EMOIBN20Bluetooth Wireless FM Clock Radio with USB Charging

iBN20 instruction manual iBN20 Eng IB Size: 153mm x 120mm Printing color: Black Apr 29, 2013 P1 Bluetooth Wireless FM Clock Radio with USB Charging iBN20 Introduction Thank you for purchasing the iHome iBN20. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P2 Maintenance iBN20 FCC Information P3 FCC ID: EMOiBN20 IC: 986B-iBN20 • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference received, including interference that may cause undesired operation iBN20 Table of Contents Meet Your iBN20.......................................................................................................... 1-3 The Display/Setting Up the Unit .......................................................................................... 4 Setting the Clock/ FM Radio .............................................................................................. 5 Setting and Using FM Presets .............................................................................................. 6 Setting and Using the Alarm/Previewing Alarm ...................................................................... 7 Snooze/Dimmer Button/Sleep and Nap Modes FM Radio/ ................................................... 8 Using Bluetooth: Pairing Your Device ................................................................................... 9 Playing Audio Via Bluetooth/Playing Audio Via Aux-in ........................................................... 10 Charging Devices via USB Port ........................................................................................ 11 Using FM Radio in Other Countries.................................................................................... 11 Replacing/Installing Backup Batteries ................................................................................. 12 Troubleshooting .............................................................................................................. 13 Consumer Product Safety Guide ................................................................................... 14-15 Warranty...................................................................................................................... 16 P4 iBN20 1 P5 Included • iBN20 system • 100V-240V universal AC adaptor • 3.5mm audio cable power adaptor audio cableiBN20 iBN20 P6 Meet Your iBN20 Top Nap/ Clock Set Button Mode Button Power Button Minus/ Plus Settings Buttons Volume Down Button Volume Up Button Play/ Pause and Presets Button Sleep Button Snooze/ Dimmer Button Alarm Button 2 DC Jack Backup Battery Compartment (pull battery tab before use) USB Charging Port Aux-in Jack iBN20 P7 Meet Your iBN20 Back Bottom Pairing Button Antenna 3 iBN20 Using the Setting Up the Unit The Display Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. 4 P8 Alarm Active Indicator FM Mode Indicator Aux-in Mode Indicator Snooze Mode Indicator Bluetooth Audio Indicator Bluetooth Pairing Indicator PM/AM Indicators Wake to Alarm Source Indicators: Tone, Radio, Bluetooth device Time Display Low Backup Battery Indicator RESET RESET TEST TEST iBN20 Using the 5 Setting the Clock FM Radio P9 1. Press and hold the N…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1303C238 Page 2 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 3 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 4 of 12

iBN20 Battery Door and Bottom panel engraving 0.3mm Apr 30, 2013 iBN20 Battery Compartment engraving 0.3mm Apr 30, 2013 (no engraving in battery compartment) position for model plate will provide AW after rating conrm iBN20 model plate Print:White Material: PET sheet (black) May 3, 2013 Model: iBN20 iBN20-A-A EMOIBN20 986B-IBN20

Neutron Engineering Inc. Project No.: 1303C238 Page 5 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 6 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 7 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 8 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 9 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 10 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 11 of 12 Neutron Engineering Inc. Project No.: 1303C238 Page 12 of 12

Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 1 of 103 FCC/IC Radio Test Report FCC ID: EMOIBN20 IC: 986B-IBN20 This report concerns (check one): Original Grant Class II Change Issued Date : Apr. 11, 2013 Project No. : 1303C238 Equipment : Bluetooth Wireless FM Clock Radio with USB Charging Model Name for FCC : iBN20; iBN20B; iBN20BX; iBN20X; iBN19; iBN19B; iDN19BX; iBN19X; iBT20; iBT20B; iBT20BX; iBT20X; iBT19; iBT19B; iBT19BX; iBT19X (“X” denote as color of cabinet) Model Name for IC : iBN20 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Mar. 26, 2013 Date of Test: Mar. 26, 2013 ~ Apr. 10, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 2 of 103 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 3 of 103 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 31 5 . NUMBER OF HOPPING CHANNEL 55 5.1 APPLIED PROCEDURES / LIMIT 55 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 55 5.1.2 TEST PROCEDURE 55 5.1.3 DEVIATION FROM STANDARD 55 5.1.4 TEST SETUP 55 5.1.5 EUT OPERATION CONDITIONS 55 5.1.6 TEST RESULTS 56 6 . AVERAGE TIME OF OCCUPANCY 58 Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 4 of 103 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 58 6.1.1 MEASUREMENT INSTRUMENTS LIST 58 6.1.2 TEST PROCEDURE 58 6.1.3 DEVIATION FROM STANDARD 58 6.1.4 TEST SETUP 59 6.1.5 EUT OPERATION CONDITIONS 59 6.1.6 TEST RESULTS 60 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 72 7.1 APPLIED PROCEDURES / LIMIT 72 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 72 7.1.2 TEST PROCEDURE 72 7.1.3 DEVIATION FROM STANDARD 72 7.1.4 TEST SETUP 72 7.1.5 EUT OPERATION CONDITIONS 72 7.1.6 TEST RESULTS 73 8 . BANDWIDTH TEST 77 8.1 APPLIED PROCEDURES / LIMIT 77 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 77 8.1.2 TEST PROCEDURE 77 8.1.3 DEVIATION FROM STANDARD 77 8.1.4 TEST SETUP 77 8.1.5 EUT OPERATION CONDITIONS 77 8.1.6 TEST RESULTS 78 9 . PEAK OUTPUT POWER TEST 82 9.1 APPLIED PROCEDURES / LIMIT 82 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 9.1.2 TEST PROCEDURE 82 9.1.3 DEVIATION FROM STANDARD 82 9.1.4 TEST SETUP 82 9.1.5 EUT OPERATION CONDITIONS 82 9.1.6 TEST RESULTS 83 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 87 10.1 APPLIED PROCEDURES / LIMIT 87 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 87 10.1.2 TEST PROCEDURE 87 10.1.3 DEVIATION FROM STANDARD 87 10.1.4 TEST SETUP 87 10.1.5 EUT OPERATION CONDITIONS 87 10.1.6 TEST RESULTS 88 11 . EUT TEST PHOTO 100 Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 5 of 103 1. CERTIFICATION Equipment : Bluetooth Wireless FM Clock Radio with USB Charging Brand Name : iHome Model Name for FCC : iBN20; iBN20B; iBN20BX; iBN20X; iBN19; iBN19B; iDN19BX; iBN19X; iBT20; iBT20B; iBT20BX; iBT20X; iBT19; iBT19B; iBT19BX; iBT19X (“X” denote as color of cabinet) Model Name for IC : iBN20 Applicant : SDI TECHNOLOGIES INC. Factory : SHENZHEN ZOWEE TECHNOLOGY CO., LTD. BAOAN SUBSIDIARY CO. Address : ZOWEE Factory, Tongfuyu Industrial Zone, Songgang, Baoan District, Shenzhen 518055 Date of Test : Mar. 26, 2013 ~ Apr. 10, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 100 of 103 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 101 of 103 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 102 of 103 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1303C238 Page 103 of 103 Radiated Measurement Photos Above 1000MHz