EMOIBT25Portable Stereo Bluetooth Speaker

iBT25 instruction manual iBT25 IB Size: 153mm x 120mm Printing color: Black Dec 14, 2012. P1 Bluetooth Wireless Stereo Speaker System with USB Charging iBT25 Introduction Thank you for purchasing the iHome iBT25. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P2 Maintenance iBT25 FCC Information P3 FCC ID: EMOIBT25 IC: 986B-IBT25 QDID:B020415 • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-102 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. 12/14/2012 Information FCC Déclaration de la FCC relative à l'exposition aux radiations Cet équipement est conforme aux limites d'exposition aux radiations de la FCC RF fixées pour un environnement non contrôlé. Ce transmetteur ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou un autre transmetteur. Cet appareil est conforme à la norme RSS-102 de la règlementation d'Industrie Canada ; son utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles (2) Ce dispositif doit accepter toute interférence reçue, incluant l'interférence causée par une opération non désirée. Cet appareil répond aux critères d'exemption des limites d'évaluation courante indiquées à la section 2.5 de la norme RSS 102 et de conformité aux expositions aux radiofréquences de la norme RSS 102 ; les utilisateurs peuvent obtenir des informations sur l'exposition aux radiofréquences et la conformité au Canada. iBT25 FCC ID: EMOIBT25 IC: 986B-IBT25 QDID:B020415 • Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour la conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil. • REMARQUE : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15 de la règlementation FCC. Ces limites sont conçues pour offrir une protection raisonnable contre les interférences nocives d'une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie qu'une interférence ne prendra pas place dans une installation particulière. Si cet équipement ne cause pas d'interférence nocive à la réception de la radio ou du téléviseur, ce qui peut être déterminé en allumant et fermant l'équipement, l'utilisateur est encouragé à tenter de corriger l'interférence en utilisant l'un ou l'autre des moyens suivants : • Réorientez ou resituez l'antenne de réception. • Augmentez la séparation entre l'équipement et le récepteur. • Branchez l'équipement dans une prise d'un circuit différent que celui dans lequel est branché le récepteur. • Consultez le marchand ou un technicien expérimenté en radio/téléviseur pour obtenir de l'aide. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada Cet appareil est con…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1212C023 Page 2 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 3 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 4 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 5 of 12

This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw o conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IW5 FCC Bottom panel Engraving: 0.4mm Nov 28, 2011 Model: iBT25 AC Adaptor: DC 12V, 2A Service No: iBT25-A-A Mfd & Serviced by SDI Technologies Inc. www.ihomeaudio.com Toll Free: 1-800-288-2792 Made in China Patents: www.ihomeaudio.com/patents iBT25 model plate Dec 14, 2012 material: 0.3 RoHs material thickness color: black background + grey type FCC ID: EMOIBT25 IC: 986B-IBT25

Neutron Engineering Inc. Project No.: 1212C023 Page 6 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 7 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 8 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 9 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 10 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 11 of 12 Neutron Engineering Inc. Project No.: 1212C023 Page 12 of 12

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 1 of 129 FCC/IC Radio Test Report FCC ID: EMOIBT25 IC: 986B-IBT25 This report concerns (check one) : Original Grant Class II Change Issued Date : Dec. 19, 2012 Project No. : 1212C023 Equipment : Portable Stereo Bluetooth Speaker Model Name for FCC : iBT25; iBT25X (“X” denote as color of cabinet) Model Name for IC : iBT25 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Dec. 05, 2012 Date of Test: Dec. 05, 2012 ~ Dec. 18, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 2 of 129 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 3 of 129 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 20 4.2.1 RADIATED EMISSION LIMITS 20 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 21 4.2.3 TEST PROCEDURE 22 4.2.4 DEVIATION FROM TEST STANDARD 22 4.2.5 TEST SETUP 23 4.2.6 EUT OPERATING CONDITIONS 24 4.2.7 TEST RESULTS (BELOW 30MHZ) 25 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 26 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 45 5 . NUMBER OF HOPPING CHANNEL 81 5.1 APPLIED PROCEDURES / LIMIT 81 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 81 5.1.2 TEST PROCEDURE 81 5.1.3 DEVIATION FROM STANDARD 81 5.1.4 TEST SETUP 81 5.1.5 EUT OPERATION CONDITIONS 81 5.1.6 TEST RESULTS 82 6 . AVERAGE TIME OF OCCUPANCY 84 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 4 of 129 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 84 6.1.1 MEASUREMENT INSTRUMENTS LIST 84 6.1.2 TEST PROCEDURE 84 6.1.3 DEVIATION FROM STANDARD 84 6.1.4 TEST SETUP 85 6.1.5 EUT OPERATION CONDITIONS 85 6.1.6 TEST RESULTS 86 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 98 7.1 APPLIED PROCEDURES / LIMIT 98 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 98 7.1.2 TEST PROCEDURE 98 7.1.3 DEVIATION FROM STANDARD 98 7.1.4 TEST SETUP 98 7.1.5 EUT OPERATION CONDITIONS 98 7.1.6 TEST RESULTS 99 8 . BANDWIDTH TEST 103 8.1 APPLIED PROCEDURES / LIMIT 103 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 103 8.1.2 TEST PROCEDURE 103 8.1.3 DEVIATION FROM STANDARD 103 8.1.4 TEST SETUP 103 8.1.5 EUT OPERATION CONDITIONS 103 8.1.6 TEST RESULTS 104 9 . PEAK OUTPUT POWER TEST 108 9.1 APPLIED PROCEDURES / LIMIT 108 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 108 9.1.2 TEST PROCEDURE 108 9.1.3 DEVIATION FROM STANDARD 108 9.1.4 TEST SETUP 108 9.1.5 EUT OPERATION CONDITIONS 108 9.1.6 TEST RESULTS 109 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 113 10.1 APPLIED PROCEDURES / LIMIT 113 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 113 10.1.2 TEST PROCEDURE 113 10.1.3 DEVIATION FROM STANDARD 113 10.1.4 TEST SETUP 113 10.1.5 EUT OPERATION CONDITIONS 113 10.1.6 TEST RESULTS 114 11 . EUT TEST PHOTO 126 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 5 of 129 1. CERTIFICATION Equipment : Portable Stereo Bluetooth Speaker Brand Name : iHome Model Name for FCC : iBT25; iBT25X (“X” denote as color of cabinet) Model Name for IC : iBT25 Applicant : SDI TECHNOLOGIES INC. Factory : SHENZHEN ZOWEE TECHNOLOGY CO., LTD. BAOAN SUBSIDIARY CO. Address : ZOWEE Factory, Tongfuyu Industrial Zone, Songgang, Baoan District, Shenzhen 518055 Date of Test : Dec. 05, 2012 ~ Dec. 18, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. Th…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 126 of 129 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 127 of 129 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 128 of 129 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C023 Page 129 of 129 Radiated Measurement Photos Above 1000MHz