EMOIUVBT1ABluetooth Alarm Clock with UV Sanitizing and USB charging

Model: iUVBT1 QSG Instruction manual - US English Size: 400mm(W) x 150mm(H) Folded Size: 80 x 150 mm 157g Art paper / 1C + 1C / Straight corners July 7, 2020 IMPORTANT SAFETY INSTRUCTIONS Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference. WARNING - DO NOT ATTEMPT TO OPERATE THIS DEVICE WITH THE LID/TOP OPEN. The device was designed to shut off automatically when the lid/top is open. It is important NOT to defeat or tamper with this safety feature as UVC light can cause damage to eyesight and skin. All users should be alerted to the potential hazards indicated by the product safety labeling on the unit and these instructions. WARNING - Use this device only for its intended use as described in this manual. If the device is not used in the manner specified, the protection provided by the equipment may be compromised. Always place device on a flat, smooth surface, in a horizontal position for operational use. WARNING- KEEP OUT OF REACH OF CHILDREN. This device is not a toy and is not intended to be used by children. ATTENTION: Use only the supplied power adapter. This product must only be supplied at safety extra low voltage corresponding to the marking on the appliance. ATTENTION: Prolonged or excessive exposure to UV-C light may degrade and discolor fabrics, plastics and other non-metallic materials. Keep operation away from strong magnetic fields. • Do not look directly at the UV-C source. • Device is intended for indoor use only, do not use outdoors or on wet surfaces. • Device should be protected from the elements and from temperatures below freezing. • Do not operate/drop near water or while bathing or swimming, do not handle the device with wet hands. • Only use as intended. Use according to this manual’s instructions without tampering or modifying the device in any way. • Do not alter the construction or design. Do not remove safety labels, markings or devices. • Do not use device for other than its intended purpose, as described in the manual. • Do not operate if any damage to the unit is visible or suspected, such as after being dropped. • Do not use if charging cable/cord is damaged. • Keep the cable/cords and device away from heated surfaces. • Close supervision is necessary when any appliance device is used by or near children and people with special needs. • Do not operate in the presence of explosives and/or flammable fumes, smoke or liquids. Disclaimer: This product is not intended to diagnose, treat, cure or prevent any disease or medical condition. The information provided herein is not to be construed as a medical diagnosis or medical advice. No medical claims are implied or intended with the sale of this device. Purchaser accepts responsibility for correct and proper use of device. 1 Year Limited Warranty For warranty and full instructions, visit ihome.com/support © 2020 SDI Technologies, Inc. All rights reserved. Questions? Visit www.ihome.com Model: iUVBT1 Quick Start Guide QUESTIONS? visit www.ihome.com • Do not ingest the battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. • Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.” • Attention should be drawn to the environmental aspects of battery disposal. Maintenance + Caring For Your Device • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Remove the plastic protective film from the clock display. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Should the casing of your device become soiled, you may wipe down with a moist cloth. • Do not immerse the device into water or any cleaning solvents. • Do NOT use gasoline, benzene, thinner, harsh cleaners, etc on and/or in the unit while cleaning, as they may damage the product. NEVER use alcohol or other solvents. iUVBT1-QSG-070720-A Printed in China HEALTH 360° UV-C Sanitizer with Bluetooth Speaker TOP PANEL BACK PANEL DISPLAY BOTTOM PANEL BACKUP BATTERY Alarm 1 Alarm 2 Power (Speaker)/ Alarm Reset Sanitize Volume Controls Play/Pause Snooze Battery Back-up Compartment* *Remove battery pull tab before use PM Indicator Bluetooth Status Alarm 1 Alarm 2 Low Backup Battery UNDER THE LID USB Port #2 Sanitizing Chamber DC 9V/3.0A 9V, 3A9V, 3A BluetoothBluetooth TimeTime SetSet DSTDST SetSet +1+1 A -1-1 DCDC inputinput FRONT PANEL LED Status Indicator FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful int…

Text truncated - open the document above for the full version.

Rev11/20/07 SDITechnologiesInc. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:EMOIUVBT1A PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram Schematics OperationalDescription Block SCH OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,Wealsorequestingthe commissiontograntshort-termconfidentialityrequestonthefollowingattachmentsuntil180 daysaftertheGrantDateofEquipmentAuthorizations. ExhibitTypeFileName ManualUsermanual Sincerely, DavidStetin 2020-08-07

SDITechnologiesInc. Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodel numberandcolorofappearance. ProductionnameTrademarkFCCModelno. BluetoothAlarmClockwith UVSanitizingandUSB charging iHome EMOIUVBT1AiUVBT1,iUVBT1X (Xcould1or3digitsbyany alphabetsdenotedifferent cabinetcolor) Confirmedby: DavidStetin 2020-08-07

SDITechnologiesInc. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2020-08-07 SUBJECT:FCCApplicationfor(FCCID:EMOIUVBT1A) ToWhomItMayConcern: We,theundersigned,herebyauthorizeEMTEK(DONGGUAN)CO.,LTD.atSamLvon ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(DONGGUAN)CO.,LTD.onourbehalfshallhave thesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, DavidStetin 2020-08-07

FCCID:EMOIUVBT1A

Title: Version : 14 Designer: Nick Silvestri Date: 06.29.2020 Model #: iUVBT1 GAW CONFIDENTIAL and PROPRIETARY: The information contained herein including, but not limited to the products, renderings, concepts and designs comprise intellectual property of SDI Technologies Inc. and shall be kept SDI Technologies Inc. Bluetooth Alarm Clock with UV Sanitizing 75mm 25.82 Appearance of display behind Glossy Black Part (ref. iW18) ORANGE - Screen Print PINK - Deboss 0.3mm GREEN - Emboss 0.3mm GREEN - Emboss 0.3mm 37mm37mm PC Sheet Insert (see DL for color information) DO NOT ATTEMPT TO OPERATE THIS DEVICE WITH THE LID OPEN. DO NOT TAMPER WITH THE AUTO-SHUTOFF SAFETY FEATURE AS PROLONGED EXPOSURE TO UV-C LIGHT MAY CAUSE DAMAGE TO EYES OR SKIN 9V, 3A Bluetooth Time Set DST Set +1 A -1 BACKUP BATTERY PULL TAB (silkscreen Black on Clear Label) DC input Stamped Silver iHome badge Black text PINK - Deboss 0.3mm PC Sheet Insert (see DL for color information) Cool grey 8C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3(B) /NMB-3(B) BACKUP BATTERY USB Output: DC 5V, 1A x 2 Service No: iUVBT1-A-A AC Adaptor: DC 9V, 3A Clock Backup: DC 3V, CR2450 x 1 MODEL iUVBT1 Made in ChinaPatents: www.ihome.com/patents FCC ID: EMOIUVBT1A IC: 986B-IUVBT1A HVIN: iUVBT1a Mfd. & Srvcd. by SDI Technologies, Inc. Designed & Engineered in the USA Size: 71mmW X 26.9mmH www.ihome.com iUVBT1 2023 2021 2024 2022 2020 iUVBT1 2023 2021 2024 2022 2020 Silkscreen print PMS Cool Gray 6 Silkscreen print PMS Cool Gray 6 Produced in EPA Establishment No. 96910-CHN-1 for SDI Technologies Inc. - Pantone 2747C - Glossy nish - Residue-free adhesive Removeable POP Label diecut line Silkscreen print PMS Cool Gray 8 June 29, 2020 June 10, 2020 June 10, 2020 3mm June 11, 2020 DO NOT ATTEMPT TO OPERATE THIS DEVICE WITH THE LID OPEN. DO NOT TAMPER WITH THE AUTO-SHUTOFF SAFETY FEATURE AS PROLONGED EXPOSURE TO UV-C LIGHT MAY CAUSE DAMAGE TO EYES OR SKIN Produced in EPA Establishment No. 96910-CHN-1 for SDI Technologies Inc. size: 71.6 W x 11.8 H (mm) Corner Radius: 2mm Lable: Glossy, permanent (not suggest paper material) June 30, 2020 updated “96910-CHN-1“

FCCID:EMOIUVBT1A BT Antenna

RFEXPOSUREEVALUATION EUTSpecification EUTBluetoothAlarmClockwithUVSanitizingandUSB charging ModelNumber iBTW88 FCCIDEMOIUVBT1A Antennagain(Max)0.5dBi OperationFrequency2402-2480MHz InputRatingDC9Vformadapter ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 KindofDevice:BluetoothVer.4.2 ModulationBT:(GFSK,π/4-DQPSK,8DPSK) Max.outputpowerBT:0.07dBm(0.001016W) TestRequirement: RFEXPOSUREEVALUATION AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeusedto evaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF)Radiationas specifiedin§1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) Power Density(mW/cm 2 ) Average Time (A)LimitsforOccupational/ControlExposures 300-1500----F/3006 1500-100000----56 (B)LimitsforGeneralPopulation/UncontrolExposures 300-1500----F/15006 1500-100000----130 1Friistransmissionformula:Pd=(Pout*G)\(4*pi*R 2 ) Where Pd=PowerdensityinmW/cm 2 Pout=outputpowertoantennainmW G=Numericgainoftheantennarelativetoisotropicantenna Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainofthendtotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancewheretheMPElimitis reached. 2MeasurementResult Antennagain:0.5dBi BTDSS: Signature: SamLv Date:2020-08-10

Report No. ES200716001WPage 1 of 74 Ver.1.0 TEST REPORT Product Name ： Bluetooth Alarm Clock with UV Sanitizing and USB charging Model Number ： iUVBT1, iUVBT1X (X could 1 or 3 digits by any alphabets denote different cabinet color) FCC ID ： EMOIUVBT1A Prepared for:SDI Technologies Inc. Address:1299, Main Street, Rahway, NJ 07065, U.S.A. Prepared by:EMTEK (SHENZHEN) CO., LTD. Address:Building 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number:ES200716001W Date(s) of Tests:July 17, 2020 to August 04, 2020 Date of issue:August 05, 2020 $二维码$ Report No. ES200716001WPage 2 of 74 Ver.1.0 VERIFICATION OF COMPLIANCE Applicant: SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. Manufacturer: SDI Technologies Inc. 1299, Main Street, Rahway, NJ 07065, U.S.A. Factory:Shenzhen Inecan Electronic Co., Ltd. 1704, Fo Tan Industrial Centre, 26-28 Au Pui Wan St., Fo Tan, Hong Kong Product Description:Bluetooth Alarm Clock with UV Sanitizing and USB charging Trade Mark:iHome Model Number: iUVBT1, iUVBT1X (X could 1 or 3 digits by any alphabets denote different cabinet color) We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2018). Date of Test: July 17, 2020 to August 04, 2020 Prepared by: Loren Luo /Editor Reviewer: Tim Dong /Supervisor Approved & Authorized Signer : Lisa Wang /Manager Report No. ES200716001WPage 3 of 74 Ver.1.0 Modified Information VersionSummaryRevision DateReport No. Ver.1.0Original Report/ES200716001W Report No. ES200716001WPage 4 of 74 Ver.1.0 Table of Contents 1. GENERAL INFORMATION..........................................................................................................6 1.1 PRODUCTDESCRIPTION..............................................................................................................................6 1.2 TESTMETHODOLOGY...................................................................................................................................7 1.3 TESTFACILITY..............................................................................................................................................8 2. SYSTEM TEST CONFIGURATION...............................................................................................9 2.1EUT CONFIGURATION...................................................................................................................................9 2.2 EUT EXERCISE......................................................................................................................................9 2.3 TESTPROCEDURE......................................................................................................................................9 2.4CONFIGURATION OFTESTEDSYSTEM.......................................................................................................10 3. SUMMARY OF TEST RESULTS.................................................................................................11 4. DESCRIPTION OF TEST MODES...............................................................................................12 5. TEST SYSTEM UNCERTAINTY..................................................................................................13 6. CONDUCTED EMISSIONS TEST................................................................................................14 6.1MEASUREMENTPROCEDURE:.....................................................................................................................14 6.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)..........................................................................14 6.3MEASUREMENTEQUIPMENTUSED:...........................................................................................................14 6.4 MEASUREMENTRESULT:...........................................................................................................................15 6.5 CONDUCTEDMEASUREMENTPHOTOS:....................................................................................................18 7. RADIATED EMISSION TEST........................................................................................................19 7.1MEASUREMENTPROCEDURE......................................................................................................................19 7.2TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)...........................................................................21 7.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................22 7.4 RADIATEDEMISSIONLIMIT........................................................................................................................23 7.5 MEASUREMENTRESULT..........................................................................................................................24 7.5 RADIATEDMEASUREMENTPHOTOS:.........................................................................................................29 8. CHANNEL SEPARATION TEST..................................................................................................30 8.1MEASUREMENTPROCEDURE......................................................................................................................30 8.2TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)...........................................................................30 8.3 MEASUREMENTEQUIPMENTUSED:..........................................................................................................30 8.4MEASUREMENTRESULTS:............................…

Text truncated - open the document above for the full version.

FCCID:EMOIUVBT1A