EW780-1957-01APan & Tilt Video Monitor

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. Congratulations on purchasing your new VTech product. Before using this HD video monitor, please read Important safety instructions . For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, visit www.vtechcanada.com . Technical specifications Android TM and Google Play TM are trademarks of Google Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countri es and is used under license. UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1CONFORMS TO VM901 VM901-2 Wi-Fi 1080p Pan & Tilt Video Monitor What does HD Video Monitor do? VTech Wi-Fi HD Video Monitor allows you to stay close to your baby when you are on the move or away. This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and audio through the HD baby unit and 5-inch color screen parent unit. It allows you to maintain a constant connection to your baby. You can also monitor from your smartphone and mobile tablet.VTech Wi-Fi HD Video Monitor uses MyVTech Baby 1080p app to let you instantly see and hear what’s happening with your baby from anywhere in the world. The app can be downloaded from the App Store or the Google Play TM Store, directly from your smartphone or mobile tablet. Specifications are subject to change without notice. © 2020 VTech Communications, Inc. All rights reserved. 09/20. VM901-X_QSG_V5. Frequency Baby unit: 2412 - 2462 MHz Channels 11 LCD 5’’ Color LCD (IPS 480x272 pixels) Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirement 1. Parent unit power adapter: Output: 5V DC 1A 2. Parent unit: 3.8V Lithium-ion Polymer battery Baby unit power adapter:Output: 5V DC 1A Quick start guide VM901 VM901-2 For more support information: S m Charge the battery before use The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can cordlessly run for a short time only. • Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon becomes solid . • It takes longer to charge when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging. • The standby time varies depending on your actual use. After the parent unit is fully charged, press POWER until the welcoming screen appears. The battery icon indicates the battery status (see the following table). Battery indicators Battery status Action The screen displays and . The light flashes. The battery has very little charge and may be used for only a short time. Charge without interruption (about 30 minutes). The battery icon becomes solid . The battery is fully charged. To keep the battery charged, connect it to AC power when not in use. Overview What’s in the box Connect, charge and power on the baby monitor Protect your privacy and online security How the system works VTech cares about your privacy and peace of mind. T hat’s why we’ve put together a list of industry-recommended best practices to help keep yo ur wireless connection private and your devices protected when online. We recommend yo u carefully review and consider complying with the following tips. Ensure your wireless connection is secure. • Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES” setting in your router’s wireless security menu. Change default settings. • Change your wireless router’s default wireless network name (SSID) to something unique.• Change default passwords to unique, strong passwords. A strong password: - Is at least 10 characters long.- Is complex.- Does not contain dictionary words or personal information.- Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. • Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. • If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. • UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network. For more information on wireless connections and protecting your data, please review the following resources from industry experts:1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips – www.fcc.gov/consumers/guides/how-protect-yourself-online . 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet – www.us-cert.gov/ncas/tips/ST15-003 . 3. Federal Trade Commission: Using IP Cameras Safely – https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely . 4. Wi-Fi Alliance: Discover Wi-Fi Security – http://www.wi-fi.org/discover-wi-fi/security . Parent unit icons For mobile access:MyVTech Baby 1080p mobile app Network Wi-Fi Wi-Fi router 2.4GHz 802.11 b/g/n Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p uploadbandwidth per baby unit Requirements Connect and charge the parent unit Install the parent unit battery The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can cordlessly run for a short time only.• Use only the battery supplied with this product.• If the parent unit will not be used for a l…

Text truncated - open the document above for the full version.

VM901 VM901-2 Important safety instructions The applied nameplate is located at the bottom of the baby unit’s base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 2 meters. 4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC® seal. 7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Output: 5V DC 1A. VTech Telecommunications Ltd. Model : VT05EUS05100 Rechargeable battery information: Lithium-ion Polymer 2100mAh 3.8V TMB - BP1803/I9300 8. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the- table or cabinet outlet. 9. For pluggable equipment, the socket-outlet (power adapter) shall be installed near the equipment and shall be easily accessible. 10. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 11. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 13. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 14. The equipment is to be supplied from an identified USB port complying with the requirements of Limited Power Source. 15. Do not overload wall outlets or use an extension cord. 16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20. You should test the sound reception every time you turn on the units or move one of the components. 21. Periodically examine all components for damage. 22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time. 23. Children should be supervised to ensure that they do not play with the product. 24. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children. 25. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONS Cautions • Use and store the product at a temperature between 32 o F and 104 o F. • Burn hazard, fire hazard, explosion hazard associated with mishandling of the battery. • Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. • Warning—Strangulation Hazard— Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove this tag. • Never place the baby unit(s) inside the baby’s crib or playpen. Never cover the baby unit(s) or parent unit with anything such as a towel or a blanket. • Other electronic products may cause interference with your baby unit. Try installing your baby unit as far away from these electronic devices as…

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VTech Telecommunications Ltd Address 23/F Tai Ping Ind Center Block 1, 57 Ting Kok Rd, Tai Po NT, Hong Kong Grantee Code EW7 FCC ID 80-1957-01A Authorized Contact Name Mr. Michael Tsui Contact Email [email protected] Contact Phone 852-26805398 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Jan. 19, 2021 Print Name: Michael Tsui Title: Approbation Supervisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: VTech Telecommunications Ltd 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT Hong Kong Regarding: Confidentiality Request regarding application for FCC ID: EW780-1957-01A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Michael Tsui Title: Approbation Supervisor Signature: On behalf of Company: VTech Telecommunications Ltd Telephone: 852-26805398 E-mail: [email protected]

VTech Telecommunications Ltd Jan. 19, 2021 To whom it may concern, Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows: Electronics/electrical designs, including software & firmware Construction design/Physical design/Enclosure PCB layout (Others, please specify) The only differences between these models are the follows for marketing purpose: Color Cosmetic details Trade name Model Number (Others, please specify) Suffix (“a, b”) represents Color code Packing configuration Others, please specify) a= any alphanumeric character or blank is presenting number of baby unit. b = any alphanumeric character or blank is presenting color option For the product subject to authorization under FCC Declaration of Conformity: In addition, it is to confirm that all the below information 1) the U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual are the same but different in the following model numbers only: Item No. New model Model Number Trade Name Remarks 1 YES VM901 PU vtech 1 parent unit 2 YES VM901-2 PU vtech 1 parent unit 3 YES VM901-ab PU vtech 1 parent unit The sample being submitted to SGS for conformity assessment is VM901-ab PU, (test model) of the above list. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Date: Jan. 19, 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: EW780-1957-01A To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with VTech Telecommunications Ltd. This authorization is valid until further written notice from the applicant. Name (Printed):Michael Tsui Name (Printed):Michael Tsui Signature: On behalf of Company: VTech Telecommunications Ltd. Telephone: 852-2680-5398

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/T erms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Appendix A Photographs of EUT Constructional Details for HKEM2101000035AT Appendix A: External Photo of HKEM2101000035AT

Remark: compliance statement was listed in manual due to surface and interface limitation reason. PU WM901 Engraving label PU LABEL SIZE: 58.5X40mm 75# UL Approved PET SN:XXXXXXXXXXX Model: VM901 PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01A IC: 1135B-80195701A HVIN: 35-201617PU Step 1 Step 2 T H IS SI D E U P THIS SIDE UP A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-844-848-8324 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901-1W PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01A IC: 1135B-80195701A HVIN: 35-201617PU Step 1 Step 2 T H IS SI D E U P THIS SIDE UP A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-844-848-8324 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901-2 PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01A IC: 1135B-80195701A HVIN: 35-201617PU Step 1 Step 2 T H IS SI D E U P THIS SIDE UP A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-844-848-8324 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901 PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01A IC: 1135B-80195701A HVIN: 35-201617PU Step 1 Step 2 T H IS SI D E U P THIS SIDE UP A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-844-848-8324 www.vtechphones.com

Appendix B: Internal Photo of HKEM2101000035AT

Report No.: HKEM210100003502 Page: 1 of 70 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2101000035AT Applicant: VTECH TELECOMMUNICATIONS LTD Address of Applicant: 23/F.,BLOCK 1, TAI PING INDUSTRIAL CENTRE,NO. 57 TING KOK ROAD,TAI PO,N.T.,Hong Kong Equipment Under Test (EUT): EUT Name: Pan & Tilt Video Monitor Model No.: US version: VM901 PU, VM901-2 PU, VM901-ab PU Canada version: VM901-1 PU, VM901-1W PU, VM901-ab PU Additional Model: Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. FCC ID: EW780-1957-01A IC: 1135B-80195701A HVIN: 35-201617PU Standard(s) : CFR 47 FCC Part 15 Subpart C, 2020 RSS-247 Issue 2: May 2017 RSS-Gen: Issue 5 Amdt 2019 Date of Receipt: 2021-01-19 Date of Test: 2021-01-19 to 2021-01-25 Date of Issue: 2021-01-26 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: HKEM210100003502 Page: 2 of 70 Revision Record Version Chapter Date Modifier Remark 01 2021-01-26 Original Authorized for issue by: Leo Xu /Project Engineer Date: 2021-01-26 Law Man Kit /Reviewer Date: 2021-01-26 Report No.: HKEM210100003502 Page: 3 of 70 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Disturbance at AC Power Line(150kHz- 30MHz) CFR 47 FCCPart 15, Subpart C 15.207 ANSI C63.10: 2013 Section 6.2 47 CFR FCC Part 15, Subpart C 15.207 Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.2.3 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.209 & 15.247(d) Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.209 & 15.247(d) Pass Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement RSS-Gen Issue 5, Amdt 2019 N/A RSS-Gen Section 6.8 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) RSS-Gen Issue 5: Amdt 2019 ANSI C63.10 (2013) Section 6.2 RSS-Gen Section 8.8 Pass 99% Bandwidth RSS-Gen Issue 5: Amdt 2019 ANSI C63.10 Section 6.9.3 RSS-Gen Section 6.7 Pass Minimum 6dB Bandwidth RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 11.8.1 RSS-247 Section 5.2(a) Pass Conducted Peak Output Power RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 11.9.1 RSS-247 Section 5.4(d) Pass Report No.: HKEM210100003502 Page: 4 of 70 Radio Spectrum Matter Part Item Standard Method Requirement Result Power Spectrum Density RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 11.10.2 RSS-247 Clause 5.2(b) Pass Conducted Band Edges Measurement RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 11.12 RSS-247 Section 5.5 Pass Spurious Emissions RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 11.11 RSS-247 Section 5.5 Pass Radiated Emissions which fall in the restricted bands RSS-Gen Issue 5: Amdt 2019 ANSI C63.10 (2013) Section 6.4&6.5&6.6 RSS-247 Section Section 3.3 & RSS-Gen Section 8.10 Pass Frequency stability RSS-247 Issue 2, February 2017 RSS-Gen Section 6.11 RSS-Gen Section 8.11 Pass Note: Frequency stability requested in RSS GEN Section 8.1.1 has been complied since the result of band edge can demonstrate. Declaration of EUT Family Grouping: Item no: US version: VM901 PU, VM901-2 PU, VM901-ab PU Canada version: VM901-1 PU, VM901-1W PU, VM901-ab PU a=any alphanumeric character or blank is presenting number of baby unit. b= any alphanumeric character or blank is presenting color option According to the confirmation from the applicant, the above models are identical in all electrical aspects in relating to the circuit design, PCB layout, electrical components used, internal wiring and functions. The differences are only the model/item No for different country…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZR/2021/1002601 Page : 1 of 35 FCC SAR TEST REPORT Application No: ZR/2021/10026 Applicant: VTech Telecommunications Ltd. Manufacturer: VTech Telecommunications Ltd. Factory: VTech (Dongguan) Telecommunications Limited. Product Name: 2.4G WIFI Baby Monitor Model No.(EUT): VM901 PU, VM901-2 PU, VM901-ab PU Trade Mark: VTech FCC ID: EW780-1957-01A Standards: FCC 47CFR §2.1093 Date of Receipt: 2021-01-19 Date of Test: 2021-02-17 to 2021-02-17 Date of Issue: 2021-02-20 Test conclusion: PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Authorized Signature: Derek Yang Wireless Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZR/2021/1002601 Page : 2 of 35 REVISION HISTORY Report Number Revision Description Issue Date ZR/2021/1002601 01 Original 2021-02-20 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZR/2021/1002601 Page : 3 of 35 TEST SUMMARY Frequency Band Maximum Reported SAR(W/kg) Body WI-FI (2.4GHz) 0.51 SAR Limited(W/kg) 1.6 Approved & Released by Simon Ling SAR Manager Tested by Jackson Li SAR Engineer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZR/2021/1002601 Page : 4 of 35 CONTENTS 1 GENERAL INFORMATION ................…

Text truncated - open the document above for the full version.