EW780-235700Full Color Pan and Tilt HD Video Monitor

For operations and guides to help you using your video monitor, and for latest information and supports, go and check the online help topics and online FAQs.Use your smartphone or mobile device to access our online help.• Go to https://help.vtechphones.com/vm818hd ; OR • Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to trigger the redirection of the online help. - If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear. You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada] for help. NOTESNOTE • The rechargeable battery in the parent unit is built-in.• Use only the power adapters supplied with this product.• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets. • Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold the weight of the parent unit and the baby unit, so do not con nect them to any ceiling, under-the-table, or cabinet outlets. O therwise, the adapters may not properly connect to the outlets. • Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children. • To maintain compliance with the FCC’s RF exposure guidelines, place the baby unit at least 20cm from nearby persons. Specifications are subject to change without notice. © 2021 VTech Communications, Inc. All rights reserved. 04/21. VM818-XHD_QSG_V1. VM818HD Full Color HD Video Monitor Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. 1 Connect the baby monitor 2 Power on or off the baby monitor What’s in the box 4 Status check Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on. The green LED light of the baby unit turns on. 3 Positioning the baby monitor Caution • The default volume of your parent unit is level 3, and the maximum volume is level 5. If you experience high-pitched screeching noise from your baby monitor while positioning: - Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR - Lower the volume of your parent unit. NONO Note • T o avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, cell phones and computers. Use the menuPress MENU to enter the menu, choose a menu item, or save a setting. You can use the parent unit for advanced settings or operations, such as to play or stop the baby unit lullaby, or to adjust the baby unit sound sensitivity.While in the menu:• Press , , or to scroll among the menu options . • Press SELECT to select an item, or to save a setting. • Press TALK to return to the live video. • Press to go to the Help & info page. Basic operation - Parent unit Overview - Parent unit Overview - Baby unit Transmit frequency Baby unit: 2406 - 2475 MHz Channels 24 LCD 5’’ Color LCD (IPS 1280x720 pixels) Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirements Parent unit: 3.8V 2100mAh Lithium-ion battery Baby unit and parent unit power adapters:Output: 5V DC @ 1A Technical specifications Credits:The Background Noise sound file was created by Caroline Ford, and is use d under the Creative Commons license. The Stream Noise sound file was created by Caroline Ford, and is use d under the Creative Commons license. The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license. The Heart Beat sound file was created by Zarabadeu, and is used un der the Creative Commons license. The applied nameplate is located at the bottom of the baby unit’s base.When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the baby unit at a height above 2 meters. 4. This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. 5. This product is not intended for use as a medica l monitor . 6. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 7. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or lo w extreme temperature and low air pressure at high altitude d uring use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the ba ttery can result in an explosion. Leaving the battery in an e xtremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RB RC seal. 8. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Parent unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Baby unit output: 5V DC 1A. VTech Telecommunications Ltd. Model: VT05EUS05100 Rechargeable battery information: Li-ion battery, 3.8V 2100mAh Zhongshan Tianmao Battery Co., Ltd. Model Number: BP1763 9. The power adapters are intended to be correctly oriented in a vertical or floor mount position.…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Date: Jan. 29, 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: EW780-235700 To whom it may concern: We, the undersigned, hereby authorize SGS Hong Kong Limited and YW Yung in SGS Hong Kong Limited to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with VTech Telecommunications Ltd. This authorization is valid until further written notice from the applicant. Name (Printed):Michael Tsui Name (Printed):Michael Tsui Signature: On behalf of Company: VTech Telecommunications Ltd. Telephone: 852-2680-5398

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name VTech Telecommunications Ltd Address 23/F Tai Ping Ind Center Block 1, 57 Ting Kok Rd, Tai Po NT, Hong Kong Grantee Code EW7 FCC ID EW780-235700 Authorized Contact Name Mr. Michael Tsui Contact Email [email protected] Contact Phone 852-26805398 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: Jan.26, 2021 Print Name: Michael Tsui Title: Approbation Supervisor *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

To: Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: VTech Telecommunications Ltd 23/F Tai Ping Ind Center Block 1 57 Ting Kok Rd Tai Po NT Hong Kong Regarding: Confidentiality Request regarding application for FCC ID: EW780-235700 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Michael Tsui Title: Approbation Supervisor Signature: On behalf of Company: VTech Telecommunications Ltd Telephone: 852-26805398 E-mail: [email protected]

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/T erms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Appendix A Photographs of EUT Constructional Details for HKEM2101000053AT Appendix A: External Photo of HKEM2101000053AT

42.00 25.00 Label 41.6x24.6mm compliance statement was listed in manual due to surface and interface limitation reason 8.03mm WIFI MAC: xxxxxxxxxxxxxx VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM818HD BU SN:XXXXXXXXXXX FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU A/V I.C.T.E. WIFI MAC: xxxxxxxxxxxxxx VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM818HD BU SN:XXXXXXXXXXX FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU A/V I.C.T.E. WIFI MAC: xxxxxxxxxxxxxx VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM818-2HD BU SN:XXXXXXXXXXX FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU A/V I.C.T.E. WIFI MAC: xxxxxxxxxxxxxx VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM818-1HD BU SN:XXXXXXXXXXX FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU A/V I.C.T.E. WIFI MAC: xxxxxxxxxxxxxx VTech Customer Service 1-800-595-9511 www.vtechphones.com MANUFACTURED IN CHINA Model: VM818-1WHD BU SN:XXXXXXXXXXX FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU A/V I.C.T.E.A/V I.C.T.E. VM818 BU label

Appendix B: Internal Photo of HKEM2101000053AT

Report No.: HKEM210100005303 Page: 1 of 11 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2101000053AT Applicant: VTECH TELECOMMUNICATIONS LTD Address of Applicant: 23/F., BLOCK 1, TAI PING INDUSTRIAL CENTRE, NO. 57 TING KOK ROAD, TAI PO, N.T., Hong Kong Equipment Under Test (EUT): EUT Name: Full Color Pan and Tilt HD Video Monitor Model No.: VM818HD BU, VM818-1HD BU, VM818-1WHD BU, VM818-2HD BU, VM818-abHD BU Additional Model: Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU Standard(s) : 47 CFR Part 1.1307; 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 RSS102 Issue 5 March 2015 Date of Receipt: 2021-01-12 Date of Test: 2021-01-13 to 2021-01-27 Date of Issue: 2021-02-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: HKEM210100005303 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2021-02-02 Original Authorized for issue by: Leo Xu /Project Engineer Date: 2021-02-02 Law Man Kit /Reviewer Date: 2021-02-02 Report No.: HKEM210100005303 Page: 3 of 11 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result RF Exposure 47 CFR Part 1.1307, 47 CFR Part 2.1093, KDB 447498 D01 KDB447498D01 KDB447498D01 PASS RF Exposure RSS102 Issue 5 RSS-102 Section 2.5.1 RSS102 Issue 5 PASS Declaration of EUT Family Grouping: Item no: VM818HD BU, VM818-1HD BU, VM818-1WHD BU, VM818-2HD BU, VM818-abHD BU a=any alphanumeric character or blank is presenting number of baby unit. b= any alphanumeric character or blank is presenting color option According to the confirmation from the applicant, the above models are identical in all electrical aspects in relating to the circuit design, PCB layout, electrical components used, internal wiring and functions. The differences are only the model/item No, color and decorations. Therefore, only the model VN818HD BU was tested in this report. Abbreviation: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. RF: In this whole report RF means Radiated Frequency. CH: In this whole report CH means channel. Volt: In this whole report Volt means Voltage. Temp: In this whole report Temp means Temperature. Humid: In this whole report Humid means humidity. Press: In this whole report Press means Pressure. N/A: In this whole report not application. Report No.: HKEM210100005303 Page: 4 of 11 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ................................................................................................................................. 3 3 CONTENTS ......................................................................................................................................... 4 4 GENERAL INFORMATION .................................................................................................................. 5 4.1 D ETAILS OF E.U.T. ......................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6 4.3 T EST LOCATION ............................................................................................................................. 7 4.4 T EST FACILITY ............................................................................................................................... 7 4.5 DEVIATION FROM STANDARDS ......................................................................................................... 7 4.6 A BNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7 5 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................. 8 5.1 RF EXPOSURE ............................................................................................................................... 8 5.1.1 Test Requirement: ................................................................................................................... 8 5.1.1 IC Radiofrequncy radiation ....................................................................................................... 9 5.1.2 EUT RF Exposure Evaluation ..................................................................................................10 6 PHOTOGRAPHS ..........................…

Text truncated - open the document above for the full version.

Report No.: HKEM210100005302 Page: 1 of 52 Law Man Kit EMC Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request and accessible at http://www.sgs.com/en/Terms-and-conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. T he document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. TEST REPORT Application No.: HKEM2101000053AT Applicant: VTECH TELECOMMUNICATIONS LTD Address of Applicant: 23/F., BLOCK 1, TAI PING INDUSTRIAL CENTRE, NO. 57 TING KOK ROAD, TAI PO, N.T., Hong Kong Equipment Under Test (EUT): EUT Name: Full Color Pan and Tilt HD Video Monitor Model No.: VM818HD BU, VM818-1HD BU, VM818-1WHD BU, VM818-2HD BU, VM818-abHD BU Additional Model: Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. FCC ID: EW780-235700 IC: 1135B-80235700 HVIN: 35-400345BU Standard(s) : 47 CFR Part 15 Subpart C, 2020 RSS-247 Issue 2, February 2017 RSS-Gen: Issue 5, Amdt 2019 Date of Receipt: 2021-01-12 Date of Test: 2021-01-13 to 2021-01-27 Date of Issue: 2021-02-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: HKEM210100005302 Page: 2 of 52 Revision Record Version Chapter Date Modifier Remark 01 2021-02-02 Original Authorized for issue by: Leo Xu /Project Engineer Date: 2021-02-02 Law Man Kit /Reviewer Date: 2021-02-02 Report No.: HKEM210100005302 Page: 3 of 52 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Other requirements Frequency Hopping Spread Spectrum System Hopping Sequence 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.5 47 CFR Part 15, Subpart C 15.247(b)(1) Pass 20dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.7 47 CFR Part 15, Subpart C 15.247(a)(1) Pass Carrier Frequencies Separation 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.2 47 CFR Part 15, Subpart C 15.247a(1) Pass Hopping Channel Number 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.3 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Dwell Time 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.4 47 CFR Part 15, Subpart C 15.247a(1)(iii) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.6 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 7.8.8 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement RSS-247 Issue 2, February 2017 N/A RSS-Gen Section 6.8 Pass Pseudorandom Frequency Hopping Sequence RSS-247 Issue 2, February 2017 N/A RSS-247 Section 5.1(a) Pass Report No.: HKEM210100005302 Page: 4 of 52 Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 6.2 RSS-Gen Section 8.8 Pass 99% Bandwidth RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 6.9.3 RSS-Gen Section 6.7 Pass Conducted Peak Output Power RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 7.8.5 RSS-247 Section 5.4(b) Pass 20dB Bandwidth RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 6.9.2 RSS-247 Section 5.1(a) Pass Carrier Frequencies Separation RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 7.8.2 RSS-247 Section 5.1(b) Pass Hopping Channel Number RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 7.8.3 RSS-247 Section 5.1(d) Pass Dwell Time RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 7.8.4 RSS-247 Section 5.1(d) Pass Conducted Band Edges Measurement RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section7.8.6 RSS-247 Section 5.5 Pass Conducted Spurious Emissions RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 7.8.8 RSS-247 Section 5.5 Pass Radiated Emissions which fall in the restricted bands RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 6.10.5 Section 3.3 & RSS-Gen Section 8.10 Pass Radiated Spurious Emissions RSS-247 Issue 2, February 2017 ANSI C63.10 (2013) Section 6.4&6.5&6.6 Section 3.3 & RSS-Gen Secti…

Text truncated - open the document above for the full version.

Appendix C: Setup Photo of HKEM2101000053AT Conducted Emissions at Mains Terminals Test Setup Radiated Emissions (30MHz-1GHz) Test Setup Radiated Emissions (Above 1GHz) Test Setup Conducted RF Test Setup