EJE-WL0029INTEL 2205 ANHMW WLAN IN T732 / TH702 STYLISTIC

System Operating manual LIFEBOOK T732 Congratulations on your pu rchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. can be found on the Internet at:" http://www.fujitsu.com/fts/" For automatic driver updates, go to:"http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: " http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system! Published by Fujitsu Tec hnology Solutions Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact h ttp://www.fujitsu.com/fts/ Copyrigh t © Fujitsu Technology Solutions 2012. All rights reserved. Publication Date 10/12 Order No.: A26391-K368-Z320-1-7619, edition 1 LIFEBOOK T732 Operating manual Innovative technology7 Ports and controls9 Important notes12 First-time setup of your device15 Working with the notebook18 Security functions68 Connecting external devices75 Removing and installing components during servicing82 Settings in BIOS Setup Utility90 Troubleshooting and tips92 Technical data99 Manufacturer’s notes102 Index108 Remarks Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions. Trademarks Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Microsoft and Windows are trademarks orregistered trademarks of the Microsoft Corporation in the United States and/or other countries. Made under license from DTS Licensing Limited. DTS and the symbol are registered trademarks and & DTS Boost is a trademark of DTS, Inc. Product contains software. © DTS, Inc. All rights reserved. All other trademarks specified here are the property of their respective owners. Copyright No part of this publication may be copied, reproduced or translated without the prior written consent of Fujitsu. No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu. Contents Contents Innovativetechnology ................................................................. 7 Furtherinformation ...................................................................... 7 Notational conventions.................................................................. 8 Portsandcontrols ..................................................................... 9 Importantnotes ........................................................................ 12 Safetynotes ............................................................................ 12 Additional safety notes for devices with radio components . . . . .............................. 12 Energysaving .......................................................................... 13 Energy saving under Windows....................................................... 13 Travellingwithyournotebook ............................................................ 13 Beforeyoutravel ................................................................... 13 Notebook:transporting ............................................................... 14 Cleaningthenotebook .................................................................. 14 First-time setup o fyourdevice ......................................................... 15 Unpacking and che ckingthedevice ...................................................... 15 Selectingalocat ion ..................................................................... 16 Mains adapter con necting ............................................................... 16 Switchingonthe device for thefirsttime .................................................. 17 Workingwiththenotebook ............................................................ 18 Statusindicators ........................................................................ 18 Openingthenotebook ................................................................... 20 Switching on the notebook . . . ............................................................ 21 ProgrammingtheON/OFFswitch ..................................................... 21 Different ways to use your notebook . . .................................................... 22 From notebook to Tablet PC . ........................................................ 22 Selectdisplayorientation(portraitorlandscapeorientation) ............................. 24 FromTabletPCtonotebook .......................................................... 25 Switching off the notebook . . . ............................................................ 26 Closing the notebook . ................................................................... 27 Handwriting recognition under Windows 7 . . . . ............................................. 27 LCDscreen ............................................................................ 28 AmbientLightSensor ................................................................ 28 UsingadeviceasatabletPC ............................................................ 28 Usingfingers ....................................................................... 29 Usingthestyluspen ................................................................. 32 Usingthedeviceasanotebook .......................................................... 35 Touchpadandtouchpadbuttons ...................................................... 35 Keyboard ............................................................................... 37 Virtualnumerickeypad .............................................................. 39 Country and keyboard settings..................…

Text truncated - open the document above for the full version.

EMC Technologies Pty Ltd, 176 Harrick VIC 3043 Australia Ph: +613 9365 1000 Fax: +613 9331 7455 www.emctech.com.au EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road, Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] To: Federal Communications Commission and Industry Canada Attention: Certification Manager No. of pages: 1 From: Chieu Huynh Date: 13 th September 2012 EMC Ref: M120825_FCC_62205ANHMW Subject: FCC & IC APPROVAL – FCC ID: EJE-WL0029 (IC: 337J-WL0029) Please receive FCC/IC applications for review. The EUT is a STYLISTIC T Series, Model: T732 / TH702 with Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW. The Taylor Peak 2x2 WLAN module was originally certified by INTEL as a modular approval under FCC ID: PD962205ANH (Canada ID: 1000M-62205ANH). The other transmitter installed in the STYLISTIC T Series, Model: T732 / TH702 is Broadcom Bluetooth Module, Model: BCM92070MD_REF6. The Bluetooth module was originally certified by Broadcom as a modular approval under FCC ID: QDS-BRCM1043 (Canada ID: 4324A-BRCM1043). This Bluetooth preapproved module, is not co-located as the WLAN and Bluetooth antennas are >5cms apart. RF exposure and labeling will be addressed by Fujitsu according to FCC multi- transmitter and modular procedures. The intention of this application is to FCC/IC certify Intel Centrino Advanced-N 6205 (Taylor Peak 802.11a/b/g/n 2x2), Model: 62205ANHMW installed in STYLISTIC T Series, Model: T732 / TH702. EMC Technologies Pty Ltd is acting as agent for Fujitsu Ltd during this product approval. The FCC ID for this composite application is EJE-WL0029 and IC is 337J-WL0029 Regards ______________ Chieu Huynh Senior EMC Engineer EMC Technologies Pty Ltd

Intel Corporation 100 Center Point Cir. Columbia, SC 29210 September 9, 2010 Certification and Engineering Bureau Industry Canada P.O. Box 11490, Station H 3701 Carling Avenue (Building 94) Ottawa, Ontario K2H 8S2 Subject: Passive Scan, Client Device for IC: 1000M-62205ANH To Whom It May Concern, The IC: 1000M-62205ANH WLAN module operates as a Client device in the DFS LELAN bands. As a Client device the IC: 1000M-62205ANH will not transmit unless there is an approved Master devices operating. As a client device the WLAN module passively scans (listening) for a Master device and can not operate in ad-hoc mode. In the 5600 – 5650MHz band the IC: 1000M-62205ANH operates as stated above and will not transmit in this band as there will not any Master device operating in this band. If you have any questions, please do not to hesitate to contact me at 803-216-2344. Sincerely, ____________________________ Steven C. Hackett Wireless Product Regulatory Engineer Mobile Wireless Group Intel Corporation

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission - Authorization and Evaluation Division Industry Canada – Certification and Engineering Bureau Confidentiality Request regarding application for certification of FCC ID: EJE-WL0029 and IC ID: 337J-WL0029. Pursuant to FCC DA 04-1705, this application includes a request for short term confidentiality for the following exhibits: SAR Photos M120826_SAR_2.4_Appendix A_Photos SAR Photos M120826_SAR_5.6_Appendix A_Photos External Photos Appendix B1_External Photos Test Setup Photos Appendix B2_Test Setup Photos Location Photos Appendix B3_Location Photos Internal Photos Appendix B4_Internal Photos User Manual Appendix H_User Manual As the above information contains proprietary information which would be benefit to our competitors, we request that these exhibits be held from public view for 180 days from the issue date of the grant of approval. In addition, pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Operational Description CONF_Appendix C_62205ANHMW_OPDES Block Diagram CONF_Appendix D_62205ANHMW_BLKDIA Schematics CONF_Appendix E_62205ANHMW_SCHEM Antenna Details CONF_Appendix F_62205ANHMW_Antenna The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _____________________________ Tsuyoshi Uchihara Title : Engineer Date: 13 th September 2012

Intel Corporation 100 Center Point Circle Columbia, SC 29210 August 27, 2010 American TCB 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Subject: Model 62205ANHMW Wireless Lan PCIe Card FCC ID’s: PD962205ANH and PD962205ANH; IC: 1000M-62205ANH Gentlemen: Please be advised that the Model 62205ANHMW Wireless Lan PCIe card is manufactured for the global market but when marketed in North America under FCC ID’s PD962205ANH or PD962205ANHU and IC: 1000M-62205ANH the EEPROM will be programmed at the factory to only operate and actively scan on these specific channels: Channels 1-11, 2412-2462MHz 802.11b mode Channels 1-11, 2412-2462MHz 802.11g mode Channels 1-11, 2412-2462MHz 802.11n mode (20MHz channel) Channels 3-9, 2422-2452MHz 802.11n mode (40MHz channel) The following channels will be programmed at the factory to passively scan and will only listen and cannot send a probe request to initiate communication on these specific channels. Ad-hoc mode is always disabled on these passive channels. Channels 12 &13, 2467 & 2472MHz 802.11b mode Channels 12 &13, 2467 & 2472MHz 802.11g mode Channels 12 &13, 2467 & 2472MHz 802.11n mode (20/40MHz channel) Channels 36-48, 5180-5240MHz 802.11a mode Channels 36-48, 5180-5240MHz 802.11n mode (20 MHz channel) Channels 38-46, 5190-5230MHz 802.11n mode (40MHz channel) Channels 52-64, 5260-5320MHz 802.11a mode Channels 52-64, 5260-5320MHz 802.11n mode (20 MHz channel) Channels 54-62, 5270-5310MHz 802.11n mode (40MHz channel) Channels 100-140, 5500-5700MHz 802.11a mode Channels 100-140, 5500-5700MHz 802.11n mode (20 MHz channel) Channels 102-134, 5510-5670MHz 802.11n mode (40MHz channel) Channels 149-165, 5745-5825 802.11a mode Channels 149-165, 5745-5825MHz 802.11n mode (20 MHz channel) Channels151-159, 5755-5795 802.11n mode (40MHz channel) This information when programmed into the EEPROM will not be accessible and can not be changed by the end user. If you have any questions please do not hesitate to contact us at 803-216-2344. Sincerely, Steven C. Hackett Wireless Regulatory Engineer

FUJITSU LIMITED 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki 211-8588, Japan Tel : +81-44-754-3885 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 AUTHORITY TO ACT AS AGENT & FORM 731 SIGNATORY I appoint EMC Technologies Pty Ltd to act as agent, on our behalf in this application for equipment authorization. I certify that the exhibits submitted properly describe the device or system for which equipment authorization is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Commission’s regulations, will have affixed to it a label identical to that submitted for approval with this application. In addition, I authorize Mr. Chris Zombolas, Technical Director of EMC Technologies Pty Ltd to sign the Form 731 and Mr. Chieu Huynh (Senior EMC Test Engineer) to be listed as the technical and non-technical contact for this application. Sincerely, ____________________________ Name: Tsuyoshi Uchihara Title: Engineer Date: 25 th June 2012

FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B1 EXTERNAL PHOTOS

FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B3 LOCATION PHOTOS WLAN Location

FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS FCC ID: EJE-WL0029 (IC: 337J-WL0029) ______________________________________________________________________ EMC Technologies Pty. Ltd., 176 Harrick Road, Keilor Park, VIC, 3042, Australia. Phone: +61 3 9365 1000 Fax: +61 3 9331 7455 www.emctech.com.au APPENDIX B4 INTERNAL PHOTOS

Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 32 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. Table 23: 5200 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Bystander (25mm Spacing) 1 A 6 0 48 2 B 6 0 48 Lap Held 0 A 6 0 48 3 B 6 0 48 Edge On Secondary Portrait 0 A 6 0 48 Edge On Primary Portrait 4 B 6 0 48 Edge On Secondary Landscape 5 A 6 0 36 6 6 0 48 7 6 0 52 8 6 0 64 9 B 6 0 36 10 6 0 48 11 6 0 52 12 6 0 64 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 33 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Table 24: 5600 MHz Band SAR Measurement Plot Numbers Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Bystander (25mm Spacing) 13 A 6 0 116 14 B 6 0 116 Lap Held 0 A 6 0 116 15 B 6 0 116 Edge On Secondary Portrait 0 A 6 0 116 Edge On Primary Portrait 16 B 6 0 116 Edge On Secondary Landscape 17 A 6 0 104 18 6 0 116 19 6 0 124 20 6 0 136 21 B 6 0 104 22 6 0 116 23 6 0 124 24 6 0 136 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 34 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Table 25: 5800 MHz Band SAR Measurement Plot Numbers Table 26:System verification Plots Test Position Plot No. Ant Bit rate Mode (Mbps) Channel Bandwidth (MHz) Test Channel Bystander (25mm Spacing) 25 A 6 0 157 26 B 6 0 157 Lap Held 0 A 6 0 157 27 B 6 0 157 Edge On Secondary Portrait 0 A 6 0 157 Edge On Primary Portrait 28 B 6 0 157 Edge On Secondary Landscape 29 A 6 0 149 30 6 0 157 31 6 0 165 32 B 6 0 149 33 6 0 157 34 6 0 165 Plot 35 System verification 5800 MHz 24 th August 2012 Plot 36 System verification 5500 MHz 27 th August 2012 Plot 37 System verification 5500 MHz 28 th August 2012 Plot 38 System verification 5200 MHz 29 th August 2012 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 35 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Test Date: 29 August 2012 File Name: M120826 Bystander 25mm Spacing OFDM 5200 MHz (01.5dB) Antenna A (1) 29008012.da52:0 DUT: Fujitsu Tablet Turquise with Taylor Peak 11abgn and Bluetooth; Type: 62205ANHMW; Serial: WFM: 001500647600 * Communication System: OFDM 5 GHz 6 Mbs; Frequency: 5240 MHz; Duty Cycle: 1:17.0451 * Medium parameters used: f = 5242.6 MHz; σ = 5.478 mho/m; ε r = 47.586; ρ = 1000 kg/m 3 0 Electronics: DAE3 Sn442; Probe: EX3DV4 0 SN3563; ConvF(3.79, 3.79, 3.79); Calibrated: 21/06/2012 0 Phantom: Flat Phantom 10.1; Serial: P 10.1; Phantom section: Flat 2.2 Section Configuration/Channel 48 Test/Area Scan (81x101x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 0.111 mW/g Configuration/Channel 48 Test/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 3.124 V/m; Power Drift = 00.11 dB Peak SAR (extrapolated) = 0.350 mW/g SAR(1 g) = 0.063 mW/g; SAR(10 g) = 0.021 mW/g Maximum value of SAR (measured) = 0.132 mW/g 0 dB = 0.111 mW/g = 019.09 dB mW/g SAR MEASUREMENT PLOT 1 Ambient Temperature 20.8 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 35.0% Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 36 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 37 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Test Date: 29 August 2012 File Name: M120826 Bystander 25mm Spacing OFDM 5200 MHz Antenna B (2) 29008012.da52:0 DUT: Fujitsu Tablet Turquise with Taylor Peak 11abgn and Bluetooth; Type: 62205ANHMW; Serial: WFM: 001500…

Text truncated - open the document above for the full version.

Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 111 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 APPENDIX C CALIBRATION DOCUMENTS 1. SN: 3563 Probe Calibration Certificate 2. SN: D5GHzV2 Dipole Calibration Certificate 3. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 112 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 113 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 114 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 115 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 116 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 117 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 118 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 119 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3

Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 1 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 SAR Test Report Report Number: M120826_FCC_62205ANHMW_SAR_5.6 Test Sample: STYLISTIC T series tablet PC Radio Modules: WLAN INTEL CENTRINO ADVANCED,N 6205(TAYLOR PEAK) 62205ANHMW FCC ID: EJE,WL0029 IC: 337J,WL0029 Date of Issue: 13 th September 2012 EMC Technologies Pty Ltd reports apply only to the specific samples tested under stated test conditions. It is the manufacturer’s responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. EMC Technologies Pty Ltd shall have no liability for any deductions, inferences or generalisations drawn by the client or others from EMC Technologies Pty Ltd issued reports. This report shall not be used to claim, constitute or imply product endorsement by EMC Technologies Pty Ltd. EMC Technologies Pty Ltd ABN 82 057 105 549 176 Harrick Road Keilor Park Victoria Australia 3042 Ph: + 613 9365 1000 Fax: + 613 9331 7455 email: [email protected] Report No. M120826_FCC_62205ANHMW_SAR_5.6 Page 2 of 139 This document is issued in accordance with NATA’s accreditation requirements. The results of tests, calibration and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document shall only be reproduced in full, with the exception of the certificate on p3 CONTENTS 1.0 GENERAL INFORMATION ............................................................................................................. 3 2.0 INTRODUCTION .............................................................................................................................. 4 3.0 TEST SAMPLE TECHNICAL INFORMATION ............................................................................... 5 3.1 DUT (WLAN) Details ............................................................................................................... 5 3.2 DUT (Notebook PC) Details.................................................................................................... 7 3.3 Test sample Accessories ........................................................................................................ 7 3.3.1 Battery Types ...................................................................................................................... 7 4.0 TEST SIGNAL, FREQUENCY AND OUTPUT POWER ................................................................. 8 4.1 Battery Status ......................................................................................................................... 8 5.0 DETAILS OF TEST LABORATORY ............................................................................................... 9 5.1 Location .................................................................................................................................. 9 5.2 Accreditations ......................................................................................................................... 9 5.3 Environmental Factors ............................................................................................................ 9 6.0 DESCRIPTION OF SAR MEASUREMENT SYSTEM .............................…

Text truncated - open the document above for the full version.