ESX-CRASHERBluetooth Speaker

CRASHER-BLK-BOX BLUETOOTH SPEAKER INSTRUCTION MANUAL INTRODUCTION Thank you for purchasing the Crasher. We are excited to welcome you to the JLab community. As an owner of the Crasher portable Bluetooth speaker, we are here to help assist you with any product questions or issues that come your way. The Crasher Bluetooth wireless speaker system applies the latest Bluetooth wireless technology that enables you to enjoy wireless music, audio, and hands free calls wherever you want. WHAT’S INCLUDED 1. The Crasher Bluetooth stereo speaker 2. USB to Micro USB charging cable 3. 3.5mm to 3.5mm AUX audio cable 4. Power adapter with USB jack 5. Soft carrying pouch FEATURES & BENEFITS 1. Bluetooth Wireless Connectivity 2. Quality Hi-Fi stereo sound 3. Hands free call control 4. Built In Battery Power Pack to charge your devices via full sized USB port 5. Use up to 33 feet away 6. Around 18 hours of operation time (median volume level) GET TO KNOW THE CRASHER 1. Power On/Off Control 2. Battery Check / Bluetooth Pair Button 3. Pairing/Battery Check LED Indicators 4. Charging Red/Green LED Indicator 5. 3.5mm Audio In Jack to connect non BT devices 6. Micro USB Charge In Jack for charging the speaker 7. Telephone Call Button 8. Volume + 9. Volume – 10. USB Charging Out Jack (to external portable devices) 11. Microphone location 12. Speaker Drivers 13. Back Passive Woofer (located on back panel of unit) 1st Step - CHARGING THE CRASHER 1. Make sure the speaker is fully charged before initial use. 2. Connect the speaker via the Micro USB port (see item 6 above) to your PC or wall outlet using the Micro USB cable and/or 5V Power Adapter. 3. The Battery LED (see item 4 above) will illuminate in red while charging and should become green once fully charged.. Another way to check if fully charged, is to click the Battery Check button once (see item 2 above). If all 4 LED indicators light up, your Crasher is almost or fully charged. If only 1 – 3 of the LED lights light up, please continue charging your device. 4. JLab recommends charging the Crasher overnight with the Micro USB for optimum performance. 5. If you encounter any issues while using your Crasher, please first check to ensure device is fully charged before troubleshooting the issue and contacting Support. 2nd Step - POWER UP 1. Once the Crasher is fully charged, locate the Power Button toggle switch (see item 1 above). 2. Slide toggle to the right to power on. LED lights and sound should further indicate that the Crasher is on. 3. To power off, slide toggle to the left. 3rd Step - GET CONNECTED VIA BLUETOOTH 1. Make sure the Crasher is turned ON (See 1st and 2nd Step) 2. Press the Pair/Battery Check button and hold for about 5 seconds or until the 4 LEDs flash. 3. Enable the searching mode on your Bluetooth compatible device. (Most commonly found on your smartphone under Settings, then Bluetooth, then by turning BT On / Searching for Devices.) 4. Select “JLab Crasher” in the list shown on your Bluetooth device / smartphone. 5. Enter “0000” if a password is required. 6. When the Bluetooth connection is made, the first LED will flash slowly. Please allow 10 – 20 seconds for your device to connect. 7. Once connected, select your music, videos or calls and see your sound instantly amplified with the JLab Crasher. 8. Please note, only one device may be connected at a time. To connect another Bluetooth device, you must disconnect with the Crasher from your device / smartphone. 9. To reset the Crasher and void any existing connections, hold down the Pair/Battery Check button (see item 2 above) for 12 – 15 seconds until the 4 LED lights begin to blink MAKE & RECEIVE TELEPHONE CALLS 1. If a call is received while streaming music on speaker, the music will be muted and a ring tone will be heard in its place. 2. Answer and end calls by pressing the talk button once (see item 7 above). 3. Make calls by dialing on the cell phone and talking towards the speaker. Talk at a normal volume from 3 – 5 feet away. 4. To decline an incoming call, hold the talk button (see item 7 above) for 2 – 3 seconds or until the phone call stops ringing and returns to your music. 4. Check the instruction manual for your cell phone to ensure no further steps are required. PLUG & PLAY NON BT DEVICES WITH AUX CABLE 1. Connect the speaker with almost any audio device directly by using the supplied 3.5mm cable. 2. Connect one end of the 3.5mm cable to the audio in port on the Crasher (see item 5 above) and the other end of the cable to the 3.5mm audio port on your favorite devices. 3. While connected, this 3.5mm aux line in will override any Bluetooth wireless music being played. Once the 3.5mm device is disconnected from the aux connection, the Crasher will return to the music on the Bluetooth connected device. 4. When connected via the 3.5mm aux cable, the Crasher's volume control is overridden by the volume settings of your device. As you would headphones, volume should be controlled through your audio device when connected via aux. CHECK THE BATTERY LIFE 1. The speaker is designed with a smart battery check feature for your convenience. 2. One click of the battery check button (see item 2 above) will show you the current battery capacity on your Crasher 4 LEDs light up = app. 100%full 3 LEDs light up = app. 75% full 2 LEDs light up = app. 50% full 1 LED lights up = app. 25% full (indicating charging is needed) CHARGE YOUR PORTABLE DEVICES ON THE GO 1. The Crasher delivers a portable battery pack that can charge your favorite music devices on-the-go including smartphones, iPhones, MP3 Players and more. 2. Connect your portable device with its own charging cable (not included) to the USB jack on the Crasher speaker (see item 10 above). 3. This portable backup power supply allows you to listen to your music without interruption. 4. The built-in power pack will supply a current of 1A. This will charge most smartphones and portable devices. Some tablets, including the iPad, require at lea…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Vtrek Dewei Industrial Garden, Shibei Industrial Road, Dashi Town, Panyu Borough Guangzhou, Guangdong，China 2014/05/26 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd.. to act as a Certification Body for certifying for the following project(s): Product description: Bluetooth Speaker model name: CRASHER-BLK-BOX Additional Model:CRASHER-SLV-BOX, CRASHER-WHT-BOX FCC ID: ESX-CRASHER We affirm that between SIEMIC and __ Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd._, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature : Client’s name / title : Liao. xiaofei Contact information / address: Vtrek Dewei Industrial Garden,Shibei Industrial Road, Dashi Town, Panyu Borough, Guangzhou , Guangdong , China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Vtrek Dewei Industrial Garden, Shibei Industrial Road, Dashi Town, Panyu Borough Guangzhou, Guangdong，China 2014/05/26 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: ESX-CRASHER We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Liao. xiaofei Contact information / address: Vtrek Dewei Industrial Garden,Shibei Industrial Road, Dashi Town, Panyu Borough, Guangzhou , Guangdong , China

Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. **************************************************************************** I, the undersigned, hereby confirm that any of our production units bearing the following models numbers are said to be identical in cosmetics, materials, PCB layout, electrical, mechanical, and physical design, including software/firmware . The just the shell color is different. _. 1) Model No.: CRASHER-BLK-BOX 2) Model No.: CRASHER-WHT-BOX 3) Model No.: CRASHER-SLV-BOX I Client’s signature: Client’s name / title: Liao. xiaofei Contact information / address: Vtrek Dewei Industrial Garden,Shibei Industrial Road, Dashi Town, Panyu Borough, Guangzhou , Guangdong, China ****************************************************************************

FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 98 of 105 13. PHOTOS OF EUT External Photos M/N: CRASHER-BLK-BOX FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 99 of 105 External Photos M/N: CRASHER-BLK-BOX FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 100 of 105 External Photos M/N: CRASHER-BLK-BOX

FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 101 of 105 Internal Photos M/N: CRASHER-BLK-BOX FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 102 of 105 Internal Photos M/N: CRASHER-BLK-BOX FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 103 of 105 Internal Photos M/N: CRASHER-BLK-BOX Bluetooth Antenna FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 104 of 105 Internal Photos M/N: CRASHER-BLK-BOX FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 105 of 105 Adapter Photos

FCC ID:ESX-CRASHER FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Bluetooth Speaker Model Number: CRASHER-BLK-BOX Additional Model:CRASHER-SLV-BOX, CRASHER-WHT-BOX FCC ID: ESX-CRASHER Prepared for : Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Vtrek Dewei Industrial Garden,Shibei Industrial Road, Dashi Town, Panyu Borough, Guangzhou , Guangdong , China Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1405018 Date of Test : April 21,2014~ May 25, 2014 Date of Report : May 26, 2014 FCC ID:ESX-CRASHER 1. EXPOSURE EVALUATION OF PORTABLE OR MOBILE DEVICES Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. 2．SAR TEST EXCLUSION THRESHOLD FOR 100MHz to 6GHz and ≤50mm The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where •f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID:ESX-CRASHER 3. EVALUATION RESULTS Maximum measured transmitter power. Mode CH Peak output Power （dBm） Peak output Power （mW） Results 2402 -0.539 0.88 0.27 2441 1.415 1.39 0.43 GFSK 2480 2.014 1.59 0.50 2402 -2.475 0.57 0.18 2441 0.460 1.11 0.35 8-DPSK 2480 1.030 1.27 0.40 [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0 SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required. ====END====

FCC ID: ESX-CRASHER EST Technology Co.,Ltd Report No.ESTE-R1405017 Page 1 of 105 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Bluetooth Speaker Model Number: CRASHER-BLK-BOX Additional Model:CRASHER-SLV-BOX, CRASHER-WHT-BOX FCC ID: ESX-CRASHER Prepared for : Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Vtrek Dewei Industrial Garden,Shibei Industrial Road, Dashi Town, Panyu Borough, Guangzhou , Guangdong , China Prepared By : EST Technology Co., Ltd. Santun(guantai Road), Houjie Town, DongGuan City, GuangDong, China. Tel: 86-769-83081888-808 Report Number: ESTE-R1405017 Date of Test : April 21,2014~ May 25, 2014 Date of Report : May 26, 2014 FCC ID: ESX-CRASHER EST Technology Co.,Ltd Report No.ESTE-R1405017 Page 2 of 105 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION.........................................................................................................................3 1. GENERAL INFORMATION.................................................................................................................5 1.1. Description of Device (EUT) ........................................................................................................... 5 2. SUMMARY OF TEST.........................................................................................................................6 2.1. Summary of test result...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Assistant equipment used for test ..................................................................................................... 8 2.4. Block Diagram ................................................................................................................................. 8 2.5. Test mode ......................................................................................................................................... 9 2.6. Channel List for Bluetooth ............................................................................................................... 9 2.7. Test Equipment............................................................................................................................... 10 3. MAXIMUM PEAK OUTPUT POWER.................................................................................................11 3.1. Limit ............................................................................................................................................... 11 3.2. Test Procedure ................................................................................................................................ 11 3.3. Test Result ...................................................................................................................................... 11 3.4. Test Data ........................................................................................................................................ 12 4. 20 DB BANDWIDTH.......................................................................................................................16 4.1. Limit ............................................................................................................................................... 16 4.2. Test Procedure ................................................................................................................................ 16 4.3. Test Result ...................................................................................................................................... 16 4.4. Test Data ........................................................................................................................................ 17 5. CARRIER FREQUENCY SEPARATION..............................................................................................21 5.1. Limit ............................................................................................................................................... 21 5.2. Test Procedure ................................................................................................................................ 21 5.3. Test Result ...................................................................................................................................... 21 5.4. Test Data ........................................................................................................................................ 22 6. NUMBER OF HOPPING CHANNEL..................................................................................................26 6.1. Limit ............................................................................................................................................... 26 6.2. Test Procedure ................................................................................................................................ 26 6.3. Test Result ...................................................................................................................................... 26 6.4. Test Data ........................................................................................................................................ 27 7. DWELL TIME.................................................................................................................................29 7.1. Limit ............................................................................................................................................... 29 7.2. Test Result ...................................................................................................................................... 29 7.3. Test Data ...........................................................................…

Text truncated - open the document above for the full version.

FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 95 of 105 12. TEST SETUP PHOTO Conducted Test FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 96 of 105 Radiated Test (30-1000 MHz) FCC ID:ESX-CRASHER EST Technology Co.,Ltd Report No. ESTE-R1405017 Page 97 of 105 Radiated Test (1000-25000 MHz)