EMOHDL50AHotel Bluetooth Universal Speaker System for iPad, iPhone and iPod

-1 +1 auto DST time settime zonetime sync DC 12V 3.5A HDL50A Sta Quick Start Guide Included • HDL50A system • 100V-240V universal AC adaptor Set Up Connect AC adaptor to DC jack/wall outlet Remove pull tab from Backup Battery Compartment located on bottom of the unit. When Low Battery Icon appears on display, replace backup battery with 1 fresh CR2450 battery. Keep unit connected to AC power when replacing battery or you will lose settings. Remove thumbscrew and remove back cover to access sta controls Secure the attached Security Tether to a wall or other permanent surface. CAUTION: DO NOT attach to an AC outlet or cause it to become entangled with anything that can create a hazardous situation. 12V 3.5A outlet The unit ships with the Daylight Saving Time (DST) switch in Auto position, and will automatically adjust when the time changes in March and November. Setting Clock Using Time Sync Daylight Saving Time a) Connect a Lightning-compatible iPhone to the Dock Press the Time Sync Button on the back of the unit to instantly set the time on the HDL50A. b NOTE: For the fastest, most accurate time setting, set the clock using Time Sync with a) a docked iPhone OR b) an iPhone connected to the USB port iPhone time is always current because it pings off cell towers; iPad or iPod are only accurate to the last time they were synced to a computer. Make sure the DST switch is in AUTO position. If you do not have an iPhone or if time sync fails, set the clock manually. b) connect any iPhone to the USB port using the USB cable that came with the iPhone -1 +1 auto DST time sync a snooze/dimmer function talk endpoweriPod/USB/radio Bluetooth/line-in alarm on/o wake-to FM presets alarm set pairing 1- place your device into “discoverable” mode 2- press and hold“pairing” button on unit for 2 sec 3- if prompted, enter code “0000” 4- your device is now paired. You can answer and end calls by pressing “talk” and “end” to use Bluetooth 1- press “alarm set” button 2- use </> to set desired wake-up time 3- press “alarm set” button again to confirm 4- press “wake-to” button to switch between waking to your iPod, USB dock, radio, or buzzer to use alarm Or Manual Clock Setting Press the Time Set Button Press the Time Set Button Press the or button to set time Press the or button to set year Press the or button to set date Press the or button to tune to a desired station (hold to search for next clear station) time set Press and hold the Time Set Button to enter clock setting mode 2 SECS time set 2 SECS time set Press the Time Set Button to conrm Clock Setting time set Beep Beep FM Radio FM Presets Maintenance alarm set Press function Button as needed to cycle to FM mode function iPod/USB/radio Bluetooth/line-in Press FM presets Button to cycle to the preset (P1- P6) you wish to set Press FM presets Button to conrm Follow steps above to set all 6 FM presets Extend FM antenna for best reception Once sta has completed setup, replace security cover on back of unit and tighten thumbscrew. Beep Beep Press the or button to select station to preset FM presets Press and hold FM presets Button to conrm preset number FM presets FM presets HDL50A Quick Start Guide - Front Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost) HDL50A Quick Start Guide - Inside Size: 432 x 140 mm Printing Color: Black Mat’l: 100 gsm WF paper May 30, 13. (For Finemost) HDL50AQSG-053013-A © 2013 HTI Industries, LLC. All rights reserved Printed in China • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. WARNING: Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, re, or high temperatures. Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or store with hazardous or combustible materials. Store in cool, dry, ventilated area. Follow applicable laws and regulations for transport and disposal. NOTE: Time display can be set to 12 or 24 hours at any time during clock setting To toggle time display between 12 or 24 hours, press the alarm set button during clock setting Clock Setting

Neutron Engineering Inc. Project No.: 1305C078 Page 2 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 3 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 4 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 5 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 6 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 7 of 22

Model: HDL50A Frequency Range : FM 87.5 - 107.9 MHz Clock Backup: DC 3V, CR2450 x 1 AC Adaptor: DC 12V 3.5A Service No: HDL50-B-A Mfd & Serviced by HTI Industries LLC www.hoteltech.com Toll Free: 1-888-744-6835 Made in China Patents: www.ihomeaudio.com/patents FCC ID: EMOHDL50A IC: 986B-HDL50A HDL50A Model plate Color: PMS 428C text on Black background Jun. 27, 13. Label position & FCC/IC statement

Neutron Engineering Inc. Project No.: 1305C078 Page 8 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 9 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 10 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 11 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 12 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 13 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 14 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 15 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 16 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 17 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 18 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 19 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 20 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 21 of 22 Neutron Engineering Inc. Project No.: 1305C078 Page 22 of 22

Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 1 of 103 FCC/IC Radio Test Report FCC ID: EMOHDL50A IC: 986B-HDL50A This report concerns (check one): Original Grant Class II Change Issued Date : Jun. 03, 2013 Project No. : 1305C078 Equipment : Hotel Bluetooth Universal Speaker System for iPad, iPhone and iPod. Model Name for FCC : HDL50A; HDL50; HDL50B; HDL50X (“X” denote as color of cabinet) Model Name for IC : HDL50A Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: May. 13, 2013 Date of Test: May. 13, 2013 ~ May. 31, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 2 of 103 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 3 of 103 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 31 5 . NUMBER OF HOPPING CHANNEL 55 5.1 APPLIED PROCEDURES / LIMIT 55 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 5.1.2 TEST PROCEDURE 55 5.1.3 DEVIATION FROM STANDARD 55 5.1.4 TEST SETUP 55 5.1.5 EUT OPERATION CONDITIONS 55 5.1.6 TEST RESULTS 56 6 . AVERAGE TIME OF OCCUPANCY 58 Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 4 of 103 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 58 6.1.1 MEASUREMENT INSTRUMENTS LIST 58 6.1.2 TEST PROCEDURE 58 6.1.3 DEVIATION FROM STANDARD 58 6.1.4 TEST SETUP 59 6.1.5 EUT OPERATION CONDITIONS 59 6.1.6 TEST RESULTS 60 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 72 7.1 APPLIED PROCEDURES / LIMIT 72 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 72 7.1.2 TEST PROCEDURE 72 7.1.3 DEVIATION FROM STANDARD 72 7.1.4 TEST SETUP 72 7.1.5 EUT OPERATION CONDITIONS 72 7.1.6 TEST RESULTS 73 8 . BANDWIDTH TEST 77 8.1 APPLIED PROCEDURES / LIMIT 77 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 77 8.1.2 TEST PROCEDURE 77 8.1.3 DEVIATION FROM STANDARD 77 8.1.4 TEST SETUP 77 8.1.5 EUT OPERATION CONDITIONS 77 8.1.6 TEST RESULTS 78 9 . PEAK OUTPUT POWER TEST 82 9.1 APPLIED PROCEDURES / LIMIT 82 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 9.1.2 TEST PROCEDURE 82 9.1.3 DEVIATION FROM STANDARD 82 9.1.4 TEST SETUP 82 9.1.5 EUT OPERATION CONDITIONS 82 9.1.6 TEST RESULTS 83 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 87 10.1 APPLIED PROCEDURES / LIMIT 87 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 87 10.1.2 TEST PROCEDURE 87 10.1.3 DEVIATION FROM STANDARD 87 10.1.4 TEST SETUP 87 10.1.5 EUT OPERATION CONDITIONS 87 10.1.6 TEST RESULTS 88 11 . EUT TEST PHOTO 100 Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 5 of 103 1. CERTIFICATION Equipment : Hotel Bluetooth Universal Speaker System for iPad, iPhone and iPod. Brand Name : iHome Model Name for FCC : HDL50A; HDL50; HDL50B; HDL50X (“X” denote as color of cabinet) Model Name for IC : HDL50A Applicant : SDI TECHNOLOGIES INC. Factory : DONGGUAN FINEMOST ELECTRONICS CO., LTD Address : No.46,Shangxing Road, Shangjiao District, Chang-An Town, Dongguan City Date of Test : May. 13, 2013 ~ May. 31, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 RSS-GEN Issue 3, Dec 2010 The above equipment has been tested and found compliance with the requiremen…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 100 of 103 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 101 of 103 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1305C078 Page 103 of 103 Radiated Measurement Photos Above 1000MHz