EW780-1960-01DVideo Baby Monitor

Specifications are subject to change without notice. © 2023 VTech Communications, Inc. All rights reserved. 04/23. VM3254-X_QSG_US_V2. VM3254 VM3254-2 Video Baby Monitor Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. 1 Connect the baby monitor 2 Power on or off the baby monitor What’s in the box 4 Status check Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on. 3 Positioning the baby monitor Str angu lat io n Haz ard Ke ep thi s cord out of rea ch of children. The co r d ne eds to be at leas t t hree f ee t away fr o m the c hild at all times. Do n ot use wi th an extension cord . Do not re move this ta g. Élo ignez ce c ordon des enfants . Le cordon doit se tr ou ver à au moin s trois pieds d’ un en fant et c e, en t out temps. N’ ut il isez pas d e ra llo n ge. N e re t ir ez pas ce tte étiquette. M an ten ga este c able f u era de la a lcance de los ni ños. E ste c able debe es t ar po r lo men os tres pies fuera d e la a lca nce de l niño en todo momento . No lo u se con un a exten sión inalámbrica. N o quite es t a et ique ta. Risq ue d’ ét r ang lement Rie sgo de est ra ng ula c ión Stra ngu lat io n Hazard Kee p thi s cord out of reach of children. The co r d ne ed s to be at lea st t hree f ee t away fr o m the child at all time s. Do not use w ith an exten sio n c ord . Do not re move this ta g. Élo ignez ce co rd on des enfants. Le cord on doi t se tr ou ver à au moin s trois pieds d’ un en fant et ce , en to ut temps . N’ ut il ise z pas d e ra llo n ge. N e re t ir ez pas ce tte é tiq uet te. M an tenga este cable f u era de la alcanc e de los ni ños. Es te c able debe es tar po r lo menos tres pies fuera de la alc a nce del ni ño en todo mo mento . No lo u se con u n a extensión inalámbri ca. N o qui te es t a etiquet a. Risque d’ ét r angl ement Ri es go de est ra ng ula c ión Quick start guide Talk to your baby unit Press and hold TALK and speak to your parent unit. Your voice is transmitted to the baby unit. Release TALK when done talking and hear your baby again. Basic operation - Parent unit Overview - Parent unit Technical specifications The applied nameplate is located at the bottom of the baby unit’s base. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 2 meters. 4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal. 7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Parent unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Baby unit output: 6V DC 400mA. VTech Telecommunications Ltd. Model: VT05EUS06040 Rechargeable battery information: Zhuhai Great Power Energy Co., Ltd. Li-ion battery, 3.6V, 2600mAh, 9.36Wh; Model: ICR18650-2.6Ah-3.6V-1S1P 8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 10. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 11. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 13. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 14. Do not overload wall outlets or use an extension cord. 15. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 16. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or …

Text truncated - open the document above for the full version.

Form: RFT-AM ER-TCB-OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both VTech Communications, Inc. (“Agent”) and VTech Telecommunications Ltd. (“Applicant”) acknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Michael Tsui HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC & Intertek if there is any change in the status identified above. Applicant Company Name Contact Name Address Telephone No Email FCC ID Applicant FRN : VTech Telecommunications Ltd. : Michael Tsui : 23/F, Tai Ping Industrial Centre, Block 1, 57 Ting Kok Rd, Tai Po, Hong Kong : +852 2680 539 8 : [email protected] : EW780-1960-01D : 0015973951 Signature: ____________________________________ 3 March 2023 Date: ____________________________________ I Chris Conrad HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant and agree to immediately notify the FCC & Intertek if there is change in this representation. Agent Company Name : VTech Communications, Inc. Contact Name : Chris Conrad Address : 9020 SW Washington Square Road, Tigard OR 97223 Telephone No : +1(503) 596-1212 Email : [email protected] Agent FRN : 0033411265 Signature: ____________________________________ 3 March 2023 Date: ____________________________________

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: VTech Telecommunications Ltd. FCC ID: EW780-1960-01D To whom it may concern, VTech Telecommunications Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature of authorized Proprietor, Partner or Authorized Officer] Mr. Michael Tsui Approbation Supervisor VTech Telecommunications Ltd. 16 February 2024

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Sep. 27, 2017 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Terry Chan/ Koo Wai Ip/ Kenneth Wong/ Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Dec 29, 2023 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-1960-01D Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (External)

PU 50# UL Approved PET PU LABEL SIZE: 41.6X15.6 mm VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM3254 PU SN:XXXXXXXXXXX VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Model: VM3254 PU SN:XXXXXXXXXXX VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Model: VM3254-2 PU SN:XXXXXXXXXXX S/N: 11 digits, the serial no. is made in VTT barcode system. DiSa: Download from system UPC/DiSa: Font size : Arial ,5 pt. 1.字体：Arial 2.字符UPC：&Disa：需要加粗并加下划线（数字不用加粗） 3.条码尺寸：55~60mm*8mm 4.字符尺寸：55~60mm*2mm 5.字符与条码之前的间距为1mm 6.公差+/- 0.5mm UPC: 7-3507804826-4 DiSa: xxxxxxxxxxxxxxx DiSa Barcode S/N: XXXXXXXXXXX 55~60mm 1mm 8mm 55~60mm Disa Barcode notes: FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Size: 76x70 mm Material: 50# PET Part No.: VM3254-2 80-1961-00-11 92-038425-020-100 UPC: 7-3507804827-1 DiSa: xxxxxxxxxxxxxxx DiSa Barcode S/N: XXXXXXXXXXX Model: VM3254-2 PU SN:XXXXXXXXXXX DiSa: xxxxxxxxxxxxx FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB A/V I.C.T.E.A/V I.C.T.E. A/V I.C.T.E. A/V I.C.T.E. PU 50# UL Approved PET PU LABEL SIZE: 41.6X15.6 mm 4.86mm VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Model: VM819 PU SN:XXXXXXXXXXX A/V I.C.T.E. VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Model: VM819 PU SN:XXXXXXXXXXX A/V I.C.T.E. VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA FCC ID: EW780-1960-01D IC: 1135B-80196001D HVIN: 35-201916PUB Model: VM819-2 PU SN:XXXXXXXXXXX A/V I.C.T.E. A/V I.C.T.E.

INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-1960-01D IC: 1135B-80196001D Equipment Photographs (Internal)

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 39 SPECIFIC ABSORPTION RATE (SAR) EVALUATION REPORT Report No.: 23120043HKG-001 For Video Monitor - Parent Unit Model: VM3254 PU, VM3254-2 PU Brand Name: vtech FCC ID: EW780-1960-01D Prepared for VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. PREPARED AND CHECKED BY: APPROVED BY: Signed On File Ma King Hang Assistant Engineer Date: January 09, 2024 Tang Kwan Mo, Jess Lead Engineer Date: January 09, 2024 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120043HKG-001 Page 2 of 39 TABLE OF CONTENTS 1 Test Result Summary ............................................................................................... 3 2 General Information ................................................................................................ 4 3 SAR Measurement System Description .................................................................... 7 4 Tissue Verificaiton .................................................................................................. 15 5 SAR Measurement System Verification .................................................................. 18 6 SAR Evaluation ....................................................................................................... 20 7 Test Equipment List ................................................................................................ 33 8 Measurement Uncertainty ..................................................................................... 34 9 E-Field Probe and Dipole Antenna Calibration ........................................................ 35 APPENDIX A – System Check Data ............................................................................. 36 APPENDIX B – SAR Evaluation Data ............................................................................ 37 APPENDIX C – E-Field Probe and Dipole Antenna Calibration ..................................... 38 APPENDIX D – SAR SYSTEM VALIDATION ................................................................... 39 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120043HKG-001 Page 3 of 39 1. TEST RESULT SUMMARY Applicant: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Brand Name: vtech Description of EUT: Video Monitor - Parent Unit Model: VM3254 PU, VM3254-2 PU, VM819 PU, VM819-2 PU FCC ID: EW780-1960-01D Serial Number: N/A Test Device: Production Unit EUT Exercising Software: ComTestSerial Version 3.0.0.108 Exposure Category: Sample Receive Date: General Population/Uncontrolled Exposure December 07, 2023 Date of Test: December 08, 2023 to December 12, 2023 Test Location: Workshop No. 3, G/F., World-Wide Industrial Centre, 43-47 Shan Mei Street, Fo Tan, Sha Tin, N.T., Hong Kong SAR, China. Environmental Conditions: Temperature: +18 to 25°C Humidity 25 to 75% Test Specification: ANSI/IEEE C95.1 IEEE Std 1528: 2013 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D01 v01r04 FCC KDB Publication 865664 D02 v01r02 The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Band Operating Mode TX Frequency (MHz) Highest Reported SAR In-front-of mouth 2.4GHz FHSS Data 2405 – 2475 0.583 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120043HKG-001 Page 4 of 39 2. GENERAL INFORMATION 2.1. Description of Equipment Under Test (EUT) Manufacturer: VTech (Dongguan) Telecommunications Limited Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. Device Dimension (L x W): 120(mm) x 61(mm) Device Thickness: 33(mm) Antenna Gain: 0dBi Operating Configuration(s) / Mode: In-front-of mouth (Data) Body (Data) TX Frequency (MHz): 2405 - 2475MHz Duty Cycle*: 9.7% H/W Version: N/A S/W Version: N/A Battery Type: 3.6VDC 2600mAh Li‐ion rechargeable Battery Body-worn Accessories: N/A Remark: The models VM3254-2 PU, VM819 PU, VM819-2 PU are the same as the model VM3254 PU in hardware aspect. The difference in model number serves as marketing strategy as declared by client. The difference in model number represents different color as declared by client. Model Number Remarks VM3254 PU, VM3254-2 PU 1 Parent Unit VM819 PU, VM819-2 PU 1 Parent Unit The production units are required to conform to the initial sample as received when the units are placed on the market. *Note: 1. Worst case was selected to p…

Text truncated - open the document above for the full version.

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 29 Report No.: 23120041HKG-002 Application For Original Grant of 47 CFR Part 15 Certification New Family of RSS-247 Issue 3 Equipment Certification VTech Telecommunications Ltd. FCC ID: EW780-1960-01D IC: 1135B-80196001D Prepared and Checked by: Approved by: Signed on File Leung Chun Ning, Peter Assistant Engineer Wong Cheuk Ho, Herbert Assistant Supervisor Date: January 10, 2024 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120041HKG-002 Page 2 of 29 GENERAL INFORMATION Grantee: VTech Telecommunications Ltd. Grantee Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Manufacturer Name: VTech (Dongguan) Telecommunications Limited Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. FCC Specification Standard: FCC Part 15, October 1, 2022 Edition FCC ID: EW780-1960-01D FCC Model(s): VM3254 PU, VM3254-2 PU, VM819 PU, VM819-2 PU IC Specification Standard: RSS-247 Issue 3, February 2017 RSS-Gen Issue 5 Amendment 2, February 2021 IC: 1135B-80196001D HVIN: 35-201916PUB VTech Model(s): VM3254 PU, VM3254-2 PU, VM819 PU, VM819-2 PU PMN: VM3254 PU, VM3254-2 PU, VM819 PU, VM819-2 PU Type of EUT: Spread Spectrum Transmitter Description of EUT: Video Baby Monitor Sample Receipt Date: December 08, 2023 Date of Test: December 08, 2023 to December 28, 2023 Report Date: January 10, 2024 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-247 Issue 3 Certification. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120041HKG-002 Page 3 of 29 TABLE OF CONTENTS EXHIBIT 1 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE .................................. 4 1.1 Summary of Test Results ............................................................................................ 4 1.2 Statement of Compliance ........................................................................................... 4 EXHIBIT 2 GENERAL DESCRIPTION ....................................................................................... 5 2.1 Product Description .................................................................................................... 5 2.2 Test Methodology ....................................................................................................... 5 2.3 Test Facility ................................................................................................................. 5 2.4 Related Submittal Grants ............................................................................................ 6 EXHIBIT 3 SYSTEM TEST CONFIGURATION ........................................................................... 7 3.1 Justification ................................................................................................................. 7 3.2 EUT Exercising Software ............................................................................................. 8 3.3 Details of EUT and Description of Accessories ........................................................... 9 3.4 Measurement Uncertainty ......................................................................................... 9 EXHIBIT 4 TEST RESULTS .................................................................................................... 10 4.1 Maximum Conducted (Peak) Output Power at Antenna Terminals ........................ 10 4.2 Maximum 20dB RF Bandwidth ................................................................................. 11 4.3 Minimum Number of Hopping Frequencies ............................................................. 11 4.4 Minimum Hopping Channel Carrier Frequency Separation ..................................... 13 4.5 Average Channel Occupancy Time ........................................................................... 15 4.6 Out of Band Conducted Emissions............................................................................ 16 4.7 Field Strength Calculation ......................................................................................... 18 4.8 Transmitter Radiated Emission in Restricted Bands and Spurious Emission ........... 19 4.9 AC Power Line Conducted Emission ......................................................................... 25 EXHIBIT 5 EQUIPMENT LIST ............................................................................................... 28 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120041HKG-002 Page 4 of 29 EXHIBIT 1 TEST RESULTS SUMMARY & STATEMENT OF COMPL…

Text truncated - open the document above for the full version.

[VTECH] [2.4GHz Antenna] Model: VM3254 PU Antenna description: This antenna is optimized and used in the Parent Unit in the baby monitor models. This antenna is directly soldered to the RF output in the main PCB. Ordering information: Model Description VM3254 PU 2.4GHz Antenna Specification: Operation Frequency Range 2405-2475 MHz Maximum Gain 0 dBi Type FPC dipole Operation bandwidth 70MHz Nominal Impedance ~50 ohms Connectors - Dimensions 30x14mm Manufacturer Vtech Telecommunications Ltd Manufacturer address 23/F, Tai Ping Industrial Centre, Blk1, 57 Ting Kok Road, Tai Po, Hong Kong Model number ANT-VM3254-P-FH-1 [VTECH] [2.4GHz Antenna] Antenna pattern (2436MHz) (the frequency with maximum gain) XY plane (gain theta) Coordination: [VTECH] [2.4GHz Antenna] Physical Dimension: Figure 1 Physical dimension (mm)

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs FCC ID: EW780-1960-01D IC: 1135B-80196001D 23120043 VM3254 PU Figure 1 – Front 0mm separation Figure 2 – Front 0mm separation