EMOSIB62Bluetooth FM Clock Radio with USB Charging

Si-B62 instruction manual Si-B62 Eng IB Size: 153mm x 120mm Printing color: Black June 6, 2014 P1 Bluetooth FM Clock Radio with USB Charging Si-B62 Introduction Thank you for purchasing the iHome Si-B62. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit. P2 1 Si-B62 P3 2 FCC ID: EMOSIB62 IC: 986B-SIB62 QDID:B020022 FCC Information This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B) IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. 6/06/2014 Si-B62 Table of Contents Meet Your Si-B62 ....................................................................................................................5 The Display/Setting Up the Unit .................................................................................................6 Replacing and Installing Clock Backup Batteries ............................................................................7 Setting the Clock/ FM Radio .....................................................................................................8 Setting and Using FM Presets.....................................................................................................9 Setting and Using the Alarms ...................................................................................................10 Previewing Alarms and Turning Alarms On/Off ..........................................................................10 Snooze/Dimmer Button/Sleep Mode .......................................................................................11 Using Bluetooth: Pairing Your Device ........................................................................................12 Pairing Your Device Using Standard Bluetooth .............................................................................13 Pairing with a Different Device.................................................................................................13 Playing Audio Via Bluetooth/Playing Audio Via Aux-in..................................................................14 Charging Devices via USB Port ...............................................................................................15 Troubleshooting .....................................................................................................................16 Consumer Product Safety Guide ...............................................................................................17 Warranty.............................................................................................................................18 P4P5 Included • Si-B62 unit …

Text truncated - open the document above for the full version.

Project No.: 1405C269 Page 2 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 3 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 4 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 5 of 14 Neutron Engineering Inc.

DC 1.5V UM-4 "AAA" R03 SIZE DC 1.5V UM-4 "AAA" R03 SIZE SI-B62 Bottom panel April 25, 2014 Emboss: 0.3mm CAN ICES-3(B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Si-B62 Model plate June 04, 2014 recess size: 47.5 x 14.9mm color: White background with black printing material: 0.3 PC Frequency Range : FM 87.5 - 107.9 MHz Clock Backup: DC 3V, battery size “AAA” (R03) x 2 AC Adaptor: DC 5 V, 2A Service No: SiB62-A-A Used Under License. eKids/KIDdesigns, Inc. iHome® is a registered trademark of SDI Technologies Inc., Used under license. Model: Si-B62 FCC ID: EMOSIB62 IC: 986B-SIB62 1-800-288-2792 Patents: www.ekids.com/patents Made in China

Project No.: 1405C269 Page 6 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 7 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 8 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 9 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 10 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 11 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 12 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 13 of 14 Neutron Engineering Inc. Project No.: 1405C269 Page 14 of 14 Neutron Engineering Inc.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 1 of 111 FCC&IC Radio Test Report FCC ID: EMOSIB62 IC: 986B-SIB62 This report concerns (check one): Original Grant Class II Change Project No. : 1405C269 Equipment : Bluetooth FM Clock Radio with USB Charging Model Name For FCC : Si-B62;Si-B62X Model Name For IC : Si-B62 Applicant : SDI TECHNOLOGIES INC Address : 1299 Main Street, Rahway, NJ 07065, U.S.A Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: May. 27, 2014 Date of Test: May. 27, 2014~ Jun. 09, 2014 Issued Date: Jun. 10, 2014 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: 0769-8318-3000 FAX: 0769-8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 2 of 111 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 3 of 111 Table of Contents Page 1 . CERTIFICATION 7 2 . SUMMARY OF TEST RESULTS 8 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 TEST PROCEDURE 14 4.1.3 DEVIATION FROM TEST STANDARD 14 4.1.4 TEST SETUP 15 4.1.5 EUT OPERATING CONDITIONS 15 4.1.6 EUT TEST CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 18 4.2.5 EUT OPERATING CONDITIONS 19 4.2.6 EUT TEST CONDITIONS 19 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 19 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 20 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 20 5 . NUMBER OF HOPPING CHANNEL 21 5.1 APPLIED PROCEDURES 21 5.1.1 TEST PROCEDURE 21 5.1.2 DEVIATION FROM STANDARD 21 5.1.3 TEST SETUP 21 5.1.4 EUT OPERATION CONDITIONS 21 5.1.5 EUT TEST CONDITIONS 21 5.1.6 TEST RESULTS 21 Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 4 of 111 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 22 6.1 APPLIED PROCEDURES / LIMIT 22 6.1.1 TEST PROCEDURE 22 6.1.2 DEVIATION FROM STANDARD 22 6.1.3 TEST SETUP 22 6.1.4 EUT OPERATION CONDITIONS 23 6.1.5 EUT TEST CONDITIONS 23 6.1.6 TEST RESULTS 23 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 24 7.1 APPLIED PROCEDURES / LIMIT 24 7.1.1 TEST PROCEDURE 24 7.1.2 DEVIATION FROM STANDARD 24 7.1.3 TEST SETUP 24 7.1.4 EUT TEST CONDITIONS 24 7.1.5 TEST RESULTS 24 8 . BANDWIDTH TEST 25 8.1 APPLIED PROCEDURES 25 8.1.1 TEST PROCEDURE 25 8.1.2 DEVIATION FROM STANDARD 25 8.1.3 TEST SETUP 25 8.1.4 EUT OPERATION CONDITIONS 25 8.1.5 EUT TEST CONDITIONS 25 8.1.6 TEST RESULTS 25 9 . PEAK OUTPUT POWER TEST 26 9.1 APPLIED PROCEDURES / LIMIT 26 9.1.1 TEST PROCEDURE 26 9.1.2 DEVIATION FROM STANDARD 26 9.1.3 TEST SETUP 26 9.1.4 EUT OPERATION CONDITIONS 26 9.1.5 EUT TEST CONDITIONS 26 9.1.6 TEST RESULTS 26 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 27 10.1 APPLIED PROCEDURES / LIMIT 27 10.1.1 TEST PROCEDURE 27 10.1.2 DEVIATION FROM STANDARD 27 10.1.3 TEST SETUP 27 10.1.4 EUT OPERATION CONDITIONS 27 10.1.5 EUT TEST CONDITIONS 27 10.1.6 TEST RESULTS 27 11 . MEASUREMENT INSTRUMENTS LIST 28 Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 5 of 111 Table of Contents Page 12 . EUT TEST PHOTO 30 ATTACHMENT A - CONDUCTED EMISSION 34 ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 37 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 39 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 46 ATTACHMENT E - NUMBER OF HOPPING CHANNEL 71 ATTACHMENT F - AVERAGE TIME OF OCCUPANCY 73 ATTACHMENT G - HOPPING CHANNEL SEPARATION MEASUREMENT 86 ATTACHMENT H - BANDWIDTH 91 ATTACHMENT I - PEAK OUTPUT POWER 96 ATTACHMENT J - ANTENNA CONDUCTED SPURIOUS EMISSION 101 Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 6 of 111 REPORT ISSUED HISTORY Issued No. Description Issued Date NEI-FICP-1-1405C269 Original Issue. Jun. 10, 2014 Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 7 of 111 1. CERTIFICATION Equipment : Bluetooth FM Clock Radio with USB Charging Brand Name : iHome; HELLO KITTY Model Name For FCC : Si-B62;Si-B62X Model Name For IC : Si-B62 Applicant SDI TECHNOLOGIES INC. Manufacturer : SDI TECHNOLOGIES INC. Address : 1299 Main Street, Rahway, NJ 07065, U.S. A Factory : J…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 30 of 111 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 31 of 111 Radiated Measurement Photos 9KHz to 30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 32 of 111 Radiated Measurement Photos 30MHz to 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1405C269 Page 33 of 111 Radiated Measurement Photos Above 1000MHz