EMOIBT154ABluetooth Wireless LED Color Changing Speaker, Rechargeable Battery

iBT154 - Instruction Sheet - English Color: Black text on white paper (1C + 1C) Size: 102 W x 150 H mm Material: 85gsm wood free paper Feb 16, 2020 CHARGING THE SPEAKER iBT154_010220-A Printed in China © 2020 SDI Technologies, Inc. All rights reserved iBT154 For questions, full instructions, warranty, and additional safety information, please scan the QR code or visit: www.ihome.com/help/ibt154 FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B) / NMB-3(B), IC Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment Tout changement ou modification non expressément approuvé par la partie responsable de la conformité pourrait annuler le droit de l'utilisateur à utiliser l'équipement WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below: • Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations. • Many electronics retailers now recycle batteries and other electronic components at no charge GENERAL BATTERY PRECAUTIONS • Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. • Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit). • Never expose a battery to any liquid. • Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. • Always keep batteries out of the reach of infants and small children. IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1 Clean only with dry cloth. 2 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4 Only use attachments/accessories specified by the manufacturer. 5 Unplug this product during lightning storms or when unused for long periods of time. 6 Damage Requiring Service – This product should be serviced by qualified service personnel when: - Plug has been damaged. - Objects have fallen into or liquid has been spilled into the enclosure. - The unit has been exposed to rain. The unit has been dropped or the enclosure damaged. - The unit exhibits a marked chang…

Text truncated - open the document above for the full version.

Rev11/20/07 SDITECHNOLOGIESINC. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:EMOIBT154A PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription Block SCH OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName ManualUsermanual Sincerely, DavidStetin 2020-03-25

SDITechnologiesInc. Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodel numberandcolorofappearance. ProductionnameTrademarkFCCModelno. BluetoothWirelessLED ColorChangingSpeaker, RechargeableBattery iHomeEMOIBT154A iBT154,iBT154B,iBT154Q, iBT154R,iBT154X(Xwouldbe 1or2alphabet(s)combination denotedifferentcabinetcolor) Confirmedby: DavidStetin 2020-03-25

E:\ED200103042EES200103045KIDiBT780FCCID\work\POA_Letter_140225.docx SDITECHNOLOGIESINC. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2020/03/25 SUBJECT:FCCApplicationfor(FCCID:EMOIBT154A) ToWhomItMayConcern: We,theundersigned,herebyauthorizeEMTEK(DONGGUAN)CO.,LTD.atSamLv onourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment. AnyandallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshall havethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, DavidStetin 2020-03-25

FCCID:EMOIBT154A

Title: Bluetooth Portable Mono Speaker Version: 3 Designer: Nick Silvestri Date: 01/16/20 Model #: iBT154 GAW MAGENTA- Silkscreen *FOLLOW /DL COLOR SPECIFIED PRINT FOR ALL PRINTED ICONS ON PRODUCT. BLUE - deboss/glossy 0.2mm Inside of Jack-Cover Date code M o d e l : i B T 1 5 4 I P 6 7 I n p u t : 5 V 1 0 0 0 m A w w w . i H o m e . c o m / p a t e n t s C A N I C E S - 3 ( B ) / N M B - 3 ( B ) D e s i g n e d i n t h e U S A M a d e i n C h i n a Jack Panel PC sheet (See DL for color guidelines) iBT154 Jack Panel PC sheet (See DL for color guidelines) F C C I D : E M O I B T 1 5 4 A I C : 9 8 6 B - I B T 1 5 4 A S / N : i B T 1 5 4 - A - A H V I N : i B T 1 5 4 a M a n u f a c t u r e d a n d S e r v i c e d b y S D I T e c h n o l o g i e s I n c .

FCCID:EMOIBT154A ANT

RFEXPOSUREEVALUATION EUTSpecification EUTBluetoothWirelessLEDColorChangingSpeaker, RechargeableBattery ModelNumberiBT154,iBT154B,iBT154Q,iBT154R,iBT154X(Xwouldbe 1or2alphabet(s)combinationdenotedifferentcabinet color) FCCIDEMOIBT154A Antennagain(Max)0dBi OperationFrequency2402-2480MHz InputRatingDC5Vfromadapter,DC3.7VBattery ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 KindofDevice:BluetoothVer.5.0 ModulationBT:(GFSK,π/4-DQPSK,8DPSK) Max.outputpowerBT:2.43dBm(0.001750W) TestRequirement: Accordingto§15.247(i)and§1.1307(b)(1),systemsoperatingunderthe provisionsofthissectionshallbeoperatedinamannerthatensuresthatthe publicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualityforTCBapproval. OneantennaisavailablefortheEUT.Theminimumseparationdistanceis 5mm. BTDSS: Transmit Frequency (MHz) Mode Measure dPower (dBm) Tune upPower (dBm) Maxtuneup power(dBm) Calculation Result 1-g SAR 2.402GFSK2.432±130.61846703 2.441GFSK1.031±120.49523793 2.480GFSK-0.560±110.39651153 2.402 Π/4-DQ PSK -0.820±100.30996773 2.441 Π/4-DQ PSK 1.321±120.49523793 2.480 Π/4-DQ PSK -0.220±110.39651153 2.4028DPSK-0.440±110.39022633 2.4418DPSK1.51±120.49523793 2.4808DPSK1.761±120.49917853 AccordingtoKDB447498,nostand-alonerequiredforBTantenna,andno simultaneousSARmeasurementisrequired. Signature: SamLv Date:2020-03-25

Report No. ES200226005EPage 1 of 80 Ver.1.0 TEST REPORT Product Name ： Bluetooth Wireless LED Color Changing Speaker, Rechargeable Battery Model Number ： iBT154, iBT154B, iBT154Q, iBT154R, iBT154X (X would be 1 or 2 alphabet(s) combination denote different cabinet color) FCC ID ： EMOIBT154A Prepared for:SDI Technologies Inc. Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Prepared by:EMTEK (SHENZHEN) CO., LTD. Address:Building 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number:ES200226005E Date(s) of Tests:February 26, 2020 to March 20, 2020 Date of issue:March 20, 2020 Report No. ES200226005EPage 2 of 80 Ver.1.0 VERIFICATION OF COMPLIANCE Applicant: SDI Technologies Inc 1299, Main Street, Rahway, NJ 07065, U.S.A. Manufacturer: SDI Technologies Inc 1299, Main Street, Rahway, NJ 07065, U.S.A. Factory:TOP TEAM IDEREK (SHAOGUAN) LIMITED GAOJILING, TAIPING TOWN, SHIXING COUNTY, SHAO GUAN CITY, GUANGDONG PROVINCE, CHINA, China Product Description: Bluetooth Wireless LED Color Changing Speaker, Rechargeable Battery Trade Mark:iHome Model Number: iBT154, iBT154B, iBT154Q, iBT154R, iBT154X (X would be 1 or 2 alphabet(s) combination denote different cabinet color) (note: The models are the same except color of appearance and model number, here we prepare iBT154 for the all test) We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2018). Date of Test: February 26, 2020 to March 20, 2020 Prepared by: Loren Luo /Editor Reviewer: Tim Dong /Supervisor Approved & Authorized Signer : Lisa Wang /Manager Report No. ES200226005EPage 3 of 80 Ver.1.0 Modified Information VersionSummaryRevision DateReport No. Ver.1.0Original Report/ES200226005E Report No. ES200226005EPage 4 of 80 Ver.1.0 Table of Contents 1. GENERAL INFORMATION............................................................................................................6 1.1 PRODUCTDESCRIPTION..............................................................................................................................6 1.2 TESTMETHODOLOGY..................................................................................................................................7 1.3 TESTFACILITY.............................................................................................................................................8 2. SYSTEM TEST CONFIGURATION.............................................................................................9 2.1 EUT CONFIGURATION.................................................................................................................................9 2.2 EUT EXERCISE............................................................................................................................................9 2.3 TESTPROCEDURE.......................................................................................................................................9 2.4 CONFIGURATION OFTESTEDSYSTEM......................................................................................................10 3. SUMMARY OF TEST RESULTS................................................................................................11 4. DESCRIPTION OF TEST MODES.............................................................................................12 5. TEST SYSTEM UNCERTAINTY.................................................................................................13 6. CONDUCTED EMISSIONS TEST..............................................................................................14 6.1 MEASUREMENTPROCEDURE:...................................................................................................................14 6.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)..........................................................................14 6.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................14 6.4 MEASUREMENTRESULT:...........................................................................................................................15 6.5 CONDUCTEDMEASUREMENTPHOTOS:....................................................................................................18 7. RADIATED EMISSION TEST.....................................................................................................19 7.1 MEASUREMENTPROCEDURE....................................................................................................................19 7.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION).........................................................................21 7.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................22 7.4 RADIATEDEMISSIONLIMIT........................................................................................................................23 7.5 MEASUREMENTRESULT............................................................................................................................24 7.5 RADIATEDMEASUREMENTPHOTOS:........................................................................................................29 8. CHANNEL SEPARATION TEST................................................................................................30 8.1 MEASUREMENTPROCEDURE....................................................................................................................30 8.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)................................................................…

Text truncated - open the document above for the full version.

FCCID:EMOIBT154A