ELIRTX3080RTX3080

1 Table of Contents WELCOME.........................................................................................................................................2 BOX CONTENTS...............................................................................................................................4 AT A GLANCE...................................................................................................................................5 Handset............................................................................................................................................5 Gateway...........................................................................................................................................7 GETTING STARTED.........................................................................................................................8 Prerequisites.....................................................................................................................................8 How to Install the Gateway..............................................................................................................9 How to Install and Register the Handset.......................................................................................10 How to Configure the DUALphone...............................................................................................11 Recommended Basic Settings........................................................................................................13 QUICK GUIDE.................................................................................................................................15 TROUBLESHOOTING.....................................................................................................................17 WELCOME......................................................................................................................................2 BOX CONTENTS..........................................................................................................................4 AT A GLANCE...............................................................................................................................5 Handset..........................................................................................................................................5 Gateway.........................................................................................................................................7 GETTING STARTED...................................................................................................................8 Prerequisites.................................................................................................................................8 How to Install the Gateway......................................................................................................9 How to Install and Register the Handset.............................................................................10 How to Configure the DUALphone.....................................................................................11 Recommended Basic Settings................................................................................................13 QUICK GUIDE.............................................................................................................................15 TROUBLESHOOTING..............................................................................................................17 2 WELCOME Thank you for purchasing the LAN Cordless DUALphone. This guide describes how to install the LAN Cordless DUALphone, enabling you to make Internet calls, landline calls and use onscreen information services. Included in this guide is also a brief description of the basic functions of the DUALphone and a troubleshooting section. Note that throughout this guide, we refer to the LAN Cordless DUALphone as DUALphone. For detailed information about the features of the DUALphone refer to the User Manual on our website. On the website you can also find out how to contact product support. www.dualphone.net/lan Have your serial number and MAC address ready when contacting support. You find the numbers on the bottom of the gateway. For matters concerning telephony services, contact your Internet Telephony Service Provider. For matters concerning your broadband connection, contact your Internet Service Provider (ISP), and for matters concerning Onscreen Information Services contact your Information Service Provider. For EU: Conformity of the telephone to EU directives is confirmed by the CE symbol. Hereby, we declare that the LAN Cordless DUALphone and/or LAN Cordless DUALhandset are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For US: This equipment complies with Part 15 of the FCC rules and Part 68 of the FCC rules, and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). Located on the equipment is a label that contains, among other information, the FCC registration number, and ringer equivalence number (REN.) If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0) To be certain of the number of devices that may be connected to the line, as determined by the total REN's, contact the telephone company to determine the maximum REN for the calling area. This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in …

Text truncated - open the document above for the full version.

ENGLISH ■ 33 USER MANUAL FCC AND OTHER INFORMATION This equipment complies with Parts 68 of the FCC rules and the requirements adopted by the Adminis- trative Council for Terminal Attachments (ACTA). A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant tele- phone cord and modular plug is provided with this product. It is designed to be connected to a compat- ible modular jack that is also compliant. See installation instructions for details. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual. This equipment may not be used with Coin Telephone Lines or with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualifi ed installer. This device complies with part 15 of the FCC rules. Operation is subject to the following two condi- tions: (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet or on a circuit different from that to which the receiver is con- nected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF EXPOSURE WARNING To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided. Caution: To maintain compliance with the FCC’s RF exposure guidelines, the internal antennas used for this mobile transmitter (Base unit) must provide a separation distance of at least 20 cm from all persons. Base and Handset must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. ENGLISH ■ 34 USER MANUAL RIGHTS OF THE TELEPHONE COMPANY Should your equipment cause trouble on your line which may harm the telephone network, the tele- phone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practical and the circumstances warrant such action, the telephone company may temporarily disconnect service immediately. In case of such temporary discontinuance, the telephone company must: 1. Promptly notify you of such temporary discontinuance; 2. Afford you the opportunity to correct the situation; 3. Inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide ad- vance notice in order for you to make necessary modifi cations to maintain uninterrupted service. PRODUCT IDENTIFIER AND REN INFORMATION The label on the back or bottom of this equipment contains, among other things, an identifi er indicating product approval and the Ringer Equivalence Number (REN). This information must be provided to your local telephone company upon request. For equipment approved prior to July 23, 2001, the product identifi er is preceded by the phrase “FCC Reg No.” and the REN is listed separately. For equipment approved after that date, the product identifi er is preceded by “US” and a colon (:), and the REN is en- coded in the product identifi er without a decimal point as the sixth and seventh characters following the colon. For example, the product identifi er US:AAAEQ03T123XYZ would indicate an REN of 0.3. The REN is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. In most, but not all areas, the sum of all RENs should be fi ve (5.0) or less. OTHER NOTES: • This equipment may not be used on coin service provided by the telephone company. • Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. • If your home has specially wired alarm equipment connected to the telephone line, ensure the instal- lation of this cordless phone does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualifi ed installer. • Notice must be given to the telephone…

Text truncated - open the document above for the full version.

1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 1 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH UPCS (DECT based) – Implementation Conformance Statement Description : Gateway RTX3080 Model : RTX3080 Use : FP PP Repeater System Type HW version Ver 4 SW version Ver 4.0 RFPI / PIN Decl. emission BW 1.4 MHz Decl. lower threshold DUT Decl.upper threshold 1) -62.4 dBm Product information Standard: FCC part 15D other: Frequency band: 1920 – 1930 MHz other: Number of RF channels: 5 Number of logical channels: 60 (time and spectrum windows) Used slot type: single double Used slot(s): even odd For doubleslot connection even and odd slots are used Operating mode: simplex duplex other: 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 2 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Antennas: Antenna Type Gain [dBi] internal external 1 PCB 0 2 PCB 0 3 FP: Do Tx and Rx use the same antenna(s)?: Yes No Antenna Type Gain [dBi] internal external 1 2 3 PP: Do Tx and Rx use the same antenna(s)?: Yes No Antenna diversity: 1) Diversity supported Antenna Tx Rx 1 2 FP 3 1 2 Product information PP 3 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 3 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Supply and supported temperature ranges (Manufacturer declaration): FP PP Repeater U normal [V] 12.0 V U min [V] 9.0 V U max [V] 20.0 V T min [°C] 0 T max [°C] +55 Power Source Type Manufacturer FP or WRS Wall adaptor A31230 Ontop PP (charger) Data connection: PSTN other Cordless telephone with LAN connection for VoIP Used radio module 1) : Type : Manufacturer : Ancillary equipment 1) : Description : Type : Manufacturer : Product information Host device 1) : Description : Type : Manufacturer : 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 4 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Control software 1) : Name : Version : Manufacturer : Product information Additional remarks: 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 5 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH FCC 15.323 (c) (5): This device or group of co-operating devices located within 1 meter of each other shall not during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively more than one third of the time and spectrum windows defined by the system. Manufacturer agrees: Yes No FCC 15.323 (c) (12): This device shall not use the provisions of (c) (10) or (c) (11) to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Manufacturer agrees: Yes No FCC 15.307 (b): The applicant is a participating member of UTAM, Inc. and will provide a related affidavit from UTAM, Inc. in course of certification. Confirmation by applicant: Yes No FCC 15.319 (f) Automatic discontinuation of transmission: This device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. Automatic break off the transmissions means break off of connection and break of transmissions which are not control and signalling information or repetitive codes of complete frame or burst intervals. In case of devices using basics of DECT technology at least fixed parts and repeaters are using control and signalling information without direct connection to their remote station. Please fill in the table below with the reaction of the EUT (FP and/or PP) using A, B or C. Reaction of EUT Situation FP PP Verdict 1 Switch-off counter part B 2 Hook-on by counter part B 3 Switch-off by EUT A 4 Hook-on at EUT side Not possible 5 Remove power from EUT A 6 Remove power from counterpart B Manufacturer declarations A – Connection break down, cease of transmit B – Connection break down, EUT transmits signalling information C – Connection break down, counter part transmits signalling information 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_GW page 6 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Supplement Additional remarks: Declared by: Date: Name (print): Signature:

1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 1 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH UPCS (DECT based) – Implementation Conformance Statement Description : Handset RTX3080 Model : RTX3080 Use : FP PP Repeater System Type HW version Ver 4 SW version Ver 4.0 RFPI / PIN Decl. emission BW 1.4 MHz Decl. lower threshold -82.4 dBm DUT Decl.upper threshold 1) - 62.4 dBm Product information Standard: FCC part 15D other: Frequency band: 1920 – 1930 MHz other: Number of RF channels: 5 Number of logical channels: 60 (time and spectrum windows) Used slot type: single double Used slot(s): even odd For doubleslot connection even and odd slots are used Operating mode: simplex duplex other: 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 2 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Antennas: Antenna Type Gain [dBi] internal external 1 2 3 FP: Do Tx and Rx use the same antenna(s)?: Yes No Antenna Type Gain [dBi] internal external 1 PCB 0 2 PCB 0 3 PP: Do Tx and Rx use the same antenna(s)?: Yes No Antenna diversity: 1) Diversity supported Antenna Tx Rx 1 2 FP 3 1 2 Product information PP 3 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 3 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Supply and supported temperature ranges (Manufacturer declaration): FP PP Repeater U normal [V] 2.4 V U min [V] 2.1 V U max [V] 2.8 V T min [°C] 0 T max [°C] +55 Power Source Type Manufacturer FP or WRS PP (charger) Charger RTX3080 / wall adapter A30650 RTX America Inc./ Ontop Data connection: PSTN other Used radio module 1) : Type : Manufacturer : Ancillary equipment 1) : Description : Type : Manufacturer : Product information Host device 1) : Description : Type : Manufacturer : 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 4 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Control software 1) : Name : Version : Manufacturer : Product information Additional remarks: 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 5 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH FCC 15.323 (c) (5): This device or group of co-operating devices located within 1 meter of each other shall not during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively more than one third of the time and spectrum windows defined by the system. Manufacturer agrees: Yes No FCC 15.323 (c) (12): This device shall not use the provisions of (c) (10) or (c) (11) to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Manufacturer agrees: Yes No FCC 15.307 (b): The applicant is a participating member of UTAM, Inc. and will provide a related affidavit from UTAM, Inc. in course of certification. Confirmation by applicant: Yes No FCC 15.319 (f) Automatic discontinuation of transmission: This device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. Automatic break off the transmissions means break off of connection and break of transmissions which are not control and signalling information or repetitive codes of complete frame or burst intervals. In case of devices using basics of DECT technology at least fixed parts and repeaters are using control and signalling information without direct connection to their remote station. Please fill in the table below with the reaction of the EUT (FP and/or PP) using A, B or C. Reaction of EUT Situation FP PP Verdict 1 Switch-off counter part A 2 Hook-on by counter part Not possible 3 Switch-off by EUT A 4 Hook-on at EUT side A 5 Remove power from EUT A 6 Remove power from counterpart A Manufacturer declarations A – Connection break down, cease of transmit B – Connection break down, EUT transmits signalling information C – Connection break down, counter part transmits signalling information 1) if applicable rev. 1.4 UPCS_DECTbased_ICS_PP page 6 (6) -ETS- Dr. Genz GmbH, Germany Storkower Straße 38c D-15526 Reichenwalde b. Berlin Telephone: +49.33631.888.00 Fax: +49.33631.888.640 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH Supplement Additional remarks: Declared by: Date: Name (print): Signature:

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 1 of 12 Appendix A. Pictures ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 2 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 3 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 4 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 5 of 12

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 1 of 15 Appendix A. Pictures ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 2 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 3 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 6 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 7 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 8 of 15

Label for Handset RTX3080 RTX3080 Model: RTX3080.32 FCC ID: ELIRTX3080 I.T.E E253011 ! HAC 1:1 Label for Gateway RTX3080 Privacy of communications may not be ensured when using this phone. Complies with 47 CFR part 68. FCC ID: ELIRTX3080 US: ELIIP07BRTX3080 REN: 0.7B For indoor use only. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RTX3080 Model: RTX3080.103 I.T.E E253011 INPUT: 12V 300mA Use only powersupply recommended by the manufacturer S/N: MAC: HAC ! 1:1 RTX Telecom A/S Ref. : kl Doc. : RTX3080_LABELS Date : 03-Nov-2005 Page : 1 of 1 page(s)

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 6 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 7 of 12 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730 Page 8 of 12

ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 4 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 5 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 9 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 10 of 15 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731 Page 11 of 15

ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730-C-2 Page 38 of 58 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.12 Radio frequency radiation exposure; FCC 15.319(i) Consideration of radio frequency radiation exposure for EUT is done as SAR test acc. IEEE 1528 MPE calculation as below SAR test results: not applicable MPE calculation: Please find radiated power test results in Appendix J. The EUT is considered as a mobile device according to OET Bulletin 65, Edition – 97 – 01. Therefore distance to human body of min. 20 cm is determined. The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A safety statement concerning minimum separation distances from enclosure of the device will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RFE exposure compliance. The limit of Power density for General Population / Uncontrolled Exposure is 1.0 mW/cm 2 . Formula: S = EIRP / 4πR 2 Calculation: EIRP Radiated Power [dBm] 20.93 EIRP Radiated Power [mW] 123.88 R Distance [cm] 20 S Power Density [mW/cm 2 ] 0.025 Result: The EUT complies with the radio frequency radiation exposure requirement. Comment: For radiated power test results see Appendix J.

ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9730-C-1 Page 38 of 58 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 3.12 Radio frequency radiation exposure; FCC 15.319(i) Consideration of radio frequency radiation exposure for EUT is done as SAR test acc. IEEE 1528 MPE calculation as below SAR test results: not applicable MPE calculation: Please find radiated power test results in Appendix J. The EUT is considered as a mobile device according to OET Bulletin 65, Edition – 97 – 01. Therefore distance to human body of min. 20 cm is determined. The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A safety statement concerning minimum separation distances from enclosure of the device will be integrated in the user’s manual to provide end-users with transmitter operating conditions for satisfying RFE exposure compliance. The limit of Power density for General Population / Uncontrolled Exposure is 1.0 mW/cm 2 . Formula: S = EIRP / 4πR 2 Calculation: EIRP Radiated Power [dBm] 20.93 EIRP Radiated Power [mW] 123.88 R Distance [cm] 20 S Power Density [mW/cm 2 ] 0.025 Result: The EUT complies with the radio frequency radiation exposure requirement. Comment: For radiated power test results see Appendix J.

ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH TEST - REPORT SAR Compliance Test Report Test report no.: G0M20508-9731-S-8 SAR ELECTRONIC TECHNOLOGY SYSTEMS STORKOWER STRASSE 38C, D-15526 REICHENWALDE B. BERLIN DR. GENZ GMBH PHONE +49-33631-888 00 FAX +49-33631-888 660 ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731-S-8 Page 1 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH TABLE OF CONTENTS 1 General information 1.1 Notes 1.2 Testing laboratory 1.3 Details of approval holder 1.4 Manufacturer 1.5 Application details 1.6 Test item 1.7 Test results 1.8 Test standards 2 Technical test 2.1 Summary of test results 2.2 Test environment 2.3 Test equipment utilized 2.4 Definitions 2.5 Measurement system description 2.6 Test system specification 2.7 Measurement procedure 2.8 Reference points 2.9 Test positions 2.10 Measurement uncertainty 3 Tissue and system verification 3.1 Tissue verification 3.2 System verification 4 Test Results 5 References 6 Appendix ETS Dr. Genz GmbH, Germany Registration number: G0M20508-9731-S-8 Page 2 of 25 ELECTRONIC TECHNOLOGY SYSTEMS DR.GENZ GMBH 1 General Information 1.1 Notes The purpose of conformity testing is to increase the probability of adherence to the essential requirements or conformity specifications, as appropriate. The complexity of the technical specifications, however, means that full and thorough testing is impractical for both technical and economic reasons. Furthermore, there is no guarantee that a test sample which has passed all the relevant tests conforms to a specification. The existence of the tests nevertheless provides the confidence that the test sample possesses the qualities as maintained and that is performance generally conforms to representative cases of communications equipment. The test results of this test report relate exclusively to the item tested as specified in 1.5. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the ELECTRONIC TECHNOLOGY SYSTEMS DR. GENZ GMBH. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualification of all persons taking them. Tester: 07.09.2005 Mr. Handrik Date ETS-Lab. Name Signature Technical responsibility for area of testing: 07.09.2005 N. Kaspar Date ETS Name Signature ETS Dr. Genz GmbH, Germany …

Text truncated - open the document above for the full version.