EMOICVBT40AFlat Panel Vanity Mirror with Bluetooth Downward Firing Mono Speaker

CONNECTING TO BLUETOOTH • Press the Power Button to turn the unit ON. • Press and hold the Bluetooth Pairing Button (on the back of the unit) for 3 seconds. The blinking icon on the front panel will indicate the unit is in pairing mode. • Select ‘iHome Reflect TRIFOLD’ on your device’s Bluetooth menu to connect. The icon will glow solid to confirm your device is connected. SETUP OVERVIEW Open the left and right side panels of the REFLECT TRIFOLD and adjust the angles as needed. CONNECTING MIRROR TO POWER Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet. 2 6 FCC INFORMATION This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device comply with ISEDC RF exposure requirement, users can obtain Canadian information on RF exposure and compliance. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. L'appareil est conforme aux exigences d'exposition RF ISEDC, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformité. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à utiliser l'équipement. CAN ICES 3(B) / NMB-3(B) 8 1 Model: iCVBT40 5 WHAT’S INCLUDED: iCVBT40 Vanity Speaker REFLECT TRIFOLD AC Adapter USB outlet USB Charging Port (1A) Bluetooth Pairing Button DC Jack 9V/2A 7 IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. 1. Do not use this product near water. 2. Unplug unit and clean only with damp cloth. Stronger cleaning agents, such as Benzene, thinner or similar materials can damage the surface of the unit. 3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4. Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat. 5. Only use attachments/accessories specified by the manufacturer. 6. Unplug this product during lightning storms or when unused for long periods of time. 7. Damage Requiring Service – This product should be serviced by qualified service personnel when: - Plug has been damaged. - Objects have fallen into or liquid has been spilled into the enclosure. - The unit has been exposed to rain. The unit has been dropped or the enclosure damaged. - The unit exhibits a marked change in performance or does not operate normally. 8. No naked flame sources, such as lighted candles, should be placed on this product. 9. Attention should be drawn to the environmental aspects of battery disposal. 10. This product is suitable for use in tropical and/or moderate climates. WARNING: - To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. - The mains plug of power adaptor is used as…

Text truncated - open the document above for the full version.

Rev11/20/07 SDITechnologiesInc. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:EMOICVBT40A PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription BlockDiagram Schematics OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName ManualUsermanual InternalphotosInternalphotos Sincerely, DavidStetin 2022-06-07

Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethesameRFmoduleand antenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodelnumberandcolorofappearance. ProductionnameFCCIDModelno. FlatPanelVanityMirror withBluetoothDownward FiringMonoSpeaker EMOICVBT40AiCVBT40,iCVBT40,iCVBT40X(Xcouldbesingleor multipledigitsbyanyalphabetsdenotedifferent cabinetcolor) Confirmedby: DavidStetin 2022-06-07

SDITechnologiesInc. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2022-06-07 SUBJECT:FCCApplicationfor(FCCID:EMOICVBT40A) ToWhomItMayConcern: We,theundersigned,herebyauthorizeSamLvatEMTEK(DONGGUAN)CO.,LTD.on ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhave thesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, DavidStetin 2022-06-07

FCC ID: EMOICVBT40A

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B) / NMB-3(B) iCVBT40 GAW 03.10.2022 | v1 iCVBT40 03.10.2022 v1 Mitchell Bailey PINK - Masked silkscreen graphics, backlit with white LED RED - Screen Print: See DL for Color GREEN - Embossed 0.3mm GREEN - Embossed 0.3mm iCVBT40 Model Plate - Matte Texture Sheet: PVC cut sheet - Colors defined on DL: Cool grey 6c Button Icon Placement USB iHome Logo spaced 1.5mm from buttons Back lit button iCVBT40 - Reflect Trifold Frosted LED area is 10mm wide BLUE - Debossed 0.3mm GREEN - Embossed 0.3mm BLUE - Debossed 0.3mm M a n u f a c t u r e d a n d S e r v i c e d b y S D I T e c h n o l o g i e s I n c . - M a d e i n C h i n a w w w . i H o m e . c o m - F C C I D : E M O I C V B T 4 0 A - I C : 9 8 6 B - I C V B T 4 0 A - D e s i g n e d i n t h e U S A A C A d a p t e r : D C 9 V , 2 A | U S B O u t p u t : D C 5 V , 1 A | P a t e n t s : w w w . i h o m e . c o m / p a t e n t s M o d e l : i C V B T 4 0 H V I N : i C V B T 4 0 a S e r v i c e # i C V B T 4 0 - A - A REFLECT TRIFOLD iHome Beauty Feb 06, 2020 Mar 14, 2022

FCC ID: EMOICVBT40A ANT

RFEXPOSUREEVALUATION EUTSpecification EUTFlatPanelVanityMirrorwithBluetoothDownwardFiring MonoSpeaker ModelNumberiCVBT40,iCVBT40,iCVBT40X(Xcouldbesingleor multipledigitsbyanyalphabetsdenotedifferentcabinet color) FCCIDEMOICVBT40A Antennagain(Max)0dBi OperationFrequency2.4G:2402MHz-2480MHz InputRatingAC120-240V~50/60Hz ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 ModulationGFSK,pi/4-DQPSK,8-DPSK Max.outputpower-1.37dBm(0.000729W) EvaluationappliedMPEEvaluation SAREvaluation TestRequirement: RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. 2MeasurementResult Antennagain:0dBi ModeFrequ ency (MHz) Output Power (dBm) Target Power W/tolera nce (dBm) Max tune up power toleranc e (dBm) Max tune up power toleranc e (mW) Power Densityat R=20cm (mW/cm 2 ) Limit (mW/ cm 2 ) Verdict GFSK 2402-2.29-3±1-20.630.0001261.0PASS 2441-2.82-3±1-20.630.0001261.0PASS 2480-3.43-4±1-30.500.0001001.0PASS pi/4-DQPSK 2402-1.61-2±1-10.790.0001581.0PASS 2441-2.12-3±1-20.630.0001261.0PASS 2480-2.69-3±1-20.630.0001261.0PASS 8-DPSK 2402-1.37-2±1-10.790.0001581.0PASS 2441-1.78-2±1-10.790.0001581.0PASS 2480 -2.38 -3±1-20.630.0001261.0PASS Signature: SamLv Date:2022-06-07

Report No. EDG2205230290E00401RPage 1 of 61 Ver.1.0 TEST REPORT Product Name ： Flat Panel Vanity Mirror with Bluetooth Downward Firing Mono Speaker Model Number ： iCVBT40, iCVBT40, iCVBT40X (X could be single or multiple digits by any alphabets denote different cabinet color) FCC ID ： EMOICVBT40A Prepared for:SDI Technologies Inc. Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Prepared by:EMTEK (DONGGUAN) CO., LTD. Address:-1&2/F.,Building 2, Zone A, Zhongda Marine Biotechnology Research and Development Base, No.9, Xincheng Avenue, Songshanhu High-technology Industrial Development Zone, Dongguan, Guangdong, China TEL: +86-0769-22807078 FAX: +86-0769-22807079 Report Number:EDG2205230290E00401R Date(s) of Tests:May 23, 2022 to June 07, 2022 Date of issue:June 07, 2022 $二维码$ Report No. EDG2205230290E00401RPage 2 of 61 Ver.1.0 Table of Contents TEST REPORT...............................................................................................................................................................................1 1 TEST RESULT CERTIFICATION............................................................................................................................................... 3 2 EUT TECHNICAL DESCRIPTION..............................................................................................................................................4 3 SUMMARY OF TEST RESULT...................................................................................................................................................5 4 TEST METHODOLOGY...............................................................................................................................................................6 4.1 GENERAL DESCRIPTION OF APPLIED STANDARDS...................................................................................................6 4.2 MEASUREMENT EQUIPMENT USED...............................................................................................................................6 4.3 DESCRIPTION OF TEST MODES....................................................................................................................................... 7 5 FACILITIES AND ACCREDITATIONS......................................................................................................................................8 5.1 FACILITIES............................................................................................................................................................................8 5.2 LABORATORY ACCREDITATIONS AND LISTINGS......................................................................................................8 6 TEST SYSTEM UNCERTAINTY.................................................................................................................................................9 7 SETUP OF EQUIPMENT UNDER TEST...................................................................................................................................10 7.1 RADIO FREQUENCY TEST SETUP 1...............................................................................................................................10 7.2 RADIO FREQUENCY TEST SETUP 2...............................................................................................................................10 7.3 CONDUCTED EMISSION TEST SETUP...........................................................................................................................12 7.4 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM..........................................................................................13 7.5 SUPPORT EQUIPMENT..................................................................................................................................................... 13 8 FREQUENCY HOPPING SYSTEM REQUIREMENTS...........................................................................................................14 8.1 Standard Applicable..............................................................................................................................................................14 8.2 EUT Pseudorandom Frequency Hopping Sequence............................................................................................................. 14 8.3 Equal Hopping Frequency Use..............................................................................................................................................15 8.4 Frequency Hopping System.................................................................................................................................................. 15 9 TEST REQUIREMENTS.............................................................................................................................................................16 9.1 20DB BANDWIDTH............................................................................................................................................................16 9.2 CARRIER FREQUENCY SEPARATION...........................................................................................................................23 9.3 NUMBER OF HOPPING FREQUENCIES......................................................................................................................... 29 9.4 AVERAGE TIME OF OCCUPANCY (DWELL TIME).....................................................................................................31 9.5 MAXIMUM PEAK CONDUCTED OUTPUT POWER......................................................................................................34 9.6 CONDUCTED SUPRIOUS EMISSION..............................................................................................................................40 9.7 RADIATED SPURIOUS EMISSION.................................................................................................................................. 47 9.8 CONDUCTED EMISSI…

Text truncated - open the document above for the full version.

FCC ID: EMOICVBT40A