EW780-9041-001.9GHz Digital Modulation Cordless Phone

 CS6199-4 DECT 6.0 cordless telephone Table of contents Parts checklist .............................2 Telephone base and charger installation ................................2 Battery installation .......................3 Battery charging ..........................3 Handset overview ........................4 Telephone base overview............4 Using the menu ...........................5 Telephone settings ......................5 Telephone operation....................5 Directory ......................................7 Caller ID.......................................8 About answering system and voicemail ..................................8 Answering system settings ..........9 Answering system operation .......9 Troubleshooting .........................0 Important safety instructions...... Precautions for users of implanted cardiac pacemakers ................ Operating range.........................2 ECO mode .................................2 Maintenance ..............................2 About cordless telephones ........2 The RBRC ® seal ........................2 Limited warranty ........................2 FCC, ACTA and IC regulations ...3 Technical specifications.............4 Introduction To help protect the environment, this Abridged user’s manual provides you with the basic installation and use instructions. A limited set of features are described in abbreviated form. Please refer to the online Complete user’s manual for a full set of installation and operation instructions at www.vtechphones.com. Before using this VTech product, please read Important safety instructions on pages  and 2 of this user’s manual. The ENERGY STAR ® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR ® label indicating it meets the latest energy efficiency guidelines. T Compatible with Hearing Aid T-Coil TIA-1083 Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license. Abridged user’s manual 2 Parts checklist Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Telephone base and charger installation Install the telephone base and charger as shown below. Use only the power adapters and batteries supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call  (800) 595-95. In Canada, go to www.vtechcanada.com or call  (800) 267-7377. • Telephone base Charger Electrical outlet (not controlled by a wall switch) Telephone base power adapter Telephone line cord Telephone wall jack A DSL filter (not included) is required if you have DSL high- speed Internet service. The DSL filter must be plugged into the telephone wall jack. Telephone line cord Telephone base power adapter Handset (4 for CS699-4) Battery (4 for CS699-4) Battery compartment cover (4 for CS699-4) Charger and charger adapter (3 for CS699-4) Telephone base Abridged user’s manual Abridged user’s manual Quick start guide Quick start guide Charger adapter Electrical outlet (not controlled by a wall switch) 3 Battery charging Once you have installed the battery, the screen indicates the battery status (see the table below). For best performance, keep the handset in the telephone base or charger when not in use. The battery is fully charged after  hours of continuous charging. Battery indicatorsBattery statusAction The screen is blank, or displays Put in charger and flashes. The battery has no or very little charge. The handset cannot be used. Charge without interruption (at least 30 minutes). The screen displays Low battery and flashes. The battery has enough charge to be used for a short time. Charge without interruption (about 30 minutes). The screen displays HANDSET X. The battery is charged.To keep the battery charged, place it in the telephone base or charger when not in use. Battery installation Install the battery as shown below. Plug the battery connector securely into the socket. .Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. 2. Slide the battery compartment cover towards the center of the handset until it clicks into place. 3.Place the handset in the telephone base or charger to charge. 4. 4 Handset overview Telephone base overview CID//VOLUME Review the caller ID log when the phone is not in use. Decrease the listening volume during a call or message playback. Scroll down while in a menu, or in the directory, caller ID log or redial list. Move the cursor to the left when entering numbers or names. • • • • /FLASH Make or answer a call. Answer another incoming call during a call. • • MUTE/DELETE Mute the microphone during a call. Delete digits or characters while using the dialing keys. Silence the ringer temporarily while the handset is ringing. Delete the displayed entry while in the directory, caller ID log or redial list. • • • • //VOLUME Review the directory when the phone is not in use. Increase the listening volume during a call or message playback. Scroll up while in a menu, or in the directory, caller ID log or redial list. Move the cursor to the right when entering numbers or names. • • • • MENU/SELECT Show the menu. While in a menu, press to select an item, or save an entry or setting. • • OFF/CANCEL Hang up a call. Silence the ringer temporarily while the handset is ringing. Press and hold to erase the missed call indicator while the phone is not in use. Press to return to the previous menu, or press and hold to return to idle mode, without making changes. • • • • REDIAL/PAUSE Press repeatedly to review the redial list. Press and hold to insert a dialing pause while dialing or entering a number. • • Q…

Text truncated - open the document above for the full version.

VTech Telecommunications Ltd Date: July 18, 2012 To whom it may concern, Declarations FCC ID: EW780-9041-00 I, the undersigned, hereby declare that 1. The device does not use the provisions of 47CFR 15.323 (c) (6), random waiting mechanism is not used in this system. 2. The provisions of 47CFR 15.323 (c) (10) and 47CFR 15.323 (c) (11) are not used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. 3. Only the handset will act as the initiating device, which will initiate the establishment of the duplex connection. 4. The device complies with the provisions of 47CFR 15.319(f). The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude transmission of control and signaling information or use of repetitive codes used by certain digital technologies to complete frame or burst intervals. The following table explains the reaction of device in case of either absence of information to transmit or operational failure after a connection of its companion device is established. Circumstances Reaction of Base Unit Reaction of Handset 1 Switch-off companion device NA NA 2 On Hook by companion device B NA 3 Switch-off device NA NA 4 On Hook on device side NA C 5 Remove power from device A C 6 Remove power from companion device B A A – Connection is terminated and, transmission ceases. B – Connection is terminated but device transmits control or signaling information. C – Connection is terminated but companion device transmits control or signaling information. NA – Not applicable If you have questions or need further information, please contact the undersigned. Regards, Name: Samson Man Title: Approbation Supervisor

VTech Telecommunications Ltd July 18, 2012 To whom it may concern, Label Location Justification FCC ID: EW780-9041-00 Request is hereby submitted by VTech Telecommunications Ltd. to request an alternative method of positively identifying the equipment, pursuant to 47 CFR § 2.925(f) of the FCC Rules. The FCC identifier for handset will be placed in the battery compartment and the following requirements are confirmed to meet: a) The FCC identifier will visible at the time of purchase, by either of the following approaches: • Marketing the device without the battery installed, or • Providing instruction (stated on the box, user manual, or additional documentation) directing the user as to where to find the FCC label. b) The user accessible area will not require any special tools for access and the FCC label will not be placed on a removable part. The user manual has already included the FCC statements, pursuant to 47 CFR § 15.19(a)(3), 15.21 and 15.105(b). If you have questions or need further information, please contact the undersigned. Sincerely, Samson Man Approbation Supervisor

VTech Telecommunications Ltd Appendix B1 Letter of Agency for FCC Certification July 18, 2012 To whom it may concern, Letter of Agency I, an officer of VTech Telecommunications Ltd. do hereby authorize Intertek Testing Services (Mr. Ken Sit/ Mr. Melvin Nip) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and/or Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C., 862. Regards, Samson Man Approbation Supervisor

VTech Telecommunications Ltd July 18, 2012 To whom it may concern, Request for Permanent Confidentiality Under FCC Part 15 Certification FCC ID: EW780-9041-00 Request is hereby submitted by VTech Telecommunications Ltd. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR § 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential and VTech Telecommunications Ltd. reserves the right to discern which parties can obtain access to these information: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description The rationale for request for confidentiality is as followings: This information represents intellectual property of VTech Telecommunications Ltd. and it is subject to competition. We have invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Regards, Samson Man Approbation Supervisor

INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9041-00 external photos - 1 of 2 HK12070743 Job Number HK12070743 Job Number INTERTEK TESTING SERVICES External Photos FCC ID: EW780-9041-00 external photos - 2 of 2 HK12070743 Job Number

CS6199-4 ENGRAVING FFILE Model: CS6199-4SN:XXXXXXXXXXXX CAUTION FCC ID: EW780-9041-00 Use Only Supplied Battery or Battery BT283342 HS SN LABEL 20X10mm Engraving Engraving Engraving ENGRAVING LABEL UL APPROVAL PET 72x37mm CHARGER AC 6V Use Only Supplied Adapter CORDLESS TELEPHONE AC 6V 300mA VTech Customer Service 1-800-595-9511 www.vtechphones.com 4H20 Accessory TEL. LINE Use Only Supplied Adapter DC 6V SN LABEL 28X10mm BS Model: CS6199-4 S/N: XXXXXXXXXXXXXXXXXXXX COMPLIES WITH 47 CFR PART 68 REGISTRATION No.: US:EW7W405B80-904100 RINGER EQUIVALENCE: 0.5B USOC JACK: RJ11C/RJ11W THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING THIS PHONE. CORDLESS TELEPHONE DC 6V 400mA VTECH TELECOMMUNICATIONS LTD. MANUFACTURED IN CHINA 4H20 HAC FCC ID : EW780-9041-00 VTech Customer Service 1-800-595-9511 www.vtechphones.com

INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 1 of 8 Base Unit assembly Base Unit Main PCB comp side (View 1) INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 2 of 8 Base Unit Main PCB comp side (View 2) Base Unit Main PCB solder side INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 3 of 8 Base Unit Antennas Base Unit DAM PCB front side INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 4 of 8 Base Unit DAM PCB rear side Base Unit Page Key PCB front side INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 5 of 8 Base Unit Page Key PCB rear side Base Unit Oscillator PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 6 of 8 Handset assembly Handset Main PCB comp side INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 7 of 8 Handset Main PCB display side (View 1) Handset Main PCB display side (View 2) INTERTEK TESTING SERVICES Internal photos FCC ID: EW780-9041-00 internal photos - 8 of 8 Handset Oscillator PCB comp side

©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 1 of 60 A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l：886-3-271-0188 / Fax：886-3-271-0190 SAR EVALUATION REPORT Test Report No. ： 1207FS22-01 Applicant ： VTech Telecommunications Ltd EUT Type ： 1.9GHz DECT6.0 Cordless Phone FCC ID ： EW780-9041-00 Trade Name ： vtech Model Number ： CS6199-4 Dates of Receive ： Jul. 25, 2012 Dates of Test ： Jul. 25~26, 2012 Date of Issued ： Jul. 31, 2012 Test Environment ： Ambient Temperature： 22 ±2 ° C Relative Humidity：40 - 70 % Test Specification ： Standard C95.1-1992 IEEE Std. 1528-2003 IEEE Std. 1528a-2005 2.1093;FCC/OET Bulletin 65 Supplement C [July 2001] Max. SAR ： 0.024 W/kg UPCS Head SAR Test Lab Location ： Chang-an Lab 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. The test results in the report only apply to the tested sample. Approved By ： Tested By ： (Yung Tan Tsai ) (Bill Hu) Contents 1. Description of Equipment under Test (EUT) .................................................................................................. 3 2. Introduction .................................................................................................................................................... 4 3. SAR Definition ............................................................................................................................................... 4 4. SAR Measurement Setup .............................................................................................................................. 5 5. System Components ..................................................................................................................................... 6 5.1 DASY5 E-Field Probe System.............................................................................................................. 6 5.2 Data Acquisition Electronic (DAE) System ........................................................................................... 9 5.3 Robot .................................................................................................................................................... 9 5.4 Measurement Server ............................................................................................................................ 9 5.5 Device Holder for Transmitters........................................................................................................... 10 5.6 Phantom - SAM v4.0 .......................................................................................................................... 10 5.7 Data Storage and Evaluation...............................................................................................................11 6. Test Equipment List ..................................................................................................................................... 14 7. Tissue Simulating Liquids ............................................................................................................................ 15 7.1 Ingredients .......................................................................................................................................... 16 7.2 Recipes............................................................................................................................................... 16 7.3 Liquid Confirmation............................................................................................................................. 17 8. Meas urement Process................................................................................................................................. 18 8.1 Device and Test Conditions ................................................................................................................ 18 8.2 System Performance Check............................................................................................................... 19 8.3 Dosimetric Assessment Setup............................................................................................................ 22 8.4 Spatial Peak SAR Evaluation ............................................................................................................. 24 9. Measurement Uncertainty............................................................................................................................ 25 10. SAR Test Results Summary ........................................................................................................................ 28 10.1 Head SAR........................................................................................................................................... 28 10.2 Std. C95.1-1992 RF Exposure Limit................................................................................................... 29 11. Conclusion ................................................................................................................................................... 30 12. References .................................................................................................................................................. 30 Appendix A - System Performance Check .............................................................................................. 31 Appendix B - SAR Measurement Data.........................................................…

Text truncated - open the document above for the full version.

SAR EUT Photographs EUT Photo ( 1 ) EUT Photo ( 2 ) ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 1 of 4 EUT Photo ( 3 ) EUT Photo ( 4 ) ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 2 of 4 EUT Photo ( 5 ) EUT Photo ( 6 ) ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 3 of 4 EUT Photo ( 7 ) EUT Photo ( 8 ) ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 4 of 4

SAR Test Setup Photographs EUT Front side EUT Back side EUT Top side ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 1 of 3 Right Head Setup Figure 2. Right Head SAR Test Setup (Cheek) Figure 3. Right Head SAR Test Setup (Tilted) EUT Top side EUT Back side EUT Front side ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 2 of 3 Left Head Setup Figure 4. Left Head SAR Test Setup (Cheek) Figure 5. Left Head SAR Test Setup (Tilted) EUT Top side EUT Front side EUT Back side ©2012 A Test Lab Techno Corp. Report Number: 1207FS22-01Page 3 of 3

Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Test Report Number: HK12070743-1 Page 1 of 71 FCC ID: EW780-9041-00 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com GENERAL INFORMATION Applicant Name: VTech Telecommunications Ltd. Applicant Address: 23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, N.T., Hong Kong. FCC Specification Standard: FCC Part 15, October 1, 2010 Edition FCC ID: EW780-9041-00 FCC Model(s): CS6199-4, CS619Z-XY Type of EUT: Unlicensed Personal Communications Service Devices Description of EUT: 1.9GHz Digital Modulation Cordless Phone with Caller ID and Digital Answering Machine Serial Number: N/A Sample Receipt Date: July 17, 2012 Date of Test: July 20 – 24, 2012 Report Date: August 03, 2012 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Issuing Laboratory: Intertek Testing Services Hong Kong Limited Hong Kong Accreditation Service (HKAS) has accredited this laboratory under the Hong Kong Laboratory Accreditation Scheme (HOKLAS) for specific laboratory activities as listed in the HOKLAS directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. Test Report Number: HK12070743-1 Page 2 of 71 FCC ID: EW780-9041-00 Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Website: www.hk.intertek-etlsemko.com Table of Contents 1.0 Summary of Test Results & Statement of Compliance......................................... 5 1.1 Summary of Test Results ........................................................................................ 5 1.2 Statement of Compliance ........................................................................................ 6 2.0 General Description................................................................................................. 8 2.1 Product Description ................................................................................................. 8 2.2 Technical Description .............................................................................................. 8 2.3 Test Methodology.................................................................................................... 9 2.4 Test Facility............................................................................................................. 9 3.0 System Test Configuration.................................................................................... 11 3.1 Justification ........................................................................................................... 11 3.1 Justification - Continued ........................................................................................ 12 3.2 Conducted Emission Test Configuration ................................................................ 13 3.3 Conducted Monitoring and Operational Test Configuration.................................... 13 3.4 EUT Exercising Software....................................................................................... 13 3.5 Details of EUT and Description of Peripherals....................................................... 14 3.6 Measurement Uncertainty ..................................................................................... 14 4.0 Measurement Results............................................................................................ 16 4.1 Antenna Requirement........................................................................................... 16 4.2 Digital Modulation Techniques............................................................................... 16 4.3 Emission Bandwidth.............................................................................................. 17 4.4 Directional Gain of the Antenna ............................................................................. 20 4.5 Peak Transmit Power ............................................................................................ 21 4.6 Power Spectral Density ......................................................................................... 24 4.7 Automatic Discontinuation of Transmission............................................................ 27 4.8 Unwanted Emission Inside the Sub-Band .............................................................. 28 4.9 Emissions Outside the Sub-Band .......................................................................... 31 4.9.1 Radiated Emissions Configuration Photographs ................................................. 32 4.9.2 Radiated Emissions Data ................................................................................... 32 4.9.3 Field Strength Calculation................................................................................... 39 4.9.4 Average Factor Calculation and Transmitter ON Time Measurements ................ 40 4.10 AC Power Line Conducted Emissions ................................................................. 41 4.10.1 AC Power Line Conducted Emissions Configuration Photographs .................... 42 4.10.2 AC Power Line Conducted Emissions Data ...................................................... 42 4.11 Radio Frequency Radiation Exposure.................................................................. 45 4.12 Frame Repetition Stability .................................................................................. 46 4.13 Frame Peri…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9041-00 config photos (radiated emission - base unit) - 1 of 1 Radiated Emission - Base Unit Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Transmission FCC ID: EW780-9041-00 config photos (radiated emission - handset) - 1 of 1 Radiated Emission - Handset Front View Rear View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Talk FCC ID: EW780-9041-00 config photos (conducted emission) - 1 of 2 Conducted Emission Front View Right Side View INTERTEK TESTING SERVICES The Worst Case Configuration Photographs - Mode: Talk FCC ID: EW780-9041-00 config photos (conducted emission) - 2 of 2 Conducted Emission Left Side View