EW780-2771-00Soother

Quick Start Guide(Canada version) What’s in the box 3 Before use BC8213 Baby Sleep Soother Important safety instructions NONO Note • T o avoid interference from other electronic devices, place your soother at least 3 feet (1 metre) away from devices such as wireless routers, microwaves, cell phones and computers. The applied nameplate is located at the bottom of thesoother’s base.When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. This product is not a substitute for adult super vision of the infant. Supervising the infant is the parent ’s or caregiver’s responsibility. This product could ceas e operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. 4. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 5. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the soother. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC sea l. 6. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. Power adapter information: Input: 100-240V~50/60Hz 0.5A Output: 5V DC 1.5A VTech Telecommunications Ltd. Model: VT07EUS05150 Rechargeable battery information: Zhuhai Great Power Energy Co., Ltd. Li-ion battery, 3.6V, 2600mAh, 9.36Wh; Model: ICR18650-2.6Ah-3.6V-1S1P 7. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet. 8. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 9. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Us e a damp cloth for cleaning. 10. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 11. Do not allow anything to rest on the power cord s. Do not install this product where the cords may be walked on or crimped. 12. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 13. Do not overload wall outlets or use an extensio n cord. 14. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 15. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 16. Never push objects of any kind into this produc t through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 17. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 18. Periodically examine all components for damage.19. There is a very low risk of privacy loss when using certain electronic devices, such as soothers baby monitorsetc. To protect your privacy, make sure the product has never been used before purchase, reset the soother periodically by powering off and then powering on the unit, and power off the soother if you will not use it for some time. 20. Children should be supervised to ensure that they do not play with the product. 21. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. SAVE THESE INSTRUCTIONSCautions1. Use and store the product at a temperature between 0 o C (32 o F) and 40 o C (104 o F). 2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source. 3. Warning—Strangulation Hazard— Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 0.9m (3 ft) away). Do not remove this tag. 4. Never place the soother inside the baby’s crib or playpen. Never cover the soother with anything such as a towel or a blanket. 5. Other electronic products may cause interference with your soother. Try installing your soother as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones. 6. Do not allow your child or anyone to look directly into the projector lens while it is turned on to avoid p…

Text truncated - open the document above for the full version.

Appe nd ix B1 Letter of Agency for FCC Certification June 05, 2021 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Limited do hereby authorize Intertek Testing Services (Ms. Jess Tang / Mr. Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Michael Tsui Approbation Supervisor

VTech Telecommunications Ltd Nov 07, 2022 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-2771-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd . and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Michael Tsui Approbation Supervisor

INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (External)

LBL SIZE : 37.5 x 14.5 mm MATERIIAL: 50# PET P/N:92-038274-030-100 P/N:92-038348-000-100 LBL SIZE : 37.5 x 14.5 mm MATERIIAL: 50# PET BC8213 FCC ID:EW780-2771-00 HVIN:35-201882 IC: 1135B-80277100 BC8213 FCC ID:EW780-2771-00 HVIN:35-201882 IC: 1135B-80277100 BT ID: V-Hush Mini_xxxx S/N: XXXXXXXXXXX

INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK22100724 Equipment Photographs (Internal)

INTERTEK TESTING SERVICE FCC ID: EW780-2771-00 MPE Analysis Report The Equipment Under Test (EUT) is a soother. The EUT is powered by 110-240VAC. For Maximum Permissible Exposure (MPE) evaluation of the unit, the maximum power density at 20 cm from this transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. For the Bluetooth portion of the unit, the measured powers among all the measured channels were within its production tolerance. The maximum source-based time-averaging duty factor is 100%. From these data and its operating configuration, the exposed power density at a distance (R) of 20 cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The EIRP radiated power = conducted power (with maximum tolerance) + antenna gain = 8 dBm + 0 dBi = 8 dBm (6.3 mW) The radiated (EIRP) source-based time-averaging output power = (6.3 * 1) mW = 6.3 mW The power density at 20 cm from the antenna = EIRP / 4 πR^2 = 0.00125 mW cm-2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the unit at least 20cm from nearby persons.”

[VTECH BC8213] [2400MHz Monopole Antenna] Model: BC8213 Coordination: Antenna Description: This monopole antenna is optimized and used in the BC8213. This antenna is directly soldered to the RF output on the main PCB. Model Number Description BC8213 2400MHz Monopole Antenna Antenna Specification: Item Specification Operating Frequency 2402MHz - 2480MHz Maximum Gain 0 dBi Antenna Type Monopole antenna Operation Bandwidth 78MHz Nominal Impedance ~50 Ohm Connectors NA Dimensions See details below Maufacturer Vtech Telecommunications Ltd Manufacturer Address 23/F, Tai Ping Industrial Centre, Blk1, 57 Ting Kok Road, Tai Po, Hong Kong Model Number ANT-BC8213-P-BT-1 [VTECH BC8213] [2400MHz Monopole Antenna] Antenna Pattern (2440MHz): Max antenna gain is 0dBi. Antenna Gain -60 -50 -40 -30 -20 -10 0 10 Vertical Horizontal Antenna Dimensions:

INTERTEK TESTING SERVICE Report No: HK22100724 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22100724 Configuration Photographs Worst-Case Radiated Emissions (Rear View) INTERTEK TESTING SERVICE Report No: HK22100724 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22100724 Configuration Photographs Worst-Case Radiated Emissions (Rear View)

INTERTEK TESTING SERVICE Report No: HK22100724 i Configuration Photographs Worst-Case Line-Conducted Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK22100724 ii Configuration Photographs Worst-Case Line-Conducted Emissions (Rear View) INTERTEK TESTING SERVICE Report No: HK22100724 iii Configuration Photographs Worst-Case Line-Conducted Emissions (Side View)