EW780-2049-00DECT6.0 Cordless Phone

> 1 m (3 feet) > 1 m (3 feet) > 1 m (3 feet) TV Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. Quick start guide IS8151 IS8151-2 IS8151-3 IS8151-4 IS8151-43 IS8151-47 IS8151-5 Specifications are subject to change without notice. © 2021 VTech Communications, Inc. All rights reserved.07/21. IS8151-X_QSG_V6.0 Frequency control Crystal controlled PLL synthesizer Transmit frequency Handset: 1921.536MHz - 1928.448MHz Telephone base: 1921.536MHz - 1928.448MHz Channels5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirement Handset: 2.4 VDC, AAA×2, Ni-MH battery pack Telephone base: 6V DC @ 600mA Charger: 6V DC @ 400mA MemoryPhonebook: 200 memory locations; up to 30 digits and 15 characters Caller ID log: 50 memory locations; up to 24 digits and 15 characters Call block: 1000 entries DECT 6.0 Cordless telephone with BLUETOOTH® wireless technology Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. T Compatible with Hearing Ai d T-Coil TIA-1083 The ENERGY STAR ® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR ® label indicating it meets the latest energy efficiency guidelines. Technical specifications Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, nor in a wet basement or shower. 5. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 6. Avoid placing the telephone system in places with extreme temperature, direct sunlight, or other electrical devices. Protect your phone from moisture, dust, corrosive liquids and fumes. 7. Slots and openings in the back or bottom of the telephone base and handset are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. This product should not be placed in any area where proper ventilation is not provided. 8. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home or office, consult your dealer or local power company. 9. Do not allow anything to rest on the power cord. Do not install this product where the cord may be walked on. 10. Never push objects of any kind into this product through the slots in the telephone base or handset because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 12. Do not overload wall outlets and extension cords. 13. Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled onto the product. • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operation instructions. Improper adjustment of other controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation. • If the product has been dropped and the telephone base and/or handset has been damaged. • If the product exhibits a distinct change in performance. 14. Avoid using a telephone (other than cordless) during an electrical storm. There is a remote risk of electric shock from lightning. 15. Do not use the telephone to report a gas leak in the vicinity of the leak. Under certain circumstances, a spark may be created when the adapter is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an environment containing concentrations of flammable or flame-supporting gases, unless there is adequate ventilation. A spark in such an environment could create a fire or explosion. Such environments might include: medical use of oxygen without adequate ventilation; industrial gases (cleaning solvents; gasoline vapors; etc.); a leak of natural gas; etc. 16. Only put the handset of your telephone next to your ear when it is in normal talk mode. 17. The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 18. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessib…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Apr. 16, 2021 To whom it may concern, FCC-Multiple Models Confirmation Letter—base I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify BS LCD is different The only differences between these models are the follows for marketing purpose: Color Cosmetic details Trade name Model number Others, please specify Package type, no. of Handset and Charger. Suffix ( “X,Y, Z” in IS815Z-XY) represents Color code Packing configuration Others, please specify Z= any alphanumeric character is presenting different package type (material). X= any alphanumeric character or blank is presenting number of Handset and extra Charger. Y= any alphanumeric character or blank is presenting different color of enclosure. ,but models with suffix ( X,Y,Z ) are identical in: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify For the product subject to authorization under FCC Declaration of Conformity: In addition, it is to confirm that all the below information 1) The U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual Are the same but different in the following model numbers only: Item # New Model Model Number Trade Name Remarks 1 YES IS8151 vtech 1 base + 1 handset 2 YES IS8151-2 vtech 1 base + 2 handsets + 1 charger 3 YES IS8151-3 vtech 1 base + 3 handsets + 3 chargers 4 YES IS8151-4 vtech 1 base + 4 handsets + 3 chargers 5 YES IS8151-5 vtech 1 base + 5 handsets + 4 chargers 6 YES IS8152-5 vtech 1 base + 5 handsets + 4 chargers 7 YES IS815Z-XY vtech 1 base + X handsets + (X-1) chargers 8 YES IS8128 vtech 1 base + 1 handset 9 YES IS8128-2 vtech 1 base + 2 handsets + 1 charger 10 YES IS8128-3 vtech 1 base + 3 handsets + 3 chargers VTech Telecommunications Ltd 11 YES IS8128-4 vtech 1 base + 4 handsets + 3 chargers 12 YES IS8128-5 vtech 1 base + 5 handsets + 4 chargers 13 YES IS812Z-XY vtech 1 base + X handsets + (X-1) chargers The sample(s) being submitted to BACL(Shenzhen) for conformity assessment is IS8151-2 of the above list. Alll above model's FCC ID is EW780-2049-00 for Base Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: [email protected] FCC Confidential Authorization Date: 2021/06/28 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-2049-00 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 2 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 3 of 4 Adapter 1 (A318-059060W-US1) Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 4 of 4 Adapter 2 (VT05EUS06060)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 1 of 8 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 2 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 3 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 4 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 5 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 6 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 7 of 8 Bluetooth Antenna DECT Antenna 0 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1210210-04500E-RF Page 8 of 8 DECT Antenna 1

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 RSS-GEN ISSUE 5, FEBRUARY 2021 AMENDMENT 2 RSS-247, ISSUE 2, FEBRUARY 2017 TEST REPORT For FCC: VTech Telecommunications Ltd FCC: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong ISEDC: VTECH TELECOMMUNICATIONS LIMITED ISEDC: BL.1 23/F Tai Ping Industr Ctr. 57 Ting Kok Road Tai Po, NT Hongkong FCC ID: EW780-2049-00 IC: 1135B-80204900 Report Type: Original Report Product Type: DECT6.0 cordless phone Re port Number: SZ1210210-04500EB Re port Date: 2021-04-02 Reviewed B y: Jacob Kong RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210210-04500EB FCC Part 15.247 RSS-GEN ISSUE 5, February 2021 AMENDMENT 2, RSS-247, ISSUE 2, FEBRUARY 2017 Page 2 of 62 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC §15.247 (i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 RESULT ...................................................................................................................................................................... 10 RSS-102 § 4 –EXPOSURE LIMITS ........................................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 RESULT ...................................................................................................................................................................... 12 FCC §15.203 & RSS-GEN §6.8– ANTENNA REQUIREMENT ............................................................................ 14 APPLICABLE STANDARD ............................................................................................................................................ 14 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 14 FCC §15.207 (a) & RSS-GEN §8.8– AC LINE CONDUCTED EMISSIONS ........................................................ 15 APPLICABLE STANDARD ............................................................................................................................................ 15 EUT SETUP .............................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210210-04500E-RF EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1210210-04500E-RF Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)