EW780-2655-00Video Monitor - Baby Unit

For operations and guides to help you use your video monitor, and for the latest information and support, check out our online help topics and online FAQs.Use your smartphone or mobile device to access our online help.• Go to https://help.vtechphones.com/vm924 or https://help.vtechphones.com/vm924-2 ; OR • Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to be redirected to the online help page. - If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear. You can also call our Customer Support at 1 (800) 595-9511 [in US] or 1 (800) 267-7377 [in Canada] for help. Overview - Baby unit Need help? S m VM924 VM924-2 1 Light sensor 2 Camera 3 Infrared LEDs 4 Microphone 5 POWER LED light 6 ON/OFF switch 7 Speaker 8 Antenna 9 Power jack 10 Slots for wall mounting 11 PAIR/RESET key• The parent unit and baby unit(s) provided are already paired. Specifications are subject to change without notice. © 2022 VTech Communications, Inc. All rights reserved. 01/22. VM924-X_QSG_V1. VM924 VM924-2 Pan and Tilt Video Baby Monitor Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news. 1 Connect the baby monitor What’s in the box 4 Status check Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on. 3 Positioning the baby monitor Strangul atio n Hazard Keep t hi s cor d out of rea c h of c h ildren. T he co r d needs to b e a t least t hr ee feet awa y fr o m t h e child at al l tim es. Do not use wit h an e x tensi on cord. Do not r emov e this tag. É loi gn e z c e co r don des enfants . L e cordo n do it s e tr ouver à au m oins tr ois pieds d’un enfa nt et ce, en tout temps. N’ utilisez pas de ral longe. N e ret ire z pas ce tte é tiqu et te . Mant eng a este cabl e f uera de la alcance de los niño s. Este cable de be est a r po r lo menos tres pies fuera de l a alcance del niño en todo mom ento. No l o us e con una e xt ensión i n al á mb rica. No qu ite e st a et i queta. Risque d ’étr anglement Riesgo de e strangul ación Strangul at io n Ha zard Keep t his cor d o ut o f r each of c hil d ren . The cord needs to be a t least three f e e t awa y fro m the c hil d at al l time s. Do not u s e w it h an e x t ens ion cord . Do not rem ove this tag. Éloignez ce cordon des e nf ants. L e cordon doit se trou ver à au mo ins t rois pieds d’un e n fant et c e, en t out tem ps . N ’ut i lisez pas d e r a llo ng e . Ne r e t i r ez pas c et te éti qu ette . M ant enga e st e cabl e fuer a de la alc a nce d e los niños. Es t e c able debe estar p or lo me nos t re s pie s f uera d e la alcanc e de l ni ño e n to do momento . No l o use c on una e xt e ns ión inalá m brica. No quite es ta eti quet a. Risque d’ étr ang l em ent Riesgo de estr an gulació n Quick start guide Technical specifications Credits:The Background Noise sound file was created by Caroline Ford, and is use d under the Creative Commons license. The Stream Noise sound file was created by Caroline Ford, and is use d under the Creative Commons license. The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license. The Heart Beat sound file was created by Zarabadeu, and is used un der the Creative Commons license. The applied nameplate is located at the bottom of the baby unit’s base.When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:1. Follow all warnings and instructions marked on the product. 2. Adult setup is required.3. CAUTION: Do not install the baby unit at a height above 2 meters. 4. This product is not a substitute for adult super vision of the infant. Supervising the infant is the parent’s or c aregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue wo rking properly for any given period of time. Further, thi s is not a medical device and should not be used as such. Th is product is intended to assist you in supervising yo ur baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is use d for the parent unit. The battery cannot be subjected to hig h or low extreme temperature and low air pressure at high al titude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environme nt can result in an explosion or the leakage of flammab le liquid of gas. Battery subjected to extremely low air pres sure may result in an explosion or the leakage of flammable l iquid or gas. Dispose of used battery according to the infor mation in The RBRC sea l. 7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Parent unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Baby unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EUS05100 Rechargeable battery information: Zhuhai Great Power Energy Co., Ltd. Li-ion battery, 3.6V, 2600mAh, 9.36Wh; Model: ICR18650-2.6Ah-3.6V-1S1P 8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be ea…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification Sep. 27, 2017 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd do hereby authorize Intertek Testing Services (Terry Chan/ Koo Wai Ip/ Kenneth Wong/ Jess Tang) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Jan 27, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-2655-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (External) INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (External)

BU 50# UL Approved PET BU LABEL SIZE: 35X21 mm Model: VM924 BU S/N: YYWWXXXXXXX FCC ID: EW780-2655-00IC: 1135B-80265500 HVIN: 35-201855BU MANUFACTURED IN CHINAwww.vtechphones.com VTech Customer Service 1-800-595-9511 4.43mm A/V I.C.T.E. A/V I.C.T.E. Model: VM924 BU S/N: YYWWXXXXXXX MANUFACTURED IN CHINAwww.vtechphones.com VTech Customer Service 1-800-595-9511 A/V I.C.T.E. FCC ID: EW780-2655-00IC: 1135B-80265500 HVIN: 35-201855BU Model: VM924-2 BU S/N: YYWWXXXXXXX FCC ID: EW780-2655-00IC: 1135B-80265500 HVIN: 35-201855BU MANUFACTURED IN CHINAwww.vtechphones.com VTech Customer Service 1-800-595-9511 A/V I.C.T.E.

INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22010932 Equipment Photographs (Internal)

INTERTEK TESTING SERVICE FCC ID: EW780-2655-00 MPE Analysis Report The Equipment-Under-Test (EUT) is a Video Monitor - Baby Unit. It has a microcontroller and 2.4GHz RF module. The EUT is powered by a 5V AC AC/DC adaptor. For Maximum Permissible Exposure (MPE) evaluation of the unit, the maximum power density at 20 cm from this transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. For the 2.4GHz RF portion of the unit, the measured powers among all the measured channels were within its production tolerance. The antenna gain is 2 dBi = 1.58 (num gain) and its maximum source-based time-averaging duty factor is 100%. From these data and its operating configuration, the exposed power density at a distance (R) of 20 cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The EIRP radiated power = conducted power (with maximum tolerance) + antenna gain = 18 dBm + 2 dBi = 20 dBm (100 mW) The radiated (EIRP) source-based time-averaging output power = (100 * 1) mW = 100 mW The power density at 20 cm from the antenna = EIRP / 4 πR^2 = 0.02 mW cm-2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the Baby unit at least 20cm from nearby persons.”

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 42 TEST REPORT Report Number: 22010932HKG-001 Application for Original Grant of 47 CFR Part 15 Certification New Family of RSS-247 Issue 2 Equipment (Baby Unit) FCC ID: EW780-2655-00 IC: 1135B-80265500 Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Wong Kwok Yeung, Kenneth Assistant Supervisor Date: June 06, 2022 TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 22010932HKG-001 Page 2 of 42 GENERAL INFORMATION Applicant Name: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong FCC Specification Standard: FCC Part 15, October 1, 2020 Edition FCC ID: EW780-2655-00 FCC Model(s): VM924 BU, VM924-2 BU IC Specification Standard: RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 2, February 2021 IC: 1135B-80265500 HVIN: 35-201855BU PMN: VM924 BU, VM924-2 BU Vtech Model(s): VM924 BU, VM924-2 BU Type of EUT: Spread Spectrum Transmitter Description of EUT: Video Monitor - Baby Unit Sample Receipt Date: January 21, 2022 Date of Test: January 21, 2022 to May 24, 2022 Report Date: June 06, 2022 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-247 Issue 2 Certification. TEST REPORT VTech Telecommunications Ltd. Intertek Report No: 22010932HKG-001 Page 3 of 42 TABLE OF CONTENTS 1.0 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE ............................................ 4 1.1 Summary of Test Results ................................................................................................. 4 1.2 Statement of Compliance ................................................................................................ 4 2.0 GENERAL DESCRIPTION ................................................................................................ 5 2.1 Product Description......................................................................................................... 5 2.2 Test Methodology ........................................................................................................... 5 2.3 Test Facility ..................................................................................................................... 5 3.0 SYSTEM TEST CONFIGURATION ..................................................................................... 6 3.1 Justification ..................................................................................................................... 6 3.2 EUT Exercising Software .................................................................................................. 7 3.3 Details of EUT and Description of Accessories ................................................................. 8 3.4 Measurement Uncertainty .............................................................................................. 8 4.0 TEST RESULTS ............................................................................................................... 9 4.1 Maximum Conducted Output Power at Antenna Terminals ........................................... 9 4.2 Maximum 20 dB RF Bandwidth ..................................................................................... 12 4.3 Minimum Number of Hopping Frequencies .................................................................. 15 4.4 Minimum Hopping Channel Carrier Frequency Separation ........................................... 17 4.5 Average Channel Occupancy Time ................................................................................ 19 4.6 Out of Band Conducted Emissions ................................................................................ 21 4.7 Field Strength Calculation.............................................................................................. 27 4.8 Transmitter Radiated Emissions in Restricted Bands and Spurious Emissions ............... 28 4.8.1 Radiated Emission Configuration Photograph ............................................................ 29 4.8.2 Radiated Emission Data .............................................................................................. 29 4.8.3 Radiated Emission Test Setup ..................................................................................... 30 4.9 AC Power Line Conducted Emission .............................................................................. 35 4.9.1 AC Power Line Conducted Emission Configuration Photograph ................................. 35 4.9.2 AC Power Line Conducted Emission Data ..................................................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK22010932 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22010932 Configuration Photographs Worst-Case Radiated Emissions (Rear View) INTERTEK TESTING SERVICE Report No: HK22010932 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22010932 Configuration Photographs Worst-Case Radiated Emissions (Rear View)

INTERTEK TESTING SERVICE Report No: HK22010932 i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22010932 ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) INTERTEK TESTING SERVICE Report No: HK22010932 iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View)