EW780-1957-01DPan & Tilt Video Monitor

Overview How the system works Direct mode The parent unit and the baby unit of your video monitor connect to each others in Direct mode by default, which allows you to stream live video right out of the box. Direct mode connection lets you stream live video from parent unit only. • You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to improve the signal strength. You can also set up Router mode to connect via your home Wi-Fi network to improve the connection between your parent unit and baby unit. Router mode You can continue using your video monitor with Direct mode connection, or you can set up your monitor in Router mode connection. Router mode uses your home Wi-Fi network to connect your video monitor. It supports streaming live video through parent unit and smartphone app. We recommend that you set up your monitor in Router mode to enjoy streaming live video via your parent unit with better connection. If you want to stream live video remotely with your mobile device, download and install the MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video monitor system. It serves as a communicating channel between your baby unit and mobile device, allowing you to monitor and/or control your baby unit wherever you are. For detail, see Download app for mobile access section in this quick start guide. • Your parent unit detects the connection signal strength. If you have connected your video monitor with your home Wi-Fi network, your parent unit automatically switches to direct or router mode - the one that has stronger signal strength. • When both parent unit and app are viewing the camera simultaneously, the video quality will be optimised to deliver the best possible viewing result. Baby unit overviewParent unit overview 1 LED light • On when the parent unit is connected to AC power, or the battery is charging. • Flashes when the parent unit battery is low and needs charging. • Off when the parent unit is disconnected from AC power. 2LINK LED light • On when the parent unit is linked to the baby unit. • Flashes when the link to the baby unit is lost. 3 LED light • On when the parent unit speaker volume is set to off. • On when the parent unit is talking to the baby unit. 4TALK LED light • On when the parent unit is talking to the baby unit. 5LCD display 6Microphone 7LCD ON/OFF 8POWER 9 Lullaby • Press to enter the lullaby menu. 10TALK • Press and hold to talk to the baby unit. • While in a submenu, press to exit. 11Arrow keys , , or • Press to move the selection box leftward, upward, rightward or downward. • While viewing image from the baby unit, press and hold to pan the baby unit leftward, upward, rightward or downward. • While viewing zoomed image, press and hold to move the zoomed image leftward, upward, rightward or downward. 12MENU/SELECT • Press to enter the menu. • While in a menu, press to choose an item, or save a setting. 13 Zoom in 14 Zoom out 15- VOL/ VOL + 16Power jack 17Antenna 18Speaker 19Battery compartment cover 20Stand 1Microphone 2Camera lens 3Light sensor 4LED indicators • Flash orange and green alternately when the baby unit is in pairing mode. • Orange is steady on when the baby unit is not connecting to the Internet and is idle. • Green is steady on when the baby unit is connecting to the Internet and is idle. • Flash orange slowly when the baby unit is not connecting to the Internet and is streaming with the parent unit. • Flash green slowly when the baby unit is connecting to the Internet and streaming with the parent unit or mobile app. • Flash orange and green quickly and alternately when the baby unit is updating its firmware. 5Infrared LEDs Allow you to see clearly in a dark surrounding. 6 ON/OFF switch 7Antenna Connect to router with Wi-Fi. 8Speaker 9Temperature sensor 10Power jack 11Threaded socket 12Pair/reset button • Press and hold for three seconds to enter pairing mode. 20 11 12 13 14 15 10 8 9 18 19 7 6 2 3 4 5 1 17 16 Mobile access Enhanced local access 6 3 ē 1 6 12 11 10 2 3 5 7 8 9 4 Local access 6 3 o F The applied nameplate is located at the bottom of the baby unit’s base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 2 metres. 4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. 5. This product is not intended for use as a medical monitor . 6. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the instructions. 8. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Parent Unit Output: 5V DC 2A VTech Telecommunications Ltd. Model: VT07EUS05200, 9. Baby Unit Output: 5V DC 1A VT…

Text truncated - open the document above for the full version.

What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)? During the limited warranty period, VTech’s authorized service representative will repair or replace at VTech’s option, without charge, a Materially Defective Product. If we repair the Product, we may use new or refurbished replacement parts. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Repair or replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the repaired or replacement Products to you in working condition. You should expect the repair or replacement to take approximately 30 days. How long is the limited warranty period? The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase. If VTech repairs or replaces a Materially Defective Product under the terms of this limited warranty, this limited warranty also applies to the repaired or replacement Product for a period of either (a) 90 days from the date the repaired or replacement Product is shipped to you or (b) the time remaining on the original one-year warranty; whichever is longer. What is not covered by this limited warranty? This limited warranty does not cover: 1. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 on the following part); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit. How do you get warranty service? To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1-844-848-8324 (1-844-84-VTECH). In Canada, go to www.vtechcanada.com or call 1-888-211-2005.NOTE: Before calling for service, please review the user’s manual - a check of the Product’s controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return repaired or replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit. If the Product failure is not covered by this limited warranty, or proof of purchase does not meet the terms of this limited warranty, VTech will notify you and will request that you authorize the cost of repair prior to any further repair activity. You must pay for the cost of repair and return shipping costs for the repair of Products that are not covered by this limited warranty. What must you return with the Product to get warranty service? 1. Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and 2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number. Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, …

Text truncated - open the document above for the full version.

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VTech Telecommunications Ltd Address 23/F Tai Ping Ind Center Block 1, 57 Ting Kok Rd, Tai Po NT, Hong Kong Grantee Code EW7 FCC ID 80-1957-01D Authorized Contact Name Mr. Michael Tsui Contact Email [email protected] Contact Phone 852-26805398 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Nov. 17, 2022 Print Name: Michael Tsui Title: Approbation Supervisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: VTech Telecommunications Ltd 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT Hong Kong Regarding: Confidentiality Request regarding application for FCC ID: EW780-1957-01D LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Michael Tsui Title: Approbation Supervisor Signature: On behalf of Company: VTech Telecommunications Ltd Telephone: 852-26805398 E-mail: [email protected]

VTech Telecommunications Ltd Date: 2022-0 6-3 0 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: EW780-1957-01D To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with VTech Telecommunications Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Michael Tsui Title: Approbation Supervisor Signature: On behalf of Company: VTech Telecommunications Ltd. Telephone: 852 2680 5398

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Appendix A Photographs of EUT Constructional Details for HKEM2209000917AT Appendix A: External Photo of HKEM2209000917AT

74x50mm 46mm 28mm 30mm 20mm 25.5mm MANUFACTURED IN CHINA www.vtechphones.comVTech Customer Service1-800-595-9511 FCC ID: EW780-1957-00C IC: 1135B-80195700D HVIN: 35-400344BUC A/V I.C.T.E. PU BU WM901HD Engraving label BU LBL SIZE: 46 X 25.5 mm 50# UL Approved PET BU LABEL S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF Model: VM901HD BU 46mm 17.5mm 12mm 24.5mm 25.5mm MANUFACTURED IN CHINA www.vtechphones.comVTech Customer Service1-800-595-9511 FCC ID: EW780-1957-00C IC: 1135B-80195700D HVIN: 35-400344BUC A/V I.C.T.E. MANUFACTURED IN CHINA www.vtechphones.comVTech Customer Service1-800-595-9511 FCC ID: EW780-1957-00C IC: 35-400344BUC HVIN: 1135B-80195700D A/V I.C.T.E. S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF Model: VM901HD BU S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF Model: VM901-2HD BU SN:XXXXXXXXXXX Model: VM901HD WIFI MAC: XXXXXXXXXXX WIFI MAC: XXXXXXXXXXX SN:XXXXXXXXXXX Model: VM901HD BU WIFI MAC: XXXXXXXXXXX PU SN LBL GB SN LBL BU SN LBL PU LBL 30X25 mm 50# PET FCC ID: EW780-1957-01D IC: 1135B-80195701D HVIN: 35-201964PUA A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901HD PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01D IC: 1135B-80195701D HVIN: 35-201964PUA A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901-2HD PU WIFI MAC: XXXXXXXXXXX A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com SN:XXXXXXXXXXX IC: 1135B-80195701D HVIN: 35-201964PUA FCC ID: EW780-1957-01D Model: VM901HD PU WIFI MAC: XXXXXXXXXXX FCC ID: EW780-1957-01D IC: 1135B-80195701D HVIN: 35-201964PUA A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901HD PU WIFI MAC: XXXXXXXXXXX BU LBL S/N: XXXXXXXXXXXXXXXXXXXX WIFI MAC : AABBCCDDEEFF Model: VM901-0HD BU 74x75mm 46mm 28mm 30mm 20mm MANUFACTURED IN CHINA www.vtechphones.comVTech Customer Service1-800-595-9511 FCC ID: EW780-1957-00C IC: 1135B-80195700D HVIN: 35-400344BUC A/V I.C.T.E. SN:XXXXXXXXXXX Model: VM901-2HD WIFI MAC: XXXXXXXXXXX WIFI MAC: XXXXXXXXXXX SN:XXXXXXXXXXX Model: VM901-2HD BU WIFI MAC: XXXXXXXXXXX PU SN LBL GB SN LBL BU SN LBL FCC ID: EW780-1957-01D IC: 1135B-80195701D HVIN: 35-201964PUA A/V I.C.T.E. MANUFACTURED IN CHINA VTech Customer Service 1-800-595-9511 www.vtechphones.com SN:XXXXXXXXXXX Model: VM901-2HD PU WIFI MAC: XXXXXXXXXXX BU LBL MANUFACTURED IN CHINA www.vtechphones.comVTech Customer Service1-800-595-9511 FCC ID: EW780-1957-00C IC: 1135B-80195700D HVIN: 35-400344BUC A/V I.C.T.E. SN:XXXXXXXXXXX Model: VM901-2HD BU WIFI MAC: XXXXXXXXXXX BU LBL 20mm BU SN LBL Remark: The compliance statement is placed on the manual due to the lack of display surface.

Appendix B: Internal Photo of HKEM2209000917AT

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2210000390E5 Page: 1 of 28 RF Exposure report The following samples were submitted and identified on behalf of the client as: Product Name Pan & Tilt Video Monitor Brand Name Vtech Model No. VM901HD PU, VM901-2HD PU Applicant VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong Standards IEEE/ANSI C95.1-1992, IEEE 1528-2013 RSS102 Issue 5, IEC/IEEE 62209-1528:2020, FCC 47CFR §2.1093 FCC ID EW780-1957-01D IC 1135B-80195701D HVIN 35-201964PUA Date of EUT Receipt Oct. 05, 2022 Date of Test(s) Oct. 21, 2022 Date of Issue Dec. 13, 2022 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Ltd. Central RF Lab or testing done by SGS Taiwan Ltd. Central RF Lab in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Ltd. Central RF Lab in writing. This test report is within the scope of TAF certification, except for the standard FCC 47CFR §2.1093. Signed on behalf of SGS Clerk / Kimmy Chiou PM / Tom Chiang Approved By / John Yeh Date: Dec. 13, 2022 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2210000390E5 Page: 2 of 28 Revision History Report Number Revision Description Issue Date Revised By Remark TESA2210000390E5 00 Initial creation of document Dec. 13, 2022 Kimmy Chiou Note: 1. The mark " * " is the revised version of the report due to comments submitted by the certification. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their r…

Text truncated - open the document above for the full version.

Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No: TESA2210000390E5 Rev: 01 Page : 1 of 14 Appendix B - DAE & Probe Calibration Certificate Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are reta…

Text truncated - open the document above for the full version.