EMOIBT44Bluetooth Rechargeable Speakers System

iBT44 instruction manual iBT44 IB Size: 153mm x 120mm Printing color: Black Jan 15, 2013 P1 Bluetooth Wireless Boombox with FM Radio and USB Charging iBT44 Introduction Thank you for purchasing the iHome iBT44. This product is designed to provide high quality wireless sound for your Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P2 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. iBT44 P3 FCC ID: EMOIBT44 IC: 986B-IBT44 QDID:B019566 • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. iBT44 Table of Contents Meet Your iBT44...........................................................................................................1-2 Setting Up the Unit.........................................................................................................3-4 Using Bluetooth:Pairing Your Device.....................................................................................5 Playing Audio Via Bluetooth................................................................................................6 Playing Audio Via Aux-in/FM Radio.....................................................................................7 Using FM Radio in Other Countries/Charging Devices via USB Port..........................................8 The Remote Control ....................................................................................................9 -10 Consumer Product Safety Guide...................................................................................11-12 Troubleshooting..............................................................................................................13 Warranty......................................................................................................................13 P4 iBT44 1 Included • iBT44 system • 3.5mm stereo audio cable • Shoulder strap • Remote control • 100V-240V universal AC adaptor P5 power adaptor IBT44 System 3.5mm audio cable shoulder strapremote control The handle of the unit can be placed in two positions, upright for carrying, or back for general use or tilt-back play. Meet Your iBT44 iBT44 2 P6 Back Front Volume KnobTuning Knob Play/Pause Button Bluetooth/Line-in Button Power ButtonFM Radio ButtonGraphic Equalizer Buttons Press top of each to raise, bottom to lower for best sound Display Remote Button In Auto mode, will disable remote when operating on batteries to save battery life. Press in (ON) to activate remote during battery operation. DC Jack USB Port Line-in Jack iBT44 Using the 3 P7 Setting Up the Unit This unit can be operated using the included AC adaptor or with 6 “D” batteries for portable use (not included). For AC operation, place unit on a stable surface. Plug the power adaptor into the DC jack on back of the unit and the other end into a wall socket. The USB port can charge devices while connected to AC power For battery operation, place unit upside down to access the battery compartment. Press down directly on arrow with thumb and slide the battery compartment cover to release it. If replacing existing batteries, remove and dispose of properly. Insert 6 fresh “D” alkaline batteries with polarity (+ or –) as shown. Replace battery compartment door. Note: unit will not charge USB devices while operating on batteries. RESET RESET …

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1301C015 Page 2 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 3 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 4 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 5 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 6 of 13

iBT44 Model plate – Color: White text with Black background Jan 10, 2013 size: 80.5 x 18.5mm Frequency Range : FM 87.5 - 107.9 MHz FM 76 - 90 MHz (for Japan only) AC Adaptor: DC 12V, 3.5A DC 9V, 1.5V x 6 “D” LR20 battery Service No: iBT4-A-A Z Model: iBT44 Mfd & Serviced by SDI Technologies Inc. www.ihomeaudio.com Toll Free: 1-800-288-2792 Patents: www.ihomeaudio.com/patents FCC ID: EMOIBT44 IC: 986B-IBT44 Made in China DC 1.5V UM-1 "D" LR20 SIZE DC 1.5V UM-1 "D" LR20 SIZE DC 1.5V UM-1 "D" LR20 SIZE DC 1.5V UM-1 "D" LR20 SIZE DC 1.5V UM-1 "D" LR20 SIZE DC 1.5V UM-1 "D" LR20 SIZE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IBT44 bottom panel Engraving: 0.4mm Jan 10, 2013

Neutron Engineering Inc. Project No.: 1301C015 Page 7 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 8 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 9 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 10 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 11 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 12 of 13 Neutron Engineering Inc. Project No.: 1301C015 Page 13 of 13

Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 1 of 131 FCC/IC Radio Test Report FCC ID: EMOIBT44 IC: 986B-IBT44 This report concerns (check one) : Original Grant Class II Change Issued Date : Jan. 22, 2013 Project No. : 1301C015 Equipment : Bluetooth Rechargeable Speakers System Model Name for FCC : iBT44; iBT44X (“X” denote as color of cabinet) Model Name for IC : iBT44 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jan. 02, 2013 Date of Test: Jan. 02, 2013 ~ Jan. 21, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 2 of 131 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 3 of 131 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 27 4.2.1 RADIATED EMISSION LIMITS 27 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 28 4.2.3 TEST PROCEDURE 29 4.2.4 DEVIATION FROM TEST STANDARD 29 4.2.5 TEST SETUP 30 4.2.6 EUT OPERATING CONDITIONS 31 4.2.7 TEST RESULTS (BELOW 30MHZ) 32 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 33 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 46 5 . NUMBER OF HOPPING CHANNEL 82 5.1 APPLIED PROCEDURES / LIMIT 82 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 5.1.2 TEST PROCEDURE 82 5.1.3 DEVIATION FROM STANDARD 82 5.1.4 TEST SETUP 82 5.1.5 EUT OPERATION CONDITIONS 82 5.1.6 TEST RESULTS 83 6 . AVERAGE TIME OF OCCUPANCY 85 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 4 of 131 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 85 6.1.1 MEASUREMENT INSTRUMENTS LIST 85 6.1.2 TEST PROCEDURE 85 6.1.3 DEVIATION FROM STANDARD 85 6.1.4 TEST SETUP 86 6.1.5 EUT OPERATION CONDITIONS 86 6.1.6 TEST RESULTS 87 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 99 7.1 APPLIED PROCEDURES / LIMIT 99 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 99 7.1.2 TEST PROCEDURE 99 7.1.3 DEVIATION FROM STANDARD 99 7.1.4 TEST SETUP 99 7.1.5 EUT OPERATION CONDITIONS 99 7.1.6 TEST RESULTS 100 8 . BANDWIDTH TEST 104 8.1 APPLIED PROCEDURES / LIMIT 104 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 104 8.1.2 TEST PROCEDURE 104 8.1.3 DEVIATION FROM STANDARD 104 8.1.4 TEST SETUP 104 8.1.5 EUT OPERATION CONDITIONS 104 8.1.6 TEST RESULTS 105 9 . PEAK OUTPUT POWER TEST 109 9.1 APPLIED PROCEDURES / LIMIT 109 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 109 9.1.2 TEST PROCEDURE 109 9.1.3 DEVIATION FROM STANDARD 109 9.1.4 TEST SETUP 109 9.1.5 EUT OPERATION CONDITIONS 109 9.1.6 TEST RESULTS 110 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 114 10.1 APPLIED PROCEDURES / LIMIT 114 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 114 10.1.2 TEST PROCEDURE 114 10.1.3 DEVIATION FROM STANDARD 114 10.1.4 TEST SETUP 114 10.1.5 EUT OPERATION CONDITIONS 114 10.1.6 TEST RESULTS 115 11 . EUT TEST PHOTO 127 Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 5 of 131 1. CERTIFICATION Equipment : Bluetooth Rechargeable Speakers System Brand Name : iHome Model Name for FCC : iBT44; iBT44X (“X” denote as color of cabinet) Model Name for IC : iBT44 Applicant : SDI TECHNOLOGIES INC. Factory : Dongguan Homania Electronic Products Co., Ltd. Address : Chung Kou Manage Area, Shijie Town, Dongguan City, Guangdong, China Date of Test : Jan. 02, 2013 ~ Jan. 21, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, d…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 127 of 131 11. EUT TEST PHOTO Conducted Measurement Photos AUX IN/Bluetooth Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 128 of 131 Conducted Measurement Photos FM Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 129 of 131 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 130 of 131 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1301C015 Page 131 of 131 Radiated Measurement Photos Above 1000MHz