EW780-0148-002.4GHz Frequency Hopping Spread Spectrum Baby Monitor - Baby Unit

User’s manual VM314 Accessory baby unit for use with VTech model VM344 Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has instructions on how to set up and pair your new baby unit. For complete instructions on using the baby unit, see the user’s manual that comes with your video and audio monitor. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty! Visit www.vtechphones.com. Registration Register your product online for enhanced warranty support. Product news Learn about the latest VTech products. Connect the baby unit NOTES Use only the power adapter supplied with this product. Make sure the electrical outlet is not controlled by wall switch. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the baby unit and the power adapter cord are out of reach of children. • • • • a b c g h i j k d e l m f a b c g h i j k d e l m f a b c g h i j k d e l m f 1 Light sensor 2 Infrared LEDs 3 Camera 4 Microphone 5 -/VOL/+ Press to adjust the listening volume.• 6 Speaker 7 ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is pairing to the parent unit. • • 8 ON/OFF switch Slide to turn on or off the baby unit.• 9 Antenna 10 Temperature sensor 11 Power jack 12Threaded socket For wall mount installation use.• 13 PAIR Press and hold to pair to the parent unit when a desired baby unit slot is chosen at the parent unit. • Before use Pair extra new baby unit Each newly purchased baby unit (VM314) must be paired to your video and audio monitor system (VM344). NOTES You can pair a maximum of four baby units to your parent unit. Each new baby unit must be paired to the parent unit before use. Make sure you power on the parent unit before pairing. To pair a baby unit: Press MENU when the parent unit is not in use. Press or to choose Pair/Unpair CAM, then press SELECT to select. Press or to choose Pair CAM, then press SELECT to select. Press or to choose an empty baby unit slot, then press SELECT. The parent unit screen displays Press and hold the pair button at the CAM for 5 seconds until the power indicator flashes.. Immediately press and hold PAIR on the bottom of the baby unit. The LED light flashes quickly. When pairing is successful, the screen displays the view of newly paired baby unit in SINGLE-CAM mode. The LED light on the new baby unit remains on. NOTES If pairing fails, the screen displays Pairing failed. Try the pairing process again. Only one baby unit can be paired at a time. • • 1. 2. 3. 4. 5. • • To unpair a baby unit: NOTE Make sure you power on the baby unit and the parent unit before unpairing the baby unit. On the idle parent unit, press MENU. Press or to choose Pair/Unpair CAM, then press SELECT to select. Press or to choose Unpair CAM, then press SELECT to select. Press or to choose a desired baby unit, then press SELECT. Press on the parent unit when the screen displays To unpair CAM X, press the [ZOOM] key at the Parent Unit.. Press SELECT when the screen displays Then, press the [MENU/SELECT] key to confirm.. When unpairing is successful, the screen displays CAM X is unpaired and returns to previous menu. If there is no paired baby unit, the screen displays No CAM is paired.. The LED light on the selected baby unit flashes slowly. Positioning the baby monitor NOTE This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. CAUTION Keep the baby unit out of the reach of the baby. Never place or mount the baby unit inside the baby’s crib or playpen. Place the baby unit at least 1 meter / 3 feet away from your baby. At least 1 meter (3 feet) Place parent unit at least 1 meter / 3 feet away from the baby unit. At least 1 meter (3 feet) 1. 2. 3. 4. 5. 6. 7. 1. 2. NOTE If you experience audio feedback on either the parent unit or baby unit, move the parent unit further away until there is no more audio feedback; or press -/VOL on the parent unit to lower the audio feedback sound. TIP For desktop usage and/or wall mounting the baby unit, you can refer to Quick Start Guide. Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. General product care To keep this product working well and looking good, follow these guidelines: Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit is dry before you connect them to the mains again. Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Follow all warnings and instructions marked on the product. Adult setup is required. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. • • • • • • • 1. 2. 3. 4. 5. Use only the adapters included with this product. Incorrect adapter polari…

Text truncated - open the document above for the full version.

User’s manual VM344/VM344-2 Safe & Sound ® Pan & Tilt Full Color Video Monitor Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty! Visit www.vtechphones.com. Registration Register your product online for enhanced warranty support. Product news Learn about the latest VTech products. What’s in the boxInstall the battery You can power up the parent unit by connecting it to AC power or to the rechargeable battery provided. Even if the parent unit is connected to AC power, we recommend you also install the battery. This guarantees continual operation in case of a power outage. Install the battery as shown below. NOTES Make sure the label THIS SIDE UP is facing up while inserting the battery. NOTES The operating time for using the rechargeable battery is short. If you want to monitor your baby for a long time, we recommend you connect the parent unit to AC power. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. • • Connect and charge the battery NOTES Use only the battery supplied with this product. Use only the power adapters supplied with this product. Make sure the electrical outlets are not controlled by wall switches. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Connect the baby monitor • • • • • Charge the parent unit battery When you have connected the parent unit and installed its battery for the first time or after power outage, the parent unit powers on automatically. The battery icon indicates the battery status (see the following table). NOTES The parent unit battery is fully charged after 3 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery. Battery indicators Battery status Action The battery icon is off and displays. No battery is installed but operates using AC power, or the battery has been installed incorrectly. Install the parent unit battery. Charge without interruption (at least 30 minutes). The screen displays Battery low at Parent Unit and . The lightlight flashes. The battery has very little charge and may be used for only a short time. Charge without interruption (about 30 minutes). The battery icon becomes solid . The battery is fully charged. To keep the battery charged, connect it to AC power when not in use. • • • Before use You may test the baby monitor before initial use, and at regular times thereafter. To test your baby monitor: Place the parent unit and the baby unit in the same room to test the product. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit. Slide on the baby unit to turn it on. Upon initial use, the parent unit powers on automatically after connecting to AC power. The screen shows and Powering on.... NOTE If both units are not connected, the parent unit displays and then No link to CAM # (# represents the selected baby unit number) on the screen. The LINK light first flashes and then turns off. Move the parent unit closer to the baby unit. 1. 2. 3. Positioning the baby monitor NOTE This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. CAUTION Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen. Place the baby unit at least 1 meter / 3 feet away from your baby. Adjust the angle of the camera to aim at your baby. At least 1 meter (3 feet) Place parent unit at least 1 meter / 3 feet away from the baby unit. At least 1 meter (3 feet) NOTE If you experience audio feedback on either the parent unit or baby unit, move the parent unit further away until there is no more audio feedback. TIP If you cannot hear the sounds transmitted from the baby unit, you can choose a higher sound sensitivity level and increase the speaker volume of the parent unit. Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. 1. 2. Overview Baby unit overview a b c g h i j k d e l m f a b c g h i j k d e l m f a b c g h i j k d e l m f 1 Light sensor 2 Infrared LEDs 3 Camera 4 Microphone 5 -/VOL/+ Press to adjust the listening volume.• 6 Speaker 7 ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is pairing to the parent unit. • • 8 ON/OFF switch Slide to turn on or off the baby unit.• 9 Antenna 10 Temperature sensor 11 Power jack 12Threaded socket For wall mount installation use.• 13 PAIR Press and hold to pair to the parent unit when a desired baby unit slot is chosen at the parent unit. • Parent unit overview d e a b c 1LCD ON/OFF Press and hold to turn off the parent unit screen. VIEW Press to view the image of the next baby unit in SINGLE-CAM or PATROL mode. • • 2PATROL Press to turn on or off the PATROL mode. • 3SPLIT Press to turn on or off the SPLIT-VIEW mode. • 4 Speaker 5 Stand f g h i j k m n o p q r s l 6 Antenna 7 LED lights Indicate the different statuses of the parent unit. For details, refer to Parent unit lights. • 8 Microphone 9 Zoom While viewing image, press to zoom in or out. • 10 TALK While viewing image, press and hold to talk t…

Text truncated - open the document above for the full version.

User’s manual VM314 Accessory baby unit for use with VTech model VM344 Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has instructions on how to set up and pair your new baby unit. For complete instructions on using the baby unit, see the user’s manual that comes with your video and audio monitor. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty! Visit www.vtechphones.com. Registration Register your product online for enhanced warranty support. Product news Learn about the latest VTech products. Connect the baby unit NOTES Use only the power adapter supplied with this product. Make sure the electrical outlet is not controlled by wall switch. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the baby unit and the power adapter cord are out of reach of children. • • • • a b c g h i j k d e l m f a b c g h i j k d e l m f a b c g h i j k d e l m f 1 Light sensor 2 Infrared LEDs 3 Camera 4 Microphone 5 -/VOL/+ Press to adjust the listening volume.• 6 Speaker 7 ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is pairing to the parent unit. • • 8 ON/OFF switch Slide to turn on or off the baby unit.• 9 Antenna 10 Temperature sensor 11 Power jack 12Threaded socket For wall mount installation use.• 13 PAIR Press and hold to pair to the parent unit when a desired baby unit slot is chosen at the parent unit. • Before use Pair extra new baby unit Each newly purchased baby unit (VM314) must be paired to your video and audio monitor system (VM344). NOTES You can pair a maximum of four baby units to your parent unit. Each new baby unit must be paired to the parent unit before use. Make sure you power on the parent unit before pairing. To pair a baby unit: Press MENU when the parent unit is not in use. Press or to choose Pair/Unpair CAM, then press SELECT to select. Press or to choose Pair CAM, then press SELECT to select. Press or to choose an empty baby unit slot, then press SELECT. The parent unit screen displays Press and hold the pair button at the CAM for 5 seconds until the power indicator flashes.. Immediately press and hold PAIR on the bottom of the baby unit. The LED light flashes quickly. When pairing is successful, the screen displays the view of newly paired baby unit in SINGLE-CAM mode. The LED light on the new baby unit remains on. NOTES If pairing fails, the screen displays Pairing failed. Try the pairing process again. Only one baby unit can be paired at a time. • • 1. 2. 3. 4. 5. • • To unpair a baby unit: NOTE Make sure you power on the baby unit and the parent unit before unpairing the baby unit. On the idle parent unit, press MENU. Press or to choose Pair/Unpair CAM, then press SELECT to select. Press or to choose Unpair CAM, then press SELECT to select. Press or to choose a desired baby unit, then press SELECT. Press on the parent unit when the screen displays To unpair CAM X, press the [ZOOM] key at the Parent Unit.. Press SELECT when the screen displays Then, press the [MENU/SELECT] key to confirm.. When unpairing is successful, the screen displays CAM X is unpaired and returns to previous menu. If there is no paired baby unit, the screen displays No CAM is paired.. The LED light on the selected baby unit flashes slowly. Positioning the baby monitor NOTE This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. CAUTION Keep the baby unit out of the reach of the baby. Never place or mount the baby unit inside the baby’s crib or playpen. Place the baby unit at least 1 meter / 3 feet away from your baby. At least 1 meter (3 feet) Place parent unit at least 1 meter / 3 feet away from the baby unit. At least 1 meter (3 feet) 1. 2. 3. 4. 5. 6. 7. 1. 2. NOTE If you experience audio feedback on either the parent unit or baby unit, move the parent unit further away until there is no more audio feedback; or press -/VOL on the parent unit to lower the audio feedback sound. TIP For desktop usage and/or wall mounting the baby unit, you can refer to Quick Start Guide. Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. General product care To keep this product working well and looking good, follow these guidelines: Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). DO NOT expose it to direct sunlight or moisture. Avoid dropping the product or treating it roughly. Clean with a soft cloth. DO NOT immerse the baby unit in water and do not clean them under the tap. DO NOT use cleaning spray or liquid cleaners. Make sure the baby unit is dry before you connect them to the mains again. Important safety instructions When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Follow all warnings and instructions marked on the product. Adult setup is required. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. This product is not intended for use as a medical monitor. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. • • • • • • • 1. 2. 3. 4. 5. Use only the adapters included with this product. Incorrect adapter polari…

Text truncated - open the document above for the full version.

User’s manual VM344/VM344-2 Safe & Sound ® Pan & Tilt Full Color Video Monitor Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty! Visit www.vtechphones.com. Registration Register your product online for enhanced warranty support. Product news Learn about the latest VTech products. What’s in the boxInstall the battery You can power up the parent unit by connecting it to AC power or to the rechargeable battery provided. Even if the parent unit is connected to AC power, we recommend you also install the battery. This guarantees continual operation in case of a power outage. Install the battery as shown below. NOTES Make sure the label THIS SIDE UP is facing up while inserting the battery. NOTES The operating time for using the rechargeable battery is short. If you want to monitor your baby for a long time, we recommend you connect the parent unit to AC power. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. • • Connect and charge the battery NOTES Use only the battery supplied with this product. Use only the power adapters supplied with this product. Make sure the electrical outlets are not controlled by wall switches. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Connect the baby monitor • • • • • Charge the parent unit battery When you have connected the parent unit and installed its battery for the first time or after power outage, the parent unit powers on automatically. The battery icon indicates the battery status (see the following table). NOTES The parent unit battery is fully charged after 3 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery. Battery indicators Battery status Action The battery icon is off and displays. No battery is installed but operates using AC power, or the battery has been installed incorrectly. Install the parent unit battery. Charge without interruption (at least 30 minutes). The screen displays Battery low at Parent Unit and . The lightlight flashes. The battery has very little charge and may be used for only a short time. Charge without interruption (about 30 minutes). The battery icon becomes solid . The battery is fully charged. To keep the battery charged, connect it to AC power when not in use. • • • Before use You may test the baby monitor before initial use, and at regular times thereafter. To test your baby monitor: Place the parent unit and the baby unit in the same room to test the product. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit. Slide on the baby unit to turn it on. Upon initial use, the parent unit powers on automatically after connecting to AC power. The screen shows and Powering on.... NOTE If both units are not connected, the parent unit displays and then No link to CAM # (# represents the selected baby unit number) on the screen. The LINK light first flashes and then turns off. Move the parent unit closer to the baby unit. 1. 2. 3. Positioning the baby monitor NOTE This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. CAUTION Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen. Place the baby unit at least 1 meter / 3 feet away from your baby. Adjust the angle of the camera to aim at your baby. At least 1 meter (3 feet) Place parent unit at least 1 meter / 3 feet away from the baby unit. At least 1 meter (3 feet) NOTE If you experience audio feedback on either the parent unit or baby unit, move the parent unit further away until there is no more audio feedback. TIP If you cannot hear the sounds transmitted from the baby unit, you can choose a higher sound sensitivity level and increase the speaker volume of the parent unit. Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. 1. 2. Overview Baby unit overview a b c g h i j k d e l m f a b c g h i j k d e l m f a b c g h i j k d e l m f 1 Light sensor 2 Infrared LEDs 3 Camera 4 Microphone 5 -/VOL/+ Press to adjust the listening volume.• 6 Speaker 7 ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is pairing to the parent unit. • • 8 ON/OFF switch Slide to turn on or off the baby unit.• 9 Antenna 10 Temperature sensor 11 Power jack 12Threaded socket For wall mount installation use.• 13 PAIR Press and hold to pair to the parent unit when a desired baby unit slot is chosen at the parent unit. • Parent unit overview d e a b c 1LCD ON/OFF Press and hold to turn off the parent unit screen. VIEW Press to view the image of the next baby unit in SINGLE-CAM or PATROL mode. • • 2PATROL Press to turn on or off the PATROL mode. • 3SPLIT Press to turn on or off the SPLIT-VIEW mode. • 4 Speaker 5 Stand f g h i j k m n o p q r s l 6 Antenna 7 LED lights Indicate the different statuses of the parent unit. For details, refer to Parent unit lights. • 8 Microphone 9 Zoom While viewing image, press to zoom in or out. • 10 TALK While viewing image, press and hold to talk t…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Oct 28, 2015 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Oct 28, 2015 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification - Baby Unit FCC ID: EW780-0148-00 Request is hereby submitted by VTech Telecommunications Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Oct 28, 2015 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Oct 28, 2015 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification - Baby Unit FCC ID: EW780-0148-00 Request is hereby submitted by VTech Telecommunications Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800

INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-002 FCC ID: EW780-0148-00 IC: 1135B-80014800

VM344-X Engraving PU UNIT BU UNIT PU LABEL SIZE: 39.6 x 19.6 mm 50# UL Approved PET BU LABEL SIZE: 42.6 x 17.6 mm 50# UL Approved PET 40.0 20.0 43.0 18.0 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344-2 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 Model: VM344 BU S/N: XXXXXXXXXXX FCC ID: EW780-0148-00 IC: 1135B-80014800 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM314 S/N: XXXXXXXXXXX FC…

Text truncated - open the document above for the full version.