EJE-WB0096Fujitsu LifeBook T Series T936 with Intel 8260NGW

Operating Manual FUJITSU LIFEBOOK T936 System B5FK-5501-01ENZ0-00 Contact address in North America FUJITSU AMERICA INC. 1250 East Arques Avenue, Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 "http://solutions.us.fujitsu.com" "http://solutions.us.fujitsu.com/contact" Have a question? Email us at: "[email protected]" Copyright © 2015 Fujitsu America, Inc.. All rights reserved FUJITSU LIFEBOOK T936 Declarations of conformity 97 FCC and IC Regulatory Information 98 Appendix 102 Index 118 Operating Manual Declaration of conformity Fujitsu Contact Information Notational conventions Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes 7 8 9 10 13 18 22 64 72 77 78 81 89 94 Copyright and Trademark Information Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes. Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. The ExpressCard word mark and logo are owned by the Personal Computer Memory Card International Association (PCMCIA) and any use of such marks by Fujitsu America, Incorporated is under license. Google is a trademark or registered trademark of Google Incorporated. Bluetooth is a trademark of Bluetooth SIG, Inc., USA. OmniPass is a t rademark of Softex, Inc. Roxio is a trademark of Roxio, a division of Sonic Solutions. PowerDirector, PowerDVD, Y ouCam, and MakeDisc are trademarks of CyberLink Corp. Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. The DVD player found in some models of the LIFEBOOK notebook incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights users. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. All other trademarks specified here are the property of their respective owners. Contents Contents Declaration of conformity ........................................................................................................................... 7 Fujitsu Contact Information ........................................................................................................................ 8 Notational conventions ................................................................................................................................ 9 Ports and controls ...................................................................................................................................... 10 Important notes ........................................................................................................................................... 13 Safety instructions ......................................................................................................................................... 13 Additional safety notes for devices with radio components ..................................................................... 14 Energy saving ................................................................................................................................................ 14 Energy saving under Windows ............................................................................................................. 14 Traveling with your notebook ....................................................................................................................... 15 Before you travel .................................................................................................................................... 15 Transporting the notebook .................................................................................................................... 16 Storing the notebook ..................................................................................................................................... 16 Cleaning the notebook.................................................................................................................................. 17 Further information on cleaning the notebook.................................................................................... 17 First-time setup of your device ................................................................................................................ 18 Unpacking and checking the device ........................................................................................................... 18 Choose a location ......................................................................................................................................... 19 Connecting the AC adapter ......................................................................................................................... 19 Switching on the device for the first time ...........................................................................…

Text truncated - open the document above for the full version.

Fujitsu Limited 1- 1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel: +81-44-754-3885 ; Fax: +81-44-754-3769 Date: September 1, 2015 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC Application for FCC ID: EJE-WB0096 To Whom It May Concern: We, Fujitsu Limited, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite filing. Sincerely yours, Tsuyoshi Uchihara [email protected]

Fujitsu Limited 1- 1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel: +81-44-754-3885 ; Fax: +81-44-754-3769 Date: September 2, 2015 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: This device with FCC ID: EJE-WB0096 integrates a WLAN/BT module 8260NGW Brand Name FCC ID Intel PD98260NG No hardware design changes are made on the module, and the software has not been changed to increase the RF output power of the modules. Pursuant to KDB 996369 D01v01r03, the original modular reports (report numbers: 1540055R-RFUSP01V00 / 1540055R-RFUSP01V00-A / 1540055R-RFUSP01V00-B / 1540055R-RFUSP05V00 / 1540055R-RFUSP05V00-A) are submitted to represent the compliance regarding Part15C/Part15E conducted RF testing items of the host device. The 15C/Part15E radiated RF testing items are tested on this host device, and the test reports are submitted additionally. Should you have any comments or questions, please feel free to contact me. Sincerely, Tsuyoshi Uchihara [email protected]

Fujitsu Limited 1- 1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel: +81-44-754-3885 ; Fax: +81-44-754-3769 Date: September 1, 2015 Power of Attorney To whom it may concern, Please be notified that I, Tsuyoshi Uchihara, have designated Chris Zombolas in EMC Technologies as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Chris Zombolas in EMC Technologies on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This authorization is limited to the product of as following: FCC ID: EJE-WB0096 If you have any acknowledgement and response, please send it to EMC Technologies directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Tsuyoshi Uchihara [email protected]

1/1 Fujitsu Limited 1- 1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Te l : +81-44-754-3885 ; Fax: +81-44-754-3769 Date: September 1, 2015 Federal Communications Commission Authorization and Evaluation Division RE : Certification Application FCC ID : EJE-WB0096 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days:  External Photos  Internal Photos  Test Setup Photos  User Manual The application contains technical information, which the applicant deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Tsuyoshi Uchihara [email protected]

Rev. 1/1/03 Fujitsu Limited 1- 1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel: +81-44-754-3885 ; Fax: +81-44-754-3769 Date: September 18, 2015 Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request regarding application for certification of FCC ID: EJE-WB0096 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request Permanent Confidential treatment of information accompanying this application as outlined below:  Operation Description  Tune up Procedure  8260NGW Hardware Operational Specification  8260NGW_BlockDiagram  8260NGW_Schematics  8260NGW Software Security Description  Bluetooth FHSS description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Tsuyoshi Uchihara [email protected]

EMC Technologies Pty Ltd, 176 Harrick VIC 3042 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 Web: www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria 3042, Australia Ph: + 613 9365 1000 Fax: + 613 9331 7455 Email: [email protected] To: Federal Communications Commission and Industry Canada Attention: Certification Manager No. of pages: 1 From: Rob Weir Date: 21 September 2015 EMC Ref.: M150828 Subject: FCC & IC APPROVAL – FCC ID: EJE-WB0096, IC: 337J-WB0096 Radiated spurious emission evaluation Upon the evaluation of the evidence supplied by the client, Fujitsu Ltd, the product: LIFEBOOK T Series, Model: T936 with Intel Dual Band Wireless-AC 8260 (Snowfield Peak) (11ac/abgn), Model 8260NGW + BT V4.0 Transmitter Was deemed to meet the radiated spurious emission requirements of the applicable FCC and IC requirements for DTS, DSSS and UNII. The WLAN+BT module was originally certified by INTEL as a modular approval under FCC ID: PD98260NG and Canada ID: 1000M-8260NG. The module was installed within the host device adhering to the grant requirements as attested by the accompanying letter titled ‘T936_Declaration letter of reusing Module Reports’. The maximum gain of the antennas utilised by the host was +1.91 dBi. The antenna gains listed in the Intel module reports were greater than +3 dBi and therefore the radiated emission results obtained for the module approval would not be degraded. The host device with WLAN+BT module was also declared to have met the FCC unintentional emission requirements for class B computer peripherals as attested by the accompanying letter titled ‘T936_Declaration of Conformity’ and Declaration of Conformity certificate. Conclusion As the module was installed into the host within the grant requirements, utilised lower gain antennas than the module testing and the host emissions met the FCC 15B Class B emission limits the Lifebook T series model T936 will comply with the radio spurious emission requirements. Best Regards ______________ Rob Weir Facility Manager, Melbourne EMC Technologies Pty Ltd

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission and Industry Canada Attention: Certification Manager No. of pages: 1 From: Donna Lennon Date: 15 September 2015 EMC Ref: M150828 Subject: FCC & IC APPROVAL – FCC ID: EJE-WB0096 (IC: 337J-WB0096) Please receive FCC/IC applications for review. The EUT is a LIFEBOOK T Series, Model: T936 with Intel Dual Band Wireless-AC 8260 (Snowfield Peak) (11ac/abgn), Model 8260NGW + BT V4.0 Transmitter. The WLAN+BT module was originally certified by INTEL as a modular approval under FCC ID: PD98260NG (Canada ID: 1000M-8260NG). The intention of this application is to FCC/IC certify Intel Dual Band Wireless-AC 8260 (Snowfield Peak) (11ac/abgn), Model 8260NGW + BT V4.0 Transmitter installed in LIFEBOOK T Series, Model T936. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this application is EJE-WB0096 and IC is 337J-WB0096. Please note: Due to Non-Disclosure Agreement, Fujitsu Limited will supply all permanent confidential files directly to TIMCO (via email) when this application is uploaded. Best Regards ______________ Donna Lennon Report Secretary EMC Technologies Pty Ltd

FCC ID: EJE-WB0096 (IC: 337J-WB0096) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au EXTERNAL PHOTOS FCC ID: EJE-WB0096 (IC: 337J-WB0096) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au FCC ID: EJE-WB0096 (IC: 337J-WB0096) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au

FCC ID: EJE-WB0096 (IC: 337J-WB0096) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au INTERNAL PHOTOS Host (internal photo) WLAN (shield removed)

Report No. M150814_FCC_8260NGW_SAR_2.4 Page 96 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX D CALIBRATION DOCUMENTS 1. ET3DV6 SN: 1380 Probe Calibration Certificate 2. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate 3. SN: 724 D2450V2 Dipole Calibration Certificate Report No. M150814_FCC_8260NGW_SAR_2.4 Page 97 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 98 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 99 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 100 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 101 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 102 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 103 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 104 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 105 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 106 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 107 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 108 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page …

Text truncated - open the document above for the full version.

Report No. M150814_FCC_8260NGW_SAR_2.4 Page 92 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX C DESCRIPTION OF SAR MEASUREMENT SYSTEM Probe Positioning System The measurements were performed with the state-of-the-art automated near-field scanning system DASY5 Version 52 from Schmid & Partner Engineering AG (SPEAG). The DASY5 fully complies with the IEEE 1528 and EN62209-1 and EN62209-2 SAR measurement requirements. E-Field Probe Type and Performance The SAR measurements were conducted with SPEAG dosimetric probe ET3DV6 Serial: 1380. Please refer to appendix D for detailed information. Data Acquisition Electronics The data acquisition electronics (DAE3) consists of a highly sensitive electrometer-grade preamplifier with auto- zeroing, a channel and gain switching multiplexer, a fast 16 bit AD-converter and a command decoder and control logic unit. The input impedance of the DAE3 box is 200 MΩ; the inputs are symmetrical and floating. Common mode rejection is above 80dB.Transmission to the PC-card is accomplished through an optical downlink for data and status information as well as an optical uplink for commands and the clock. The mechanical probe-mounting device includes two different sensor systems for frontal and sideways probe contacts. They are used for mechanical surface detection and probe collision detection. Device Holder for Laptops and P 10.1 Phantom A low loss clamp was used to position the DUT underneath the phantom surface. Refer to Appendix A for photographs of device positioning Liquid Depth 15cm During the SAR measurement process the liquid level was maintained to a level of 15cm with a tolerance of 0.5cm. Photograph Number 18. Photo of liquid Depth in Flat Phantom Report No. M150814_FCC_8260NGW_SAR_2.4 Page 93 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Phantom Properties The phantom used during the testing complies with the IEEE 1528 and EN62209-1 and EN62209-2 SAR measurement requirements. Table 18 Phantom Properties Phantom Properties Depth of Phantom 19 cm Width of flat section 40 cm Length of flat section 60 cm Thickness of flat section 2.0mm +/-0.2mm (flat section) Dielectric Constant <5.0 Loss Tangent <0.05 Report No. M150814_FCC_8260NGW_SAR_2.4 Page 94 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Tissue Material Properties The dielectric parameters of the brain simulating liquid were measured prior to SAR assessment using the HP85070A dielectric probe kit and HP8753ES Network Analyser. The actual dielectric parameters are shown in the following table. Table 19 Target Body Simulating Liquid Dielectric Values Frequency Band ∈r (target) σ (target) ρ kg/m 3 2412 MHz Muscle 52.7 ±5% (50.1 to 55.3) 1.95 ±5% (1.85 to 2.05) 1000 2437 MHz Muscle 52.7 ±5% (50.1 to 55.3) 1.95 ±5% (1.85 to 2.05) 1000 2472 MHz Muscle 52.7 ±5% (50.1 to 55.3) 1.95 ±5% (1.85 to 2.05) 1000 NOTE: The muscle liquid parameters were within the required tolerances of ±5%. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 95 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Simulated Tissue Composition Used for SAR Test The tissue simulating liquids are created prior to the SAR evaluation and often require slight modification each day to obtain the correct dielectric parameters. Table 20 Tissue Type: Muscle @ 2450MHz Volume of Liquid: 60 Litres Approximate Composition % By Weight Distilled Water 73.2 Salt 0.04 DGBE 26.7

Report No. M150814_FCC_8260NGW_SAR_2.4 Page 33 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 34 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Test Lab: EMCTech Test File: M150814 2450 MHz WLAN FCC.da52:0 DUT Name: Fujitsu Tablet with 11 abgn/ac WLAN, Type: 8260NGW, Serial: WFM (MAC):A4:34:D9:09:92:96 Configuration: Body Bystander ANT 1 (DSSS) 24-Aug-2015 Communication System: 0 - DSSS 2450 MHz 1Mbs; Communication System Band: ISM 2.4 GHz; Frequency: 2442 MHz, Communication System PAR: 0.00 dB; PMF: 1.00; Duty Cycle: 1:1.00 Medium Parameters used: f=2442 MHz; σ = 1.94 S/m; ε r = 52.0; ρ = 1000.0g/cm 3 Phantom section: Flat Section DASY Configuration: Probe: ET3DV6 - SN1380; ConvF: (4.1,4.1,4.1); Calibrated: 11/12/2014; Sensor-Surface: 4 mm (Mechanical Surface Detection) Electronics: DAE3 Sn442; Calibrated: 3/12/2014 Phantom: ELI v4.0 (30deg probe tilt); Type: QDOVA001BB; Serial: TP:1101 DASY52 52.8.8(1222); SEMCAD X Version 14.6.10 (7331) Body Bystander ANT 1 (DSSS) 24-Aug-2015/Channel 7 Test/Area Scan (51x71x1): Interpolated grid: dx=1.2 mm, dy=1.2 mm; Maximum value of SAR (interpolated) = 0.021 W/kg Body Bystander ANT 1 (DSSS) 24-Aug-2015/Channel 7 Test/Zoom Scan (31x31x36)/Cube 0: Interpolated grid: dx=1.0 mm, dy=1.0 mm, dz=1.0 mm; Reference Value = 2.609 V/m; Power Drift = -0.21 dB Averaged SAR: SAR(1g) = 0.021 W/kg; SAR(10g) = 0.012 W/kg Maximum value of SAR (interpolated) = 0.052 W/kg 0 dB = 0.0208 W/kg = -16.82 dBW/kg SAR Measurement Plot 1 Report No. M150814_FCC_8260NGW_SAR_2.4 Page 35 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M150814_FCC_8260NGW_SAR_2.4 Page 36 of 122 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Test Lab: EMCTech Test File: M150814 2450 MHz WLAN FCC.da52:1 DUT Name: Fujitsu Tablet with 11 abgn/ac WLAN, Type: 8260NGW, Serial: WFM (MAC):A4:34:D9:09:92:96 Configuration: Body Bystander ANT 2 (DSSS) 24-Aug-2015 Communication System: 0 - DSSS 2450 MHz 1Mbs; Communication System Band: ISM 2.4 GHz; Frequency: 2442 MHz, Communication System PAR: 0.00 dB; PMF: 1.00; Duty Cycle: 1:1.00 Medium Parameters used: f=2442 MHz; σ = 1.94 S/m; ε r = 52.0; ρ = 1000.0g/…

Text truncated - open the document above for the full version.