EJE-WL0028TAYLOR PEAK 62205ANHMW WLAN IN Q702 STYLISTIC

User’s Guide Learn how to use your Fujitsu STYLISTIC ® Q702 Hybrid Tablet Copyright and Trademark Information Fujitsu America, Inc.has made every effort to ensure the accura cy and completeness of this document. Because ongoing developmen t efforts are made to continually improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives a nd is provided for comparative purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty. Specificatio ns are subject to change without knowledge.Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; STYLISTIC is a registered trademark of Fujitsu Ameri ca, Incorporated. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countr ies. The SD Logo is registered with the U.S. Patent and Trademark O ffice and with other trademark offices around the world by SD-3C, LLC. Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. OmniPass is a trademark of Softex, Inc.Google is a trademark or registered trademark of Google Incorporated. Atheros is a registered trademark of Atheros Communications, Inc.Norton Internet Security is a trademark of Symantec Corporation in the United States and other countries.AirPrime is a trademark of Sierra Wireless Inc.Roxio is a trademark of Roxio, a division of Sonic Solutions.Gobi3000 is a trademark of Qualcomm Inc.Nuance and XT9 are either registered trademarks or trademarks of Nuance Communications, Incorporated.Adobe and Adobe Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc.Realtek is a trademark of Realtek Semiconductor Corp.Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance (WECA).All other products are trademarks or registered trademarks of their respective companies. All other trademarks mentioned herein are the property of their respective owners . Copyright 2012 Fujitsu America, Inc. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu America, Incorporated. No part of this publication may be stored or transmitted in any electronic form witho ut the prior consent of Fujitsu America, Inc. B6FJ-8761-01ENZ0-00 U SER G UIDE FOR W IRELESS B ROADBAND C ONNECTION I F YOU HAVE THE OPTIONAL W IRELESS WAN (WWAN) DEVICE INSTALLED IN YOUR H YBRID TABLET , THE WWAN U SER ’ S G UIDE IS LOCATED AT : http://solutions.us.fujitsu.com/www/content/support/mobile/support_noticesP LEASE CLICK “3G M INI -C ARD G OBI 3000 R EGULATORY AND S AFETY I NFORMATION ” TO OPEN THE FULL USER GUIDE CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH RF SAFETY WHEN USING THE WWAN DEVICE . DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: F ujitsu America, Inc. Address: 1250 E. Arques Avenue Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Config uration: STYLISTIC Q702 Hybrid Tablet Complies with Part 15 of the FCC Rules. This device complies with Part 15 of the FCC rules. Operations are subject to th e following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interferen ce that may cause undesired operation. IMPORTANT SAFETY INSTRUCTIONSThis unit requires an AC adapter to operate. Use only UL Listed I.T.E. Adapters with an output rating of 19 VDC, with a current of 3.16A (60 W). When using your Hybrid Tablet, basic safety precautions should always be followed to reduce the risk of fire, electric shock an d injury to persons, including the following: • Do not use this product near water for exampl e, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or nea r a swimming pool. • Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS For Authorized Repair Technicians Only CAUTION: HOT SURFACE: T HE BOTTOM OF THIS COMPUTER CAN BECOME HOT WHEN USED FOR LONG PERIODS OF TIME . W HEN USING THIS DEVICE , TAKE CAUTION TO LIMIT LONG TERM OR CONTINUOUS USE WHILE RESTING IT ON EXPOSED SKIN , SUCH AS THE LAP . CAUTION: R ISK OF E XPLOSION IF B ATTERY IS REPLACED BY AN I NCORRECT T YPE . D ISPOSE OF U SED B ATTERIES A CCORDING TO THE I NSTRUCTIONS . D ANGER OF EXPLOSION IF L ITHIUM ( CLOCK ) BATTERY IS INCORRECTLY REPLACED . R EPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER . D ISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER ’ S INSTRUCTION . F OR CONTINUED PROTECTION AGAINST RISK OF FIRE , REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE . + AC adapter output polarity: 5 Contents Chapter 1 Getting to Know Yo ur H ybrid Tablet Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Locating the Connectors and Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Front Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Back Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Left features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Right Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Status Indicator Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Adjusting Display…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission and Industry Canada Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 15 th August 2012 EMC Ref: M120811_FCC_62205ANHMW Subject: FCC & IC APPROVAL – FCC ID: EJE-WL0028 (IC: 337J-WL0028) Please receive FCC/IC applications for review. The EUT is a STYLISTIC Q Series, Model: Q702 with Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW. The Taylor Peak 2x2 WLAN module was originally certified by INTEL as a modular approval under FCC ID: PD962205ANH (Canada ID: 1000M-62205ANH). The other transmitter installed in the STYLISTIC Q Series, Model: Q702 is Broadcom Bluetooth Module, Model: BCM92070MD_REF6. The Bluetooth module was originally certified by Broadcom as a modular approval under FCC ID: QDS-BRCM1043 (Canada ID: 4324A-BRCM1043). This Bluetooth preapproved module, is not co-located as the WLAN and Bluetooth antennas are >5cms apart. RF exposure and labeling will be addressed by Fujitsu according to FCC multi-transmitter and modular procedures. The intention of this application is to FCC/IC certify Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW installed in STYLISTIC Q Series, Model: Q702. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WL0028 and IC is 337J-WL0028 Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, ____________________________ Name: Tsuyoshi Uchihara Title: Engineer Date: 25 th June 2012

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission - Authorization and Evaluation Division Industry Canada – Certification and Engineering Bureau Confidentiality Request regarding application for certification of FCC ID: EJE-WL0028 and IC ID: 337J-WL0028. Pursuant to FCC DA 04-1705, this application includes a request for short term confidentiality for the following exhibits: External Photos Appendix B1_External Photos Test Setup Photos Appendix B2_Test Setup Photos Location Photos Appendix B3_Location Photos Internal Photos Appendix B4_Internal Photos User Manual Appendix H_User Manual As the above information contains proprietary information which would be benefit to our competitors, we request that these exhibits be held from public view for 180 days from the issue date of the grant of approval. In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Operational Description CONF_Appendix C_62205ANHMW_OPDES Block Diagram CONF_Appendix D_62205ANHMW_BLKDIA Schematics CONF_Appendix E_62205ANHMW_SCHEM Antenna Details CONF_Appendix F_62205ANHMW_Antenna The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________________ Tsuyoshi Uchihara Title : Engineer Date: 15 th August 2012

1 From: Rao, Praveen [[email protected]] Sent: Tuesday, October 23, 2012 3:45 AM To: Chieu; Timco Engineering Subject: RE: FCC/RT - TIMCO-TCB/Request for additional info - FUJITSU LIMITED - FCC ID: EJE- WL0028 - JOB #: 2073AC12 Attachments: Fujitsu Declaration Letter.pdf; M120811_FCC_62205ANHMW_NII.pdf; M120811_FCC_ 62205ANHMW_DTS.pdf To Timco, Sending on behalf of Chieu from EMC Technologies. Please see attached documents as requested. All relevant tests that apply for a new host were tested and submitted with the application. Attached here. The module has Full modular approval by vendor and is identical to the module used in our host, Declarations are now attached. Hope this will suffice. Cheers, Praveen From: [email protected] [mailto:[email protected]] Sent: Saturday, 20 October 2012 12:33 AM To: [email protected]; [email protected]; [email protected] Subject: FCC/RT - TIMCO-TCB/Request for additional info - FUJITSU LIMITED - FCC ID: EJE-WL0028 - JOB #: 2073AC12 TIMCO ENGINEERING INC. TCB & FCB 849 NW State Road 45 FCC Approvals Newberry, Florida 32669 Industry Canada Approvals http://www.timcoengr.com Notified Body for Europe 888.472.2424 F 352.472.2030 email: [email protected] October 19, 2012 MR. Chieu Huynh EMC TECHNOLOGIES PTY LTD-HARRICK 61-03-9331-7455 [email protected] ; [email protected]; [email protected]

Fujitsu Limited 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel: +81-44-754-3885 ; Fax: +81-44-754-3769 Date: October 23, 2012 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC ID: EJE-WL0028 The EUT is a STYLISTIC Q Series, Model: Q702 with Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW. The Intel WLAN module 62205ANHMW was originally certified by INTEL as a Full modular approval under FCC ID: PD962205ANH. The Radio modules in this application are “Full Modular Certified” by the module vendor. The same module is used in this host and we declare that these modules are electronically and mechanically identical to the original certified module and comply with the vendors’ instructions and requirements. Therefore, we, Fujitsu Limited, take the responsibility to ensure each module complied with all requirements after integration in host and when modules are transmitting simultaneously. Should you have any enquiries or comments, please have my best attention. Sincerely Yours, ______________________________ Contact Person: Tsuyoshi Uchihara Company: Fujitsu Limited TEL: +81-44-754-3885 FAX: +81-44-754-3769 E-mail: [email protected]

FCC ID: EJE-WL0028 (IC: 337J-WL0028) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0028 (IC: 337J-WL0028) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0028 (IC: 337J-WL0028) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS

FCC/IC Label (Screen Printing) for Q702 with Taylor Peak WLAN and Broadcom Bluetooth LABEL LOCATION FCC/IC Label (Screen Printing) for Q702 with Taylor Peak WLAN Only

FCC ID: EJE-WL0028 (IC: 337J-WL0028) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS FCC ID: EJE-WL0028 (IC: 337J-WL0028) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS

Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 28 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Table 22 5200 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Lap Held 1 A 6 - 36 2 6 - 48 3 6 - 52 4 6 - 64 5 B 6 - 36 6 6 - 48 7 6 - 52 8 6 - 64 Edge On Primary Portrait 9 B 6 - 48 Table 23 5600 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Lap Held 10 A 6 - 104 11 6 - 116 12 6 - 124 13 6 - 136 14 B 6 - 104 15 6 - 116 16 6 - 124 17 6 - 136 Table 24 5800 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Lap Held 18 A 6 - 149 19 6 - 157 20 6 - 165 21 B 6 - 149 22 6 - 157 23 6 - 165 Edge On Primary Portrait 24 A 6 - 149 Table 25 System verification Plots Plot 25 System Verification 5200 MHz 7 th August 2012 Plot 26 System Verification 5500 MHz 8 th August 2012 Plot 27 System Verification 5800 MHz 10 th August 2012 R T F D 0 - - C d M C d R P S M Report No. M1 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=10mm Maximum va Configur dx=4mm, dy= Reference Va Peak SAR (e SAR(1 g) = 1 Maximum va Ambient T e Liquid Tem Humidity 20808_FCC_622 e: 7 Augu M120808 Lap u Tablet Qua 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =4mm, dz=2 alue = 12.04 extrapolated) 1.03 mW/g; S lue of SAR ( 0 dB = 0.9 emperature perature 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum ust 2012 p Held OFDM attro with Ta m: OFDM 5 G sed: f = 5183 42; Probe: EX m 10.1; Serial annel 36 (interpolated) annel 36 mm 44 V/m; Powe ) = 4.481 mW SAR(10 g) = (measured) = 933 mW/g = SA R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl M 5200 MHz aylor Peak 1 GHz 6 Mbs; F 3.2 MHz; σ = X3DV4 - SN : P 10.1; Ph a Test/Are ) = 0.933 mW Test/Zoo er Drift = 0.1 W/g = 0.316 mW/ = 2.11 mW/g -0.60 dB m W AR MEAS n accordanc e r measureme rds. NATA is of the equivale ly be reprodu (-1.5 dB) An 11abgn and Frequency: 5 5.349 mho/m 3563; ConvF antom sectio ea Scan ( W/g om Scan 6 dB g W/g SUREME 20.5 20.2 36.0 e with NATA’s ents included a signatory to ence of testing uced in full, w ntenna A (1) Bluetooth; 5180 MHz; D m; ε r = 47.36 F(3.79, 3.79, on: Flat 2.2 S (91x121x (7x7x12 ENT PLOT Degrees Ce Degrees Ce % accreditatio n d in this d o the ILAC Mu g and calibrati with the excep 07-08-12.da Type: 62205 Duty Cycle: 1 69; ρ = 1000 3.79); Calib Section x1): Measur )/Cube 0 T 1 elsius elsius Page n requirements document ar utual Recognit ion reports. ption of the c 52:0 5ANHMW; S :17.0451 kg/m 3 rated: 21/06 / rement grid: d : Measurem 29 of 111 s. The results re traceable tion Arrangem certificate on Serial: WFM /2012 dx=10mm, ent grid: s of to ment p3 : R Report No. M120808_FCC_622 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl n accordanc e r measureme rds. NATA is of the equivale ly be reprodu e with NATA’s ents included a signatory to ence of testing uced in full, w accreditatio n d in this d o the ILAC Mu g and calibrati with the excep Page n requirements document ar utual Recognit ion reports. ption of the c 30 of 111 s. The results re traceable tion Arrangem certificate on s of to ment p3 R T F D 0 - - C d M C d R P S M Report No. M1 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=10mm Maximum va Configur dx=4mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 20808_FCC_622 e: 7 Augu M120808 Lap u Tablet Qua 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =4mm, dz=2 alue = 9.653 extrapolated) 0.795 mW/g; lue of SAR ( 0 dB = 0.7 emperature perature 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum ust 2012 p Held OFDM attro with Ta m: OFDM 5 G sed: f = 5242 42; Probe: EX m 10.1; Serial annel 48 (interpolated) annel 48 mm 3 V/m; Power ) = 3.587 mW ; SAR(10 g) (measured) = 761 mW/g = SA R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl M 5200 MHz aylor Peak 1 GHz 6 Mbs; F 2.6 MHz; σ = X3DV4 - SN : P 10.1; Ph a Test/Are ) = 0.761 mW Test/Zoo r Drift = -0.13 W/g = 0.239 m W = 1.62 mW/g -2.37 dB m W AR MEAS n accordanc e r measureme rds. NATA is of the equivale ly be reprodu (-1.5 dB) An 11abgn and Frequency: 5 5.471 mho/m 3563; ConvF antom sectio ea Scan ( W/g om Scan 3 dB W/g W/g SUREME 20.5 20.2 36.0 e with NATA’s ents included a signatory to ence of testing uced in full, w ntenna A (1) Bluetooth; 5240 MHz; D m; ε r = 47.21 F(3.79, 3.79, on: Flat 2.2 S (91x121x (7x7x12 ENT PLOT Degrees Ce Degrees Ce % accreditatio n d in this d o the ILAC Mu g and calibrati with the excep 07-08-12.da Type: 62205 Duty Cycle: 1 2; ρ = 1000 3.79); Calib Section x1): Measur )/Cube 0 T 2 elsius elsius Page n requirements document ar utual Recognit ion reports. ption of the c 52:0 5ANHMW; S :17.0451 kg/m 3 rated: 21/06 / rement grid: d : Measurem 31 of 111 s. The results re traceable tion Arrangem certificate on Serial: WFM /2012 dx=10mm, ent grid: s of to ment p3 : R Report No. M120808_FCC_622 205ANHMW_SAR This docume test…

Text truncated - open the document above for the full version.

R Report No. M120808_FCC_622 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl n accordanc e r measureme rds. NATA is of the equivale ly be reprodu e with NATA’s ents included a signatory to ence of testing uced in full, w accreditatio n d in this d o the ILAC Mu g and calibrati with the excep Page n requirements document ar utual Recognit ion reports. ption of the c 56 of 111 s. The results re traceable tion Arrangem certificate on s of to ment p3 R T F D 0 - - C d M C d R P S M Report No. M1 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=10mm Maximum va Configur dx=4mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 20808_FCC_622 e: 8 Augu M120808 Lap u Tablet Qua 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =4mm, dz=2 alue = 7.623 extrapolated) 0.726 mW/g; lue of SAR ( 0 dB = 0.6 emperature perature 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum ust 2012 p Held OFDM attro with Ta m: OFDM 5 G sed: f = 5579 42; Probe: EX m 10.1; Serial annel 11 (interpolated) annel 11 .5mm 3 V/m; Power ) = 2.935 mW ; SAR(10 g) (measured) = 632 mW/g = SA R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl M 5600 MHz aylor Peak 1 GHz 6 Mbs; F 9.2 MHz; σ = X3DV4 - SN : P 10.1; Ph a 6 Test/Ar ) = 0.632 mW 6 Test/Zo r Drift = -0.20 W/g = 0.190 m W = 1.45 mW/g -3.99 dB m W AR MEAS n accordanc e r measureme rds. NATA is of the equivale ly be reprodu Antenna B ( 11abgn and Frequency: 5 5.925 mho/m 3563; ConvF antom sectio rea Scan W/g oom Sca 0 dB W/g W/g SUREMEN 20.8 20.5 37.0 e with NATA’s ents included a signatory to ence of testing uced in full, w 2) 08-08-12. Bluetooth; 5580 MHz; D m; ε r = 48.51 F(3.4, 3.4, 3. on: Flat 2.2 S n (91x121 n (7x7x9 NT PLOT Degrees Ce Degrees Ce % accreditatio n d in this d o the ILAC Mu g and calibrati with the excep .da52:0 Type: 6220 5 Duty Cycle: 1 6; ρ = 1000 4); Calibrat e Section x1): Measu )/Cube 0 T 15 elsius elsius Page n requirements document ar utual Recognit ion reports. ption of the c 5ANHMW; S :17.0451 kg/m 3 ed: 21/06/201 urement grid : Measurem 57 of 111 s. The results re traceable tion Arrangem certificate on Serial: WFM 12 d: dx=10mm, ent grid: s of to ment p3 : R Report No. M120808_FCC_622 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl n accordanc e r measureme rds. NATA is of the equivale ly be reprodu e with NATA’s ents included a signatory to ence of testing uced in full, w accreditatio n d in this d o the ILAC Mu g and calibrati with the excep Page n requirements document ar utual Recognit ion reports. ption of the c 58 of 111 s. The results re traceable tion Arrangem certificate on s of to ment p3 R T F D 0 - - C d M C d R P S M Report No. M1 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=10mm Maximum va Configur dx=4mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 20808_FCC_622 e: 8 Augu M120808 Lap u Tablet Qua 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =4mm, dz=2 alue = 11.31 extrapolated) 0.830 mW/g; lue of SAR ( 0 dB = 1.0 emperature perature 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum ust 2012 p Held OFDM attro with Ta m: OFDM 5 G sed: f = 5618 42; Probe: EX m 10.1; Serial annel 12 (interpolated) annel 12 .5mm 9 V/m; Pow e ) = 3.932 mW ; SAR(10 g) (measured) = 07 mW/g = 0 SA R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl M 5600 MHz aylor Peak 1 GHz 6 Mbs; F 8.8 MHz; σ = X3DV4 - SN : P 10.1; Ph a 4 Test/Ar ) = 1.07 mW 4 Test/Zo er Drift = 0.1 W/g = 0.211 m W = 1.84 mW/g 0.59 dB mW/ AR MEAS n accordanc e r measureme rds. NATA is of the equivale ly be reprodu Antenna B ( 11abgn and Frequency: 5 5.978 mho/m 3563; ConvF antom sectio rea Scan /g oom Sca 0 dB W/g g SUREMEN 20.8 20.5 37.0 e with NATA’s ents included a signatory to ence of testing uced in full, w 2) 08-08-12. Bluetooth; 5620 MHz; D m; ε r = 48.38 F(3.4, 3.4, 3. on: Flat 2.2 S n (91x121 n (9x9x9 NT PLOT Degrees Ce Degrees Ce % accreditatio n d in this d o the ILAC Mu g and calibrati with the excep .da52:0 Type: 6220 5 Duty Cycle: 1 84; ρ = 1000 4); Calibrat e Section x1): Measu )/Cube 0 T 16 elsius elsius Page n requirements document ar utual Recognit ion reports. ption of the c 5ANHMW; S :17.0451 kg/m 3 ed: 21/06/201 urement grid : Measurem 59 of 111 s. The results re traceable tion Arrangem certificate on Serial: WFM 12 d: dx=10mm, ent grid: s of to ment p3 : R Report No. M120808_FCC_622 205ANHMW_SAR This docume tests, calibr Australian/na for the mutua This docum R_5.6 ent is issued i ration and/or ational standar al recognition o ment shall onl n accordanc e r measureme rds. NATA is of the equivale ly be reprodu e with NATA’s ents included a signatory to ence of testing uced in full, w accreditatio n d in this d o the ILAC Mu g and calibrati with the excep Page n requirements document ar utual Recognit ion reports. ption of the c 60 of 111 s. The results re traceable tion Arrangem certificate on s of to ment p3 R T F D 0 - - C d M C d R P S M Report No. M1 Test Date File Name: M DUT: Fujitsu 00150064760 * Communi c * Medium pa - Electronics: - Phantom: F Configur dy=10mm Maximum va Configur dx=4mm, dy= Reference Va Peak SAR (e SAR(1 g) = 0 Maximum va Ambient T e Liquid Tem Humidity 20808_FCC_622 e: 8 Augu M120808 Lap u Tablet Qua 00 cation System arameters us : DAE3 Sn44 Flat Phantom ation/Ch lue of SAR ( ation/Ch =4mm, dz=2 alue = 13.51 extrapolated) 0.861 mW/g; lue of SAR ( 0 dB = 0.8 emperature perature 205ANHMW_SAR This docume tests, calibr A…

Text truncated - open the document above for the full version.

Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 83 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 APPENDIX C CALIBRATION DOCUMENTS 1. SN: 3563 Probe Calibration Certificate 2. SN: D5GHzV2 Dipole Calibration Certificate 3. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 84 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 85 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 86 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 87 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120808_FCC_62205ANHMW_SAR_5.6 Page 88 of 111 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the except…

Text truncated - open the document above for the full version.