EW780-0148-012.4GHz Frequency Hopping Spread Spectrum Baby Monitor - Parent Unit

User’s manual VM344/VM344-2 Safe & Sound ® Pan & Tilt Full Color Video Monitor Congratulations on purchasing your new VTech product. Before using this product, please read Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. Register online to get an additional 3-month warranty! Visit www.vtechphones.com. Registration Register your product online for enhanced warranty support. Product news Learn about the latest VTech products. What’s in the boxInstall the battery You can power up the parent unit by connecting it to AC power or to the rechargeable battery provided. Even if the parent unit is connected to AC power, we recommend you also install the battery. This guarantees continual operation in case of a power outage. Install the battery as shown below. NOTES Make sure the label THIS SIDE UP is facing up while inserting the battery. NOTES The operating time for using the rechargeable battery is short. If you want to monitor your baby for a long time, we recommend you connect the parent unit to AC power. If the parent unit will not be used for a long time, disconnect and remove the battery to prevent possible leakage. • • Connect and charge the battery NOTES Use only the battery supplied with this product. Use only the power adapters supplied with this product. Make sure the electrical outlets are not controlled by wall switches. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if they are plugged into a ceiling, under-the-table or cabinet outlet. Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. Connect the baby monitor • • • • • Charge the parent unit battery When you have connected the parent unit and installed its battery for the first time or after power outage, the parent unit powers on automatically. The battery icon indicates the battery status (see the following table). NOTES The parent unit battery is fully charged after 3 hours of continuous charging. It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery. Battery indicators Battery status Action The battery icon is off and displays. No battery is installed but operates using AC power, or the battery has been installed incorrectly. Install the parent unit battery. Charge without interruption (at least 30 minutes). The screen displays Battery low at Parent Unit and . The lightlight flashes. The battery has very little charge and may be used for only a short time. Charge without interruption (about 30 minutes). The battery icon becomes solid . The battery is fully charged. To keep the battery charged, connect it to AC power when not in use. • • • Before use You may test the baby monitor before initial use, and at regular times thereafter. To test your baby monitor: Place the parent unit and the baby unit in the same room to test the product. Make sure the baby unit is at least 1 meter / 3 feet away from the parent unit. Slide on the baby unit to turn it on. Upon initial use, the parent unit powers on automatically after connecting to AC power. The screen shows and Powering on.... NOTE If both units are not connected, the parent unit displays and then No link to CAM # (# represents the selected baby unit number) on the screen. The LINK light first flashes and then turns off. Move the parent unit closer to the baby unit. 1. 2. 3. Positioning the baby monitor NOTE This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such. CAUTION Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen. Place the baby unit at least 1 meter / 3 feet away from your baby. Adjust the angle of the camera to aim at your baby. At least 1 meter (3 feet) Place parent unit at least 1 meter / 3 feet away from the baby unit. At least 1 meter (3 feet) NOTE If you experience audio feedback on either the parent unit or baby unit, move the parent unit further away until there is no more audio feedback. TIP If you cannot hear the sounds transmitted from the baby unit, you can choose a higher sound sensitivity level and increase the speaker volume of the parent unit. Operating range The operating range of the baby monitor is up to 300 meters (1,000 feet) outdoors or 50 meters (160 feet) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions. 1. 2. Overview Baby unit overview a b c g h i j k d e l m f a b c g h i j k d e l m f a b c g h i j k d e l m f 1 Light sensor 2 Infrared LEDs 3 Camera 4 Microphone 5 -/VOL/+ Press to adjust the listening volume.• 6 Speaker 7 ON/OFF LED light On when the baby unit is turned on and is paired to the parent unit. Flashes when the baby unit is pairing to the parent unit. • • 8 ON/OFF switch Slide to turn on or off the baby unit.• 9 Antenna 10 Temperature sensor 11 Power jack 12Threaded socket For wall mount installation use.• 13 PAIR Press and hold to pair to the parent unit when a desired baby unit slot is chosen at the parent unit. • Parent unit overview d e a b c 1LCD ON/OFF Press and hold to turn off the parent unit screen. VIEW Press to view the image of the next baby unit in SINGLE-CAM or PATROL mode. • • 2PATROL Press to turn on or off the PATROL mode. • 3SPLIT Press to turn on or off the SPLIT-VIEW mode. • 4 Speaker 5 Stand f g h i j k m n o p q r s l 6 Antenna 7 LED lights Indicate the different statuses of the parent unit. For details, refer to Parent unit lights. • 8 Microphone 9 Zoom While viewing image, press to zoom in or out. • 10 TALK While viewing image, press and hold to talk t…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Oct 28, 2015 To whom it may concern, Label Location Justification – Parent Unit FCC ID: EW780-0148-01 Request is hereby submitted by VTech Telecommunications Ltd. to request an alternative method of positively identifying the equipment, pursuant to 47 CFR § 2.925(f) of the FCC Rules. The FCC identifier for Parent unit will be placed in the battery compartment and the following requirements are confirmed to meet: a) The FCC identifier will visible at the time of purchase, by either of the following approaches: • Marketing the device without the battery installed, or • Providing instruction (stated on the box, user manual, or additional documentation) directing the user as to where to find the FCC label. b) The user accessible area will not require any special tools for access and the FCC label will not be placed on a removable part. The user manual has already included the FCC statements, pursuant to 47 CFR § 15.19(a)(3), 15.21 and 15.105(b). If you have questions or need further information, please contact the undersigned. Sincerely, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Oct 28, 2015 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Oct 28, 2015 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification – Parent Unit FCC ID: EW780-0148-01 Request is hereby submitted by VTech Telecommunications Ltd to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES External Photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801

VM344-X Engraving PU UNIT BU UNIT PU LABEL SIZE: 39.6 x 19.6 mm 50# UL Approved PET BU LABEL SIZE: 42.6 x 17.6 mm 50# UL Approved PET 40.0 20.0 43.0 18.0 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344-2 PU SN:XXXXXXXXXXX FCC ID: EW780-0148-01 IC: 1135B-80014801 Model: VM344 BU S/N: XXXXXXXXXXX FCC ID: EW780-0148-00 IC: 1135B-80014800 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM314 S/N: XXXXXXXXXXX FCC ID: EW780-0148-00 IC: 1135B-80014800 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344 BU S/N: XXXXXXXXXXX FCC ID: EW780-0148-00 IC: 1135B-80014800 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM344-2 BU S/N: XXXXXXXXXXX FCC ID: EW780-0148-00 IC: 1135B-80014800 VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA

INTERTEK TESTING SERVICES Internal photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES Internal photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES Internal photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES Internal photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 INTERTEK TESTING SERVICES Internal photos Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801

INTERTEK TESTING SERVICES FCC ID: RF exposure - 1 of 1 For Standalone SAR test exclusion consideration, when the corresponding SAR Exclusion Threshold requirement in KDB 447498 is satisfied, standalone SAR evaluation for general population exposure conditions, by measurement or numerical simulation is not required. Description the tested model: VM344-2 PU EUT Description : 2.4GHz FHSS Baby Monitor Model : VM344-2 PU Operating Configuration(s) : Held to head Operating mode (s) : Voice call Device Category : Portable Device Tx Frequency : 2406 – 2475 MHz Production tolerance : 14.5 dBm (Minimum) to 20 dBm (Maximum) Antenna gain : 2 dBi = 1.58 (num gain) Maximum source-based time- averaging duty factor : 8.9% = (465/5200 x100%) Minimum separation distance : 5 mm Applicable FCC KDB : FCC KDB 447498 D01 FCC KDB 865664 D02 From above data, the source-based time-averaging output power is as follow: The Maximum Conducted Power = 20 dBm = 100.0 mW The Maximum conducted Power source-based time-averaging output power = (100.0 * 0.089) mW = 8.9 mW In the frequency range of 100MHz to 6GHz and test separation distance ≤ 50mm, the SAR Exclusion Threshold will be determined as follow, The SAR exclusion threshold = () )(/0.3GHzFTD× = 9.53 mW where TD = 5 mm and F(GHz) = 2.48 GHz Conclusion Since the calculated conducted source-based time-averaged output power is 8.90 mW, which is less than the SAR Exclusion Threshold at 5mm test separation distance 9.53 mW for general population and uncontrolled exposure, standalone SAR evaluation for general population exposure conditions, by measurement or numerical simulation is not required.

- Intertek’s standard Terms and Conditions can be obtained at our website: http://www.intertek.com/terms/. - The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. - This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com TEST REPORT Report Number: 15100943HKG-003 Application for Original Grant of 47 CFR Part 15 Certification New Family of RSS-247 Issue 1 Equipment Certification 2.4GHz Frequency Hopping Spread Spectrum Baby Monitor - Parent Unit FCC ID: EW780-0148-01 IC: 1135B-80014801 Prepared and Checked by: Approved by: Signed On File Leung Chiu Kuen, Stanley Wong Kwok Yeung, Kenneth Engineer Lead Engineer November 30, 2015 INTERTEK TESTING SERVICES Test Report Number: 15100943HKG-003 Page 1 of 46 FCC ID: EW780-0148-01 IC: 1135B-80014801 GENERAL INFORMATION Applicant Name: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2014 Edition FCC ID: EW780-0148-01 FCC Model(s): VM344 PU, VM344-2 PU, VM344-3 PU, VM344-4 PU, VM3x4-ab PU IC Specification Standard: RSS-247 Issue 1, May 2015 RSS-Gen Issue 4, November 2014 IC: 1135B-80014801 IC Model(s): VM344 PU, VM344-2 PU Type of EUT: Spread Spectrum Transmitter Description of EUT: 2.4GHz Frequency Hopping Spread Spectrum Baby Monitor - Parent Unit Serial Number: N/A Sample Receipt Date: October 27, 2015 Date of Test: October 31 to November 04, 2015 Report Date: November 30, 2015] Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% INTERTEK TESTING SERVICES Test Report Number: 15100943HKG-003 Page 2 of 46 FCC ID: EW780-0148-01 IC: 1135B-80014801 Table of Contents 1.0 Test Results Summary & Statement of Compliance ............................................... 4 1.1 Summary of Test Results .......................................................................................... 4 1.2 Statement of Compliance .......................................................................................... 5 2.0 General Description ................................................................................................... 7 2.1 Product Description ................................................................................................... 7 2.2 Test Methodology ...................................................................................................... 7 2.3 Test Facility ............................................................................................................... 7 3.0 System Test Configuration ........................................................................................ 9 3.1 Justification ............................................................................................................... 9 3.2 EUT Exercising Software ........................................................................................ 10 3.3 Details of EUT and Description of Accessories ....................................................... 11 3.4 Measurement Uncertainty ....................................................................................... 11 4.0 Test Results .............................................................................................................. 13 4.1 Maximum Conducted Output Power at Antenna Terminals ..................................... 13 4.2 Maximum 20 dB RF Bandwidth ............................................................................... 16 4.3 Minimum Number of Hopping Frequencies ............................................................. 19 4.4 Minimum Hopping Channel Carrier Frequency Separation ..................................... 22 4.5 Average Channel Occupancy Time ......................................................................... 24 4.6 Out of Band Conducted Emissions .......................................................................... 27 4.7 Field Strength Calculation ....................................................................................... 32 4.8 Transmitter Radiated Emissions in Restricted Bands and Spurious Emissions ....... 33 4.8.1 Radiated Emission Configuration Photograph ...................................................... 34 4.8.2 Radiated Emission Data ....................................................................................... 34 4.8.3 Radiated Emission Test Setup ............................................................................. 35 4.8.4 Transmitter Duty Cycle Calculation ...................................................................... 40 4.9 AC Power Line Conducted Emission ....................................................................... 42 4.9.1 AC Power Line Conducted Emission Configuration Photograph .......................... 42 4.9.2 AC Power Line Conducted Emission Data ........................................................... 42 …

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 adiated Emission – Parent Unit: Transmission Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 Radiated Emission – Parent Unit: Speaker ON and Charging Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 AC Conducted Emission – Parent Unit: Talk and Charging Front View Side View 1 INTERTEK TESTING SERVICES The Worst Case Configuration Photographs Test Report Number: 15100943HKG-003 FCC ID: EW780-0148-01 IC: 1135B-80014801 AC Conducted Emission Side View 2