EW780-0826-00Cordless handset

SN5147 Amplified Corded/Cordless Answering System with Big Buttons and Display User guide Go to www.vtechphones.com (US) to register your product for enhanced warranty support and latest VTech product news. Go to phones.vtechcanada.com (Canada) for the latest VTech product news. (US) (CA) Scan the QR code for support information Congratulations on purchasing your new VTech product. Before using this telephone, please read Important safety instructions. This quick start guide provides you with basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the online user’s manual for a full set of installation and operation instructions at www.vtechphones.com. In Canada, please visit phones.vtechcanada.com. Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. T Compatible with Hearing Aid T-Coil TIA-1083 The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines. Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Use only with UL listed Bluetooth devices. 4. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 5. CAUTION: Do not install the telephone base at a height above 2 meters. 6. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, nor in a wet basement or shower. 7. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 8. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes. 9. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 10. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 11. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 12. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 13. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 14. Do not overload wall outlets and extension cords. 15. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled onto the product. • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. • If the product has been dropped and the telephone base and/or handset has been damaged. • If the product exhibits a distinct change in performance. 16. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 17. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 18. Only put the handset of your telephone next to your ear when it is in normal talk mode. 19. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 20. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 21. CAUTION: Use only the batteries indicated in this manual. There may be a risk of explosion if a wrong type of battery is used for the handset. Use only the sup- …

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: [email protected] Date: 2023-12-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: Our product Cordless handset, Model: SN5127, SN512x-ab, SN5107, SN5107-ab, SN5147, SN514x-ab, FCC ID: EW780-0826-00, For use in America, this product only supports BDR (GFSK), EDR (π/4-DQPSK, 8DPSK) and DECT. The other functions was disabled to use by manufacture in the software, the end user has no capability to activate it. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax:(852)2680 5252 E-mail: [email protected] ATTESTATION STATEMENT Date: 2023-12-08 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(5)(i), (ii) Filing FCC ID: EW780-0826-00 VTech Telecommunications Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. VTech Telecommunications Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Michael Tsui Approbation Supervisor

U.S. AGENT LETTER OF ATTESTATION Date: 2023-03-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing VTech Telecommunications Ltd certifies that, as of the date of the filing of the application, VTech Communications, Inc. is our designated U.S. agent for service of process for the FCC ID. VTech Telecommunications Ltd accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. VTech Communications, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the FCC ID. Designated U.S. Agent Information: Company Name: VTech Communications, Inc. Address: 9020 SW Washington Square Road, Tigard OR 97223 Agent FRN : 0033411265 Tel.: +1(503) 596-1212 Email: [email protected] Signed by: Chris Conrad Signature: Applicant Company Name: VTech Telecommunications Ltd Address: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Applicant FRN: 0015973951 Tel: (852)2680 5398 Email: [email protected] Signed by: Michael Tsui Signature:

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: [email protected] QA-FR-170-B FCC Authorization Date: 2023-12-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, VTech Telecommunications Ltd, the undersigned, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: [email protected] FCC Confidential Authorization Date: 2023-12-08 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-0826-00 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Oct. 23, 2023 To whom it may concern, FCC-Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify The only differences between these models are the follows for marketing purpose: Color Cosmetic details Trade name Model number Others, please specify The base , Package type, no. of Handset and Charger. Suffix ( x,a,b in SN512x-ab, SN514x-ab, SN5107-ab ) represents Color code Packing configuration Others, please specify x= any alphanumeric character is presenting different package type (material). a= any alphanumeric character or blank is presenting number of Handset and extra Charger. b= any alphanumeric character or blank is presenting different color of enclosure. ,but models with suffix ( x,a,b ) are identical in: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify For the product subject to authorization under FCC Declaration of Conformity: In addition, it is to confirm that all the below information 1) The U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual Are the same but different in the following model numbers only: Item # New Model Model Number Trade Name Remarks 1 YES SN5127 vtech 1 base + 1 handset 2 YES SN512x-ab vtech 1 base + a handset + (a-1) charger 3 YES SN5107 vtech 1 handset + 1 charger 4 YES SN5107-ab vtech a handset + a charger 5 YES SN5147 vtech 1 base with corded handset + 1 charger + 1 cordless handset 6 YES SN514x-ab vtech 1 base with corded handset + a charger + a cordless handset VTech Telecommunications Ltd The sample(s) being submitted to China Certification ICT Co., Ltd (Dongguan) for conformity assessment is SN5127 of the above list. All above models FCC ID: EW780-0826-00 Regards, Michael Tsui Approbation Supervisor

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 1 of 8 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 2 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 3 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 4 of 8 Charger China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 5 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 6 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 7 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-EXP Page 8 of 8

24.51 20.70 SN5107/SN5127/SN5147 HS Model: SN5107 SN:XXXXXXXXXXXX Model: SN5107 SN:XXXXXXXXXXXX Model: SN5127 SN:XXXXXXXXXXXX Model: SN5147 SN:XXXXXXXXXXXX SN LABEL 20X10mm LABEL 20X13.6mm CAUTION Do NOT use Alkaline / Manganese / Ni-Cd batteries. Use Only Supplied Batteries 92-034179-030-100 26X8mm HS LABEL: FCC ID: EW780-0826-00 HAC Reg. No.: US: EW7W4NAN80-082600 COMPLIES WITH 47 CFR PART 68 FCC ID: EW780-0826-00 HAC Reg. No.: US: EW7W4NAN80-082600 COMPLIES WITH 47 CFR PART 68

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 1 of 8 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 2 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 3 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 4 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 5 of 8 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 6 of 8 BT ANT China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 7 of 8 DECT ANT Charger China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-INP Page 8 of 8

SAR TEST REPORT Applicant: VTech Telecommunications Ltd Address: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong FCC ID: EW780-0826-00 Product Name: Cordless handset Model Number: SN5127 Multiple Models: SN512x-ab，SN5107，SN5107-ab，SN5147，SN514x-ab Standard(s): 47 CFR Part 2(2.1093) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230956632-SA Date Of Issue: 2023-12-20 Reviewed By: Karl Gong Title: SAR Engineer Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-SA Page 2 of 56 SAR TEST RESULTS SUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Head SAR Body SAR (Gap 0mm) DECT 0.04 0.11 1.6 EUT Received Date: 2023/09/11 Tested Date: 2023/10/12 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-SA Page 3 of 56 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-SA Page 4 of 56 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 7 1.2 TEST SPECIFICATION, METHODS AND PROCEDURES ........................................................................ 8 1.3 SAR LIMITS .......................................................................................................................................... 9 1.4 FACILITIES ...................................................................................................................................... 10 2. SAR MEASUREMENT SYSTEM .......................................................................................... 11 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 18 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 18 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 19 4.1 LIQUID VERIFICATION ...................................................................................................................... 19 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 20 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 21 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 22 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 22 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 23 5.3 EAR/TILT POSITION ........................................................................................................................... 23 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 24 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 24 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 25 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 26 6.1 TEST PROCEDURE .............................................................................................................................. 26 6.2 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 26 6.3 TEST RESULTS: .................................................................................................................................. 27 7. Standalone SAR test exclusion considerations ....................................................................... 29 7.1 ANTENNAS LOCATION: ...................................................................................................................... 29 7.2 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ................................................................. 29 8. SAR MEASUREMENT RESULTS ........................................................................................ 30 8.1 SAR TEST DATA .......................................................................…

Text truncated - open the document above for the full version.

Model: SN5147_BT AntennaAntenna description:This Monopole is optimized and used in the Handset unit. This antenna is directly soldered to the BT ANT2 RF output in the main PCB. Specification: Model Number Description SN5147_BT 2.4GHZ Monopole Antenna Operation Frequency Range 2402 to 2480 MHZ Maximum Gain 0 dBi Type Monopole Antenna Operation bandwidth 70MHz Nominal Impedance ~50 ohms Model number ANT-SN5147-P-BT-0 Manufacturer Vtech Telecommunications Ltd Manufacturer address 23/F, Tai Ping Industrial Centre, Blk1, 57 Ting Kok Road, Tai Po, Hong Kong *NOTE: Frequency and Orientation with maximum Antenna Gain. V H Frequency MHZ 0.00 -1.25 2441.000 Antenna Gain (dBi) SN5147_BT ANT Radiation Pattern_XY Plane -45-40-35-30-25-20-15-10 -5 05 V H SN5147 Handset BT Antenna Dimensions in mm Model: SN5147_ANT1Antenna description:This Monopole is optimized and used in the Handset unit. This antenna is directly soldered to the ANT1 RF output in the main PCB. Specification: Model Number Description SN5147_ANT1 1.9GHZ Monopole Antenna Operation Frequency Range 1921.536 to 1928.448 MHZ Maximum Gain 0 dBi Type Monopole Antenna Operation bandwidth 70MHz Nominal Impedance ~50 ohms Model number ANT-SN5147-P-DE-1 Manufacturer Vtech Telecommunications Ltd Manufacturer address 23/F, Tai Ping Industrial Centre, Blk1, 57 Ting Kok Road, Tai Po, Hong Kong *NOTE: Frequency and Orientation with maximum Antenna Gain.Frequency: 1924.992 MHZ Vertical Horizontal 0.00 -1.63 Antenna Gain (dBi) SN5147_ANT1 Radiation Pattern_XY Plane -40-35-30-25-20-15-10 -5 05 VerticalHorizontal SN5147 Handset ANT1 Dimensions in mm

TEST REPORT Applicant: VTech Telecommunications Ltd Address: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong FCC ID: EW780-0826-00 Product Name: Cordless handset Standard(s): FCC PART 15D ANSI C63.17-2013 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230956632-00B Date Of Issue: 2024/03/20 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-00B Page 2 of 50 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-00B Page 3 of 50 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 CONDUCTED EMISSIONS .................................................................................................................... 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup.................................................................................................................................................... 10 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 10 3.1.4 Test Procedure ............................................................................................................................................. 11 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 11 3.2 EMISSION BANDWIDTH: .................................................................................................................... 12 3.2.1 Applicable Standard ..................................................................................................................................... 12 3.2.2 EUT Setup.................................................................................................................................................... 12 3.2.3 Test Procedure ............................................................................................................................................. 12 3.3 PEAK TRANSMIT POWER: ................................................................................................................. 13 3.3.1 Applicable Standard ..................................................................................................................................... 13 3.3.2 EUT Setup.................................................................................................................................................... 13 3.3.3 Test Procedure ............................................................................................................................................. 13 3.4 POWER SPECTRAL DENSITY: ............................................................................................................ 14 3.4.1 Applicable Standard .......................................................................................................................…

Text truncated - open the document above for the full version.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230956632-00B-TSP TEST SETUP PHOTOGRAPHS Conducted Emissions Front View Conducted Emissions Side View