EMOIBT24Portable Rechargeable Bluetooth Speaker

iBT24 instruction manual iBT24 IB Size: 153mm x 120mm Printing color: Black Jan 25, 2013 100gsm2 WF ( P1 Portable Rechargeable Bluetooth Speaker iBT24 Introduction Thank you for purchasing the iHome iBT24. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P2 Maintenance iBT24 FCC Information P3 FCC ID: EMOIBT24 IC: 986B-IBT24 QDID:B020568 • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. Jan 25, 2013 iBT24 Table of Contents Meet Your iBT24...........................................................................................................1-2 Charging the Unit.............................................................................................................3 Using Bluetooth:Pairing Your Device.....................................................................................4 Playing Audio Via Bluetooth................................................................................................5 Playing Audio Via Aux.......................................................................................................6 Internal Rechargeable Lithium-ion Battery...............................................................................7 Consumer Product Safety Guide.......................................................................................8-9 Troubleshooting..............................................................................................................10 Warranty......................................................................................................................11 P4 iBT24 1 IBT24 System USB charging cableAudio cable Included • iBT24 system • Micro USB to USB charging cable • 3.5mm stereo audio cable P5 iBT24 2 P6 Meet Your iBT24 Power On/Off Switch Bluetooth Pairing Button Aux-in Jack Reset port Aux-out Jack Power/Charging/Pairing Indicator Light Micro USB Charging Port Back Front iBT24 Using the Charging the Unit 1. Connect the micro USB plug to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, charge unit for about 3 hours. 3. A red light glows steadily while the unit is charging and turns OFF once the unit is fully charged. If unit is not powered on when micro USB plug is connected, the red light glows steadily to indicate unit is charging. 3 P7 NOTE: When unit is on and not connected to power source, the red light will slowly flash for a short time (10 times each minute) to indicate the battery needs charging. USB 2.0 iBT24 Using the 4 P8 Using Bluetooth: Pairing Your Device For First Time use (auto pairing): 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Move the Power ON/OFF Switch on the unit to the ON position (right). The first time the unit is turned on it will enter auto pairing mode, indicated by a rapidly flashing blue light. “iHome iBT24” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, tap on “iHome iBT24“ to complete pairing. If your device …

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1301C058 Page 2 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 3 of 9

Charging voltage: DC 3.7V, 2000mAH Service Nbr: iBT24-A-A Mfd & Serviced by SDI Technologies Inc. www.ihomeaudio.com Toll Free: 1-800-288-2792 Patents: www.ihomeaudio.com/patents Model: iBT24 FCC ID: EMOIBT24 IC: 986B-IBT24 MADE IN CHINA IBT24 Model plate Jan 07, 2012 color: black background, white type PVC cut sheet This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Neutron Engineering Inc. Project No.: 1301C058 Page 4 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 5 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 6 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 7 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 8 of 9 Neutron Engineering Inc. Project No.: 1301C058 Page 9 of 9

Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 1 of 110 FCC/IC Radio Test Report FCC ID: EMOIBT24 IC: 986B-IBT24 This report concerns (check one) : Original Grant Class II Change Issued Date : Jan. 31, 2013 Project No. : 1301C058 Equipment : Portable Rechargeable Bluetooth Speaker Model Name for FCC : iBT24; iBT24X (“X” denote as color of cabinet) Model Name for IC : iBT24 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jan. 07, 2013 Date of Test: Jan. 07, 2013 ~ Jan. 31, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 2 of 110 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 3 of 110 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 19 4.2.1 RADIATED EMISSION LIMITS 19 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 20 4.2.3 TEST PROCEDURE 21 4.2.4 DEVIATION FROM TEST STANDARD 21 4.2.5 TEST SETUP 22 4.2.6 EUT OPERATING CONDITIONS 23 4.2.7 TEST RESULTS (BELOW 30MHZ) 24 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 25 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 38 5 . NUMBER OF HOPPING CHANNEL 62 5.1 APPLIED PROCEDURES / LIMIT 62 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 62 5.1.2 TEST PROCEDURE 62 5.1.3 DEVIATION FROM STANDARD 62 5.1.4 TEST SETUP 62 5.1.5 EUT OPERATION CONDITIONS 62 5.1.6 TEST RESULTS 63 6 . AVERAGE TIME OF OCCUPANCY 65 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 4 of 110 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 65 6.1.1 MEASUREMENT INSTRUMENTS LIST 65 6.1.2 TEST PROCEDURE 65 6.1.3 DEVIATION FROM STANDARD 65 6.1.4 TEST SETUP 66 6.1.5 EUT OPERATION CONDITIONS 66 6.1.6 TEST RESULTS 67 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 79 7.1 APPLIED PROCEDURES / LIMIT 79 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 79 7.1.2 TEST PROCEDURE 79 7.1.3 DEVIATION FROM STANDARD 79 7.1.4 TEST SETUP 79 7.1.5 EUT OPERATION CONDITIONS 79 7.1.6 TEST RESULTS 80 8 . BANDWIDTH TEST 84 8.1 APPLIED PROCEDURES / LIMIT 84 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 84 8.1.2 TEST PROCEDURE 84 8.1.3 DEVIATION FROM STANDARD 84 8.1.4 TEST SETUP 84 8.1.5 EUT OPERATION CONDITIONS 84 8.1.6 TEST RESULTS 85 9 . PEAK OUTPUT POWER TEST 89 9.1 APPLIED PROCEDURES / LIMIT 89 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 89 9.1.2 TEST PROCEDURE 89 9.1.3 DEVIATION FROM STANDARD 89 9.1.4 TEST SETUP 89 9.1.5 EUT OPERATION CONDITIONS 89 9.1.6 TEST RESULTS 90 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 94 10.1 APPLIED PROCEDURES / LIMIT 94 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 94 10.1.2 TEST PROCEDURE 94 10.1.3 DEVIATION FROM STANDARD 94 10.1.4 TEST SETUP 94 10.1.5 EUT OPERATION CONDITIONS 94 10.1.6 TEST RESULTS 95 11 . EUT TEST PHOTO 107 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 5 of 110 1. CERTIFICATION Equipment : Portable Rechargeable Bluetooth Speaker Brand Name : iHome Model Name for FCC : iBT24; iBT24X (“X” denote as color of cabinet) Model Name for IC : iBT24 Applicant : SDI TECHNOLOGIES INC. Factory : SHENZHEN ZOWEE TECHNOLOGY CO., LTD. BAOAN SUBSIDIARY CO. Address : ZOWEE Factory, Tongfuyu Industrial Zone, Songgang, Baoan District, Shenzhen 518055 Date of Test : Jan. 07, 2013 ~ Jan. 31, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data,…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 107 of 110 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 108 of 110 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 109 of 110 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C058 Page 110 of 110 Radiated Measurement Photos Above 1000MHz