EMOIBT88Bluetooth Rechargeable Speakers System

Model iBT88 Bluetooth Rechargeable Speakers System Questions? Visit www.ihomeaudio.com iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by SDI Customer Service. The product must include proof of purchase, including date of purchase. An out-of-warranty fee for service will be charged for units that are received without proof of purchase. Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are the most common cause of problems encountered. If service is still required: 1. Call SDI Customer Service at 1-800-288-2792 for Return Authorization and for the address of the Factory Service Center. 2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box. SDI is not responsible for damage that occurs during shipping to the Factory Service Center. 3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period. Also include your name and address information, a brief description for why the unit is being returned, and the return authorization number. No unit can be processed without a return authorization number. 4. Write the return authorization number on the side of the shipping package and send the unit prepaid and insured to the Factory Service Center address authorized by SDI Customer Service. Disclaimer of Warranty NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner. This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI product. © 2013 SDI Technologies, Inc. All rights reserved Questions? Visit www.ihomeaudio.com or call 1-800-288-2792 Toll Free Limited 1 Year Warranty Information Printed in China iBT88-121812-A iBT88 IB Front 324Wmm x 184Hmm Print in Black color Dec 18,12 A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and un…

Text truncated - open the document above for the full version.

Modèle iBT88 Bluetooth Rechargeable Système de hauts-parleurs Des questions ? Visitez le site www.ihomeaudio.com iHome Products, une division de SDI Technologies Inc. (ci-après désignée sous le nom SDI), garantit que cet appareil est exempt de tout vice de fabrication et de matériaux, dans des conditions normales d'utilisation, pour une période de 1 an à compter de la date d'achat initiale. Si cet appareil ne fonctionne pas de manière satisfaisante, il est préférable de le retourner au magasin où il a été acheté, dans une première étape. Si le problème n'est pas résolu à ce niveau et si l'appareil doit toujours être réparé pour une défaillance ou un dysfonctionnement durant la période de garantie, SDI, à sa discrétion, le réparera ou le remplacera sans frais. Cette décision sera prise suite à une vérification de la défaillance ou du dysfonctionnement de l'appareil retourné au centre d'entretien à l'adresse indiquée ci-dessous. L'appareil doit être accompagné d'une preuve datée de l'achat. Tout appareil envoyé sans preuve d'achat sera facturé pour toute réparation selon un barème hors garantie. Avant de renvoyer cet appareil pour réparation, remplacez les piles par des piles neuves (si possible), car des piles déchargées ou défectueuses causent la plupart des problèmes. Si malgré cela le problème n'est pas résolu : 1. Appelez le service à la clientèle de SDI au 1-800-288-2792 pour obtenir une autorisation de retour et l'adresse du Centre de service concerné. 2. Enlevez les piles (s'il y a lieu) et emballez le produit dans une boîte en carton ondulé robuste et bien matelassée. SDI ne peut pas être tenue responsable des dommages qui risquent de se produire pendant le transport vers le Centre de réparation. 3. Si l'appareil est toujours sous garantie, joignez une copie de votre ticket de caisse, relevé de carte de crédit ou toute autre preuve d'achat datée. Indiquez également votre nom, adresse, une brève description expliquant la cause du renvoi de l'appareil et le numéro d'autorisation de retour. Aucun appareil ne peut être accepté sans un numéro d'autorisation de retour. 4. Inscrivez le numéro d'autorisation de retour sur l'un des côtés de l'emballage et l'envoyer, port payé et assuré, à l'adresse du Centre de service agréé par SDI. Exclusion de Garantie REMARQUE : Cette garantie n'est valable que si l'appareil a été utilisé aux fins pour lesquelles il a été destiné. Elle ne couvre pas (i) tout appareil qui a été endommagé par négligence ou actes délibérés, mauvaise utilisation ou accident ou qui a été altéré ou réparé par des personnes non autorisées ; (ii) tout appareil dont le boîtier est fissuré/brisé ou qui a été endommagé par une chaleur excessive ; (iii) tout appareil dont le lecteur CD/cassettes est endommagé (s'il existe) ; (iv) les frais d'expédition de l'appareil au centre de service et de retour à son propriétaire. Cette garantie n'est valable qu'aux États-Unis d'Amérique et ne s'applique qu'à l'acheteur initial de l'appareil. En aucun cas, SDI, l'une de ses filiales, sous-traitants, revendeurs, dirigeants, administrateurs, actionnaires, membres ou agents ne seront tenus responsables envers vous ou un tiers de tout dommage direct ou indirect, toute perte de profits, d'indemnisation au-delà du dommage subi. (Certains États n'autorisent pas de limitations de garanties implicites ou d'exclusion de dommages consécutifs, il se peut donc que ces restrictions ne s'appliquent pas dans votre cas.) Cette garantie vous accorde des droits légaux précis auxquels peuvent s'ajouter d'autres droits pouvant être différents d'une juridiction à l'autre. Votre reconnaissance et votre accord à respecter toutes les limites de responsabilité de la garantie ci-haut mentionnée est un contrat irrévocable pour vous suite à votre transfert de devises (mandat-carte, chèque de banque ou carte de crédit) pour l'achat d'un produit SDI. © 2013 SDI Technologies Inc. Tous droits réservés Des questions ? Rendez-vous sur www.ihomeaudio.com ou composez le numéro vert 1-800-288-2792 Garantie limitée de 1 an Printed in China iBT88-011013-A iBT88 IB French Front 324Wmm x 184Hmm Print in Black color Jan 10,13 • Avertissement : Tout changement ou modification apporté à cet appareil sans le consentement expresse de la partie responsable pour la conformité peut annuler le droit de l'utilisateur d'utiliser cet appareil. • REMARQUE : Cet équipement a été testé et jugé conforme aux limitations pour un appareil numérique de Classe B, selon la Section 15 de la règlementation FCC. Ces limites sont conçues pour offrir une protection raisonnable contre les interférences nocives d'une installation résidentielle. Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut causer des interférences nuisibles aux communications radio. Cependant, il n'y a aucune garantie qu'une interférence ne prendra pas place dans une installation particulière. Si cet équipement ne cause pas d'interférence nocive à la réception de la radio ou du téléviseur, ce qui peut être déterminé en allumant et fermant l'équipement, l'utilisateur est encouragé à tenter de corriger l'interférence en utilisant l'un ou l'autre des moyens suivants : • Réorientez ou resituez l'antenne de réception. • Augmentez la séparation entre l'équipement et le récepteur. • Branchez l'équipement dans une prise d'un circuit différent que celui dans lequel est branché le récepteur. • Consultez le marchand ou un technicien expérimenté en radio/téléviseur pour obtenir de l'aide. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada Cet appareil est conforme à la section 15 des règlements de la FCC, son utilisation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d'interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement. FCC ID:EMOIBT88 IC:986B-IBT88 Décl…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1212C207 Page 2 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 3 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 4 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 9 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 10 of 12

Model: iBT88 Charging voltage: DC 5V, 500mA Service No: iBT88-A-A Mfd & Serviced by SDI Technologies Inc. Patents: www.ihomeaudio.com/patents Toll Free: 1 (800) 288 2792 www.ihomeaudio.com Made in China Date code location iBT88 Model plate On bottom panel of unit Material: Black label Heavy glued label Print: White color (text) PP Coating 35mmW x 35mmH Oct 5,12 2nd SpeakerMain Speaker This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. iBT88 FCC Statement On bottom panel of unit Material: Black label Heavy glued label Print: White color (text) PP Coating 35mmW x 35mmH Oct 5,12 FCC ID:EMOIBT88 IC:986B-IBT88

Neutron Engineering Inc. Project No.: 1212C207 Page 4 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 5 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 6 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 7 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 8 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 10 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 11 of 12 Neutron Engineering Inc. Project No.: 1212C207 Page 12 of 12

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 1 of 123 FCC/IC Radio Test Report FCC ID: EMOIBT88 IC: 986B-IBT88 This report concerns (check one) : Original Grant Class II Change Issued Date : Jan. 07, 2013 Project No. : 1212C207 Equipment : Bluetooth Rechargeable Speakers System Model Name for FCC : iBT88; iBT88X (“X” denote as color of cabinet) Model Name for IC : iBT88 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Dec. 21, 2012 Date of Test: Dec. 21, 2012 ~ Jan. 06, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 2 of 123 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 3 of 123 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 20 4.2.1 RADIATED EMISSION LIMITS 20 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 21 4.2.3 TEST PROCEDURE 22 4.2.4 DEVIATION FROM TEST STANDARD 22 4.2.5 TEST SETUP 23 4.2.6 EUT OPERATING CONDITIONS 24 4.2.7 TEST RESULTS (BELOW 30MHZ) 25 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 26 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 39 5 . NUMBER OF HOPPING CHANNEL 75 5.1 APPLIED PROCEDURES / LIMIT 75 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 75 5.1.2 TEST PROCEDURE 75 5.1.3 DEVIATION FROM STANDARD 75 5.1.4 TEST SETUP 75 5.1.5 EUT OPERATION CONDITIONS 75 5.1.6 TEST RESULTS 76 6 . AVERAGE TIME OF OCCUPANCY 78 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 4 of 123 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 78 6.1.1 MEASUREMENT INSTRUMENTS LIST 78 6.1.2 TEST PROCEDURE 78 6.1.3 DEVIATION FROM STANDARD 78 6.1.4 TEST SETUP 79 6.1.5 EUT OPERATION CONDITIONS 79 6.1.6 TEST RESULTS 80 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 92 7.1 APPLIED PROCEDURES / LIMIT 92 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 92 7.1.2 TEST PROCEDURE 92 7.1.3 DEVIATION FROM STANDARD 92 7.1.4 TEST SETUP 92 7.1.5 EUT OPERATION CONDITIONS 92 7.1.6 TEST RESULTS 93 8 . BANDWIDTH TEST 97 8.1 APPLIED PROCEDURES / LIMIT 97 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 97 8.1.2 TEST PROCEDURE 97 8.1.3 DEVIATION FROM STANDARD 97 8.1.4 TEST SETUP 97 8.1.5 EUT OPERATION CONDITIONS 97 8.1.6 TEST RESULTS 98 9 . PEAK OUTPUT POWER TEST 102 9.1 APPLIED PROCEDURES / LIMIT 102 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 102 9.1.2 TEST PROCEDURE 102 9.1.3 DEVIATION FROM STANDARD 102 9.1.4 TEST SETUP 102 9.1.5 EUT OPERATION CONDITIONS 102 9.1.6 TEST RESULTS 103 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 107 10.1 APPLIED PROCEDURES / LIMIT 107 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 107 10.1.2 TEST PROCEDURE 107 10.1.3 DEVIATION FROM STANDARD 107 10.1.4 TEST SETUP 107 10.1.5 EUT OPERATION CONDITIONS 107 10.1.6 TEST RESULTS 108 11 . EUT TEST PHOTO 120 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 5 of 123 1. CERTIFICATION Equipment : Bluetooth Rechargeable Speakers System Brand Name : iHome Model Name for FCC : iBT88; iBT88X (“X” denote as color of cabinet) Model Name for IC : iBT88 Applicant : SDI TECHNOLOGIES INC. Factory : Dongguan Homania Electronic Products Co., Ltd. Address : Chung Kou Manage Area, Shijie Town, Dongguan City, Guangdong, China Date of Test : Dec. 21, 2012 ~ Jan. 06, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evalu…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 120 of 123 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 121 of 123 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 122 of 123 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C207 Page 123 of 123 Radiated Measurement Photos Above 1000MHz