EJE-WL0027TAYLOR PEAK 62205 ANHMW WLAN IN T902 LIFEBOOK PC

 User’s Guide Learn how to use your Fujitsu LIFEBOOK T902 Tablet PC  Guide d’utilisation Découvrez comment utiliser votre ordinateur portable Fujitsu LIFEBOOK T902 1 - User’s GuideLearn how to use your Fujitsu LIFEBOOK T902 Tablet PC 1 Copyright and Trademark Information Fujitsu America, Inc. has made every effort to ensure the accuracy and completeness of this document; however, as ongoing devel opment efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We d isclaim liability for errors, omissions, or future changes.Fujitsu, the Fujitsu logo, and LIFEBOOK are registered trademarks of Fujitsu Limited. Intel, Intel Core, and Centrino are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Atheros is a registered trademark of Atheros Communications, Inc.Bluetooth is a trademark of Bluetooth SIG, Inc., USA.OmniPass is a trademark of Softex, Inc.PowerDirector, PowerDVD, MakeDisc, and Yo uCam are trademarks of CyberLink Corp. Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Norton and Norton Internet Security are trademarks or registered trademarks of Symantec Corporation in the United States and ot her countries. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, and DTS and the Symbol together are registered trademar ks, and DTS Boost is a trademark of DTS (BVI) Li mited (in Hong Kong and China) and DTS, In c. (outside of Hong Kong and China). © DT S, Inc. All Rights Reserved. All other trademarks mentioned herein are the property of their respective owners. © Copyright 2012 Fujitsu America, Inc. All rights reserved. No part of this publication may be copied, reproduced, or transl ated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without th e written consent of Fujitsu. B6FJ-8321-01ENZ0-00 2 W ARNING : H ANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD , A CHEMICAL KNOWN TO THE S TATE OF C ALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM . W ASH HANDS AFTER HANDLING . U SER G UIDE FOR W IRELESS B ROADBAND C ONNECTION I F YOU HAVE THE OPTIONAL W IRELESS WAN (WWAN) DEVICE INSTALLED IN YOUR NOTEBOOK , THE WWAN U SER ’ S G UIDE IS LOCATED AT : HTTP :// SOLUTIONS . US . FUJITSU . COM / WWW / CONTENT / SUPPORT / MOBILE / SUPPORT _ NOTICES P LEASE CLICK “3G M INI -C ARD G OBI 3000 R EGULATORY AND S AFETY I NFORMATION ” TO OPEN THE FULL USER GUIDE CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH RF SAFETY WHEN USING THE WWAN DEVICE . DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: F ujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Configuration: LIFEBOOK T902 Tablet PC Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to th e following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interferen ce that may cause undesired operation. 3 IMPORTANT SAFETY INSTRUCTIONS This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Adapters with an output rating of 19 VDC, with a current of 4.22 A (80 W). When using your notebook equipment, basic sa fety precautions should always be followed to reduce the risk of fire, electric sho ck and injury to persons, including the following: • The bottom of this notebook computer can become hot when used for long periods of time. When us ing this notebook, take caution to limit long term or continuous use while resting it on exposed skin, such as the lap. • Do not use this product near water for exam ple, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or nea r a swimming pool. • Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. • CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions on the next page. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only D ANGER OF EXPLOSION IF L ITHIUM ( CLOCK ) BATTERY IS INCORRECTLY REPLACED . R EPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER . D ISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER ’ S INSTRUCTION . F OR CONTINUED PROTECTION AGAINST RISK OF FIRE , REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE . + AC adapter output polarity: 4 Recycling your battery Over time, the batteries that run your mobi le computer will begin to hold a charge for a shorter amount of time; this is a natu ral occurrence for all batteries. When this occurs, you may want to replace the battery with a fr esh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly. Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Co rporation (RBRC)**, a non-profit public service organization dedicated to protecting our environment by recycling old batteries at no cos t to you. RBRC has drop-off points at tens of thousands of locations thro ughout the United States and Canada. To find the location neares t you, go to www.RBRC.org or call 1-800-822-8837. If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website ( http://EIAE.org/ ) and search for a convenient disposal l…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission and Industry Canada Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 27 th June 2012 EMC Ref: M120602_FCC_62205ANHMW Subject: FCC APPROVAL – FCC ID: EJE-WL0027 (IC: 337J-WL0027) Please receive FCC/IC applications for review. The EUT is a Fujitsu LifeBook T Series, Model: T902 with Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW. The Taylor Peak 2x2 WLAN module was originally certified by INTEL as a modular approval under FCC ID: PD962205ANH (Canada ID: 1000M-62205ANH). The other transmitter installed in the T902 LifeBook is Broadcom Bluetooth Module, Model: BCM92070MD_REF6. The Bluetooth module was originally certified by Broadcom as a modular approval under FCC ID: QDS-BRCM1043 (Canada ID: 4324A-BRCM1043). This Bluetooth preapproved module, is not co-located as the WLAN and Bluetooth antennas are >5cms apart. RF exposure and labeling will be addressed by Fujitsu according to FCC multi-transmitter and modular procedures. The intention of this application is to FCC/IC certify Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW installed in Fujitsu LifeBook T Series, Model: T902. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WL0027 and IC is 337J-WL0027 Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, ____________________________ Name: Tsuyoshi Uchihara Title: Engineer Date: 25 th June 2012

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission - Authorization and Evaluation Division Industry Canada – Certification and Engineering Bureau Confidentiality Request regarding application for certification of FCC ID: EJE-WL0027 and IC ID: 337J-WL0027. Pursuant to FCC DA 04-1705, this application includes a request for short term confidentiality for the following exhibits: External Photos Appendix B1_External Photos Test Setup Photos Appendix B2_Test Setup Photos Location Photos Appendix B3_Location Photos Internal Photos Appendix B4_Internal Photos User Manual Appendix H_User Manual As the above information contains proprietary information which would be benefit to our competitors, we request that these exhibits be held from public view for 180 days from the issue date of the grant of approval. In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Operational Description CONF_Appendix C_62205ANHMW_OPDES Block Diagram CONF_Appendix D_62205ANHMW_BLKDIA Schematics CONF_Appendix E_62205ANHMW_SCHEM Antenna Details CONF_Appendix F_62205ANHMW_Antenna The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________________ Tsuyoshi Uchihara Title : Engineer Date: 25 th June 2012

Intel Corporation 100 Center Point Circle Columbia, SC 29210 August 27, 2010 American TCB 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Subject: Model 62205ANHMW Wireless Lan PCIe Card FCC ID’s: PD962205ANH and PD962205ANH; IC: 1000M-62205ANH Gentlemen: Please be advised that the Model 62205ANHMW Wireless Lan PCIe card is manufactured for the global market but when marketed in North America under FCC ID’s PD962205ANH or PD962205ANHU and IC: 1000M-62205ANH the EEPROM will be programmed at the factory to only operate and actively scan on these specific channels: Channels 1-11, 2412-2462MHz 802.11b mode Channels 1-11, 2412-2462MHz 802.11g mode Channels 1-11, 2412-2462MHz 802.11n mode (20MHz channel) Channels 3-9, 2422-2452MHz 802.11n mode (40MHz channel) The following channels will be programmed at the factory to passively scan and will only listen and cannot send a probe request to initiate communication on these specific channels. Ad-hoc mode is always disabled on these passive channels. Channels 12 &13, 2467 & 2472MHz 802.11b mode Channels 12 &13, 2467 & 2472MHz 802.11g mode Channels 12 &13, 2467 & 2472MHz 802.11n mode (20/40MHz channel) Channels 36-48, 5180-5240MHz 802.11a mode Channels 36-48, 5180-5240MHz 802.11n mode (20 MHz channel) Channels 38-46, 5190-5230MHz 802.11n mode (40MHz channel) Channels 52-64, 5260-5320MHz 802.11a mode Channels 52-64, 5260-5320MHz 802.11n mode (20 MHz channel) Channels 54-62, 5270-5310MHz 802.11n mode (40MHz channel) Channels 100-140, 5500-5700MHz 802.11a mode Channels 100-140, 5500-5700MHz 802.11n mode (20 MHz channel) Channels 102-134, 5510-5670MHz 802.11n mode (40MHz channel) Channels 149-165, 5745-5825 802.11a mode Channels 149-165, 5745-5825MHz 802.11n mode (20 MHz channel) Channels151-159, 5755-5795 802.11n mode (40MHz channel) This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. If you have any questions please do not hesitate to contact us at 803-216-2344. Sincerely, Steven C. Hackett Wireless Regulatory Engineer

FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS

FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS

FCC ID: EJE-WL0027 (IC: 337J-WL0027) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au RF EXPOSURE INFORMATION RADIO FREQUENCY EXPOSURE (HAZARD) INFORMATION Testing was performed in accordance with the requirements of FCC Part 15.247(i) and FCC Part 15.407(f). Spread spectrum transmitters operating in the 2400 - 2483.5 MHz & 5725 – 5850 MHz (15.247) and 5.15 – 5.35 GHz & 5.47 – 5.725 GHz (15.407) bands are required to be operated in a manner that ensures that the public is not exposed to RF energy levels in accordance with CFR 47, Section 1.1307(b)(1). In accordance with this section and also section 2.1093 this device has been defined as a portable device. Intel 62205ANHMW WLAN module was installed in the Portable PC T902 Fujitsu LifeBook. SAR testing was performed in accordance with OET Bulletin 65 and reported under EMC Technologies reports M120603_FCC_62205ANHMW_SAR_2.4 (2.4 GHz) and M120603_FCC_62205ANHMW_SAR_5.6 (5.18 – 5.825 GHz). SAR values of 1.36 mW/g (5GHz) and 0.364 mW/g (2.4GHz) were measured which complied with the FCC human exposure requirements of 47 CFR 2.1093 (d). The other transmitter installed in the Portable PC T902 Fujitsu LifeBook is a Broadcom Bluetooth Module, Model: BCM92070MD_REF6. This Bluetooth module was originally certified by Broadcom as a modular approval under FCC ID: QDS-BRCM1043 (Canada ID: 4324A-BRCM1043). SAR measurements were not required because the Bluetooth transmit power is very low and Bluetooth antenna is located at more than 5cm away from the other transmitting antennas. RF exposure and labeling will be addressed by Fujitsu according to FCC multi-transmitter and modular procedures.

Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 22 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A1 TEST SAMPLE PHOTOGRAPHS T902 Host - Conventional Laptop Configuration T902 Host - Tablet Configuration Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 23 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A2 TEST SAMPLE PHOTOGRAPHS Model: 62205ANHMW – WLAN Module Front Back Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 24 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A3 TEST SAMPLE PHOTOGRAPHS Battery 1 Battery 2 62205ANHMW inside the Fujitsu TABLET Computer Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 25 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A4 TEST SETUP PHOTOGRAPHS Lap Held Position Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 26 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A5 TEST SETUP PHOTOGRAPHS Edge On Secondary Landscape Position Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 27 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A6 TEST SETUP PHOTOGRAPHS Edge On Primary Portrait Position Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 28 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A7 TEST SETUP PHOTOGRAPHS Bystander Position (25mm spacing) Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 29 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX A8 TEST SETUP PHOTOGRAPHS Secondary Portrait Position (25mm spacing)

Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 30 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Table 21 2450 MHz DSSS Band SAR Measurement Plot Numbers Table 22 2450MHz System verification Plot Plot 8 System Verification 2450 MHz 12 th June 2012 Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Lap Held 1 A 6 - 06 Edge On Secondary Landscape 2 A 6 - 06 3 B 6 - 06 4 B 6 - 02 5 B 6 - 10 Edge On Primary Portrait 6 A 6 - 06 7 B 6 - 06 R T F D 0 - - C d M C d R P S M Report No. M120 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=15mm Maximum va Configur dx=5mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 0603_FCC_6220 e: 12 Jun M120603 Lap u Tablet Ter 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =5mm, dz=5 alue = 5.011 extrapolated) 0.071 mW/g; lue of SAR ( 0 dB = 0.0 emperature perature 05ANHMW_SAR_ Accredited for included in thi s Mutual Recog inspection re p e 2012 p Held OFDM rcel with Tay m: OFDM 24 sed: f = 2436 42; Probe: ET m 10.1; Serial annel 6 T (interpolated) annel 6 T mm V/m; Powe r ) = 0.158 mW ; SAR(10 g) (measured) = 0774 mW/g = SA _2.4 rcompliance wit s document are nition Arrangem ports. T M 2450 MHz ylor 11abgn 50 MHz 6 M 6 MHz; σ = 1 T3DV6 - SN : P 10.1; Ph a Test/Area ) = 0.0774 m Test/Zoom r Drift = 0.11 W/g = 0.040 m W = 0.0750 mW = -22.23 dB AR MEAS th ISO/IEC 1702 e traceable to Au ment for the mut This document s Antenna A ( and Blueto bs; Frequen .943 mho/m ; 1380; ConvF antom sectio a Scan (7 mW/g m Scan ( dB W/g W/g mW/g SUREME 20.9 20.5 39.0 25. The results ustralian/nationa tual recognition shall not be repr 1) 12-06-12. oth; Type: 6 cy: 2437 MH ; ε r = 53.091; F(4.15, 4.15, on: Flat 2.2 S 71x81x1): (7x7x7)/C ENT PLOT Degrees Ce Degrees Ce % of the test, cali b al standards. N of the equivalen roduced except .da52:0 62205ANHM Hz; Duty Cyc ; ρ = 1000 kg 4.15); Calib Section : Measureme Cube 0: M T 1 elsius elsius Page 31 o brations and/or NATA is a signat nce of testing, c in full. MW; Serial: W le: 1:12.9778 g/m 3 rated: 12/12 / ent grid: dx= easurement of 70 measu rement tory to the ILAC calibration and WFM: 8 /2011 15mm, grid: C R Report No. M1200603_FCC_6220 05ANHMW_SAR_ Accredited for included in thi s Mutual Recog inspection re p _2.4 rcompliance wit s document are nition Arrangem ports. T th ISO/IEC 1702 e traceable to Au ment for the mut This document s 25. The results ustralian/nationa tual recognition shall not be repr of the test, cali b al standards. N of the equivalen roduced except Page 32 o brations and/or NATA is a signat nce of testing, c in full. of 70 measu rement tory to the ILAC calibration and C R T F D 0 - - C d M C d R P S M Report No. M120 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=15mm Maximum va Configur dx=5mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 0603_FCC_6220 e: 12 Jun M120603 Edg u Tablet Ter 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =5mm, dz=5 alue = 8.597 extrapolated) 0.182 mW/g; lue of SAR ( 0 dB = 0.1 emperature perature 05ANHMW_SAR_ Accredited for included in thi s Mutual Recog inspection re p e 2012 ge On Secon rcel with Tay m: OFDM 24 sed: f = 2436 42; Probe: ET m 10.1; Serial annel 6 T (interpolated) annel 6 T mm 7 V/m; Power ) = 0.395 mW ; SAR(10 g) (measured) = 192 mW/g = SA _2.4 rcompliance wit s document are nition Arrangem ports. T ndary Landsc ylor Peak 11 50 MHz 6 M 6 MHz; σ = 1 T3DV6 - SN : P 10.1; Ph a Test/Area ) = 0.192 mW Test/Zoom r Drift = -0.11 W/g = 0.091 m W = 0.199 mW/ -14.33 dB m AR MEAS th ISO/IEC 1702 e traceable to Au ment for the mut This document s cape OFDM 1abgn and B bs; Frequen .943 mho/m ; 1380; ConvF antom sectio a Scan (7 W/g m Scan ( 1 dB W/g /g mW/g SUREME 20.9 20.5 39.0 25. The results ustralian/nationa tual recognition shall not be repr 2450 MHz A Bluetooth; T cy: 2437 MH ; ε r = 53.091; F(4.15, 4.15, on: Flat 2.2 S 71x81x1): (7x7x7)/C ENT PLOT Degrees Ce Degrees Ce % of the test, cali b al standards. N of the equivalen roduced except Antenna A (1 Type: 62205A Hz; Duty Cyc ; ρ = 1000 kg 4.15); Calib Section : Measureme Cube 0: M T 2 elsius elsius Page 33 o brations and/or NATA is a signat nce of testing, c in full. ) 12-06-12.d ANHMW; Se le: 1:12.9778 g/m 3 rated: 12/12 / ent grid: dx= easurement of 70 measu rement tory to the ILAC calibration and da52:0 erial: WFM: 8 /2011 15mm, grid: C R Report No. M1200603_FCC_6220 05ANHMW_SAR_ Accredited for included in thi s Mutual Recog inspection re p _2.4 rcompliance wit s document are nition Arrangem ports. T th ISO/IEC 1702 e traceable to Au ment for the mut This document s 25. The results ustralian/nationa tual recognition shall not be repr of the test, cali b al standards. N of the equivalen roduced except Page 34 o brations and/or NATA is a signat nce of testing, c in full. of 70 measu rement tory to the ILAC calibration and C R T F D 0 - - C d M C d R P S M Report No. M120 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=15mm Maximum va Configur dx=5mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 0603_FCC_6220 e: 12 Jun M120603 Edg u Tablet Ter 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/C…

Text truncated - open the document above for the full version.

Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 47 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. APPENDIX C CALIBRATION DOCUMENTS 1. SN: 1380 Probe Calibration Certificate 2. SN: D2450V2 Dipole Calibration Certificate 3. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 48 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 49 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 50 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 51 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 52 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 53 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 54 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full. Report No. M120603_FCC_62205ANHMW_SAR_2.4 Page 55 of 70 Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are…

Text truncated - open the document above for the full version.