EMOIBN180NFC Bluetooth Wireless FM Clock Radio with USB Charging, NFC Bluetooth Alarm Clock with USB Charging

iBN18 instruction manual iBN18 Eng IB Size: 153mm x 120mm Printing color: Black Nov 04, 2013 P1 NFC Bluetooth Dual Alarm Clock with USB Charging iBN18 Introduction Thank you for purchasing the iHome iBN18. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. This unit features NFC (Near Field Communication) technology which allows you to wirelessly connect your NFC–enabled device to instantly ‘pair and play’. See your device’s user manual for details on how to interact with NFC devices. If your Bluetooth device does not support NFC, you can pair it manually with this unit. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. P2 1 iBN18 P3 2 FCC ID: EMOIBN180 IC: 986B-IBN180 QDID:B020770 FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC Statement This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. 11/04/2013 Énoncé FCC Déclaration de la FCC relative à l'exposition aux radiations Cet équipement est conforme aux limites d'exposition aux radiations de la FCC RF fixées pour un environnement non contrôlé. 2 FCC ID:EMOIBN180 IC:986B-IBN180 QDID:B020770 iBN18 P3 • Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour la conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil. • REMARQUE : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15 de la règlementation FCC. Ces limites sont conçues pour offrir une protection raisonnable contre les interférences nocives d'une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie qu'une interférence ne prendra pas place dans une installation particulière. Si cet équipement ne cause pas d'interférence nocive à la réception de la radio ou du téléviseur, ce qui peut être déterminé en allumant et fermant l'équipement, l'utilisateur est encouragé à tenter de corriger l'interférence en utilisant l'un ou l'autre des moyens suivants : • Réorientez ou resituez l'antenne de réception. • Augmentez la séparation entre l'équipement et le récepteur. • Branchez l'équipement dans une prise d'un circuit différent que celui dans lequel est branché le récepteur. • Consultez le marchand ou un technicien expérimenté en radio/téléviseur pour obtenir de l'aide. CAN ICES-3 (B)/NMB-3(B) Déclaration d'Industrie Canada (IC) Cet appareil satisfait aux exigences d'Industrie Canada, prescrites dans le document RSS-210. Son fonctio…

Text truncated - open the document above for the full version.

iBN180 instruction manual iBN180 Eng IB Size: 153mm x 120mm Printing color: Black Oct 07, 2013 P1 NFC Bluetooth Wireless FM Clock Radio with USB Charging iBN180 Introduction Thank you for purchasing the iHome iBN180. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. This unit features NFC (Near Field Communication) technology which allows you to wirelessly connect your NFC–enabled device to instantly ‘pair and play’. See your device’s user manual for details on how to interact with NFC devices. If your Bluetooth device does not support NFC, you can pair it manually with this unit. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. P2 1 iBN180 P3 2 FCC ID: EMOIBN180 IC: 986B-IBN180 QDID:B020770 FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC Statement This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. FCC ID:EMOiBN180 IC:986B-iBN180 QDID:B020770 iBN180 P3 • Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour la conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil. • REMARQUE : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15 de la règlementation FCC. Ces limites sont conçues pour offrir une protection raisonnable contre les interférences nocives d'une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie qu'une interférence ne prendra pas place dans une installation particulière. Si cet équipement ne cause pas d'interférence nocive à la réception de la radio ou du téléviseur, ce qui peut être déterminé en allumant et fermant l'équipement, l'utilisateur est encouragé à tenter de corriger l'interférence en utilisant l'un ou l'autre des moyens suivants : • Réorientez ou resituez l'antenne de réception. • Augmentez la séparation entre l'équipement et le récepteur. • Branchez l'équipement dans une prise d'un circuit différent que celui dans lequel est branché le récepteur. • Consultez le marchand ou un technicien expérimenté en radio/téléviseur pour obtenir de l'aide. CAN ICES-3 (B)/NMB-3(B) Déclaration d'Industrie Canada (IC) Cet appareil satisfait aux exigences d'Industrie Canada, prescrites dans le document RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) l'appareil ne doit pas causer d'interférences, et (2) il doit accepter toute interférence, y compris celles risquant d'engendrer un fonctionn…

Text truncated - open the document above for the full version.

Model Declaration Letter Date: 2013‐11‐14 We, the undersigning company Company Name: SDI Technologies Inc Address: 1299 Main Street, Rahway, New Jersey 07065, U.S.A Hereby confirm that the following product(s): Product description: NFC Bluetooth Wireless FM Clock Radio with USB Charging（for iBN180） NFC Bluetooth Alarm Clock with USB Charging （for iBN18） Type designation: iBN180; iBN18; Brand: iHome That All versions of the Model iBN180; iBN18 are electrically equal and only the product name differs because of marketing purpose. In addition, the iBN180 has the function of FM and only as a receiver, but the iBN18 does not have the FM function. Company Name: SDI Technologies Inc Address: 1299 Main Street, Rahway, New Jersey 07065, U.S.A Telephone: 732 574‐9000 E‐mail: [email protected]

Neutron Engineering Inc. Project No.: 1310C026 Page 6 of 24 Model: iBN18

Neutron Engineering Inc. Project No.: 1310C026 Page 2 of 24 Model: iBN180 Neutron Engineering Inc. Project No.: 1310C026 Page 3 of 24

iBN180 Back View iBN18 Back View iBN18 Top ViewiBN180 Top View Close this opening ALM. RESET DC 1.5V "AAA" UM-4, LR3 SIZE DC 1.5V "AAA" UM-4, LR3 SIZE OPEN ALM. RESET iBN18iBN180 CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. iBN18/iBN180 bottom engraving 0.4mm Sclae : 1:1 Aug 27, 03. AC Adaptor: DC 7.5V, 2A Clock Battery : DC 3V, “AAA” (LR3) Size x 2 Batteries Service No: iBN18-A-A Model: iBN18 Model: iBN18 without FM radio Mfd & Serviced by SDI Technologies Inc. www.ihome.com Toll Free: 1-800-288-2792 Patents: www.ihome.com/patents Made in China FCC ID: EMOIBN180 IC: 986B-IBN180 Frequency Range : FM 87.5 - 107.9 MHz FM 76 - 90 MHz (for Japan only) AC Adaptor: DC 7.5V, 2A Clock Battery : DC 3V, “AAA” (LR3) Size x 2 Batteries Service No: iBN180-A-A Model: iBN180 Model: iBN180 Mfd & Serviced by SDI Technologies Inc. www.ihome.com Toll Free: 1-800-288-2792 Patents: www.ihome.com/patents Made in China FCC ID: EMOIBN180 IC: 986B-IBN180

Neutron Engineering Inc. Project No.: 1310C026 Page 17 of 24 Model: iBN18 Neutron Engineering Inc. Project No.: 1310C026 Page 18 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 19 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 20 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 21 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 22 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 23 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 24 of 24

Neutron Engineering Inc. Project No.: 1310C026 Page 9 of 24 Model: iBN180 Neutron Engineering Inc. Project No.: 1310C026 Page 10 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 11 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 12 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 13 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 14 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 15 of 24 Neutron Engineering Inc. Project No.: 1310C026 Page 16 of 24

Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 1 of 112 FCC&IC Radio Test Report FCC ID: EMOIBN180 IC: 986B-IBN180 This report concerns (check one): Original Grant Class II Change Issued Date : Oct. 24, 2013 Project No. : 1310C026 Equipment : NFC BT Wireless FM Clock Radio with USB Charging NFC Bluetooth Alarm Clock with USB Charging Model Name for FCC : iBN180;iBN180X(“X” denote as color of cabinet) iBN18;iBN18X; (“X” denote as color of cabinet) Model Name for IC : iBN180 iBN18 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Oct. 10, 2013 Date of Test: Oct. 10, 2013~ Oct. 23, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 2 of 112 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 3 of 112 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 21 4.2.1 RADIATED EMISSION LIMITS 21 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 22 4.2.3 TEST PROCEDURE 23 4.2.4 DEVIATION FROM TEST STANDARD 23 4.2.5 TEST SETUP 24 4.2.6 EUT OPERATING CONDITIONS 25 4.2.7 TEST RESULTS (BELOW 30MHZ) 26 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 27 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 40 5 . NUMBER OF HOPPING CHANNEL 64 5.1 APPLIED PROCEDURES / LIMIT 64 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 64 5.1.2 TEST PROCEDURE 64 5.1.3 DEVIATION FROM STANDARD 64 5.1.4 TEST SETUP 64 5.1.5 EUT OPERATION CONDITIONS 64 5.1.6 TEST RESULTS 65 6 . AVERAGE TIME OF OCCUPANCY 67 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 4 of 112 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 67 6.1.1 MEASUREMENT INSTRUMENTS LIST 67 6.1.2 TEST PROCEDURE 67 6.1.3 DEVIATION FROM STANDARD 67 6.1.4 TEST SETUP 68 6.1.5 EUT OPERATION CONDITIONS 68 6.1.6 TEST RESULTS 69 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 81 7.1 APPLIED PROCEDURES / LIMIT 81 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 81 7.1.2 TEST PROCEDURE 81 7.1.3 DEVIATION FROM STANDARD 81 7.1.4 TEST SETUP 81 7.1.5 EUT OPERATION CONDITIONS 81 7.1.6 TEST RESULTS 82 8 . BANDWIDTH TEST 86 8.1 APPLIED PROCEDURES / LIMIT 86 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 86 8.1.2 TEST PROCEDURE 86 8.1.3 DEVIATION FROM STANDARD 86 8.1.4 TEST SETUP 86 8.1.5 EUT OPERATION CONDITIONS 86 8.1.6 TEST RESULTS 87 9 . PEAK OUTPUT POWER TEST 91 9.1 APPLIED PROCEDURES / LIMIT 91 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 91 9.1.2 TEST PROCEDURE 91 9.1.3 DEVIATION FROM STANDARD 91 9.1.4 TEST SETUP 91 9.1.5 EUT OPERATION CONDITIONS 91 9.1.6 TEST RESULTS 92 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 96 10.1 APPLIED PROCEDURES / LIMIT 96 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 96 10.1.2 TEST PROCEDURE 96 10.1.3 DEVIATION FROM STANDARD 96 10.1.4 TEST SETUP 96 10.1.5 EUT OPERATION CONDITIONS 96 10.1.6 TEST RESULTS 97 11 . EUT TEST PHOTO 109 Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 5 of 112 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FICP-1-1310C026 Original Issue. Oct. 24, 2013 - - - Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 6 of 112 1. CERTIFICATION Equipment : NFC BT Wireless FM Clock Radio with USB Charging NFC Bluetooth Alarm Clock with USB Charging Model Name for FCC : iBN180;iBN180X(“X” denote as color of cabinet) iBN18;iBN18X; (“X” denote as color of cabinet) Model Name for IC : iBN180 iBN18 Brand Name : iHome Applicant : SDI TECHNOLOGIES INC. Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Factory : DongGuan Synst Electronics CO. Ltd. Address : The Science&Technology Industrial Park ,Houjie Town, DongGuan, China Date of T…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 109 of 112 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 110 of 112 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 111 of 112 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1310C026 Page 112 of 112 Radiated Measurement Photos Above 1000MHz