EW780-1847-00Home and Cellphone Calls

&ODULW\3URGXFWV//& 3UHVHUYDWLRQ'ULYHȪ&KDWWDQRRJD71 7HOȪ)D[ :HEVLWHZZZFODULW\SURGXFWVFRP k&ODULW\3URGXFWV//&&ODULW\&ODULW\3URIHVVLRQDO;/&;/&+6;/&JR DQGWKHDPSOLILHGILJXUHDUHWUDGHPDUNVRUUHJLVWHUHGWUDGHPDUNVRI&ODULW\ 3URGXFWV//&2WKHUWUDGHPDUNVDQGWUDGHQDPHVDUHWKRVHRIWKHLUUHVSHFWLYH RZQHUV 6 6SHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH 5HY$   3ULQWHGLQ&KLQD E N G L I S H User Guide Home and cellphone calls MAKE CALLS WITH AND WITHOUT A LANDLINE PAIR UP TO TWO (2) :,5(/(66(1$%/(' DEVICES 50 DB OF AMPLIFICATION AND FOUR (4) TONE SETTINGS EXPANDABLE UP TO THREE (3) EXTRA HANDSETS (XLCHS®) 1 ;/& 2 5 6 8 10 11 14 1 16 17 18 18 19 19 20   3 3 3 Important Safety Instructions Contents P& arts Checklist Installation Wall 0RXQWLQJ<RXU;/& Base - Quick Reference Guide Handset - Quick Reference Guide Battery ,QIRUPDWLRQ :LUHOHVV(QDEOHG)XQFWLRQ Placing & Answering Calls 9ROXPHDQG7RQH$GMXVWPHQWV &DOOHU,')XQFWLRQ 6ORZButton Phonebook Screen Details Telephone Menu Handset Registration Troubleshooting Technical Information Regulatory Compliance Warranty Information TABLE OF CONTENTS 2 ;/& SAVE THESE INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1.Read and understand all instructions. 2.Follow all warnings and instructions marked on the telephone. 3.Avoid contact with liquids. Do not locate base unit or handset near water, for example, near a bathtub, wash basin, sink or laundry tub, in a wet basement or near a swimming pool. 4.Avoid using a telephone (other than a cordless type) during a storm. There may be a remote risk of electrical shock from lightning. 5.Do not use the telephone to report a gas leak in the vicinity of the leak. 6.Unplug this telephone from the wall outlets before cleaning. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 7.Place this telephone on a stable surface. Serious damage and/or injury may result if the telephone falls. 8.Do not cover the slots and openings on this telephone. This telephone should never be placed near or over a radiator or heat register. This telephone should not be placed in a built-in installation unless proper ventilation is provided. 9.Operate this telephone using the electrical voltage as stated on the base unit or the owner’s manual. If you are not sure of the voltage in your home, consult your dealer or local power company. 10. Do not allow anything to rest on the power cord or locate this product in an area where the power cord is likely to be damaged by furniture or foot traffic. 11. Do not overload wall outlets or extension cords as this can increase the risk of fire or electrical shock. 12. Never push any objects through the slots in the telephone. They can touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock. Never spill liquid of any kind on the telephone. 13. To reduce the risk of electrical shock, do not take this phone apart. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 14. Unplug this product from the wall outlet and refer servicing to the manufacturer under the following conditions: when the power supply cord or plug is frayed or damaged; if liquid has been spilled into the IMPORTANT SAFETY INSTRUCTIONS 3 ;/& SAVE THESE INSTRUCTIONS product; if the telephone has been exposed to rain or water; if the telephone has been dropped or the case has been damaged; if the telephone exhibits a distinct change in performance; if the telephone does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment may require extensive work by a qualified technician to restore the telephone to normal operation if the telephone does not operate normally by following the operating instructions. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company. 16. Do not attempt to open the AC adapter. There are potentially dangerous voltages inside, and there are no serviceable parts. Discontinue use of product and contact Clarity if the product overheats, has a damaged cord or plug, if the product has been dropped or damaged or if the product has come into contact with liquids. Use only the AC adapter provided with this product or a replacement AC adapter provided by Clarity. This phone amplifies sound to loud volumes. To prevent hearing damage, all users of the phone should be informed of the high volume capability of the phone and children should only use the phone when supervised by an adult. Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your telephone with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. If you experience hearing discomfort, you should have your hearing checked by a doctor. To protect your hearing, you should: $ Set the volume control in a low position and gradually increase the volume as needed. Before pressing the BOOST button, reduce the volume to the lowest level. Use the phone on the lowest volume setting as possible. % Limit the amount of time you use the telephone at high volume levels. If you experience a skin irritation after using this product, discontinue use and contact Clarity.  $GD…

Text truncated - open the document above for the full version.

Appendix B1 Letter of Agency for FCC Certification Jan. 04, 2020 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Limited do hereby authorize Intertek Testing Services (Mr. Terry Chan/ Kenneth Wong/ Ms. Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Jan. 04, 2020 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-1847-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES External Photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES External Photos FCC ID: EW780-1847-00 IC: 1135B-80184701

INTERTEK TESTING SERVICES External Photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES External Photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES External Photos FCC ID: EW780-1847-00 IC: 1135B-80184701

XLC8HS LABEL ARTWORK Size= 24L X 20W MM,R=0.5 MMHS LBL50# white matte UL approved PET Size= 24L X 20W MM,R=0.5 MMHS LBL50# white matte UL approved PET BS UL LBL50# white matte UL approved PETSize= 46L X 24W MM,R=0.5 MM Model:FCC ID: IC: CAUTION: Use Only Supplied Battery Model:XLC8 HS XLC8 FCC ID: EW780-1847-00 IC: 1135B-80184701 CAUTION: Use Only Supplied Battery XLC8 LABEL ARTWORK Model:FCC ID: IC: CAUTION: Use Only Supplied BatteryModel: XLC8HS XLC8HSFCC ID: EW780-1847-00 IC: 1135B-80184701 CAUTION: Use Only Supplied Battery CH LBL50# white matte UL approved PETSize= 46L X 24W MM BS SN LBLSize=50x14mm XXXXX000101 CH SN LBLSize=50x14mm 89465000101 89465000101 89234000101 Model:FCC ID: IC: CAUTION: Use Only Supplied Battery Model:XLC8 HS XLC8 FCC ID: EW780-1847-00 IC: 1135B-80184701 CAUTION: Use Only Supplied Battery Model:FCC ID: IC: CAUTION: Use Only Supplied Battery Model: XLC8HS XLC8HS FCC ID: EW780-1847-00 IC: 1135B-80184701 CAUTION: Use Only Supplied Battery Size= 35L X 24W MM,R=0.5 MMHS LBL50# white matte UL approved PET BS UL LBL50# white matte UL approved PETSize= 46L X 24W MM,R=0.5 MM Model:FCC ID: IC: CAUTION: Use Only Supplied Battery Model:XLCgo HSXLCgoFCC ID: EW780-1889-00 IC: 1135B-80188900 CAUTION: Use Only Supplied Battery XLCgo LABEL ARTWORK Model: XLCgo Model: FCC ID: IC: CAUTION: Use Only Supplied Battery Model:XLCgo HS XLCgo FCC ID: EW780-1889-00 IC: 1135B-80188900 CAUTION: Use Only Supplied Battery Model:FCC ID: IC: CAUTION: Use Only Supplied Battery Mode XLC8-GO HS1 XLC8-GO FCC ID: EW780-1847-00 IC: 1135B-80184701 CAUTION: Use Only Supplied Battery Model:FCC ID: IC: CAUTION: Use Only Supplied BatteryModel:XLC8-GO HS2XLC8-GOFCC ID: EW780-1889-00 IC: 1135B-80188900 CAUTION: Use Only Supplied Battery 11A Model: XLC8 FCC Reg. No.:US:EW7W401A80-184700 IC:1135B-80184700 FCC ID:EW780-1847-00 Model: XLC8HS 11A Model: XLC8-GO FCC Reg. No.:US:EW7W401A80-184700 IC:1135B-80184700 FCC ID:EW780-1847-00 (Updated on Feb 19,2020) Model: XLCgo Model: XLC8HS 11A Model: XLC8 FCC Reg. No.:US:EW7W401A80-184700 IC:1135B-80184700 FCC ID:EW780-1847-00

INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-1847-00 IC: 1135B-80184701 INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-1847-00 IC: 1135B-80184701

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 38 SPECIFIC ABSORPTION RATE (SAR) EVALUATION REPORT For Home and Cellphone Calls - Handset unit Model Number: XLC8, XLC8 HS, XLC8HS, XLC8-GO, XLC8-GO HS1 Brand Name: vtech FCC ID: EW780-1847-00 Prepared for VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. PREPARED AND CHECKED BY: APPROVED BY: Signed On File Siu Yiu Nam, Edwin Senior Lead Engineer Date: February 22, 2020 Chan Chi Hung, Terry Manager Date: February 22, 2020 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19090030HKG-001.doc Page 2 of 38 TABLE OF CONTENTS 1 Test Result Summary .............................................................................................................................. 3 2 General Information ............................................................................................................................... 4 3 SAR Measurement System Description ................................................................................................. 7 4 Tissue Verificaiton ................................................................................................................................ 15 5 SAR Measurement System Verification ............................................................................................... 18 6 SAR Evaluation ...................................................................................................................................... 20 7 Test Equipment List .............................................................................................................................. 31 8 Measurement Uncertainty ................................................................................................................... 32 9 E-Field Probe and Dipole Antenna Calibration .................................................................................... 32 APPENDIX A – System Check Data ........................................................................................................... 33 APPENDIX B – SAR Evaluation Data ......................................................................................................... 35 APPENDIX C – E-Field Probe and Dipole Antenna Calibration ................................................................. 37 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19090030HKG-001.doc Page 3 of 38 1. TEST RESULT SUMMARY The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Band Operating Mode TX Frequency (MHz) Highest Reported SAR 1 g Head 1g Body-Worn 1.9GHz DECT Voice 1921.536 – 1928.448 0.035 W/kg 0.006 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. Applicant: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Model: XLC8, XLC8 HS, XLC8HS, XLC8-GO, XLC8-GO HS1 Brand Name: vtech Serial Number: N/A FCC ID: EW780-1847-00 Test Device: Production Unit Exposure Category: General Population/Uncontrolled Exposure Date of Test: December 20-23, 2019 Place of Testing: Intertek Testing Services Hong Kong Unit 3, G/F, World-Wide Industrial Centre, 43-47 Shan Mei Street, Fo Tan, Sha Tin. Environmental Conditions: Temperature: +18 to 25°C Humidity 25 to 75% Test Specification: ANSI/IEEE C95.1 IEEE Std 1528: 2013 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D01 v01r04 FCC KDB Publication 865664 D02 v01r02 FCC KDB Publication 648474 D04 v01r03 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19090030HKG-001.doc Page 4 of 38 2. GENERAL INFORMATION 2.1. Description of Equipment under test (EUT) *Note: 1. DECT has a TDD/TDMA frame structure with a complete frame of 10ms duration with 24 time slots. And under these 24 time slots, the first 12 slots are allocated for the transmission from base station to handsets, and the other 12 slots are for the transmission from handsets to base station. During a call, the handset of this product will use one of 24 time slots to transmit under worst case, which gives a duty cycle of 1/24 ( = 4.2%). Manufacturer: VTech (Dongguan) Telecommunications Limited. Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. Device dimension (L x W) : 188 (mm) x 57 (mm) Device thickness: 40 (mm) Antenna Gain: 0 dBi Operating Configuration(s) / mode: Held to head (Voice call) Body-worn (Voice call) Tx Frequency (MHz): 1921.536MHz to 1928.448MHz Duty…

Text truncated - open the document above for the full version.

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 51 TEST REPORT Report Number: 19090026HKG-002 Application For Original Grant of 47 CFR Part 15 Certification New Family of RSS-213 Issue 3 Equipment Certification Unlicensed Personal Communication Service Devices/ 2 GHz License-exempt Personal Communications Service Devices (Handset) FCC ID: EW780-1847-00 IC: 1135B-80184701 Prepared and Checked by: Approved by: Signed On File Leung Chiu Kuen, Stanley Engineer Tang Kwan Mo, Jess Lead Engineer Date: January 08, 2020 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19090026HKG-002 Page 2 of 51 GENERAL INFORMATION Grantee: VTech Telecommunications Ltd. Grantee Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2018 Edition FCC ID: EW780-1847-00 FCC Model(s): XLC8, XLC8 HS, XLC8HS, XLC8-GO, XLC8-GO HS1 IC Specification Standard: RSS-213 Issue 3, March 2015 RSS-Gen Issue 5, April 2018 IC: 1135B-80184701 HVIN: XLC8 HS, XLC8HS, XLC8-GO HS1 PMN: XLC8 HS, XLC8HS, XLC8-GO HS1 Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: Home and Cellphone Calls Serial Number: N/A Sample Receipt Date: September 02, 2019 Date of Test: September 05 - November 15, 2019 Report Date: January 08, 2020 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-213 Issue 3 Certification. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 19090026HKG-002 Page 3 of 51 TABLE OF CONTENTS 1.0 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE ............................................ 5 1.1 Summary of Test Results ................................................................................................ 5 1.2 Statement of Compliance .............................................................................................. 6 2.0 GENERAL DESCRIPTION ................................................................................................ 7 2.1 Product Description......................................................................................................... 7 2.2 Technical Description ...................................................................................................... 7 2.3 Test Methodology ........................................................................................................... 7 2.4 Test Facility ..................................................................................................................... 7 3.0 SYSTEM TEST CONFIGURATION .................................................................................... 8 3.1 Justification ..................................................................................................................... 8 3.2 Radiated Emission Test Setup ......................................................................................... 9 3.3 AC Line Conducted Emission Test Setup ........................................................................ 10 3.4 Conducted Emission Test Configuration ........................................................................ 11 3.5 Conducted Monitoring and Operational Test Configuration ......................................... 11 3.6 EUT Exercising Software ................................................................................................ 11 3.7 Details of EUT and Description of Accessories ............................................................... 12 3.8 Measurement Uncertainty ............................................................................................ 12 4.0 MEASUREMENT RESULTS ........................................................................................... 13 4.1 Antenna Requirement ................................................................................................... 13 4.2 Digital Modulation Techniques...................................................................................... 13 4.3 Emission Bandwidth ...................................................................................................... 14 4.4 Directional Gain of the Antenna .................................................................................... 16 4.5 Peak Transmit Power .................................................................................................... 17 4.6 Power Spectral Density ................................................................................................. 19 4.7 Automatic Discontinuation of Transmission .......................................................…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd 31 January , 2020 To whom it may concern, Declarations FCC ID: EW780-1847-00 IC: 1135B-80184701 I, the undersigned, hereby declare that 1. The device does not use the provisions of 47CFR 15.323 (c) (6), random waiting mechanism is not used in this system. 2. The provisions of 47CFR 15.323 (c) (10) and 47CFR 15.323 (c) (11) are not used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. 3. Only the handset will act as the initiating device, which will initiate the establishment of the duplex connection. 4. The device complies with the provisions of 47CFR 15.319(f). The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude transmission of control and signaling information or use of repetitive codes used by certain digital technologies to complete frame or burst intervals. The following table explains the reaction of device in case of either absence of information to transmit or operational failure after a connection of its companion device is established. Circumstances Reaction of Handset Unit 1 Switch-off companion device NA 2 On hook by companion device NA 3 Switch-off device NA 4 On hook on device side C 5 Remove power from device C 6 Remove power from companion device A A – Connection is terminated and, transmission ceases. B – Connection is terminated but device transmits control or signaling information. C – Connection is terminated but companion device transmits control or signaling information. NA – Not applicable represents the device does not contain a hook switch or a power off switch. 5. M L of handset declared by manufacturer are 30dBm. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-1847-00 IC: 1135B-80184701 Radiated Emission Front View Rear View

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-1847-00 IC: 1135B-80184701 Figure 1 – Right Cheek Figure 2 – Right Tilt INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-1847-00 IC: 1135B-80184701 Figure 3 – Left Cheek Figure 4 – Left Tilt INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-1847-00 IC: 1135B-80184701 Back surface with 0mm Separation