EMOICVBT100ALarge Vanity Mirror with True Color Lighting and Bluetooh Speaker

Quick Start Guide iCVB T100 REFLECT STUDIO PRO iHome Beauty iCVBT100 V anity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 3C + 2C (PMS Cool Gray 9C & PMS 2705U, Cyan ) Material: 120 gsm wood free paper Date: June 9, 2020 What’s In the Box iCVBT100 Vanity Mirror Removable Detail Mirror AC AdapterCleaning Cloth USB Setup Overview Connecting Mirror to Power • Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet. outlet Jack USB 2.4A Charging Port Bluetooth Pairing Button DC 18V/2A Front Panel Power Button Tap to turn mirror ON or OFF Minus/Plus Volume Buttons Tap to lower or raise volume Light Button Tap to adjust brightness of mirror light Touch and hold to change light mode Multi-Function Button Tap to play/ pause audio Tap to Answer/End calls Touch and hold to decline calls Touch and hold to access Siri or Google Assistant Note: Power and Light features operate separately and independently: • Turn the Power Button ON to access audio features including using Bluetooth. • Turn the Light Button ON to access various light modes and brightness levels. Back Panel USB 2.4A Charging Port When the mirror is connected to AC power, use the USB port to charge devices Bluetooth Button Press and hold for 3 seconds to enter pairing mode USB DC Jack Use included adapter to connect to AC power USB Light Function • Tap the Light Button to turn the mirror light ON. • Tap the Light Button repeatedly to cycle through brightness levels: Max, High, Mid, Low, and OFF. • Touch and hold the Light Button to cycle through light modes: Soft Yellow, Warm White, and Bright White. Light Modes: • Warm simulates low light environments • Bright emulates outdoors/sunlight • Cool matches standard indoor settings Ideal Lighting: night out / date night for closer detail oce/indoor environments Note: After 60 minutes of inactivity, the light will automatically shut o. Press the Light Button again to resume the previous light mode settings. (This will not aect Bluetooth audio.) Using Bluetooth Audio • Tap Power Button to turn speaker ON • Press and hold the Bluetooth Button on the back of the mirror for 3 seconds to enter pairing mode, indicated by the blinking icon on the front of the mirror • Select “iHome Reflect Studio Pro” on your device’s Bluetooth menu to connect. The icon will glow solid once connected. • Tap to play / pause Bluetooth audio • Tap to answer/end Bluetooth calls • Touch and hold for 3 seconds to decline Bluetooth calls • Quick double tap for next track • Quick triple tap for previous track or to restart current track • Press and hold for 3 seconds to activate Siri/Google Assistant (Unit must be connected to a Bluetooth device with an active internet connection) • Tap to lower or raise volume RESET BLUETOOTH: Press and hold the Bluetooth Button for 10 seconds to reset Bluetooth if necessary. Detail Mirror • Remove the protective tape from the included detail mirror and attach wherever you like on the Reflect Studio Pro mirror face (or anywhere!) Maintenance • This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge free. • Wash the mirrors with mild soap and water when needed. • The back of the detail mirror has Simple-Stick™ micro suction material. If necessary, clean the Simple-Stick material with oce tape. Charging Devices Mirror MUST be connected to power to use USB charging from the unit. • Connect USB charging cable (not included) to USB port and the other end to your device to charge. USB outlet Jack USB 2.4A Charging Port Bluetooth Pairing Button DC 18V, 2A QDID: B020415 IMPORT ANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. GENERAL • Please exercise caution when in use as the mirror is made of glass. 1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings. 3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. Do not use around aerosol products or in the presence of oxygen being administered. 4. Sunlight – Never place the mirror in or expose the mirror to direct sunlight. The sun’s rays can reflect to become focused and cause excessive heat and/or fire. Do not use mirror in direct sunlight as reflected sunlight could injure eyes. 5. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 6. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket. 7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions. 8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. 9. Attachments – Do not use attachments not recommended by the pro…

Text truncated - open the document above for the full version.

SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: [email protected] Product Similarity Declaration 2020-06-17 To Whom It May Concern, We, SDI Technologies Inc., hereby declare that we have a product named as Large Vanity Mirror with True Color Lighting and Bluetooth Speaker (Model number: iCVBT100) (FCC ID: EMOICVBT100A) was tested by BACL, meanwhile, for our marketing purpose, we would like to list series models (iCVBT100SN, iCVBT100X (where X refers to 1 or 2 alphabets combination denote the color of cabinet)) on reports and certificate, all the models are electrically identical. The only difference is the color and model number. No other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Sincerely Yours, Signature: David Stetin Compliance Officer y, Sit

QA-FR-170-B 7/29/2014 SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: [email protected] FCC Authorization Date: 2020-06-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, SDI Technologies Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corp to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: David Stetin Compliance Officer

SDI Technologies Inc. ADD: 1299 Main St. Rahway NJ 07065, United States Tel: 732 574-9000 Fax: 732 574-2634 Email: [email protected] FCC Confidential Authorization Date: 2020-06-17 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EMOICVBT100A In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, SDI Technologies Inc. , hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature: David Stetin Compliance Officer

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For SDI Technologies Inc. 1299 Main St. Rahway, NJ 07065, United States FCC ID: EMOICVBT100A Report Type: Original Report Product Type: Large Vanity Mirror with True Color Lighting and Bluetooh Speaker Re port Number: RSZ200528K13-00A Re port Date: 2020-07-01 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A FCC Part 15.247 Page 2 of 29 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC §15.247 (i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 RESULT ...................................................................................................................................................................... 10 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 11 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 EUT SETUP ................................................................................................................................................................ 12 EMI TEST RECEIVER SETUP ....................................................................................................................................... 12 TEST PROCEDURE ............................................................................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixA: 20dBEmission Bandwidth Test Result TestMode Antenna Channel 20db EBW[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.846 --- PASS 2441 0.846 --- PASS 2480 0.846 --- PASS 2DH1 Ant1 2402 1.278 --- PASS 2441 1.281 --- PASS 2480 1.281 --- PASS 3DH1 Ant1 2402 1.251 --- PASS 2441 1.254 --- PASS 2480 1.254 --- PASS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 2DH1_Ant1_2402 2DH1_Ant1_2441 2DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH1_Ant1_2402 3DH1_Ant1_2441 3DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixB: Occupied Channel Bandwidth Test Result TestMode Antenna Channel OCB [MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.902 --- PASS 2441 0.905 --- PASS 2480 0.902 --- PASS 2DH1 Ant1 2402 1.211 --- PASS 2441 1.211 --- PASS 2480 1.208 --- PASS 3DH1 Ant1 2402 1.199 --- PASS 2441 1.196 --- PASS 2480 1.199 --- PASS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 2DH1_Ant1_2402 2DH1_Ant1_2441 2DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH1_Ant1_2402 3DH1_Ant1_2441 3DH1_Ant1_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixC: Maximum conducted Peak output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict DH1 Ant1 2402 0.87 <=20.97 PASS 2441 0.83 <=20.97 PASS 2480 1.27 <=20.97 PASS 2DH1 Ant1 2402 3.24 <=20.97 PASS 2441 2.93 <=20.97 PASS 2480 3.70 <=20.97 PASS 3DH1 Ant1 2402 3.30 <=20.97 PASS 2441 3.37 <=20.97 PASS 2480 3.88 <=20.97 PASS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixD: Carrier frequency separation Test Result TestMode Antenna Channel Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop 1.000 >=0.564 PASS 2DH1 Ant1 Hop 1.000 >=0.852 PASS 3DH1 Ant1 Hop 1.000 >=0.834 PASS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixE: Time of occupancy Test Result TestMode AntennaChannel BurstWidth [ms] TotalHops [Num] Result[s]Limit[s] Verdict DH1 Ant1 Hop 0.40 300 0.120 <=0.4 PASS DH3 Ant1 Hop 1.65 100 0.165 <=0.4 PASS DH5 Ant1 Hop 2.89 80 0.232 <=0.4 PASS 2DH1 Ant1 Hop 0.40 310 0.123 <=0.4 PASS 2DH3 Ant1 Hop 1.64 130 0.213 <=0.4 PASS 2DH5 Ant1 Hop 2.88 80 0.231 <=0.4 PASS 3DH1 Ant1 Hop 0.40 300 0.119 <=0.4 PASS 3DH3 Ant1 Hop 1.64 130 0.213 <=0.4 PASS 3DH5 Ant1 Hop 2.88 100 0.288 <=0.4 PASS Note 1：A period time=0.4*79=31.6(S), Result=BurstWidth*Totalhops Note 2: Totalhops=Hopping Number in 3.16s*10 Note 3: Hopping Number in 3.16s=Total of highest signals in 3.16s (Second high signals were other channel) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A Test Graphs DH1_Ant1_Hop DH3_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A DH5_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 2DH1_Ant1_Hop 2DH3_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 2DH5_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH1_Ant1_Hop 3DH3_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH5_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixF: Number of hopping channels Test Result TestMode Antenna Channel Result[Num] Limit[Num] Verdict DH1 Ant1 Hop 79 >=15 PASS 2DH1 Ant1 Hop 79 >=15 PASS 3DH1 Ant1 Hop 79 >=15 PASS Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop 3DH1_Ant1_Hop Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A AppendixG:Band edge measurements Test Graphs DH1_Ant1_Low_2402 DH1_Ant1_High_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A DH1_Ant1_Low_Hop_2402 DH1_Ant1_High_Hop_2480 2DH1_Ant1_Low_2402 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 2DH1_Ant1_High_2480 2DH1_Ant1_Low_Hop_2402 2DH1_Ant1_High_Hop_2480 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH1_Ant1_Low_2402 3DH1_Ant1_High_2480 3DH1_Ant1_Low_Hop_2402 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200528K13-00A 3DH1_Ant1_High_Hop_2480

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)