EW780-2261-00DECT6.0 Cordless Phone

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. Quick start guide IS8251 IS8251-2 IS8251-3 IS8251-4 IS8251-5 What’s in the box Connect the charger Charge the battery Install the battery Specifications are subject to change without notice. © 2021 VTech Communications, Inc. All rights reserved. 02/21. IS8251-X_QSG_V1.0 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. T Compatible with Hearing Aid T-Coil TIA-1083 12 hrs Technical specifications Frequency controlCrystal controlled PLL synthesizer Transmit frequencyHandset: 1921.536-1928.448 MHz Telephone base: 1921.536-1928.448 MHz Channels5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirementHandset: 2.4V Ni-MH battery Telephone base: 6V DC @ 600mA Charger: 6V DC @ 400mA MemoryPhonebook: 1200 memory locations; up to 30 digits and 15 characters Caller ID log: 50 memory locations; up to 24 digits and 15 characters Call block: 1000 entries Connect the telephone base If you subscribe to digital subscriber line (DSL) high-speed Internet service through your telephone line, make sure you connect a DSL filter (not included) to the telephone wall jack. THIS SIDE UP / CE CÔTÉ VERS LE HAUT Batter y P ac k / Bloc-piles : BT 162342/ BT2623 4 2 (2.4V 300mAh Ni -MH) WA RNIN G / AV ERTI S SEMENT : DO NOT BUR N OR PUNCTU RE BA T TERIES . NE PA S IN CINÉRER OU PERC E R LES PILES. Made in China / F abriqué e n chine CR1939 Connect and install 1 Quick start guide Introducing Smart call blocker DECT 6.0 cordless telephone with BLUETOOTH® wireless technology Display Handset: The handset battery is low and needs charging. The handset battery is charging. The handset battery is fully charged. Handset or telephone base ringer is off. New voicemail received from your telephone service provider. NEW There are new caller ID log entries. ANS ON Answering system is on. Booster is turned on. 10/16 MSG # Handset displays the current message number being played and the total number of new/old messages recorded. MSG# 0 Telephone base message counter displays the total number of messages. ECO The ECO mode activates automatically to reduce power consumption when the handset is within range of the telephone base. To use a Bluetooth enabled cellular phone or headset with your telephone, you must first pair and connect your Bluetooth cellular phone or headset with the telephone base. Before you begin, make sure that you have cellular coverage and your Bluetooth enabled cell phone or headset is not connected to any other Bluetooth device. Add a Bluetooth cell phone Add a Bluetooth headset HANDSET 1 ECO 10:30 PM 10/16 MSG # NEW ANS ON The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by VTech Holdings Limited is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Telephone base: Setup 2 After you install your telephone or power returns following a power outage and battery depletion, the handset and telephone base will prompt you to set the date and time, and to configure the Smart call blocker* and answering system through voice guide. Date and time Follow the steps below to set the date and time. For example, if the date is 25 July, 2019, and the time is 12:05 PM: Voice guide for Smart call blocker / Answering system After setting the date and time, the telephone base will prompt if you want to set Smart call blocker, and the answering system. For more details, see Use voice guide to set Smart call blocker in the Introducing Smart call blocker leaflet and Use voice guide to set Answsering system in the online help topics. When the telephone base prompts you to set up the Smart call blocker via voice guide: When the handset and telephone base prompt you to set the date and time: Date: MM/DD/YY ECO Date: 07/25/19 ECO Press SELECT. 2 Time: 12:05 PM ECO Press SELECT. 4 Press YES on the telephone base to start voice guide setup. 2 Setup your answering system by inputting the designated numbers as instructed in the voice guide. “This voice guide will assist you with the basic setup of your answering system“ “Hello! This voice guide will assist you with the basic setup of Smart call blocker“ Press YES on the telephone base to start voice guide setup. 1 Setup your Smart call blocker by inputting the designated numbers as instructed in the voice guide. Make a home call Operate 3 End a home call Volume Handset: Telephone base: Handset: Telephone base: End a cell call Handset:Telephone base: Make a cell call Answer a home call Handset: - OR - Answer a cell call Handset: - OR - Handset: - OR - Telephone base: - OR - Handset: Telephone base: - OR - Date: 07/2?/-- ECO Enter the date. 1 Time: HH:MM - - ECO Enter the time. 3 Enter the phone number. 2 Enter the phone number. 2 Press 1 Press 1 Press Press Press Press Press Bluetooth When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. CAUTION: Do not install the telephone base at a height above 2 meters. 5. Do not use this product near water such as near a bath tub, wash bowl, kitchen sink, laundry tub or a swimming pool, or in a wet basement or shower. 6. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 7. Avoid placing the telephone system in pla…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Dec. 17, 2020 To whom it may concern, FCC-Multiple Models Confirmation Letter I, the undersigned, hereby confirm that the family models are listed in the following table. These models are identical as follows: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify The only differences between these models are the follows for marketing purpose: Color Cosmetic details Trade name Model number Others, please specify Suffix ( “X,Y, Z” in IS825Z-XY) represents Color code Packing configuration Others, please specify Z= any alphanumeric character is presenting different package type (material). X= any alphanumeric character or blank is presenting number of Handset and extra Charger. Y= any alphanumeric character or blank is presenting different color of enclosure. ,but models with suffix ( X,Y,Z ) are identical in: Electrical designs, including software & firmware PCB layout Construction design/Physical design/Enclosure Others, please specify Package type, no. of Handset and Charger. For the product subject to authorization under FCC Declaration of Conformity: In addition, it is to confirm that all the below information 1) The U.S. responsible party, 2) FCC label artworks and location, 3) FCC required statement in the user manual Are the same but different in the following model numbers only: Item # New Model Model Number Trade Name Remarks 1 YES IS8251 vtech 1 base + 1 handset 2 YES IS8251-2 vtech 1 base + 2 handsets + 1 charger 3 YES IS8251-3 vtech 1 base + 3 handsets + 2 chargers 4 YES IS8251-4 vtech 1 base + 4 handsets + 3 chargers 5 YES IS8251-5 vtech 1 base + 5 handsets + 4 chargers 6 YES IS8252-5 vtech 1 base + 5 handsets + 4 chargers 7 YES IS825Z-XY vtech 1 base + X handsets + (X-1) chargers VTech Telecommunications Ltd All above model's FCC ID is EW780-2261-00. The sample(s) being submitted to BACL for conformity assessment is IS8251 of the above list. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Add: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong Telephone: (852)2680 5398 Fax: (852)2680 5252 E-mail: [email protected] FCC Confidential Authorization Date: 2021/1/19 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: EW780-2261-00 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, VTech Telecommunications Ltd hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature Michael Tsui Approbation Supervisor

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 2 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 4 of 4 Adapter 1 (A318-059060W-US1) Adapter 2 (VT05EUS06060)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 1 of 8 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 2 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 3 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 4 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 5 of 8 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 6 of 8 Bluetooth Antenna Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 7 of 8 DECT Antenna 1 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: RSZ201207006-RF Page 8 of 8 DECT Antenna 0

Note: This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 RSS-GEN ISSUE 5, MARCH 2019 AMENDMENT 1 RSS-247, ISSUE 2, FEBRUARY 2017 TEST REPORT For FCC: VTech Telecommunications Ltd FCC: 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT, Hong Kong ISEDC: VTECH TELECOMMUNICATIONS LIMITED ISEDC: BL.1 23/F Tai Ping Industr Ctr. 57 Ting Kok Road Tai Po, NT Hongkong FCC ID: EW780-2261-00 IC: 1135B-80226100 Report Type: Original Report Product Type: DECT6.0 cordless phone Re port Number: RSZ201207006B Re port Date: 2021-01-19 Reviewed B y: Jimmy Xiao RF En gineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ201207006B FCC Part 15.247 RSS-GEN ISSUE 5, MARCH 2019 AMENDMENT 1, RSS-247, ISSUE 2, FEBRUARY 2017 Page 2 of 66 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC §15.247 (i) & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ........................................................ 10 APPLICABLE STANDARD ............................................................................................................................................ 10 RESULT ...................................................................................................................................................................... 10 RSS-102 § 4 –EXPOSURE LIMITS ........................................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 RESULT ...................................................................................................................................................................... 12 FCC §15.203 & RSS-GEN §6.8– ANTENNA REQUIREMENT ............................................................................ 14 APPLICABLE STANDARD ............................................................................................................................................ 14 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 14 FCC §15.207 (a) & RSS-GEN §8.8– AC LINE CONDUCTED EMISSIONS ........................................................ 15 APPLICABLE STANDARD ............................................................................................................................................ 15 EUT SETUP ......................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ201207006-RF EXHIBIT D - TEST SETUP PHOTOGRAPHS Adapter 1 (A318-059060W-US1) Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ201207006-RF Radiated Emissions View (Below 1 GHz) Adapter 2 (VT05EUS06060) Conducted Emissions - Front View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ201207006-RF Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ201207006-RF Radiated Emissions View (Above 1 GHz)