Testing was performed in accordance with the requirements of FCC Part 15.407(f) Spread spectrum transmitters operating in the 5.150 – 5.350 GHz are required to be operated in a manner that ensures that the public is not exposed to RF energy levels in accordance with CFR 47, Section 1.1307(b)(1). In accordance with this section and also section 2.1093 this device has been defined as a portable device. SAR testing was performed in accordance with OET Bulletin 65 and reported under EMC Technologies reports M071143_Cert_4965AG_SAR_2.4 and M071143_Cert_4965AG_SAR_5.6. Highest SAR value measured 0.842 mW/g, which complied with the FCC human exposure requirements of 47 CFR 2.1093 (d).

FCC ID: EJE-WB0055 IC: 337J-WB0055 EMC Report No. M071143_CERT_4965AG _SAR_2.4 Page 46 of 74 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au Test Date: 08 January 2008 File Name: Edge On OFDM 5.77 GHz Antenna B Far Side Bluetooth Off Prescan 08-01-08.da4 DUT: Fujitsu Tablet Ryuga with Kedron 11abg and Bluetooth; Type: 4965 AG; Serial: MAC: 0013E805C841 * Communication System: OFDM 5770 MHz; Frequency: 5785 MHz; Duty Cycle: 1:1 * Medium parameters used: σ = 6.50586 mho/m, ε r = 46.4323; ρ = 1000 kg/m 3 - Electronics: DAE3 Sn359; Probe: EX3DV4 - SN3563; ConvF(3.72, 3.72, 3.72) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Channel 157 Test/Area Scan (51x181x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.062 mW/g 0 dB = 0.027mW/g SAR MEASUREMENT PLOT 12 Ambient Temperature 21…

Text truncated - open the document above for the full version.