EMOIBT31Bluetooth Wireless FM Clock Radio with USB Charging

iBT31 instruction manual iBT31 Eng IB Size: 153mm x 120mm Printing color: Black July 15, 2014 P1 Bluetooth Wireless FM Clock Radio with USB Charging Questions? Contact Customer Service at 1-800-288-2792 EMBED COVER ART OF iBT31 iBT31 Introduction Thank you for purchasing the iHome iBT31. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. 1 P2 Maintenance iBT31 P3 2 FCC ID: EMOIBT31 IC: 986B-IBT31 QDID:B0XXXXX FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. iBT31 Table of Contents 3 Meet Your iBT31 ..............................................................................................................5 The Display/Setting Up the Unit ..........................................................................................6 Setting the Clock .............................................................................................................7 Setting and Using the Alarm/Previewing Alarm .................................................................. 7- 8 FM Radio/Setting and Using FM Presets...............................................................................9 Using FM Radio in Other Countries....................................................................................10 ZZZ (Snooze)/Display Dimmer Button/Sleep Mode .............................................................10 Using Bluetooth: Pairing Your Device .................................................................................11 Pairing with a Different Device .........................................................................................11 Playing Audio Via Bluetooth..............................................................................................12 Using the Speakerphone feature ........................................................................................12 Playing Audio Via Aux-in .................................................................................................13 Charging Devices via USB Port .........................................................................................14 Replacing/Installing Backup Batteries .................................................................................15 Troubleshooting ..............................................................................................................16 Consumer Product Safety Guide ................................................................................... 17-18 Warranty...........................................…

Text truncated - open the document above for the full version.

Project No.: 1407C237 Page 2 of 12 Project No.: 1407C237 Page 3 of 12 Project No.: 1407C237 Page 4 of 12 Project No.: 1407C237 Page 5 of 12 Project No.: 1407C237 Page 6 of 12

Battery Info, FCC Info: embossed 0.3mm iBN31 Model Plate: Cut PVC Sheet, matte nish see DL for color DC 1.5V LR6, UM-3, AA SIZE DC 1.5V LR6, UM-3, AA SIZE AA x 2 FM 87.5 - 107.9 MHz DC 3V, AA x 2 DC 5V, 3A iBT31-A-A Frequency Range: Clock Backup: AC Adaptor: Service Number: Manufactured and Serviced by SDI Technologies Inc. Patents: www.ihome.com/patents Toll Free: 1-800-288-2792 Made in China www.ihome.com FCC ID: EMOIBT31 IC: 986B-IBT31 8/07/2014

Project No.: 1407C237 Page 7 of 12 Project No.: 1407C237 Page 8 of 12 Project No.: 1407C237 Page 9 of 12 Project No.: 1407C237 Page 10 of 12 Project No.: 1407C237 Page 11 of 12 Project No.: 1407C237 Page 12 of 12

Report No.: BTL-FICP-1-1407C237 Page 1 of 108 FCC&IC Radio Test Report FCC ID: EMOIBT31 IC: 986B- IBT31 This report concerns (check one): Original Grant Class II Change Project No. : 1407C237 Equipment : Bluetooth Wireless FM Clock Radio with USB Charging Model Name for FCC : iBT31; iBT31x (“X” =A‐Z, denote as color of cabinet) Model Name for IC : iBT31 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Date of Receipt : Aug. 06, 2014 Date of Test : Aug. 06, 2014~ Aug. 21, 2014 Issued Date : Aug. 25, 2014 Tested by : BTL Inc. Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FICP-1-1407C237 Page 2 of 108 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a m utual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FICP-1-1407C237 Page 3 of 108 Table of Contents Page 1 . CERTIFICATION 7 2 . SUMMARY OF TEST RESULTS 8 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 14 4 . EMC EMISSION TEST 15 4.1 CONDUCTED EMISSION MEASUREMENT 15 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 15 4.1.2 TEST PROCEDURE 15 4.1.3 DEVIATION FROM TEST STANDARD 15 4.1.4 TEST SETUP 16 4.1.5 EUT OPERATING CONDITIONS 16 4.1.6 EUT TEST CONDITIONS 16 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 19 4.2.5 EUT OPERATING CONDITIONS 20 4.2.6 EUT TEST CONDITIONS 20 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 20 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 21 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 21 5 . NUMBER OF HOPPING CHANNEL 22 5.1 APPLIED PROCEDURES 22 5.1.1 TEST PROCEDURE 22 5.1.2 DEVIATION FROM STANDARD 22 5.1.3 TEST SETUP 22 5.1.4 EUT OPERATION CONDITIONS 22 5.1.5 EUT TEST CONDITIONS 22 5.1.6 TEST RESULTS 22 Report No.: BTL-FICP-1-1407C237 Page 4 of 108 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 23 6.1 APPLIED PROCEDURES / LIMIT 23 6.1.1 TEST PROCEDURE 23 6.1.2 DEVIATION FROM STANDARD 23 6.1.3 TEST SETUP 23 6.1.4 EUT OPERATION CONDITIONS 24 6.1.5 EUT TEST CONDITIONS 24 6.1.6 TEST RESULTS 24 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 25 7.1 APPLIED PROCEDURES / LIMIT 25 7.1.1 TEST PROCEDURE 25 7.1.2 DEVIATION FROM STANDARD 25 7.1.3 TEST SETUP 25 7.1.4 EUT TEST CONDITIONS 25 7.1.5 TEST RESULTS 25 8 . BANDWIDTH TEST 26 8.1 APPLIED PROCEDURES 26 8.1.1 TEST PROCEDURE 26 8.1.2 DEVIATION FROM STANDARD 26 8.1.3 TEST SETUP 26 8.1.4 EUT OPERATION CONDITIONS 26 8.1.5 EUT TEST CONDITIONS 26 8.1.6 TEST RESULTS 26 9 . PEAK OUTPUT POWER TEST 27 9.1 APPLIED PROCEDURES / LIMIT 27 9.1.1 TEST PROCEDURE 27 9.1.2 DEVIATION FROM STANDARD 27 9.1.3 TEST SETUP 27 9.1.4 EUT OPERATION CONDITIONS 27 9.1.5 EUT TEST CONDITIONS 27 9.1.6 TEST RESULTS 27 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 28 10.1 APPLIED PROCEDURES / LIMIT 28 10.1.1 TEST PROCEDURE 28 10.1.2 DEVIATION FROM STANDARD 28 10.1.3 TEST SETUP 28 10.1.4 EUT OPERATION CONDITIONS 28 10.1.5 EUT TEST CONDITIONS 28 10.1.6 TEST RESULTS 28 11 . MEASUREMENT INSTRUMENTS LIST 29 Report No.: BTL-FICP-1-1407C237 Page 5 of 108 Table of Contents Page 12 . EUT TEST PHOTO 31 ATTACHMENT A - CONDUCTED EMISSION 35 ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 38 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 40 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 47 ATTACHMENT E - NUMBER OF HOPPING CHANNEL 72 ATTACHMENT F - AVERAGE TIME OF OCCUPANCY 74 ATTACHMENT G - HOPPING CHANNEL SEPARATION MEASUREMENT 87 ATTACHMENT H - BANDWIDTH 92 ATTACHMENT I - PEAK OUTPUT POWER 97 ATTACHMENT J - ANTENNA CONDUCTED SPURIOUS EMISSION 102 Report No.: BTL-FICP-1-1407C237 Page 6 of 108 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FICP-1-1407C237 Original Issue. Aug. 25, 2014 Report No.: BTL-FICP-1-1407C237 Page 7 of 108 1. CERTIFICATION Equipment : Bluetooth Wireless FM Clock Radio with USB Charging Brand Name : iHome Model Name for FCC : iBT31; iBT31x (“X” =A‐Z, denote as color of cabinet) Model Name for IC iBT31 Applicant SDI TECHNOLOGIES INC. Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Factory : DongGuan Synst Electronics CO.,Ltd. Address : The Science&Technology Industrial Park ,Houjie Town,DongGuan,China Date of Test : Aug. 06, 2014~ Aug. 21, 2014 Test Samp…

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-1-1407C237 Page 31 of 10 8 12. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FICP-1-1407C237 Page 32 of 10 8 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FICP-1-1407C237 Page 33 of 10 8 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FICP-1-1407C237 Page 34 of 10 8 Radiated Measurement Photos Above 1000MHz