EJE-WB0080LIFEBOOK T SERIES WITH 622ANHMW & BT

 User’s Guide Learn how to use your Fujitsu LifeBook T900 Tablet PC Copyright and Trademark Information Fujitsu America, Inc. has made every effort to ensure the accuracy and comp leteness of this document; however, as ongoing devel opment efforts are continually improving th e capabilities of our pr oducts, we cannot guarant ee the accuracy of the contents of this do cument. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited. Intel, Intel Core, Centrino, and Intel Centrino Pro are trademarks or registered trademarks of Intel Corporation or its subsidi aries in  the United States and other countries.Microsoft, Windows, Windows Vista, and OneN ote are either registered trademarks or trademarks of Microsoft Corporation in the  United States and/or other countries.PCMCIA is a trademark of the Personal Comput er Memory Card Inte rnational Association. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a trademark of Softex, Inc.PowerDirector, PowerDVD, MakeDisc, and Y ouCam are trademarks of CyberLink Corp. Roxio is a trademark of Sonic Solutions.Wacom is a registered trademark of Wacom Company Limited.Adobe, Acrobat, and Acrobat Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.Norton and Norton Internet Security are tradem arks or registered trademarks of Symant ec Corporation in the United States and ot her countries.All other trademarks mentioned herein are the propert y of their respective owners. © Copyright 2009 Fujitsu America, In corporated. All rights reserved. No part of this publication may be copied, reproduced, or transl ated, without prior written consen t of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B6FJ-3801-01ENZ0-00 W ARNING H ANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD , A CHEMICAL KNOWN TO THE S TATE OF C ALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM . W ASH HANDS AFTER HANDLING . DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujit su America, Incorporated Address: 1250 E. Arques Avenue, Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Ba se Model Configuration: LifeBook T900 Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:  (1) This device may not cau se harmful interferenc e, (2) This device must acce pt any interference received,  including interference that may cause undesired operation. IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current of 4.22 A (80 W).When using your notebook equipment, basic safety precautions should al ways be followed to reduce the risk of fire, electric sho ck and injury to persons, including the following: • CAUTION - HOT SURFACE: The bottom of this notebook computer can become hot when used for long peri ods of time. When using this notebook, take caution to limit long term or continuous use while resting it on exposed skin, such as the lap. • Do not use this product near water for exam ple, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or nea r a swimming pool. • Avoid using a modem during an electrical storm. There may be a remote risk of electric shock from lightning. • Do not use a modem to report a gas le ak in the vicinity of the leak. • Use only the power cord and batter ies indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. • To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord. • For TV tuner use: To protect from overvolta ges and transients on the Cable Distribution System, make sure that the outer shield of the coaxial cable is connected to earth (grounded) at the building premise as close to the point of cable entrance as practicable, as required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV inst allation, contact your service provider. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only D ANGER OF EXPLOSION IF L ITHIUM ( CLOCK ) BATTERY IS INCORRECTLY REPLACED . R EPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER . D ISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER ’ S INSTRUCTION . F OR CONTINUED PROTECTION AGAINST RISK OF FIRE , REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE . + AC adapter output polarity: Recycling your battery Over time, the batteries that r un your mobile computer will begin to hold a char ge for a shorter amount of time; this is a natu ral occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environm ental damage if disposed of improperly. Fujitsu is very concerne d with environmental pr otection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a non-profit public service organization dedicated to pr otecting our environment by recycling old batteries at no cost to you.RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location nearest you, go to www.RBRC.org or call 1-800-822-8837.  If there are no convenient RBRC locations near you, you can al so go to the EIA Consumer E ducation Initia tive website ( http://EIAE.org/ ) and search for a convenient disposal location.Remember – protecting the environm ent is a cooperative effort, and you should make every effort to protect it for current …

Text truncated - open the document above for the full version.

Intel Corporation 100 Center Point Circle Columbia, SC 29210 September 9, 2009 American TCB 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Subject: FCC ID: PD9622ANH Gentlemen: Please be advised that the Company FCC ID: PD9622ANH, Trade name, Model 622ANHMW is manufactured for the global market but when labeled for marketing in North America (FCC ID: PD9622ANH) the Trade name, Model 622ANHMW EEPROM will be programmed at the factory to only operate and actively scan on these specific channels: Channels 1-11, 2412-2462MHz 802.11b mode Channels 1-11, 2412-2462MHz 802.11g mode Channels 1-11, 2412-2462MHz 802.11n mode (20MHz channel) Channels 3-9, 2422-2452MHz 802.11n mode (40MHz channel) The following channels will be programmed at the factory to passively scan and will only listen and cannot send a probe request to initiate communication on these specific channels. Ad-hoc mode is always disabled on these passive channels. Channels 12 &13, 2467 & 2472MHz 802.11b mode Channels 12 &13, 2467 & 2472MHz 802.11g mode Channels 12 &13, 2467 & 2472MHz 802.11n mode (20/40MHz channel) This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. If you have any questions please do not hesitate to contact us at 803-216-2344. Sincerely, ______________________________ Steven C. Hackett Wireless Regulatory Engineer Intel Corporation

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 27 th November 2009 EMC Ref: M091068_ Cert_622ANHMW_NII_BT Subject: FCC APPROVAL – FCC ID: EJE-WB0080 Please receive EMC Technologies’ Report M091068_Cert_622ANHMW_NII_BT for review. The EUT is a Fujitsu LifeBook T Series, Model: T900 / TH900 with Intel Centrino Advanced-N 6200 (Puma Peak 802.11a/b/g/n 2x2), Model: 622ANHMW & Taiyo Yuden Bluetooth Module, Model: EYSMJCS. The Intel WLAN module was originally certified by Intel Corporation, as a modular approval under FCC ID: PD9622ANH (Canada ID: 1000M-622ANH). The Bluetooth module was originally certified by Taiyo yuden as a modular approval under FCC ID: RYYEYSMJCS (Canada ID: 4389B-EYSMJCS). The intention of this application is to FCC certify Intel Centrino Advanced-N 6200 (Puma Peak 802.11a/b/g/n 2x2), Model: 622ANHMW & Taiyo Yuden Bluetooth Module, Model: EYSMJCS installed in Fujitsu LifeBook T Series, Model: T900 / TH900. NII Documents submitted: Test Reports: SAR and EMC Appendixes: Measurement Instrumentations, Photographs, Operational Description, Block Diagram, Antenna Details, Schematics, Labelling Details and User Manual Attachments: RF Exposure Information, FCC DOC, Intel FCC 15.407 and Intel FCC 15.407 DFS Reports. FCC Forms: Confidentiality Letter and Form 731 Signatory & Agent Authorization Letter This is a composite submission. The DTS (WLAN) and DSS (Bluetooth) are submitted separately under DTS and DSS submissions. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WB0080 Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: (EJE-WB0080). Pursuant to FCC DA 04-1705, this application includes a request for short term confidentiality for the following exhibits: Internal Photos Location Photos External Photos Test Setup Photos User Manual As the above information contains proprietary information which would be benefit to our competitors, we request that these exhibits be held from public view for 180 days from the issue date of the grant of approval. In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Operational Description Block Diagram Schematics Antenna Details The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________________ Tsuyoshi Uchihara Title : Engineer Date: 4 th September 2009

Tim Dwyer <[email protected]> 3 messages [email protected] <[email protected]>Wed, Dec 16, 2009 at 10:30 PM To: [email protected], [email protected] Cc: [email protected] Hello Chieu, This is a consolidated review notice for applications AN09T9887 (DTS) , AN09T9888 (NII) , and AN09T9889 (DSS). Replies will be applied to each application as applicable. Q1: DTS & NII Block diagram shows 2x2 MIMO configuration. Operation description describes a device with 3x3 MIMO capability. WLAN antenna exhibit indicates 3 Transmit antennas (TX1, TX2, and TX3/RX3) antennas. Please confirm that this application is for a 2x2 MIMO configuration and provide a brief explanation for the inconsistency in the documentation. Q2: DTS & NII WLAN antenna exhibit co-location drawing shows WAN antennas. WAN has not otherwise been addressed in this application. Please explain. Q3: DTS NII DSS. Tablet computers are devices that may be held in the hand and so according to ANSI C63.4:2003 must be tested in 3 orthogonal planes (axes) for radiated emissions. Please confirm that this was done. Q4: For information purposes, please see the FCC Public Notice regarding acceptance of ANSI C63.10:2009 and ANSI C63.4:2009 at http://hraunfoss.fcc.gov/ edocs_public/attachmatch/DA-09-2478A1.pdf Q5: DTS NII DSS Since this is an original filing for this configuration, conducted emissions measurements to demonstrate compliance with 15.207 are required. The emissions test report refers to the DoC exhibit, which states compliance but does not include test data. It is noted that conducted emissions measurements were reported in the FCCID: PD9622ANH modular application. However, since the current filing is not based on modular approval guidelines, conducted emissions for the configuration of the current filing is required within the application. If compliance with the 15.207 conducted emissions requirements is demonstrated by the DoC test report, please provide a copy of that report. Q6: DTS NII The cover pages of test reports: M091069_Cert_622ANHMW_SAR_2.4_BT and M091069_Cert_622ANHMW_SAR_5.6_BT show the issue date of 27 November 2006. This appears to be a typographical error. Please confirm. Q7: DSS No test report for the BT device was included. Please provide this exhibit. Q8: DSS Confidential exhibits Block Diagram, Operation Description, Antenna Description, and Schematic exhibits were not uploaded. The exhibits are referenced in the confidentiality request. Please provide these exhibits. Q9: DSS Short term confidential exhibits Internal Photos, External Photos, Test Setup Photos, were not uploaded. Please provide these exhibits for the DSS application. Q10. NII Please provide an attestation statement exhibit verifying that the device operates as a client only and that it does not have Ad Hoc capabilities on non-US frequencies and on DFS frequencies. In addition, the related IC applications will require an additional statement confirming that the device does on operate on channels with emissions in the 5600-5650 MHz band. If both statements are included and the attestation letter is addressed to both FCC and IC, it may be used for both applications. Reference to multiple FCCID and IC ID's should be included as applicable The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Tim Dwyer Technical Reviewer CHIEU <[email protected]>Fri, Dec 18, 2009 at 12:06 AM Reply-To: [email protected] To: [email protected], [email protected] Hello Tim, Please find answers below. Regards Chieu Huynh -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, 17 December 2009 2:30 PM To: [email protected] ; [email protected] Cc: [email protected] Subject: Fujitsu Limited, FCC ID: EJE-WB0080, Assessment NO.: AN09T9887 AN09T9888 AN09T9889, Notice#1 Hello Chieu, This is a consolidated review notice for applications AN09T9887 (DTS) , AN09T9888 (NII) , and AN09T9889 (DSS). Replies will be applied to each application as applicable. Q1: DTS & NII Block diagram shows 2x2 MIMO configuration. Operation description describes a device with 3x3 MIMO capability. WLAN antenna exhibit indicates 3 Transmit antennas (TX1, TX2, and TX3/RX3) antennas. Please confirm that this application is for a 2x2 MIMO configuration and provide a brief explanation for the inconsistency in the documentation. A1: Operational Description supplied is common document for 2x2 MIMO and 3x3 MIMO configurations. However, this application is for 2x2 MIMO configuration only. Therefore, only 2x2 MIMO specification/information is relevant to this application. Same applied for antenna document, only Tx1 and Tx2 antenna data is relevant for this application. Tx3 antenna will never be used Q2: DTS & NII WLAN antenna exhibit co-location drawing shows WAN antennas. WAN has not otherwise been addressed in this application. Please explain. A2: There is NO WAN or WAN antennas in this device. The Antenna document supplied is common document for many notebook models. Please ignore the mention of WAN in this document. Q3: DTS NII DSS. Tablet computers are devices that may be held in the hand and so according to ANSI C63.4:2003 must be tested in 3 orthogonal planes (axes) for radiated emissions. Please confirm that this was done. A3: Yes, all orientations (3 orthogonal planes) were investigated and tested (refer to section 4.3 of the test report). Worst results were reported. Q4: For information purposes, please see the FCC Public Notice regarding acceptance of ANSI C63.10:2009 and ANSI C63…

Text truncated - open the document above for the full version.

FCC ID: EJE-WB0080 (IC: 337J-WB0080) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B3 LOCATION PHOTOS Antenna Locations WLAN Location

FCC ID: EJE-WB0080 (IC: 337J-WB0080) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS FCC ID: EJE-WB0080 (IC: 337J-WB0080) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS

FCC ID: EJE-WB0080 (IC: 337J-WB0080) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au Attachment 1 RF EXPOSURE INFORMATION RADIO FREQUENCY EXPOSURE (HAZARD) INFORMATION Testing was performed in accordance with the requirements of FCC Part 15.407(f) Spread spectrum transmitters operating in the 5.15 – 5.35 GHz and 5.47 – 5.725 GHz are required to be operated in a manner that ensures that the public is not exposed to RF energy levels in accordance with CFR 47, Section 1.1307(b)(1). In accordance with this section and also section 2.1093 this device has been defined as a portable device. Intel 622ANHMW WLAN - SAR testing was performed in accordance with OET Bulletin 65 and reported under EMC Technologies reports M091069_Cert_622ANHMW_SAR_2.4_BT (2.4 GHz) and M091069_Cert_622ANHMW_SAR_5.6_BT (5.18 – 5.825 GHz). SAR values of 0.182 mW/g (DTS) and 0.068 mW/g (NII) were measured which complied with the FCC human exposure requirements of 47 CFR 2.1093 (d). Taiyo Yuden EYSMJCS Bluetooth (FCC ID: RYYEYSMJCS) - SAR measurements were not required because the Bluetooth transmit power is very low and Bluetooth antenna is located at more than 5cm away from the other transmitting antennas.

PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 30 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. The spatial peak SAR values were assessed with the procedure described in this report. Table: 5200 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Primary Portrait 1 B 6 - 52 Table: 5600 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel 2 A 6 - 120 Primary Portrait 3 B 6 - 120 Tablet 4 B 6 - 120 Table: 5800 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel 5 A 6 - 157 6 B 6 - 157 7 B HT0 20 157 Primary Portrait 8 B HT0 40 159 Tablet 9 B 6 - 157 Table: Validation Plots Plot 10 Validation 5200 MHz 6 th November 2009 Plot 11 Validation 5500 MHz 5 th November 2009 Plot 12 Validation 5800 MHz 4 th November 2009 PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 31 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au Test Date: 6 November 2009 File Name: M091069 Edge On Primary Portrait OFDM 5200 MHz Antenna B (2) 06-11-09.da4 DUT: Fujitsu Tablet Souther with Puma 11abgn and Bluetooth; Type: 622ANHMW; Serial: MAC: 0015005BE890 * Communication System: OFDM 5250 MHz; Frequency: 5260 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 5256 MHz; σ = 5.37 mho/m; ε r = 47.6; ρ = 1000 kg/m 3 - Electronics: DAE3 Sn442; Probe: EX3DV4 - SN3563; ConvF(3.92, 3.92, 3.92) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Channel 052 Test/Area Scan (101x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.095 mW/g Channel 052 Test/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 2.93 V/m; Power Drift = 0.261 dB Peak SAR (extrapolated) = 0.175 W/kg SAR(1 g) = 0.044 mW/g; SAR(10 g) = 0.022 mW/g Maximum value of SAR (measured) = 0.096 mW/g 0 dB = 0.096mW/g SAR MEASUREMENT PLOT 1 Ambient Temperature 21.9 Degrees Celsius Liquid Temperature 21.5 Degrees Celsius Humidity 41.0 % PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 32 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 33 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au Test Date: 5 November 2009 File Name: M091069 Edge On Primary Portrait OFDM 5600 MHz Antenna A (1) 05-11-09.da4 DUT: Fujitsu Tablet Souther with Puma 11abgn and Bluetooth; Type: 622ANHMW; Serial: MAC: 0015005BE890 * Communication System: OFDM 5600 MHz; Frequency: 5600 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 5600 MHz; σ = 5.89 mho/m; ε r = 45.9; ρ = 1000 kg/m 3 - Electronics: DAE3 Sn442; Probe: EX3DV4 - SN3563; ConvF(3.36, 3.36, 3.36) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Channel 120 Test/Area Scan (101x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.053 mW/g Channel 120 Test/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 1.02 V/m; Power Drift = 0.378 dB Peak SAR (extrapolated) = 0.127 W/kg SAR(1 g) = 0.017 mW/g; SAR(10 g) = 0.00302 mW/g Maximum value of SAR (measured) = 0.047 mW/g 0 dB = 0.047mW/g SAR MEASUREMENT PLOT 2 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature 20.8 Degrees Celsius Humidity 43.0 % PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 34 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 35 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au Test Date: 5 November 2009 File Name: M091069 Edge On Primary Portrait OFDM 5600 MHz Antenna B (2) 05-11-09.da4 DUT: Fujitsu Tablet Souther with Puma 11abgn and Bluetooth; Type: 622ANHMW; Serial: MAC: 0015005BE890 * Communication System: OFDM 5600 MHz; Frequency: 5600 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 5600 MHz; σ = 5.89 mho/m; ε r = 45.9; ρ = 1000 kg/m 3 - Electronics: DAE3 Sn442; Probe: EX3DV4 - SN3563; ConvF(3.36, 3.36, 3.36) - Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Channel 120 Test/Area Scan (101x141x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.189 mW/g Channel 120 Test/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 4.20 V/m; Power Drift = 0.028 dB Peak SAR (extrapolated) = 0.260 W/kg SAR(1 g) = 0.068 mW/g; SAR(10 g) = 0.033 mW/g Maximum value of SAR (measured) = 0.135 mW/g 0 dB = 0.135mW/g SAR MEASUREMENT PLOT 3 Ambient Temperature 21.0 Degrees Celsius Liquid Temperature…

Text truncated - open the document above for the full version.

PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 55 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au APPENDIX C CALIBRATION DOCUMENTS 1. EX3DV4 (SN: 3563) Probe Calibration Certificate 2. D5GHzV2 (SN: 1008) Dipole Calibration Certificate PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 56 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 57 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 58 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 59 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 60 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 61 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 62 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 63 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 64 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 65 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 66 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 67 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 68 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No. M091069_CERT_622ANHMW_SAR_5.6_BT Page 69 of 72 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au PC System - FCC ID: EJE-WB0080 IC: 337J-WB0080 Report No.…

Text truncated - open the document above for the full version.