EW780-2529-01AVideo Baby Monitor

Go to www.vtechphones.com to register your product for enhanced warranty support and latest VTech product news. Congratulations on purchasing your new VTech product. Before using this baby monitor, please read the Important safety instructions. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com. In Canada, visit www.vtechcanada.com. FrequencyBaby unit: 2412 - 2462 MHz Channels11 LCD5’’ Color LCD (IPS 1280x720 pixels) Nominal effective rangeMaximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Power requirementBaby unit power adapter: Output: 5V DC, 1000mA. Parent unit power adapter: Output: 5V DC, 2A. Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery Specifications are subject to change without notice. © 2023 VTech Communications, Inc. All rights reserved. 09/23. RM5766-XHD_2Gen_QSG_V2 Technical specifications Android TM and Google Play TM are trademarks of Google Inc. App Store is a trademark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. UL STD. 62368-1 CERTIFIED TO CSA STD. C22.2 NO.62368-1 CONFORMS TO RM5766HD RM5766-2HD 5” Smart Wi-Fi 1080p Pan & Tilt Monitor What does HD Video Monitor do? Disclaimer and Limitation of Liability VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road - Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada Quick start guide RM5766HD RM5766-2HD For more support information S m VTech 5” Smart Wi-Fi 1080p Pan & Tilt Monitor allows you to stay close to your baby when you are on the move or away. This monitor is Wi-Fi enabled, using your home wireless network to stream live video and audio through the 1080p baby unit and 5-inch color screen parent unit. It allows you to maintain a constant connection to your baby. You can also monitor from your smartphone and mobile tablet. VTech 5” Smart Wi-Fi 1080p Pan & Tilt Monitor uses MyVTech Baby Plus app to let you instantly see and hear what’s happening with your baby from anywhere in the world. The app can be downloaded from the App Store or the Google Play TM Store. The full HD (1080p) resolution is visible in the app only. Product Recycling Recycle this product when you are done with it. For more information, scan the QR code or visit vtechphones.com/recycle. Overview What’s in the box Connect, charge and power on the baby monitor Protect your privacy and online security Your baby monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. How the system works VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips. Ensure your wireless connection is secure. • Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES” setting in your router’s wireless security menu. Change default settings. • Change your wireless router’s default wireless network name (SSID) to something unique. • Change default passwords to unique, strong passwords. A strong password: - Is at least 10 characters long. - Is complex. - Does not contain dictionary words or personal information. - Contains a mix of uppercase letters, lowercase letters, special characters and numbers. Keep your devices up to date. • Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates. • If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router. • UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network. For more information on wireless connections and protecting your data, please review the following resources from industry experts: 1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips – www.fcc.gov/consumers/guides/how-protect-yourself-online. 2. U.S. Department of Homeland Security: Before You Connect a New Computer to the Internet – www.us-cert.gov/ncas/tips/ST15-003. 3. Federal Trade Commission: Using IP Cameras Safely – https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely. 4. Wi-Fi Alliance: Discover Wi-Fi Security – http://www.wi-fi.org/discover-wi-fi/security. Parent unit icons For mobile access: MyVTech Baby Plus mobile app NetworkWi-Fi Wi-Fi router2.4GHz 802.11 b/g/n Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit Requirements Baby unit overview 1Light sensor 2Camera lens 3Infrared LEDs • Allow you to see clearly in a dark environment. 4Microphone 5Night Light 6 Night Light Control Key • Go to Night Light section to learn more. 7 LED indicator In direct signal connection: • Red is steadily on when the baby unit is connecting to the parent unit. • Red flashing slowly during video streaming In Wi-Fi signal connection: • Green is steadily on when the baby unit is connected to Wi-Fi. • Green flashes slowly during video streaming to Wi-Fi. 8ON/OFF switch • Power it on or off. 9Speaker 10Temperature sensor 11 Power jack 12Wall mount slots…

Text truncated - open the document above for the full version.

To keep this product working well and looking good, follow these guidelines: • Avoid placing it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose it to direct sunlight or moisture. • Avoid dropping the product or treating it roughly. • Clean with a soft damp cloth. • DO NOT immerse the parent unit and the baby unit in water and do not clean them under running water. • DO NOT use cleaning spray or liquid cleaners. • Make sure the parent unit and the baby unit are dry before you connect them to the mains again. When you are not going to use the video monitor for some time, store the parent unit, the baby unit and the adapters in a cool, dry place. Below are the questions most frequently asked about the video monitor. Can I turn the parent unit display screen off but keep hearing sounds from the baby unit? Yes, press | LCD ON/OFF on the parent unit to turn off the screen. The parent unit display will also dim automatically after being inactive for some time. In both instances, you will still be able to hear all sounds from the baby unit. Press any key to turn the screen back on. Why is the baby unit not responding normally? Try the following (in the order listed) for a common cure: 1. Disconnect the power to the baby unit. 2. Wait a few minutes before connecting power back to the baby unit. 3. Reboot the parent unit. Why is my screen in black and white? The baby unit has a light sensor that measures ambient light. When the ambient light is dim, such as during night time or in a dark room, the baby unit activates its infrared LEDs, and displays the camera images in black and white night vision. Why does my baby unit show offline? Why is the connection lost every now and then? The baby unit may have lost connection to the Wi-Fi router. Check your network and router settings. Other electronic products may cause interference with your baby unit. Try installing your baby unit as far away from these electronic devices as possible. Why can’t I hear a sound/Why can’t I hear my baby crying? The parent unit speaker volume may be too low. Press on the parent unit to increase the volume. You may have set a low sound sensitivity level. Set the sound sensitivity to a higher level. For details, go to www.vtechphones.com for online help topics. Frequently asked questions General product care Storage mount the baby unit (optional) 1. Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit). NOTESNOTE Notes • Check for reception strength and camera angle of the baby unit before drilling the holes. • The types of screws and plugs you need depend on the composition of the wall. You may need to purchase the screws and plugs separately to mount your baby units. 2. If you drill the holes into a stud, go to step 3. • If you drill the holes into an object other than a stud, insert the wall plugs into the holes. Tap gently on the ends with a hammer until the wall plugs are flush with the wall. 3. Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole. 3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed. 4. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place. 5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket. Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket. Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle. OR 4. Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the baby unit and a power supply. 1 2 Need help? Use your smartphone or mobile device to access our online help. • Go to https://help.vtechphones.com/RM5766HD or https://help.vtechphones.com/RM5766-2HD; OR • Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to be redirected to the online help page. -If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until the image is clear. If you would like to contact us, visit https://help.vtechphones.com/cs. You can also call our Customer Support at 1-844-848-8324 (1-844-84-VTECH) [in US] or 1-888-211-2005 [in Canada] for help. Test the sound level and position the baby monitor Basic operation S m For instructions and guides to make the best use of your baby monitor, and for the latest information and support, check out our online help topics and FAQs. The online help page will also be updated periodically to reflect product system updates. If you plan to install your baby unit in a designated location, and use your home Wi-Fi network to connect your video monitor, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. After you have powered on your parent unit, you can use your parent unit’s Wi-Fi signal indicator to assist in checking. Once you have identified the suitable location, you can install your baby unit. Adjust the distance between your baby unit and the Wi-Fi router if needed. • Surroundings and obstructing factors, such as distance, electrical appliances, and internal walls, may reduce Wi-Fi signal. test the location for the baby unit Talk to your baby via the baby unit 1. Press and hold th…

Text truncated - open the document above for the full version.

Form: RFT-AMER-TCB- OP-19o Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both VTech Communications, Inc. (“Agent”) and VTech Telecommunications Ltd. (“Applicant”) acknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I Michael Tsui HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC & Intertek if there is any change in the status identified above. Applicant Company Name Contact Name Address Telephone No Email FCC ID Applicant FRN : VTech Teleco mmunications Ltd. : Michael Tsui : 23/F, Tai Ping Indust rial Centre, Block 1, 57 Ting Kok Rd, Tai Po, Hong Kong : +852 2680 5398 : [email protected] : EW780-2529-01A : 0015973951 Signature: ____________________________________ 3 March 2023 Date: ____________________________________ I Chris Conrad HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to all certification applications to the FCC submitted by above applicant and agree to immediately notify the FCC & Intertek if there is change in this representation. Agent Company Name : VTech Communications, Inc. Contact Name : Chris Conrad Address : 9020 SW Washington Square Road, Tigard OR 97223 Telephone No : +1(503) 596-1212 Email : [email protected] Agent FRN : 0033411265 Signature: ____________________________________ 3 March 2023 Date: ____________________________________

Form: RFT-AMER-TCB-OP-19n Revision: 1 Page 1 of 1 Date: 1/25/2023 Attention: Application Examiner Re: Covered List, located at https://www.fcc.gov/supplychain/coveredlist and 47 CFR parts §2.903 and §2.911(d)(5)(ii) of the FCC rules Applicant: VTech Telecommunications Ltd. FCC ID: EW780-2529-01A To whom it may concern, VTech Telecommunications Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to 47 CFR part §2.903 of the FCC rules and does not originate directly or indirectly from any company named on the covered list located in the link above or any subsidiary or affiliate thereof. Applicant further certifies that, as of the date of the filing of the application, the Applicant is not identified on the Covered List as an entity producing “covered” equipment and is not a subsidiary or affiliate of any such entity pursuant to 47 CFR part §1.50002 and required by 47 CFR part §2.911(d)(5)(ii) of the FCC rules. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant and agree to immediately notify Intertek if there is any change in the status identified above. ______________________________ [Signature of authorized Proprietor, Partner or Authorized Officer] Mr. Michael Tsui Approbation Supervisor VTech Telecommunications Ltd. 25 January 2024

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Sep. 27, 2017 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Terry Chan/ Koo Wai Ip/ Kenneth Wong/ Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Oct 16, 2023 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-2529-01A Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (External) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (External)

INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal) INTERTEK TESTING SERVICES FCC ID: EW780-2529-01A IC: 1135B-80252901A Equipment Photographs (Internal)

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 40 SPECIFIC ABSORPTION RATE (SAR) EVALUATION REPORT Report No.: 23120202HKG-001 For Video Baby Monitor - Parent Unit Model: RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU Brand Name: vtech FCC ID: EW780-2529-01A Prepared for VTech Telecommunications Ltd. 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. PREPARED AND CHECKED BY: APPROVED BY: Signed On File Ma King Hang Assistant Engineer Date: December 28, 2023 Tang Kwan Mo, Jess Lead Engineer Date: December 28, 2023 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120202HKG-001 Page 2 of 40 TABLE OF CONTENTS 1 Test Result Summary ............................................................................................... 3 2 General Information ................................................................................................ 4 3 SAR Measurement System Description .................................................................... 8 4 Tissue Verificaiton .................................................................................................. 16 5 SAR Measurement System Verification .................................................................. 19 6 SAR Evaluation ....................................................................................................... 21 7 Test Equipment List ................................................................................................ 34 8 Measurement Uncertainty ..................................................................................... 35 9 E-Field Probe and Dipole Antenna Calibration ........................................................ 36 APPENDIX A – System Check Data ............................................................................. 37 APPENDIX B – SAR Evaluation Data ............................................................................ 38 APPENDIX C – E-Field Probe and Dipole Antenna Calibration ..................................... 39 APPENDIX D – SAR SYSTEM VALIDATION ................................................................... 40 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120202HKG-001 Page 3 of 40 1. TEST RESULT SUMMARY Applicant: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Brand Name: vtech Description of EUT: Video Monitor - Parent Unit Model: RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU FCC ID: EW780-2529-01A Serial Number: N/A Test Device: Production Unit EUT Exercising Software: ComTestSerial Version 3.0.0.108 Exposure Category: Sample Receive Date: General Population/Uncontrolled Exposure December 6, 2023 Date of Test: December 7, 2023 to December 11, 2023 Test Location: Workshop No. 3, G/F., World-Wide Industrial Centre, 43-47 Shan Mei Street, Fo Tan, Sha Tin, N.T., Hong Kong SAR, China. Environmental Conditions: Temperature: +18 to 25°C Humidity 25 to 75% Test Specification: ANSI/IEEE C95.1 IEEE Std 1528: 2013 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D01 v01r04 FCC KDB Publication 865664 D02 v01r02 The maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Band Operating Mode TX Frequency (MHz) Highest Reported SAR In-front-of mouth 2.4GHz FHSS Data 2406 – 2475 0.234 W/kg This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment / general population exposure limits specified in ANSI/IEEE C95.1. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23120202HKG-001 Page 4 of 40 2. GENERAL INFORMATION 2.1. Description of Equipment Under Test (EUT) Manufacturer: VTech (Dongguan) Telecommunications Limited Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. Device Dimension (L x W): 157(mm) x 77(mm) Device Thickness: 24(mm) Antenna Gain: 2dBi Operating Configuration(s) / Mode: In-front-of mouth (Data) Body (Data) TX Frequency (MHz): 2406 - 2475MHz Duty Cycle*: 9.7% H/W Version: N/A S/W Version: N/A Battery Type: 3.7VDC 5000mAh Li‐ion rechargeable Battery Body-worn Accessories: N/A Remark: The models RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU are the same as the model RM5766HD PU in hardware aspect. The difference in model number represents different color as declared by client. Model Number Remarks RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU 1 Parent Unit The production units are required to conform to the initial sample as received when the units are placed on the market. *Note: 1. Worst case was selected to present by client request. SAR…

Text truncated - open the document above for the full version.

TEST REPORT 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 27 Report No.: 23100158HKG-004 Application For Original Grant of 47 CFR Part 15 Certification New Family of RSS-247 Issue 3 Equipment Certification Video Baby Monitor FCC ID: EW780-2529-01A IC: 1135B-80252901A Prepared and Checked by: Approved by: Signed on File Leung Chun Ning, Peter Assistant Engineer Wong Cheuk Ho, Herbert Assistant Supervisor Date: November 28, 2023 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23100158HKG-004 Page 2 of 28 GENERAL INFORMATION Grantee: VTech Telecommunications Ltd. Grantee Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong. Manufacturer Name: VTech (Dongguan) Telecommunications Limited Manufacturer Address: VTech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan, Guangdong, China. FCC Specification Standard: FCC Part 15, October 1, 2022 Edition FCC ID: EW780-2529-01A FCC Model(s): RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU IC Specification Standard: RSS-247 Issue 3, August 2023 RSS-Gen Issue 5 Amendment 2, February 2021 IC: 1135B-80252901A HVIN: 35-400517PU VTech Model(s): RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU PMN: RM5766HD PU, RM5766-2HD PU, RM5866HD PU, RM5866-2HD PU Type of EUT: Spread Spectrum Transmitter Description of EUT: Video Baby Monitor Sample Receipt Date: October 24, 2023 Date of Test: October 24, 2023 to November 23, 2023 Report Date: November 28, 2023 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-247 Issue 3 Certification. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 23100158HKG-004 Page 3 of 28 TABLE OF CONTENTS EXHIBIT 1 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE .................................. 4 1.1 Summary of Test Results ...........................................................................................4 1.2 Statement of Compliance ..........................................................................................4 EXHIBIT 2 GENERAL DESCRIPTION ....................................................................................... 5 2.1 Product Description ..................................................................................................5 2.2 Test Methodology .....................................................................................................5 2.3 Test Facility ...............................................................................................................5 2.4 Related Submittal Grants ..........................................................................................5 EXHIBIT 3 SYSTEM TEST CONFIGURATION ........................................................................... 6 3.1 Justification ...............................................................................................................6 3.2 EUT Exercising Software ............................................................................................7 3.3 Details of EUT and Description of Accessories ..........................................................8 3.4 Measurement Uncertainty ...............................…

Text truncated - open the document above for the full version.