EMOIDM8Portable Rechargeable Bluetooth Speaker

iDM8 instruction manual iDM8 IB Size: 153mm x 120mm Printing color: Black Dec 1, 11. P1 portable rechargeable Bluetooth speaker iDM8 Introduction Thank you for purchasing the iHome iDM8. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as benzene, thinner or similar materials can damage the surface of the unit. P2 SRS WOW®, which features TruBass®, significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass and high frequency clarity for crisp detail. is a registered trademark of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc. iDM8 FCC Information This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference you can try one or more of the following corrective measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the radio or TV. • Use outlets on different electrical circuits for the equipment and the radio or TV. • Consult your dealer or an experienced radio/television technician if the problem still exists. Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. P3 FCC ID: EMOIDM8 IC: 986B-IDM8 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-102 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. iDM8 Table of Contents Meet Your iDM8...........................................................................................................1-2 Charging the Unit.............................................................................................................3 Using Bluetooth:Pairing Your Device.....................................................................................4 Playing Audio Via Bluetooth................................................................................................5 Playing Audio Via Aux.......................................................................................................6 Internal Rechargeable Lithium-ion Battery...............................................................................7 Consumer Product Safety Guide.......................................................................................8-9 Troubleshooting..............................................................................................................10 Warranty......................................................................................................................11 P4 Meet Your iDM8 iDM8 1 Lock/Aux/Bluetooth Switch Bottom P5 Power/Charging/Pairing Indicator Light Micro USB Charging Port Play/Pause/Pairing Button Power Button Volume Down Button Volume Up Button Back Left SideRight Side iDM8 2 Included Travel Lock (bottom of unit) • iDM8 system • Micro USB to USB/3.5 mm audio cable P6 The unit includes a travel lock position (left) to save battery life and prevent inadvertent button activation when in transit. When in the travel lock position, all functions are disabled. Make sure the switch is in Bluetooth position (right) for use with a Bluetooth device or in Aux position (center) for use with any other audio device connected via the audio cable iDM8 Using the Charging the Unit 1. Connect the micro USB plug to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, charge unit for about 8 hours. 3. A green light flashes while the unit is charging and glows steadily when unit is fully charged. If unit is not powered on when micro USB plug is connected, the green light flashes once to indicate unit is charging. 3 P7 NOTE: When unit is on and not connected to power source, flashing green light indicates battery needs charging. USB 2.0 iDM8 Using the 4 Using Bluetooth: Pairing Your Device P8 NOTE: See the iDM8 Bluetooth Connection Guide for complete pairing details. 1. Move the Lock/Aux/Bluetooth Switch t…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Project No.: 1111C058 Page 2 of 12 1111C058 1111C058 Neutron Engineering Inc. Project No.: 1111C058 Page 2 of 12 1111C058 1111C058 Neutron Engineering Inc. Project No.: 1111C058 Page 3 of 12 1111C058 1111C058 Neutron Engineering Inc. Project No.: 1111C058 Page 3 of 12 1111C058 1111C058

iDM8 Date code location iDM8 Model plate - Bottom of unit Material: black color PC Sheet Size: 41W x 30H mm Print: PMS 429c (text) Nov 22,11 FCC ID: EMOIDM8 IC: 986B-IDM8 Rechargeable Battery: DC 3.7V 1350mAh Service No: iDM8-A-A Mfd & Serviced by SDI Technologies Inc. Toll Free: 1 (800) 288 2792 www.ihomeaudio.com Patents: www.ihomeaudio.com/patents Made in China

Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 4 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 5 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 6 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 7 of 12 1111C05 8 Neutron Engineering Inc. 1111 C 05 8 Project No.: 1111C058 Page 8 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 9 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 10 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 11 of 12 1111C05 8 Neutron Engineering Inc. 1111C05 8 Project No.: 1111C058 Page 12 of 12 1111C05 8

Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 1 of 122 FCC/IC Radio Test Report FCC ID: EMOIDM8 IC: 986B-IDM8 This report concerns (check one) : Original Grant Class II Change Issued Date : Nov. 25, 2011 Project No. : 1111C058 Equipment : Portable Rechargeable Bluetooth Speaker Model Name for FCC : iDM8; iDM8X Model Name for IC iDM8 Applicant : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Nov. 07, 2011 Date of Test: Nov. 07, 2011 ~ Nov. 24, 2011 Testing Engineer : (Ivan Cao) Technical Manager : (Leo Heng) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 2 of 122 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 3 of 122 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BELOW 30MHZ) 23 4.2.8 TEST RESULTS (BETWEEN30 – 1000 MHZ) 24 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 38 5 . NUMBER OF HOPPING CHANNEL 74 5.1 APPLIED PROCEDURES / LIMIT 74 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 74 5.1.2 TEST PROCEDURE 74 5.1.3 DEVIATION FROM STANDARD 74 5.1.4 TEST SETUP 74 5.1.5 EUT OPERATION CONDITIONS 74 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 4 of 122 Table of Contents Page 5.1.6 TEST RESULTS 75 6 . AVERAGE TIME OF OCCUPANCY 77 6.1 APPLIED PROCEDURES / LIMIT 77 6.1.1 MEASUREMENT INSTRUMENTS LIST 77 6.1.2 TEST PROCEDURE 77 6.1.3 DEVIATION FROM STANDARD 77 6.1.4 TEST SETUP 78 6.1.5 EUT OPERATION CONDITIONS 78 6.1.6 TEST RESULTS 79 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 91 7.1 APPLIED PROCEDURES / LIMIT 91 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 91 7.1.2 TEST PROCEDURE 91 7.1.3 DEVIATION FROM STANDARD 91 7.1.4 TEST SETUP 91 7.1.5 EUT OPERATION CONDITIONS 91 7.1.6 TEST RESULTS 92 8 . BANDWIDTH TEST 96 8.1 APPLIED PROCEDURES / LIMIT 96 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 96 8.1.2 TEST PROCEDURE 96 8.1.3 DEVIATION FROM STANDARD 96 8.1.4 TEST SETUP 96 8.1.5 EUT OPERATION CONDITIONS 96 8.1.6 TEST RESULTS 97 9 . PEAK OUTPUT POWER TEST 101 9.1 APPLIED PROCEDURES / LIMIT 101 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 101 9.1.2 TEST PROCEDURE 101 9.1.3 DEVIATION FROM STANDARD 101 9.1.4 TEST SETUP 101 9.1.5 EUT OPERATION CONDITIONS 101 9.1.6 TEST RESULTS 102 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 106 10.1 APPLIED PROCEDURES / LIMIT 106 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 106 10.1.2 TEST PROCEDURE 106 10.1.3 DEVIATION FROM STANDARD 106 10.1.4 TEST SETUP 106 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 5 of 122 Table of Contents Page 10.1.5 EUT OPERATION CONDITIONS 106 10.1.6 TEST RESULTS 107 11 . EUT TEST PHOTO 119 Neutron Engineering Inc. Report No.: NEI-FICP-1-1111C058 Page 6 of 122 1. CERTIFICATION E q u i p m e n t : Portable Rechargeable Bluetooth Speaker Brand Name : iHome Model Name for FCC : iDM8; iDM8X Model Name for IC : iDM8 A p p l i c a n t : SDI TECHNOLOGIES INC. F a c t o r y : Winty Industries Corporation (Shen Zhen) Co. Ltd. A d d r e s s : San Lian Industry Zone. Shi Yan Town, Bao An District, ShenZhen, China Date of Test : Nov. 07, 2011 ~ Nov. 24, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2003 / ANSI C63.10:2009 / FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and…

Text truncated - open the document above for the full version.