EMOICVBT20APortable Rechargeable Flat Panel LED Vanity Mirror with Wireless Speaker

Model: iCVBT20 QSG - US English size: 408mm(W) x 150mm(H) Folded Size: 102 x 150 mm Mat’l: 85gsm, WF paper, 1C + 1C Color: Black text on white background Oct. 22, 20. 231 Quick Start Guide iCVBT20 • Press the Light Button to select a brightness level: Hi, Mid, or Low. Note: When not connected to the charger, the mirror light runs on a timer that will automatically power off after 60 minutes. Audio Function Charging the Mirror • Connect the included USB charging cable to the micro USB Charging Port on the back of the unit, and the standard end to a powered USB port. Light Function • Press and hold the Light Button to turn the light ON or OFF. (Lights are independent from Power ON/OFF.) USB AC adaptor (not included) USB charging cable (included) Status LED Red = Charging Status Blue = Pairing Status Bluetooth Pairing Button USB Charging Port Reset Button Power ON/OFF Volume Down Play/Pause Volume Up Light Button PORTABLE iHome Beauty FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equ ipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformité. Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à utiliser l'équipement. CAN ICES-3(B) / NMB-3(B) 654 Adjusting the Mirror The door on the back of the unit also works as a kickstand for the mirror. Reset In the event of interrupted operation, use the extended wire of a paper clip or other thin tool to push in the Reset Button on the back of the unit. Maintenance This unit comes with a cleaning cloth to keep the mirror smudge free. (If more cleaning is needed, unplug the unit and wipe down with a slightly damp cloth.) WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device. To dispose of the unit, follow the instructions below: • Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances. • Always dispose of used batteries/electronics in accordance with the prevailing community regulations. • Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-off location near you, visit www.call2recycle.com GENERAL BATTERY PRECAUTIONS • Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. • Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substances. • Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit). • Never expose a battery to any liquid. • Never expose a battery to excessive heat such as direct sunlight or fire. Never use a battery pack in an unventilated vehicle where excessive internal temperatures may be encountered. • Always keep batteries out of the reach of infants and small children. IMPORT…

Text truncated - open the document above for the full version.

E:\ED200103042EES200103045KIDiBT780FCCID\work\POA_Letter_140225.docx SDITECHNOLOGIESINC. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2020-11-23 SUBJECT:FCCApplicationfor(FCCID:EMOICVBT20A) ToWhomItMayConcern: We,theundersigned,herebyauthorizeEMTEK(DONGGUAN)CO.,LTD.atSamLvon ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhavethe sameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, DavidStetin Date:2020-11-23

SDITechnologiesInc. Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodel numberandcolorofappearance. ProductionnameTrademarkFCCModelno. PortableRechargeableFlat PanelLEDVanityMirror withWirelessSpeaker iHomeEMOICVBT20AiCVBT20,iCVBT20W,iCVBT20X(X could1or2digitsbyany alphabetsdenotedifferent cabinetcolor) Confirmedby: DavidStetin 2020-11-23

FCCID:EMOICVBT20A

iCVBT20 GAW |08.07.2020 v3 iCVBT20 08.05.2020 v2 Mitchell Bailey RED - Debossed 0.3mmBLUE - Embossed 0.3mm iCVBT20 Frosted LED area is 12mm wide Bluetooth / Charging Status LED GRAY - Pad Printed Buttons RESETUSB IN BOTTOM BACK - BEHIND STAND FRONTSIDEBACK Aug 07, 2020 iCVBT20 PROPERTY OF SDI TECHNOLOGIES 2020 2021 2022 2023 2024 iCVBT20 PROPERTY OF SDI TECHNOLOGIES 2020 2021 2022 2023 2024 iCVBT20 PROPERTY OF SDI TECHNOLOGIES 2020 2021 2022 2023 2024 Silkscreen: Cool grey 6C Text: Cool gray 8C matched main cabinet white tone Model plate size: 60mmW x 35mmH iHome Beauty PORTABLE FCC ID: EMOICVBT20A IC: 986B-ICVBT20A MODEL: iCVBT20 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B) / NMB-3(B) HVIN: iCVBT20a Manufactured and Serviced by SDI Technologies Inc. Service Number: iCVBT20-A-A USB Input: DC 5V, 1A Patents: www.ihome.com/patents Made in China www.iHome.com Sept 9, 2020

FCCID:EMOICVBT20A ANT

RFEXPOSUREEVALUATION EUTSpecification EUTPortableRechargeableFlatPanelLEDVanityMirrorwith WirelessSpeaker ModelNumberiCVBT20,iCVBT20W,iCVBT20X(Xcould1or2digitsby anyalphabetsdenotedifferentcabinetcolor) FCCIDEMOICVBT20A Antennagain(Max)0dBi OperationFrequency2402-2480MHz InputRatingEMOICVBT20A ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 KindofDevice:BluetoothVer.5.0 ModulationBT:(GFSK,π/4-DQPSK,8DPSK) Max.outputpowerBT:1.32dBm(0.001355W) TestRequirement: Accordingto§15.247(i)and§1.1307(b)(1),systemsoperatingunderthe provisionsofthissectionshallbeoperatedinamannerthatensuresthatthe publicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualityforTCBapproval. OneantennaisavailablefortheEUT.Theminimumseparationdistanceis 5mm. BTDSS: Transmit Frequency (MHz) Mode Measure dPower (dBm) Tune upPower (dBm) Maxtuneup power(dBm) Calculation Result 1-g SAR 2.402GFSK -0.210 ± 110.3902263 3 2.441GFSK 0.270 ± 110.3933009 3 2.480GFSK0.330±110.39651153 2.402 Π/4-DQ PSK 0.891±120.49126583 2.441 Π/4-DQ PSK 1.261±120.49523793 2.480 Π/4-DQ PSK 1.271 ± 120.4991785 3 2.4028DPSK 0.851 ± 120.4912658 3 2.4418DPSK 1.271 ± 120.4952379 3 2.4808DPSK1.321±120.49917853 AccordingtoKDB447498,nostand-alonerequiredforBTantenna,andno simultaneousSARmeasurementisrequired. Signature: SamLv Date:2020-12-01

Report No.ES201104004WPage 1 of 74 Ver.1.0 TEST REPORT Product Name ： Portable Rechargeable Flat Panel LED Vanity Mirror with Wireless Speaker Model Number ： iCVBT20, iCVBT20W, iCVBT20X (X could 1 or 2 digits by any alphabets denote different cabinet color) FCC ID ： EMOICVBT20A Prepared for:SDI Technologies Inc. Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Prepared by:EMTEK (SHENZHEN) CO., LTD. Address:Building 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number:ES201104004W Date(s) of Tests:November 04, 2020 to November 20, 2020 Date of issue:November 20, 2020 Report No.ES201104004WPage 2 of 74 Ver.1.0 VERIFICATION OF COMPLIANCE Applicant: SDI Technologies Inc 1299, Main Street, Rahway, NJ 07065, U.S.A. Manufacturer: SDI Technologies Inc 1299, Main Street, Rahway, NJ 07065, U.S.A. Factory:TOP TEAM DEREK (SHAOGUAN) LIMITED GAOJILING, TAIPING TOWN, SHIXING COUNTY, SHAO GUAN CITY, GUANGDONG PROVINCE, CHINA Product Description: Portable Rechargeable Flat Panel LED Vanity Mirror with Wireless Speaker Trade Mark:iHome Model Number: iCVBT20, iCVBT20W, iCVBT20X (X could 1 or 2 digits by any alphabets denote different cabinet color) (note: The models are the same except color of appearance and model number, here we prepare iCVBT20 for the all test) We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2018). Date of Test: November 04, 2020 to November 20, 2020 Prepared by: Loren Luo /Editor Reviewer: Tim Dong /Supervisor Approved & Authorized Signer : Lisa Wang /Manager Report No.ES201104004WPage 3 of 74 Ver.1.0 Modified Information VersionSummaryRevision DateReport No. Ver.1.0Original Report/ES201104004W Report No.ES201104004WPage 4 of 74 Ver.1.0 Table of Contents 1. GENERAL INFORMATION............................................................................................................6 1.1 PRODUCTDESCRIPTION..............................................................................................................................6 1.2 TESTMETHODOLOGY..................................................................................................................................7 1.3 TESTFACILITY.............................................................................................................................................8 2. SYSTEM TEST CONFIGURATION.............................................................................................9 2.1 EUT CONFIGURATION.................................................................................................................................9 2.2 EUT EXERCISE............................................................................................................................................9 2.3 TESTPROCEDURE.......................................................................................................................................9 2.4 CONFIGURATION OFTESTEDSYSTEM......................................................................................................10 3. SUMMARY OF TEST RESULTS................................................................................................11 4. DESCRIPTION OF TEST MODES.............................................................................................12 5. TEST SYSTEM UNCERTAINTY.................................................................................................13 6. CONDUCTED EMISSIONS TEST..............................................................................................14 6.1 MEASUREMENTPROCEDURE:...................................................................................................................14 6.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)..........................................................................14 6.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................14 6.4 MEASUREMENTRESULT:...........................................................................................................................15 6.5 CONDUCTEDMEASUREMENTPHOTOS:....................................................................................................16 7. RADIATED EMISSION TEST.....................................................................................................19 7.1 MEASUREMENTPROCEDURE....................................................................................................................19 7.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION).........................................................................21 7.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................22 7.4 RADIATEDEMISSIONLIMIT........................................................................................................................23 7.5 MEASUREMENTRESULT............................................................................................................................24 7.5 RADIATEDMEASUREMENTPHOTOS:........................................................................................................29 8. CHANNEL SEPARATION TEST................................................................................................30 8.1 MEASUREMENTPROCEDURE....................................................................................................................30 8.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION).........................................................................30 8.3 MEASUREMENT…

Text truncated - open the document above for the full version.

FCCID:EMOICVBT20A